Slowly working my way through all the issues with the rescued hitachi uh043
Пікірлер: 407
@townsville692 жыл бұрын
Amazing how satisfying seeing a smooth running, greased bearing can be.
@davida.p.99112 жыл бұрын
A greased bearing is a happy bearing😊
@damnoldguy2 жыл бұрын
I started watching your channel while you were getting this running and out of the jungle, can't believe it's been 2 years.
@Kaylas_Customs2 жыл бұрын
Mee Too !! , :)
@donmiller42602 жыл бұрын
It's hard to think it been 2 years already
@wyattbottorff24732 жыл бұрын
Same. It's been a hell of a 2 years!
@andrewlewis34862 жыл бұрын
Thanks for responding to my question. I so enjoy viewing all your posts. Most posts are more than 4 months old. I've only been viewing for about two weeks. Self taught is better than classroom education. My opinion. Take care, from Cincinnati, Ohio.
@glenpaul36062 жыл бұрын
If you need to clean corrosion or rust from polished parts, try bronze wool. It will not scratch steel or chrome etc. Learned about using it on the chromed parts of a motorcycle I restored a few years ago. Found it to work equally well as steel wool but without the risk of scratching or dulling parts.
@marcellino19562 жыл бұрын
you know i'm always learning something every time i watch you work
@kirk4672 жыл бұрын
Good to see the hitachi again, you’ve done such a great job bringing her back to life! 👌🏻👍🏻👍🏻
@mistahbenn2 жыл бұрын
always a pleasure hangin with Marty
@BigDib182 жыл бұрын
Love this tractor. That’s how I found yours channel!
@Failociraptor2 жыл бұрын
Me too! The one that started it all
@adamvowless30782 жыл бұрын
Isn't it an excavator? I could be wrong but I believe a tractor has rubber tires... Please correct me
@jacobstephens84472 жыл бұрын
Same here lol. That series took this channel off I think
@BigDib182 жыл бұрын
@@adamvowless3078 you’re right, it is called an excavator.
@davidchang-yen12562 жыл бұрын
Love that all your old machines run like clockwork, making just the right noises. Warms the heart.
@FixedByDuncan2 жыл бұрын
Ingenious as always, love the old school way you fix things. Can't stand the way we've gone to a throw away society, this is how it should be done. Nice job Marty.
@assassinlexx19932 жыл бұрын
All for a price of a zerk and time. Aussie engineering at its finest
@chrismoore21782 жыл бұрын
@@assassinlexx1993 Kiwi mate. It's a fine distinction but one worth making.
@assassinlexx19932 жыл бұрын
@@chrismoore2178 Woo sorry about that. At least I didn't think you were a tassie.😆🇳🇿👍
@cstew83552 жыл бұрын
Very well done! I've just applied for a HGV technician apprentice job thanks to watching your videos mate! I have been short listed as a trainee with a big GAS production company!! As a fleet HGV technician 😄👍.. Just have to pass the interview now.. Love your work you inspire people to be better 👍
@Locane2562 жыл бұрын
I love seeing stuff fixed and the before and after!
@jarmstrong28432 жыл бұрын
It might be a good idea to weld a protective 1” ring around the zerk fitting to give some protection against being damaged by rocks, etc. Just offering an idea.
@Monkeysic2 жыл бұрын
I weld a large 7/8" nut or 1" nut over them give them some protection!
@haydona18452 жыл бұрын
@@Monkeysic Fantastic idea dude. Imma do that on my machines
@Mad.Man.Marine2 жыл бұрын
On those it’s kinda hard since they are usually cast. Couple times I’ve had to do a job just like that I used a secondary 1/4” plate with a piece of pipe welded to it. That goes on over the cast plate and the grease zirc. Kinda like a big washer. Also means it’s removable to be installed on the next roller. I also never leave them as oil bathed. Always adding grease zircs to top rollers and the like.
@jarmstrong28432 жыл бұрын
@@Mad.Man.Marine If cast metal, then braze on a protective ring.
@Flowing232 жыл бұрын
It’s great to see you working on the old excavator. Can’t believe you resurrected it from lying abandoned in the forest what a great find. Good luck to you.
@louisroman71342 жыл бұрын
Great job Marty,see you on the next one,thanks for sharing.
@Kitchevo2 жыл бұрын
Yay back to the farm!!!! BIG MACHINERY!!! Loving seeing the hitatchi again! Praying for more grader and tractor action!
@ottoneidlinger49382 жыл бұрын
I’m so glad I found this channel. It’s just great to watch you work so calmly. Never cussing or getting angry at something. Very methodical in his work. Thank you for taking the time to record these videos.
@RaspyOB1742 жыл бұрын
I could've done an hour long video on this one. I love watching the fixing and the maintenance videos. You're the only channel that I went back and watched every single video. Thanks for taking the time!
@aaronjohn65862 жыл бұрын
Thanks for being an inspiration to work on stuff others would scrap or let rust away. Took on some tires and rims for a trailer, cleaned them up and made it all work. Cheers mate!
@williamdawson33532 жыл бұрын
You make the repairs on equipment look so easy. That is a real skill you have.
@5710Mrjohn Жыл бұрын
Great to watch you fix things you are truly inspirational thanks for making these videos Marty
@KempFamilyHill2 жыл бұрын
Well done Sir. You always make repairs look so easy. It's also good to see you back on the homestead. I guess you and the wife are back to home schooling.
@sixtyfiveford2 жыл бұрын
Great save. Grease fitting was a fantastic idea.
@ThePurpleSquirrel2 жыл бұрын
Some of the stuff you do is sheer genius.
@StewsChannel2 жыл бұрын
The old Hitachi is still one of my favorite rescues! Such a cool machine :)
@playnhrd2 жыл бұрын
One more time I am watching the repair of heavy equipment that I would never have the opportunity to need, and am enjoying it completely. Not sure why, perhaps someone can educate me on why I find this so enjoyable.
@evilkidd1742 жыл бұрын
Seeing that people can still do things with their hands is what is satisfying. It restores ones faith in humanity.
@t.w.32 жыл бұрын
I think it's the feeling of accomplishment. Problem, problem identified, repaired, works just like designed. Somehow this sequence of events trigger something in the male brain. No matter if you have your hands deep into a hydraulic pump daily, or have never seen the inside of a contruction machine cab. :)
@yt4krist0f2 жыл бұрын
Some hints: - localizing the root cause of a problem exactly - cleaning away the dirty work of time and the environment - lubricating hard surfaces working together smoothly - repair something to extend it's life-time with a few, cheap things and some enjoyable work - enjoy the glory of the clear success knowing it will last for a long time And I guess all of these are symbolic acts to other parts of human life as well. We humans are very feedback needed/based creatures. What we see and do is building up our state of mind which is our 1st level of existence. We are happy if we see that the world around us is a good place and/or if we feel that we are capable to make it better.
@Twisty1122892 жыл бұрын
I started watching this type of stuff a while ago and it really helps you wrap your head around more abstract solutions to things. like who would think "oh, just tap a grease fitting on it" that type of problem solving can shift over into all sorts of different areas.
@TimHollingworth2 жыл бұрын
Good question. I think it's an act of human kindness. Gets me every time!
@jakemurphy95362 жыл бұрын
Nice one Marty. Can't beat being able to grease where it's needed. One thing that pained me with some heavy equipment, were the so-called 'sealed for life' track rollers, because their life expectancy was always way less than it was supposed to be. Manual greasing beats them hands down.
@horatioyen2562 жыл бұрын
agreed sealed for life parts suck
@kragfearghal2 жыл бұрын
Mr.T, you are such the handy fellow , been watching your videos for less than a year but you impress me with your skills. Keep up sharing your educational videos sir, greatly appreciated :)
@thomasharrington55112 жыл бұрын
Nice to see people like you still exist. This world has become disposable and it's nice to see that you dedicated your life to learning and preserving.
@glenharper31362 жыл бұрын
I started binge watching your videos on Thanksgiving day yesterday from Oostburg, Wisconsin U.S.A.
@tonydeleo36422 жыл бұрын
I love watching you do so much with such little but ingenuity, outdoors in the weather, quite amazing!!
@michaelmcclure86732 жыл бұрын
Marty I like how you fix things on a budget to keep on working. 😉👍
@eliprince12 жыл бұрын
You have the best handyman channel on KZbin! Thanks for being awesome!
@daddybob60962 жыл бұрын
Well done Mart, a little bit of maintenance goes a long way, pays off in the long term. Bob. Lower Hutt.
@lucasstiles8012 Жыл бұрын
Yanno its pretty cool that I happen across your videos whenever I get an itch for machinery.
@stanwebb34802 жыл бұрын
Great Job Fixing the roller!!! Not to flat... No water running off the bank and puddling up in the building...Have it run down the sides...Just my thought but I can not see all of the space you are working with.... Let us see the build from here to finish... If so much work then in video segments!!! I will be waiting and watching......👀👀👀👀👀📆📆📆📆📆
@MartyT2 жыл бұрын
Yes I will be digging in a drain pipe right around the shed and putting a moisture barrier under the slab to keep the shed dry.
@handyhippie65482 жыл бұрын
they say the squeaky wheel get's the grease, or track roller as it were. it's a good thing too. i don't know about you, but that screech would've driven me bonkers, not to mention i wouldn't want to have replace a track on that thing. sounds like lots of unnecessary hard work, and wasted money for want of bit of preventative maintenance time and a little lubrication. fixing the problem when it starts, rather than when it quits, is what people with more sense than dollars does, and we all know you have an abundance of common sense, unlike the majority of humanity it seems. i get too many jobs that would've been a cheap and easy fix like this was, but instead they just kept using it until it died, then brought it in to me to repair at triple the time and expense. i guess i can't complain too much, it keeps the lights on, and the wolf from my door.
@wiseoldfool2 жыл бұрын
There's a very old saying "A stitch in time saves nine". Can't understand why anybody would give a thumbs down to this.
@rotex3802 жыл бұрын
Great job once again Marty.. love when you do video's about the digger.. keep up the good work thanks for sharing cheers 🍻
@craigsudman45562 жыл бұрын
Every once and a while we get a "gimme", which we gratefully accept. Great video Marty, thumbs up.
@mdwdirect2 жыл бұрын
I really enjoy all of your content. Thank you for sharing!
@davidcarlton24722 жыл бұрын
Good job Marty.. I love to see you diagnose a problem and set it right..
@mrtagret2 жыл бұрын
You have no idea how entertained and happy I am watching your videos. Calming in fact.
@zulhaimiwahidin51962 жыл бұрын
Superb solution Marty
@kirk4672 жыл бұрын
Good job Marty and thanks for sharing brother! Hope to see you soon with another video! 👌🏻👍🏻👍🏻y’all stay safe and healthy my friend! 🙏🏻
@thepunishernzl2 жыл бұрын
Looks like you’ve polished a few shafts in your day.
@danne77sthlm2 жыл бұрын
Every good person in the world, likes when a good old machine gets well treated, used and fixed up, I have my TEA-20 in the garage still, have to change clutch on it and some seals too, some day I will get to it, should have done it this summer but chopping firewood came between and a lot of other things around here that needed be done instead
@JOSUE-4162 жыл бұрын
friend, paint it to make it look like new, you put glass, repair the ladle so that it does not have so much game, greetings from ECUADOR 🇪🇨
@markhensley93782 жыл бұрын
All of your machines are working perfectly. You've got some great mechanical skills! Enjoy the rest of your week.
@annechristiansen9418 ай бұрын
Marty er ikke dum. Tusen takk for god underholdning.👍🤗👍🇸🇯
@tonymckeage10282 жыл бұрын
Great Video, Love your work, thanks for sharing
@jackdehaan22672 жыл бұрын
Love these practical fixes.
@robertlemoine35002 жыл бұрын
As usual ,another fine job sir,how about some scenic shots of beautiful NewZealand.Cheers mate
@andrewradford39532 жыл бұрын
Nothing like showing the Japanese girlfriend a little love. I've got a later model, along with an English mistress around the same era as you tractor - unstoppable.
@Mangsaab19542 жыл бұрын
HITACHSHE , not Hitachim.
@chrisspencer65022 жыл бұрын
The last thing any one was expecting when a friend said you have to see his asian misses
@chrisspencer65022 жыл бұрын
You always have to show a lady some love before a strait forward erection
@alcopower57102 жыл бұрын
What English do you have?
@NZDIRT2 жыл бұрын
Most would’ve pushed this out to just over 10 mins to maximise ad revenue but not old Marty T
@Rudy972 жыл бұрын
I think it's 8 minutes now not 10
@Zetrisy2 жыл бұрын
I wouldn't even be mad, he makes the best content & deserves a buck 👍🏻 thanks again Marty
@RaspyOB1742 жыл бұрын
I was actually disappointed that it wasn't a longer video. I could've totally done an hour video on the excavator
@BobSmith-iu3hx2 жыл бұрын
@@RaspyOB174 Yes, I wish Marty T would make his videos longer, preferably a lot longer.
@skidmarkscar90822 жыл бұрын
Yeah , kiwis don’t usually do B/S, straight t the point, facts only,
@tony66au2 жыл бұрын
Suburbia getting to you Marty? When the sun starts shining and spring is in the air its time to go bush every weekend lol
@mischef182 жыл бұрын
Excellent video and fix bro. Safe travels down your way
@claytonplummer95092 жыл бұрын
I like the German specs on the bolt tightness "good-n-tight"!
@NigelMarston2 жыл бұрын
With the amount of grease you pump through your vehicles, you must have forearms like Popeye. In your situation, I would probably have one of those battery grease guns by now. Another excellent video. You live a life I could only wish for. I love fixing old things but my fixes are "tons" lighter than yours.
@flat-earther4 күн бұрын
hi nigelmarston, have you become a flat earther yet? If not I suggest watching _Level with Me (2023)_ by Hibbeler Productions to see evidence that space agencies are lying.
@chrisallen22762 жыл бұрын
So nice to see some vids again Marty I really enjoy your content
@jdmccorful2 жыл бұрын
Good work on the fly! Enjoyed watching.
@rickoliver20592 жыл бұрын
Just like that , another little job done and dusted before it became a bigger problem . I`m exactly like that , any problem , I get onto it straight away , otherwise it might get forgotten about and fail at precisely the wrong time , usually costing megabucks to rectify . Cheers Marty .
@davidsnyder2000 Жыл бұрын
Very clever fix. Thanks for a way to know how ton fix that problem 👍🙂
@abdulmuthalib80362 жыл бұрын
as an engineer, your channel is my inspiration. good job mate.
@tihspidtherekciltilc54692 жыл бұрын
That's the machine that brought me here and I'm glad it did.
@remog382 жыл бұрын
brilliant as usual ,if you have the time i am sure we would love to see the shed go up .
@brucemitch9282 жыл бұрын
Perfect repair for your machine mate, She’s not hard pressed workin in bogs and the like, do nicely 👍
@seafieldgrant69572 жыл бұрын
Marty you make it look so easy ! thanks for the video !
@localcrew2 жыл бұрын
Next time you have the welder out, take a 1/2” pipe nipple 1 1/2” long and cut it in half. Weld each piece to the roller cover around the grease fitting. Now put a pipe cap on there. You’ll keep rocks and debris from dinging up your grease fitting and making it unusable AND your grease zerk will always be as clean as new. 🤙
@BadradioWOT2 жыл бұрын
Hey Marty, love the video where you get this excavator out of the woods, very nice.
@blazetieftw2 жыл бұрын
It's crazy how many construction/excavation companies will abandon expensive machinery like this.
@JohnSmith-pl2bk2 жыл бұрын
Most of these vehicles are owned by the efarmer and depreciation is claimed as a tax refund each year. So after a few years the machines are basically worthless 'on the books" So the farmer buys a new one...and just lets the old one sit "just in case".
@kevdel2 жыл бұрын
This Hitachi is better cared for than the one Mrs Ave has!!
@kevinsaunby9822 жыл бұрын
Nice to see the three way bush torque settings being used - tight, very tight, b…… tight!
@davebetker87882 жыл бұрын
German torque specs....guut n'tight
@robmosher3622 жыл бұрын
Just what I need early in the morning. A calming voice and an interesting video. More please.
@Stambo592 жыл бұрын
Suggestion, weld a bit of pipe on to that plate around the grease nipple to protect it. Save it from getting knocked off. :-)
@videolabguy2 жыл бұрын
That repair was very... eh, hem.... slick! Can't wait for the shed build.
@yeagerxp2 жыл бұрын
Nicely done 👍👍👍Thanks for sharing
@ruaraidhmcdonald-walker95242 жыл бұрын
Tidy fix! Neatly done. With so many classics now, would it be a good time for a tour of the collection and how everything’s doing? Boats and yachts all good too?
@timovilkki52092 жыл бұрын
Hyviä videoita, kiitos.
@kerrygleeson44092 жыл бұрын
Thanks Marty what a find that machine was 👍
@pettyfogger23052 жыл бұрын
You are a wizard, Marty!
@MrGeroth2 жыл бұрын
Marty your amazing. Thanks for sharing.
@avrel8202 жыл бұрын
Enjoyed watching you as usual :-) most smart Fix using grease might be worth doing the other side when you check on it
@meirionevans51372 жыл бұрын
Good save. "Many a good ship has sunk for a cent's worth of tar"
@nadkram12 жыл бұрын
Always look forward to seeing what you are up to... good channel, Marty. ))
@1toonhead2 жыл бұрын
With the shed I've heard its better to put the shed up first then the slab inside it. That way it makes it more water proof.
@MartyT2 жыл бұрын
Yes I'll be doing that, I'll lay the nib wall, put up the shed then lay the slab
@jpsimon2062 жыл бұрын
It's interesting that over hundreds of years in hundreds of industries, nobody has come up with a replacement for the very necessary pile of dunnage. We have so much high-tech equipment that can achieve what our predecessors could only dream of, but at the end of the day when you have to move something heavy, stacking wood blocks is still the same operation that the Egyptians probably used.
@dfross872 жыл бұрын
I'm sure there's a special tool for a lot of these jobs, but a specialist track lifting doodad isn't nearly as adaptable as a length of 4x2.
@lawrenceengel33302 жыл бұрын
Nice inexpensive fix to keep things moving and working 👌
@TedBishop12 жыл бұрын
" a wee way to go yet " I love the expressions Good advice fix it before it breaks take care Marty
@metalman0652 жыл бұрын
Now just to work on the slop in the bucket pins, I seen quite a bit of swinging motion when you were moving it around. Nice to hear a quiet track when moving around..
@kelvincampbell44012 жыл бұрын
Marty T you do a great job on everything you turn your hand to good on you I like watching your videos.
@billsmith51662 жыл бұрын
Wow. That's so quiet now that you could read a book while you're working.
@tellmesomething2go2 жыл бұрын
beautiful job mate!
@hadynmcloughlin46612 жыл бұрын
Great work love your channel mate
@bertrandducouedic86212 жыл бұрын
Wonderful job. Now you can dig the mountain and make a very large and plate ground there...
@deaks252 жыл бұрын
Always nice to see the old Hitachi get some video time.
@carlofthemountain15982 жыл бұрын
adding that grease nipple is such a good idea... i might have to steal that one :)
@leoncaly42902 жыл бұрын
Love a nice quick and easy fix.
@alfadoofus2 жыл бұрын
I think that was the fastest time between videos . I hope this is a trend. good job keeping the hitachi up to snuff
@gregj79162 жыл бұрын
You need to replace that section of broken track too!