My dad's challenger had the dash pop up around the vents so I decided to repair it.
Пікірлер: 48
@Yoyoyojohn3 жыл бұрын
To anyone following this instructional video. I tried this exact adhesive myself and it didn’t work at all. Regular gorilla glue gel with clamps and a ruler to help spread the force worked perfectly. Not bashing the creator of this video, just trying to help everyone out!
@chrissimons67253 жыл бұрын
Has your repair with Gorilla Glue Gel continued to hold the dash in place?
@ten4k9642 жыл бұрын
i user krazy glue. Been holding on for a year now
@tacarlathomas25832 жыл бұрын
I just purchased a 12 r/t challenger manual for my birthday 12/27 I had to have it lol I didn't mind that the dashboard was pucked because I knew I was going to find a fix on KZbin thanks 😊
@tylerandrews552 жыл бұрын
Cool glad it was usefull
@Wrenchingdaily4 жыл бұрын
I used construction adhesive to fix my 2010 charger dash. Worked great
@TheDealRonaldTrump10 ай бұрын
Why does nobody show how to remove the d@mn vent? Mine is in there so tight I can’t even get a good trim tool in there. It’d help if I knew exactly where the clips were.
@MyOmegaBeams3 жыл бұрын
Man I have been searching for this fix forever. THANK YOU SO MUCH! I have a 12 RT and mine started to warp as early as 2015.
@tylerandrews553 жыл бұрын
No problem 👍
@KRTube753 жыл бұрын
I tried contact cement. Applied thin amount to both surfaces, wait 15 minutes then pressed together. Thought it was good until 3 days later and it had lifted again. Took it apart figuring I'd find the contact cement failed sticking to the plastic. NOPE! it failed to stick to the foam. Too slick. This time, I sanded the foam lightly with 120 grit sand paper to give the adhesive something to bite to. Instead of contact cement, I used plastic epoxy since I had it and it works really good on the cracked ABS dash panels. I'm hoping it works. After 30 minutes, I removed the clamps except for 1 as it was stuck solid. Finally got it free and it had a tiny bit of epoxy on it that stuck to the foam and plastic really well. Keeping my fingers crossed.
@candylandrecords927310 ай бұрын
Skip to the end ..”I had to break all of them on this one”🤣🤣🤣
@juliespillane71342 жыл бұрын
Holy smokes, I can’t even handle how much glue is dripping down inside the dash 🤣 Thanks for the video, my Challenger is doing this so I’m glad to know it’s an easy fix! Does anyone know if the dash ever has to be removed (like to have the airbag parts replaced for the recall) if this fix will make that harder to accomplish without messing things up?
@FRANTHESCRAM9 ай бұрын
Need to use wire and drill small holes. Fixed mine with no glue.
@TormentedMiind4 жыл бұрын
What kind of clamp did you use? My Charger has this problem and it’s driving me insane but I’ve asked around and nobody seems to know how to fix it without glueing it to the trim so this is the best video I’ve seen! Thank you!
@tylerandrews554 жыл бұрын
Flat tip vise grips Lowes, Home depot and even small hardware stores have them
@TormentedMiind4 жыл бұрын
Tyler Andrews thanks! Did you set something on top to clamp with it?
@tylerandrews554 жыл бұрын
@@TormentedMiind I used a piece of aluminum angle stock I had laying around most hard ware stores have this stuff
@TormentedMiind4 жыл бұрын
Tyler Andrews thanks so much! Appreciate you and this video!!
@forever392 жыл бұрын
This does not bother me at all in my challenger, it's not a big deal to me, so if someone don't want to see it ...Then get out or buy me another one, at the the end of the day, My baby still look good✌️
@monkeydude39873 жыл бұрын
If only there was a fix like this for the '10-'13 Mazda3s...
@tylerandrews553 жыл бұрын
Should work on any car cant really hurt to try.
@MrBarragan072 жыл бұрын
I actually wanted to see how you removed the vent
@tylerandrews552 жыл бұрын
It pops in all you need is some trim tools and a delicate touch but they still break sadly
@tonymunoz21653 жыл бұрын
Where did you get the dash mat?
@tylerandrews553 жыл бұрын
Cover king
@mi_youtube_novela79864 жыл бұрын
Wow.. same thing happened to my Challenger, is this something common? Try to get it fixed.. don't know where to go
@tylerandrews554 жыл бұрын
Yeah it's common in hot areas, not really that hard to repair.
@marktanzillo53222 жыл бұрын
my 2009 challenger did the some thing
@joepowers7297 Жыл бұрын
What touch screen radio do you have in there? Looking for a good one to put in mine
@cordarin7 Жыл бұрын
That was the factory one...
@adonnaalford41434 жыл бұрын
I need mine done
@XBEASTMODE1X3 ай бұрын
Now I know exactly what I’m not doing lol getting that shi everywhere I wouldn’t recommend whatever you are using try something else.
@danteshammer2 жыл бұрын
This exact problem is happening right now in my challenger. The dealership told me I'd have to replace the whole dash at 3 grand...
@Frxstynah Жыл бұрын
Of course they would recommend the most expensive option right 😢
@Frxstynah Жыл бұрын
Just for it to warp again in 3 yrs instead of fixing the original problem why it curls up in the first place
@adonnaalford41434 жыл бұрын
What kind of glue was that
@tylerandrews554 жыл бұрын
Epoxy I bought at the parts store.
@nice_with_handzthebarber61804 жыл бұрын
What kind of glue
@tylerandrews554 жыл бұрын
Epoxy I bought at the parts store.
@stuartcraig6381 Жыл бұрын
Aftermarket bodyman
@stevehaake66383 жыл бұрын
Is it still holding?
@tylerandrews553 жыл бұрын
Yeah it's still holding my charger is too after a several years
@stuartcraig6381 Жыл бұрын
Yeah right
@stevehaake6638 Жыл бұрын
@@stuartcraig6381 do you have something more to say?
@NoahLowe20102 жыл бұрын
All the prep work and you use a flat head to apply the adhesive 🤦♂️😆
@tylerandrews55 Жыл бұрын
What ever works
@csh78523 жыл бұрын
That jb weld is gonna off gas and stink every time you run your hvac for the next 10 years 😬
@tylerandrews553 жыл бұрын
I fixed my charger this way years ago and not one problem yet, if it starts to bubble I'll fix it again.