Fixing the #1 problem with the MWS

[@CallsignHicks]

Awesome video given me the confidence to give it a go 🤣 Will add to the list of stuff to upgrade 👍🏽

[@collapseguns]

bro thank you so much, I just got my MWS on Sunday and I’m trying to find videos that change out the nozzle piece

[@pingu.0211]

Yeah theres a few out there, but they don't really show where things can go wrong. So I put this together for some folks I know personally and everyone else.

[@collapseguns]

@@pingu.0211 is it easy converting a m4a1 to a URGI or mark 18

[@pingu.0211]

@@collapseguns yep. All you need is a new outer barrel.

[@darkdarkdrk]

Do you not use the other springs in the set, do you only need that one spring? I've also heard from other videos that you should loosen the buffer tube by 1 rotation for proper bolt locking, is this true with your experience using the MWS?

[@patrickcarnahan5493]

I could be wrong, but I am pretty certain the recommendation is to tighten the buffer tube by one full rotation.

[@kevindinh9686]

Hey man, I know this video is old, but your instructions really helped me out with replacing the return spring for my first mws. Appreciate you doing this. I have a question if you don't mind, I ended up scratching up my metal nozzle endpin using pliers (I know, horrible idea but I didn't have a vice block or anyone I knew had one). Would the nozzle endpin from the unicorn set or Dytac be a reliable replacement if I somehow screw it up more?

[@MKAnr1]

The original is just as durable as WE etc are. We are 3 friends who all use MWS original spring has lasted for 3 years now on all of them, while my WE has broken twice

[@pingu.0211]

Definitely can confirm. We only had 1 broken nozzle return spring over 12 MWS's running for about a year each. The we tech's have seen better days (4 of them don't work right or are unreliable)

[@KD-bk7gd]

Mine broke after about a dozen sessions. Womp womp. Thankfully it’s a cheap and easy fix.

[@Obsolete_E]

If there are wear marks on the screw the bolt is overtraveling and hitting the buffer tube. Watch out or you'll break the bolt

[@jackstack6628]

Is it really bad for the gun to use green gas out of the box? Is this something you have to do before you use it with green gas? I just ordered one want to make sure I don’t damage it.

[@pingu.0211]

You can run it for a game or two. But it’s recommended you do some modifications to it to make it 100% reliable. Most mods are cheap or free

[@CamouflageGaming-j7w]

@@pingu.0211what mods?

[@Iangers]

What punch size man for taking off the harder part

[@pingu.0211]

I think I used the 1/16" roll pin punch for this

[@antoniussurya6678]

Hi there. I need some help please to fix my gbbr. I have a TM CQBR Block 1. Now i got an issue on the semi mode firing. It only firing if i turn the selector to auto or safe mode and turn it back to semi. And if i pull the trigger again it wont firing so i have to turn the selector again to auto. Whats the problem with it? Please, i really need ur help. Thank u 🙏🏻

[@peacefirex4089]

need to pull back the charging handle for it to go to safe ❤

[@Zonic0000]

What size of punch is that?

[@HyperLethal0100]

Thanks!

[@Welborngamer]

T…t…that’s my GUN!!!!

[@josemaster1999]

What's that rail on the MWS

[@pingu.0211]

This is just a Madbull rail on this MWS

[@josemaster1999]

@@pingu.0211sweet thank you very much

[@peterbaan9671]

Sadly I found this video AFTER I changed my spring...

[@pingu.0211]

How was it? 😃

[@peterbaan9671]

@@pingu.0211 Well... it was hard, I had to check a lot of videos to figure out stuff. Also, I had to change the hopup nub as well, which was a nightmare, even less videos showing how to do it. I did testfire the gun, but only very close range, so I could barely verify that it somewhat works. The original surgery was yesterday and yt decided to show me your video just today... :D

[@pingu.0211]

@@peterbaan9671 the algorithm knows.... Also, good to know about the Hopup part. I'll look into it and see if its something that people need help on!

[@peterbaan9671]

@@pingu.0211 - What I had problem with doing the nub change is: - Which things are just pressed together and need a good yank and which are the tricky-bendy-breaky parts. - What orientation a new fancy hopup nub should be. - How to assemble in a way that you don't have to disassemble it again... twice. - How to do this all without the special tools, like punches and that barrel whateverizizer everybody seems to have except me. - How to not scratch the whole thing up.

[@peterbaan9671]

@@pingu.0211 +1 My fist problem was actually: Do I REALLY need to take the barrel off of the upper receiver? (Yes, but I needed to research)