Fixing A GE Washer That Will Not Start: Lid Lock Replacement

[@CVZ31]

The link to the one you recommended does not work.

[@DuctTapeMechanic]

Looks like the link I posted got corrupted. I went back and added a pop-up link to the correct part. It should be around 5:32 mark in the video.

[@elainebittencourt8976]

@@DuctTapeMechanicI don’t see it. Can you just say which part is it so I can order it? My machine is stopping in the wash cycle, and I noticed it’s not locking, so I am hoping your recommendation will fix it.

[@DuctTapeMechanic]

@elainebittencourt8976 hi, the part pops up on the bottom of the screen in the video. It's a pop-up ad, and it will take you to the exact part

[@kc-a7907]

@@elainebittencourt8976 You will have to research your model number and get the part number to search for the compatible part.

[@paulinebrewer6576]

I have watched all around 5:32 of video. No link

[@sdfrieson]

Single mother of 4 here. I just followed you step by step and made the repair myself. Thank you and any blessings ❤

[@DuctTapeMechanic]

Awesome! It's comments like this that keep me motivated!

[@mercadomarcos]

This video is excellent. All DYI videos should be like this. Thank you for making it!!

[@DuctTapeMechanic]

Thank you 😊

[@kimjensen7165]

You are the only guy out there who explains things from top to bottom. Thank you

[@DuctTapeMechanic]

I appreciate the kind words!

[@rogerbennett8256]

You're just "AWEOME!" helping people deserves acknowledgement "THANK YOU for being KIND!!

[@DuctTapeMechanic]

Thank you for the encouragement!

[@jerrymoore3365]

Thank you sir! After watching this video, I was able to replace my defective GE Lid Lock switch for $12.95 and my labor vs calling for a service technician @ $80 just to show up. Thanks again!😎

[@DuctTapeMechanic]

Excellent! I'm glad to help!

[@nekamasterofalltrades1661]

I literally thank God for allowing me to find your video so I could fix my own washing machine. It just stopped working, and I was literally shocked because I had spent money doing other things, and a new washer was NOT in the plans. I tried to hire a company to repair it, but the rate was outrageous for me to pay when I knew the problem. I have the same brand and model. I purchased the part for $20.99 on Amazon. After watching your video, I repaired it myself in 10-15 mins, and the washer is working, and the load is already on the rinse cycle! Thank you very much. Be blessed! I will look out for more things from you in the near future. Thanks again!

[@DuctTapeMechanic]

That's wonderful! Glad it helped you

[@nekamasterofalltrades1661]

@@DuctTapeMechanic 🙌🙌🙌me too!

[@kananiakui-ramos4779]

did the part you ordered come connected with a black wire?

[@luciedoucet3167]

Because of your video, I was able to fix my washing machine myself! Thank you!

[@DuctTapeMechanic]

Glad I could help! Great job doing it yourself!

[@staceya.wilkerson2311]

I watched your video and fixed my washer, even a girl can do it, Video made it so easy to fix my washer. Ordered the part off Amazon for under $45 and replaced it myself with your step by step instructions on video. Thanks !!

[@DuctTapeMechanic]

Great job on getting your washer working! I'm glad you found it helpful

[@julietsnyder7382]

Also a woman here whose washer just went out. I’m pretty handy and confident I can fix mine after watching this video. I have this exact washer. Thank you!

[@AlwaysAMan78]

About tonsave me hundreds of dollars thank you

[@josephharrington3150]

Why should you have to fix it at all? I just bought one, did three loads and it stopped working. Warranty service in 10 day. What bullshit. Never GE again.

[@AlwaysAMan78]

@josephharrington3150 that's user error unless you bought used. My washer is 4 years old and I just replaced my lid lock for the first time

[@JulieJestus]

Great demo! Worked perfectly for us and saved our washer on New Year’s Eve! Thank you!!

[@DuctTapeMechanic]

I'm glad it worked out for you!

[@cliffknoll6226]

thanks for the link to amz and thanks for the straightforward explanation, especially the test in the back which i will do before ordering anything

[@DuctTapeMechanic]

Glad to have helped!

[@RyouConcord]

THANK YOU SO MUCH, MAN this washer is pissing me OFF! You, sir, are a gentleman, and a scholar.

[@DuctTapeMechanic]

You're welcome! I appreciate the kind words! Glad to help!

[@aneicer4705]

Those of us who own this piece of junk washer should file A class action lawsuit against ge for all the money we've spent trying to get this junk with the defective locking mechanism to work consistently. I'm SO ANGRY

[@DuctTapeMechanic]

These machines certainly have a lot of problems!

[@kylenuerge7975]

I will never buy another GE product. Absolute garbage.

[@Foreverfreedom-jl5ji]

I've had two of these pieces are garbage. I HATE them. Unfortunately it was the only washer available in the store!

[@NoahRyddle]

Agreed! My control board has been malfunctioning for months, and now it won’t work at all because the lid lock is busted, too. I know I can repair it, but I don’t want to spend the time and money to fix a piece of crap machine that doesn’t even clean clothes well in the first place!

[@0haianna]

If having a similar issue like washer will fill and then basically shut off won’t spin or drain is it still the lid lock that needs replaced? The lights for soak and wash aren’t lit up and doesn’t register if lid is open or closed

[@beyondlea]

This is happening to me but when i open the lid it fills after stopping then once its in wash i can close the lid. I have an older model though. Im also wondering if this will fix it.

[@lindavasquez6637]

Thank you, 75 years old woman got it replaced works great.

[@DuctTapeMechanic]

Awesome! Comments like these keep me motivated!

[@Cartoonjoker15]

I checked my lid lock with the lid closed and when i put the leads on the wires the numbers started at 72 then went down to 0.0 or 1. When i tested the lid lock with the lid open numbers appeared too, i think, i cant remember. You said with the lid closed it should be 90. Do you think my lid lock might be faulty?

[@nicolashubert924]

Just ordered my lid lock from amazon but i removed the older one i hope this work !! Thx for the video !!

[@DuctTapeMechanic]

Best of luck!

[@tonygaijin]

Was able to fix my washer. Thanks! Btw instead of using a putty knife to remove the white piece, just push it out from the bottom.

[@VinceBadovinatz88]

Hi thanks again for helping with your comments I can't seem to find a link to get the part I think I almost have the same washer you were messing with it's closed anyway did you say all the locks are the same Update I found one $14 I'm just going to go with the cheapy the reviews were okay

[@rosemercer212]

Thank you for the video! I fixed my washer today , it was pretty easy.

[@DuctTapeMechanic]

Awesome! Great job!

[@baawaa1949]

Excellent video! Explanation was complete and easy to understand. Well done!

[@DuctTapeMechanic]

Glad it was helpful!

[@leahforrest9155]

My washer keeps clicking and won't spin or drain. Tub is full of water. I think its the lid lock but not certain. I had a pair of tennis shoes in the wash that caused it to shake washer away from the wall as it was not balanced. Have any suggestions or recommendations?

[@DuctTapeMechanic]

Could be the shaking washer caused the lid lock assembly to break. I have seen that. Is the clicking coming from the top (most likely lid lock) or from the bottom (actuator or clutch assembly)?

[@leahforrest9155]

@@DuctTapeMechanic sounded like the top. I unhooked the lid lock. Readjusted stuff in the washer. It wouldn't work all night but the next day I put it on another setting and now it works. Not sure what I did but it works. Thanks for getting back to me!

[@wmmercenary2810]

@@leahforrest9155do you remember what setting it was lol 😢

[@craigsmith8217]

Could not have done it without your video! Thanks.

[@DuctTapeMechanic]

You are welcome!

[@Magskneff]

I have the same washer. It won’t turn on at all and the lid is stuck in lock. Can you help me?

[@kcmills8385]

I replaced lock switch but still won’t lock . What control power from board to lock switch ?

[@VinceBadovinatz88]

That's what I'm worried about if I buy this part what happens if it doesn't fix it then I'm another 45 or $50 down the drain I just spent $100 on this machine used I'll never get my money back it didn't work I should have tested it on-site

[@timothystevens1018]

What would happen if I just unhooked the lid lock completely would the washer work then?

[@That_puertorican]

Ok so my issue is my washer on spin the lid locks but when on washer won’t wash the agitator spins put the lid will not lock. I replaced shifter, lid lock, I’m lost any idea what it could be?

[@tcwaterdrill]

I am on my 3rd lid lock and my second set of tub shocks on this style GE washer. It was sold to us because we were looking for a washer with a large tub new. The next time it stops working I will take the tractor front end loader and crush it before setting along our mail box to be picked up as junk. This will stop it being picked up and resold to someone else, saving them the problem we have had with it. My first washer and dryer I bought in 1981 lasted 36 years but the washer weighted about 3 time as much as this one.

[@asakayosapro]

you could just part it out at the very least, save others a few bucks out of parts, or recoup the money spent

[@kyleminner4664]

Thank you! I have used several of your videos, informative and easy to understand.

[@DuctTapeMechanic]

You're very welcome! That's awesome to hear!

[@andrewjenkins5580]

My washing machine is making loud noise. I follow directions and changing the rear and the I don’t remember what it was that I change underneath of the transmission but it’s still making the noise. There was no debris underneath of it. Wanted to know what’s the next step that I need to stop it from making so much noise Sound like it’s coming from the transmission valve noise

[@DuctTapeMechanic]

I would look at the clutch/actuator assembly all parts combined are like $80

[@ivanchicken2909]

Need some help, if you can. Have one year old washer like this. In a cottage that gets winterized, so it has about 3 months of use. Put in first load, it filled completely, and then did nothing for quite awhile, then drained out. Now it wont even fill. Just sits and makes a chittering sound (like it's sensing?)before shutting back off. Have done the diagnostic mode, door lock has passed the continuity test (though sometimes gets hung-up on release), blew out pressure line, stuck drill bit into lower air hose nipple. Belt is fine, both motor and basin spin freely. Could the lid lock be the whole problem, even though it does lock? Frustrated and at a loss. Thank you so much.

[@DuctTapeMechanic]

I was going to suggest cleaning out the port for the pressure hose but you already did. That is often times the culprit so good job. I think at this point the lid lock would be a good bet. Best of luck

[@kathleensunderland9549]

So we got the new latch lock that was specified for the model of my GE washer and it did not work nor did it match the parts specified on the QR code on the washer itself. Sent that part back, ordered another and after installation, it finally allowed the washer to fill, and then it stops as the lid lock is still not working. Help!

[@ashleybrown6509]

I have ge washer it stopped during spin and I thought maybe hose was clogged drained water then tried to start it it won't start now. I have tried plugging in and resetting it. Do you think it's the lid lock? It has clicking noise it locks but won't start cycle

[@DuctTapeMechanic]

The lid locks are notorious one these. It is definitely worth trying to replace it.

[@emilyflores8325]

Hey that’s what is happening to mine. Did you end up fixing ?

[@emilyflores8325]

Was it the lock?

[@JuanGonzalez-kf4wb]

I’m reading about 90ohms when the lid is closed. But when I open it, it briefly goes to OL, then reads about 112ohms?

[@dcb3430]

My lid lock started acting up (turning on and off for at beginning of cycle), then washer would not start. I removed it, one prong looked corroded. I sanded it and scraped it with needle nose pliers. I put it back and now it works

[@DuctTapeMechanic]

Great work!

[@allwedontsaytv]

Thank you for this comment! I did the same and was able to fix it without buying a part. I really appreciate it!

[@stevepope5484]

Mines the older one. Less knobs. I got a sec.new lid sw. Broke the first sw/forcing the lid back open? What my procedure?

[@aarongrainger2545]

Can it still be a bad lid lock if it fills with water then stops and does nothing after that?

[@nicolephillips2662]

My ge gtw465asn3ww threw a belt during cycle. I changed lid switch and replaced belt, machine has power but will not start. Any suggestions?

[@markt5643]

i have one of these washers that it just broke the lid lock. i wonder if theres a way you can just bypass it. i only saw 3 wires going to it

[@DuctTapeMechanic]

Do not try to bypass the lid switch it will most likely burn your control board. Unlike the old school washers, these are not just switches but also have a solenoid which locks the lid.

[@brandontheentrepreneur3606]

I just.bought a lid lock and the washer started working but now I can’t get it to unlock. I tried resetting and no luck. Any suggestions?

[@dakotah801]

I have 50 v coming from my circuit board to lid lock. Both from the board and from the harness. Any recommendations? Could something else be drawing excess power or should I just replace the circuit board?

[@rafaelescobedo7577]

Hi my washer is not doing the spin and not draining the water but it does fill with water and watches the clothes you think is the lid lock?

[@DuctTapeMechanic]

If it is a model similar to this one then I think it is not the lid lock other wise it probably would not wash at all. Without actually being there, I would say there is an issue with the mode shifter.

[@jlharris1968]

I replaced that part, and reconnected everything but the lid lock light is still on. The lid is up but nothing different happens now. I've unplugged it and still nothing.

[@Imheem90]

What is the cause if you replace it and it clicks or doesn’t open whenever the cycle finishes?

[@brendadavies9539]

Hi! Thanks so much for your video! I hope to do this repair as soon as I get the part. Can you please tell me what the tool is called to unscrew the bolts and the size I need? Thanks so much!

[@DuctTapeMechanic]

It is called a nut driver. If you go to Harbor Freight and get the SAE nut driver set should be around $10 you will be golden to handle almost any appliance repair. Best of luck!

[@zainlarson635]

Great video. VERY easy to follow!

[@DuctTapeMechanic]

Glad it was helpful!

[@davidsyked9420]

If the wash shuts down while washing a load of clothes and the lid will not unlock could that be locking switch,

[@Foreverfreedom-jl5ji]

Can you just disconnect and not have the lid lock at all?

[@qmnnvrdyz8965]

I have a question, although I see this is three mths old, I'm hoping you can help, before I take the top off completely. I can see the screws holding the top down, but there are also smaller screws, holding wires down. I'm hoping the screws holding the wire ends down aren't holding the top down, as well, and maybe they're very short? Looks like I have the same washer. If you can help me, I'd sure appreciate it!!

[@DuctTapeMechanic]

The screws holding the wire do not hold the top, you don't need to worry about them. Good luck with your repair.

[@michaelstephens126]

Can we cross connect the wires so latch doesn't lock but washer always works

[@DuctTapeMechanic]

No. You will damage the board

[@michaelstephens126]

@@DuctTapeMechanic I was afraid of that. Can you update the link for the latch? I couldn't get it to work.

[@megonelson5575]

I replacement my lid switch on my whirlpool washing machine but it still having a f7e5 error code how to fix

[@judyjenkins6931]

My GE Profile washer says Lid and it will not do anything. It wasn't off balance. I had just washed a load. Do you think I need to replace the Lid thing?

[@DuctTapeMechanic]

Most likely it does seem like an issue with the lid lock

[@Connie777]

@DuctTapeMechanic my Kenmore series 200 won't start. I unplugged it and tried to start it. It clicked a couple of times then it goes to lid lock. Is this the same issue? How can I fix it?

[@robertstringer1431]

My washer will not start at all, but the lights will light up and the lid lock will click a couple times then stop. Then you hear the sound indicating a wash cycle is finished. All this but the machine will not start a cycle. Does this sound like a bad lid lock or something else?

[@hannahwagner2615]

Did you figure it out? Mine is doing this exactly now.

[@NotJustAnotherCody]

Mine just drains plug it in it just drains I can't put in diagnose mode and it will stop ,then acts like it's working but won't spin or drain after that 😂. I've changed the pump the door lock and the motor because it sounded bad . Searching to find help 😢

[@the-pezinator]

Ok so how would I wire it so I never have to have a lock again?

[@lastlife4077]

Can you post another link to this part? The link currently attached no longer works.

[@savage7992]

I have the same washer and it’s fills but won’t cycle, then it starts to make a clicking sounds on the top right corner! Is it the lid lock?

[@DuctTapeMechanic]

Sure sounds like it!

[@savage7992]

@@DuctTapeMechanic ok thank you

[@tashaj2595]

I ordered that part and the plug fit but it will not sit in that part that holds the switch it’s too big on one end

[@kananiakui-ramos4779]

the amazon link is broken, but this one comes with a black cord LID LOCK & HARNESS WH08X32657 what would I do with the cord?

[@DuctTapeMechanic]

Here u go a new link for the lid lock mechanism. www.amazon.com/WH01X27954-Replacement-290D1580P004-290D1580P001-290D1580P002/dp/B0CGV9VPVY/ref=asc_df_B0CGV9VPVY/?tag=hyprod-20&linkCode=df0&hvadid=675668942552&hvpos=&hvnetw=g&hvrand=13377694247124940523&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9032521&hvtargid=pla-2245443581439&psc=1&mcid=e57419387bfc3558972f4caa776469ff

[@VinceBadovinatz88]

Thanks for the video it was helpful do you think I could bypass a couple of wires with a jumper cable. So I could work the machine with the door open sometimes. Also I wouldn't have to buy the stupid door switch

[@VinceBadovinatz88]

I bought the machine used I like the old-fashioned ones that I can open the lid with and do some hand washing. My old one finally broke and I bought this I didn't even know they were like this. Do you think I can jump 2 of those wires and get it to work

[@DuctTapeMechanic]

Do not jump the wires on this machine. Unlike the old machines this is not just a lid switch it is also a lid lock, therefore you can damage the control board by trying to jump it

[@VinceBadovinatz88]

​@@DuctTapeMechanicthank you darn it

[@asakayosapro]

opening the lid lock assembly might be an option, but i havent tried that yet. But then again, 'not user serviceable' on any of this overpriced e-waste trash has not stopped me, and im not about to get started.

[@codysimpson29]

Is there a way you can just bypass the switch all together by cutting wires or something?

[@DuctTapeMechanic]

No bypassing the lid switch on this one because it is a lid switch and a lid lock

[@codysimpson29]

@DuctTapeMechanic thanks for the reply. It just blows my mind that they make these lid locks mandatory on all new washers. I just don't see the need for a lid lock on a top load washer.

[@jaycole3768]

I have one but it goes off when I push the start button. It only works on the bulky load cycle. What can be wrong with it.

[@cynthianessmith2128]

Hi, I was hoping this would tell me why my agitator and basket don't work independently. I purchased my GE GTW335ASN2WW about 15 months ago and the agitator and drum have always been like one unit. I thought that was normal (and very annoying) but someone told me they should work independently. Any thoughts on why and how to fix that? I have googled the question in many different ways but cannot find any answer. Thank you in advance.

[@lisalancework7999]

I am so thankful I found this I do have an engineering degree so I’m familiar with electrical equipment and electronica equipment however I don’t know anything about washing machines and so I saw this relay needed to be replaced and I also am retired so I didn’t wanna have to drag my washing machine out and take the top off and wouldn’t be able to get to it so I was able and I don’t have small hands to squeeze my hand in there remove the clip that goes to the relay and do that all without removing and taking the top off and so far it’s going through a cycle just fine so fingers crossed

[@DuctTapeMechanic]

Best of luck!

[@lisalancework7999]

@@DuctTapeMechanic It worked for two loads and now it’s messed up again that is probably the control board like the sounds just make even when nothing is running it just makes the little noises like when it’s starting Now it will wash, which wouldn’t do before it wouldn’t even come on before now or wash but it won’t spin and drain I’ve checked all the drain exits that sort of thing it’s not that actually it does drain when it sits there overnight but it just won’t start spinning it’s really strange because it worked for 2 loads then rats...

[@lisalancework7999]

@@DuctTapeMechanic hi I wasn’t sure if you would have a quick suggestion I replace the lid lock switch the relay and it worked for two water loads and now it will wash but it won’t spin it’s just continually you can hear the relay click in and out when it’s trying to spin and it does that several times and then it just shuts off I’ve been looking at your other videos trying to see if you got an answer could you point me in the right direction possibly

[@solarmana]

Hi. Thanks for the video. I have the same machine with the same problem. I tried to order the part from amazon with your link. The link you posted does not work

[@Uneasy80]

Amazing something so simple,great video thanks for making it

[@DuctTapeMechanic]

Glad you liked it!

[@Jbsalazar72]

Can I bypass the lock

[@DuctTapeMechanic]

Not on this model

[@wdsdmdiii]

Thank you!! My switch did not fit well and had to sand the edges but otherwise your video helped a lot

[@DuctTapeMechanic]

Awesome! Great job on the repair!

[@davidlamb8767]

I have the same washer. It will fill but nothing else. After a few minutes it drains on its own. Is the lid lock most likely the issue?

[@itskartercollens1252]

im having the same issue. was it the lid lock

[@ivanchicken2909]

Hi. Did you have success with lid lock replacement? Thank you

[@danfranchini6862]

I have the same issue and just replaced the lid lock if I put it on drain ans spin it locks and runs fine but on any other cycle it will fill and then drain do you think the new part I got may be faulty? Or another issue?

[@niksnotions4190]

So is this testing the wire harness or the lid lock? Bc I know my lid lock is bad but I can't figure out if I need to get a new wire harness too?

[@asakayosapro]

Just get a multimeter and check for continuity on all wires (for the connector-based ones) on newer models, they made the damned lid switch a straight pigtail with no disconnect except for the control board connection, so any testing will just be straight up both the lid lock and the harness - same deal with replacement.

[@jsp3926]

Worked for me! Great step by step directions. Many thanks

[@DuctTapeMechanic]

Awesome! Glad to help!

[@jessicadunsheath9744]

Hi, I am trying to fix my washer. Which tool did you use to take out the screw on the interior once you took off the back panel?

[@gugulaloca]

You can get it at home.depo

[@kc-a7907]

Amazon link can’t find page. 😵

[@DuctTapeMechanic]

The link got corrupted. I put a pop-up link in the video! If you rewatch it. You will see it at the bottom of the video. Just click on it and it will take you there.

[@DuctTapeMechanic]

Amazon link got corrupted. I put a pop-up link in the video. If you rewatch it, the link will show up at the bottom of the screen.

[@jamescathers5807]

My want start are the lights want come on and it makes a loud noise can u help me thanks

[@DuctTapeMechanic]

Loud noise during the spin cycle?

[@amrozy213]

my GTW330ASK4WW is not filling up and won't successfully spin to drain out the water. i've reset the lid after unplugging it... and it worked for 1 load but now it's not working. the lid is locking though when i put it into spin. would this be an issue with the lid lock mechanism even though it's locking?

[@victorrodriguez7061]

Mine did the same thing 6 months ago, I replaced the water pump underneath the washer simple to do.

[@rachaelmedeiros3179]

Mine is doing the same thing! Did you find out what was wrong with yours?

[@3fan420]

Thank you, it took hours for simple fix

[@DuctTapeMechanic]

Your welcome

[@anthoneywinders7808]

Will you show how to run the service test mods on showing you how to find out the problem and how to set up a new timer

[@MetalSonicReject]

I have a GE GTW330ASK3WW washer, and the locking mechanism is clicking 3-4 times, and won’t start any cycle. I’ve tried leaving unplugged for several minutes. Doesn’t work. I’ve tried doing that again on top of turning the circuit breaker off, and then back on. Doesn’t work. What is happening? It’s causing my family and I to argue against each other.

[@DuctTapeMechanic]

Sounds like a bad locking mechanism

[@joseguerrero6055]

I got the same washing machine, would you happen to have the part number for it thank you in advance

[@DuctTapeMechanic]

Hi. The part is linked in the description

[@jessecasales1247]

I replaced the lid lock. It clicks but the pin won't retract to allow you to open the lid. Any ideas? Thank you?

[@_papad8434]

On my GE model I actually just unscrewed and removed the part that is on the lid. Then I just left it pushed into the assembly so the machine 'thought' the lid was locked when it really wasn't. Not all brands/models have the top thing that can be removed though.

[@hummushighness4123]

Where is the link!!??

[@chazbennett7771]

Thank you sir, your video has been very helpful

[@jdwilmoth]

Is the lid supposed to lock before it fills up?

[@keithalexander36]

Warning that capacitor might have some jolt even if unplugged.

[@tylerreyna6992]

Scared me the way he grabbed it. They can hold enough charge to kill even when not powered

[@elainebittencourt8976]

Oh don’t say that! Now I am afraid to do it myself!!

[@ericwyman-cp5ke]

Love you videos. Can i jump the red and yellow wire at the switch end to trick the machine? Its full of water so id like to have it pump out. Thanks!!

[@DuctTapeMechanic]

Do not jump the wires. It will ruin your control board. The best thing to do is just take the cloth out and get a replacement lid lock.

[@asakayosapro]

You can enter service mode and find the option to 'test run' the drain pump. Look up the codes to your machine before entering service mode, preferably by finding the paper manual the washer came with, stored somewhere inside the chassis.

[@jf550]

There is no way to wire around this?

[@DuctTapeMechanic]

Nope

[@mrs_beardmode]

Can you make it work without replacing the lock & disconnecting both sides of the wires?

[@ephenj]

This is what I want to know it's just three wires going in which completes the circuit what do you have to do to just have it know it's locked and closed bypass this entire thing made of junk and poorly injected molded plastic. I did a load of laundry and it clicks open and the little piece of plastic comes flying out now won't run cuz the circuit won't close. Mine doesn't even have the plug it goes right into the lock mechanism. Tell you I would take a washer that's 30 yrs old over any new one all junk.

[@johnnowak9548]

Great question!

[@anthoneywinders7808]

Will you make a video on showing how to run the service mod and how to install a new timer please

[@Adam-ty9zj]

Can you please provide the original GE OEM part number in the video description as you stated in the video? Looking at the provided amazon link, it appears this is replace 1 of 3 potential parts. Thank you! Video looks most helpful and I'm hoping this fixes my problem. My wash actually starts and puts some water in the machine. The locking mechanism actually actives, but the lid lock lock light never turns on. Then it just times out. Do you think it's the same problem even though the top does lock? Thanks again.

[@hatakz56]

Did you ever figure this out ?

[@SamuelPerezMolina-c6m]

Clicked link for lid lock but it doesn’t work

[@rachellechavez3319]

My man just watched this video for 1 min and took 15 seconds to pop out the lid lock without taking the whole top off. A ton of extra steps in this video. Lid lock had tabs underneath and pops right out.

[@ironrion]

Can you just remove the lid lock entirely?

[@DuctTapeMechanic]

Nope that won't work

[@stevepope5484]

New lid lock for 6 year old while pool. Striker won't come back out of the switch unless I press the tiny white button with a pin. Both on the machine and out.

[@sofiaolguin4979]

The link isn’t working !

[@qmnnvrdyz8965]

Just replaced my lid lock, which has been janky from day one, and it's still messed up! It decided to stay on lock, right at the finish line! I'm at my wit's end, with this rotten machine, and it's only 3 yrs old!! I miss the old ones, before all this electronic nonsense!

[@aneicer4705]

SAME here... its been a piece of junk from DAY ONE and I'm furious!!!!!!!

[@qmnnvrdyz8965]

@Peter I replaced the lid lock and the pump. However, the lid lock still wasn't aligned properly, so I still had an issue...lol! I ended up taking the lid lock off and putting it in its receptacle (can't think of the exact word), and now it works! I don't close the lid, because I don't want the lock moving around, but I don't have little ones to worry about. Sometimes I have to take the lock out and put it back in, but it works. Man, if that contact btwn the lid lock and its receptacle aren't perfect, it won't work!

[@qmnnvrdyz8965]

@@aneicer4705 Every appliance you buy these days is absolute garbage, and it costs a fortune!

[@brianseeney1364]

I replaced the broken lid switch for a friend and it will not go into spin on the drain and spin. It drains the water then shuts off.

[@lovelysammy1]

Thanks much I love this video ❤❤❤❤

[@DuctTapeMechanic]

Your welcome!

[@lbabyy3137]

How can I get ahold of you to ask you a quick question about this??

[@William0722]

You can change it without taking the lid off. I do it all the time.

[@DuctTapeMechanic]

Yes I know the way you are speaking of. I always scratch up my arm when doing it that way, so I wanted to provide another perspective.

[@BringItOn31124]

This video would be 2 minutes actual running time if done the quick way.