FIXING MY 01 EXPLORER THAT WON'T STAY IN PARK

[@daviddilks9613]

Thank you for the video. That was the problem the 2 bolts were loose. It was really harder just to take apart the stuff to see what you had to fix. Then tighten the bolts.

[@TRG972]

After many months of having to start my '03 Explorer Sport in neutral and using the parking brake to prevent the vehicle from rolling while 'parked', I finally decided to dig into this problem and found your video. You sir, saved me a bunch of time. Loose shift bracket bolts were exactly it. It's nice to be able to start in park and feel that parking pawl doing it's job again! Thank you for the video!

[@JunkworksGarage]

glad i could help 👍

[@ChrisWard64658]

I think you might of saved me a lot of money. Thanks.

[@JunkworksGarage]

👍

[@jameswinslow4107]

Tried it on my 2001 Ford Explorer XLS. Your process worked perfectly!

[@JunkworksGarage]

👍

[@jellyfish1333]

Lol I like many others required this exact same fix. Thank you. Usually with repair videos, it’s not exactly the same but you usually end up with enough info to do the fix. This video was spot on I was so happy. Just to put it out there no big deal, I wonder if the creator realizes this video could use some editing. I didn’t see it mentioned in the comments so I wasn’t sure. Anyways it was fine for it’s purpose

[@JunkworksGarage]

👍 i have been going threw my vids slowly re editing them

[@Brad-ip8wz]

Giving it a shot on my 2002 f150 today, it seems this is the consensus on this issue, thanks for taking the time to share

[@JunkworksGarage]

👍

[@carolynway850]

Thank you so much! Tell you what. It's difficult as is, but working with the seat in place makes it 10x harder lol.

[@AnthonyRiveraPDX]

Hey man just wanted to tell u, this happened to me and watching your video was exactly what I needed and what was wrong with mine and I just did it myself. 🙏🏽 Thank u

[@JunkworksGarage]

👍

[@haddieman]

Thanks so much for this video! Literally took me 5 minutes to tighten the bolts and my explorer went into park for the first time in months! Thanks so much!

[@JunkworksGarage]

👍

[@fsback1965]

You are the man! I did search around and didn't find anything much that was really helpful - most were replacing the neutral safety switch or shift interlock solenoid. T was suspecting this type of problem and it was nice to see someone had already dove into it. Nice job & very helpful!!

[@JunkworksGarage]

thanks 👍

[@CC-yr5ji]

Thank you for making this video. I was able to fix my 2000 explorer with it. Saved so much time.

[@JunkworksGarage]

👍

[@chuckcook700]

Just want to say thanks ! You saved me alot of $ . Same make and model. A garage told me it was transmission problem.

[@JunkworksGarage]

Sadly i here that lots there are no good mom & pop mechanic shops anymore, it's all chains were there trained to rip you off and still not fix the problem 👍

[@robertsmith8632]

I fixed this exact issue today. One screw had fallen out. I added Loctite so it wouldn't back out again. Also removed the other screw and added Loctite to that one as well for good measure.

[@tee.tapia380]

Thank you! My Explorer Sport has the same problem!!

[@JunkworksGarage]

👍

[@eriktweedy4299]

Thank you for the video. I have the exact same problem on my '96 Explorer. Will try this over the weekend and see if it fixes my problem.

[@JunkworksGarage]

👍

[@przemysawpietrucha7275]

THX! Fixed! I love my Explorer again!

[@AshleyOwens-rv3tx]

Thank my guy your the best

[@edriver6955]

I still need help. Thank you for the video. I watched it a while ago and went under, tightened the one screw I could ( the other is stripped and different) and it worked for several months. I didn't use the locktight and now it seems my problem is worse. I went under and tightened the same screw and it worked immediately but just 2 days later I began having problems shifting back to park. It seems to start out at reverse. And the screw I thought I tightened fell out. When I tried to put it back in .... Well it's not catching. It seems to be going straight into the outside hole and not into a plate inside that would hold the screw. I don't know how to line these things back up to tighten down. Will I have to get a shop to handle it?

[@JunkworksGarage]

Sounds like its striped out you might need to replace the parts all together as far as going somewhere else that depends on how much you want to do yourself.

[@edriver6955]

@@JunkworksGarage I really appreciate the fast reply. I don't think I want to take the steering column out. Lol

[@philchristians1658]

Thanks for the video. Was able to get in there without panel removal with a T30 torx on my 99 explorer. Got all contorted and just need to do some stretching on my neck now lol.

[@JunkworksGarage]

👍

[@Titan1440p]

Just did this and thankfully u don't have to take the plate off. U can get to the bolts without taking anything apart

[@joseluiscruzlugo6471]

Thank you for the video, one screw fell off. 👍

[@JunkworksGarage]

👍

[@pauloremez2954]

GOD BLESS YOU AND YOUR FAMILY IN THE NAME OF JESUS CHRIST FOR MAKING THIS VIDEO

[@JunkworksGarage]

thanks

[@grimreaper8072]

Definitely going to try this tomorrow I will update everyone on it. I’m hoping this is my issue that I’m having as well. Thanks for the video on it. Update tomorrow if it works for me.

[@JunkworksGarage]

👍

[@grimreaper8072]

@@JunkworksGarage definitely worked Thanks!!

[@JunkworksGarage]

@@grimreaper8072 👍

[@BrianSaunders-dt1rn]

Thanks, too much inf but the end result very helpful

[@PBWillyWonka]

thank you so much!!! i have the same problem....

[@yeahrightmate]

Hi, can you help me here, these are suppose to be a 5 speed trans but they only show a 3 speed on the shifter so how does that work.

[@JunkworksGarage]

D is 3rd & overdrive but i don't think there is a 5th not sure thow

[@yeahrightmate]

@@JunkworksGarage These have a 5R55E trans which is a 5 speed but it only shows 3 speed on the shifter.

[@JunkworksGarage]

i've never worked on one so i don't know why

[@yeahrightmate]

@@JunkworksGarage No worries.

[@TristenJacob-uw7ym]

Does anyone know what size bolt this is my 96 Explorer is missing one of them

[@randalljohnson78]

I'm having the same problem but it cuts off when I put it in drive

[@JunkworksGarage]

it could be your brake switch isnt sensing your foot is on the brake & the safety shutoff will cut the power .

[@lawrencebaldwinjr587]

Whats this part called

[@JunkworksGarage]

i don't know sorry

[@SamofCR]

When you shift it into drive and have bump it down, something else is wrong/worn.

[@JunkworksGarage]

so far it's good

[@williammedlock798]

Honest

[@iandeardorff8292]

Mine is a 1990 Ford Explorer I'm going to try this video tomorrow because all it does it stays in reverse when I try to put it in park wish me luck because nothing's ever easy 😂

[@JunkworksGarage]

👍

[@ddyeo503]

I have an 2003 Explorer XLT at the shop with the drop down adjustable steering column And it has the same problem, no Park! And there is no white cable and no lever with torque bolts. I took the seat out and there is nothing moving at all when you shift the lever through all gears except for Park. So there must be different set ups when you have a drop down steering column. Or 2 years newer a 2003 XLT. If you value your money and if you value your wife driving a vehicle, take my advice and don't buy a Ford Explorer XLT. Anything over 100,000 miles and this will become the biggest money pit you ever experience in your life. This customer has been putting so much money in this Explorer, I feel sorry for him,,,,,,,,,,,,,,

[@ddyeo503]

Ford Explorers nothing but money pits,,,,,,,,,,,,,

[@ericjett8097]

Instead of shoving up real hard on it and breaking something just put it in neutral and start it