I don't want to hear how it makes it "unrealistic" #simracing #racingsimulator #logitechg920 ---------- TOKS | / fantastic_tek GRAM | / fantastic_tek TWEETS | / fantastic_tek TWITCH | / fantastic_ftk
Пікірлер: 851
@PixelKhaos Жыл бұрын
This is the opposite of what most mods want to acheive lmao
@Unaboner Жыл бұрын
No that one guy who put the eraser in it was out of his mind. The brake pedal feels like a normal pedal that hits a brick wall when you press it down half way, you should completely replace that black piece with the eraser if anything
@Shark00n1337 Жыл бұрын
@@Unaboner braking isnt linear. It won’t work or feel properly with no rubber stop. Want to mod it, replace it with a load cell.
@drewdunn3201 Жыл бұрын
@@Unaboner I think you skipped leg day too lol
@heyitskimii Жыл бұрын
@@drewdunn3201 i can get like 80-90% at the cost of my chair rolling back (even with my two amps behind it) so i just want it to be a tad softer so i can still hit optimal brake pressure without rearranging my seat lol
@gamtsfr6224 Жыл бұрын
I wouldn’t want to remove it if it weren’t for my desk and chair, the way I sit and how I have to put the pedals under the desk I don’t have enough room to push it down with enough force
@krispypretzel9277 Жыл бұрын
Fix for sim racers who skip leg day 😉
@gamingbillyo333 Жыл бұрын
Ong 😂
@bakedpotato1744 Жыл бұрын
Nah I wanna be able to hit the brakes without my wheel stand sliding across the floor lol
@krispypretzel9277 Жыл бұрын
@@bakedpotato1744 ahaha, can't argue with that!
@troll666klan6 Жыл бұрын
All I can say is I had to get the true force brake mod with the heaviest spring and I'm skinny like almost look like a tweaker skinny
@gamingbillyo333 Жыл бұрын
@@troll666klan6 lol
@Shinkaaaa Жыл бұрын
When I still had my G29, I just drilled a hole through that rubber thing, so it doesn't feel like an empty pedal. It was way better than just completely removing it.
@Simulacrum0354 Жыл бұрын
Might try this
@youhanhanna248 Жыл бұрын
@@Simulacrum0354did you try it?
@Shazam_youngdaggerD Жыл бұрын
@@Simulacrum0354did you?
@Simulacrum0354 Жыл бұрын
@@Shazam_youngdaggerD I haven’t gotten too it yet, ended up getting focused working on real cars lmfao
@Shazam_youngdaggerD Жыл бұрын
@@Simulacrum0354 that’s even better lmao
@jimtheudb Жыл бұрын
I saw another mod earlier to "fix" the brake pedal but it added extra rubber into the pedal.
@johnnymac6242 Жыл бұрын
Me too, algorithm
@Md915 Жыл бұрын
yeah it cut a piece of rubber to make the pedal more realistic
@user-cs6bg8uh6z9 ай бұрын
That makes it more stiff
@twin9ine-productions8 ай бұрын
its to make it more stiff for the rally racers but if u want it more realistic then when it go all the way down it feels better
@iGPR37 ай бұрын
@@twin9ine-productions you should NEVER do this as it messes with the calibration. it acts as a stopper to stop the pedal going back any further. the thing that measures how much is pressed is calibrated at that point where the rubber stops it. this means if you remove it, you can push the pedal past 100% and wont have any control over it. if you push it halfway, where it will normally stop with the rubber, it’ll be 100% pressure, and pushing it further is still just 100% pressure, as it wasnt designed to go further. i did it and it ruined it, had to put it back as it was so unusable without it.
@gogeardrives Жыл бұрын
What works best is to cut that rubber peace in half and get some small foam mat cut a 1 inch strip and put it on top of that hard rubber. You get a much better feel for realism. Brake gets harder at the right point but still have all the travel needed
@OzzSabbath Жыл бұрын
Thank you so much for this comment. I did exactly what you said, and the pedal is way way better. Your comment needs to be pinned at the top.
@dolbearrr9 ай бұрын
@@OzzSabbathwhat sort of foam mat?
@RoxusRemo8 ай бұрын
What thickness foam? like a 1cm EVA foam yoga mat or thinner?
@SoMiSongbird5 ай бұрын
I thought about that exactly
@james-m-82855 ай бұрын
Make like fanatec, use a folded over piece of stiff foam with the bend facing the actuator face
@lucaprado5447 ай бұрын
This is great because now you can no longer feel the brake lmao What I did was just set deadzones in the sims I play so I dont need to floor the pedal, but still need to put in some effort to brake 100%, the bigger the deadzone the less you need to press on the pedal. I must say, that rubber IS a little too hard tho, maybe drilling a few holes to remove a little bit of mass and allow better deformation is the way to go
@amigobeelgiesqa7 ай бұрын
Exactly
@Missch_17 ай бұрын
I never heard anyone say the bullshit you've just said. This brick is literally the worst thing about G pedals. And that's why Thrustmaster T3PA are better. If you can't feel the brake, just get good, haha.
@lucaprado5447 ай бұрын
@@Missch_1 hey man, no hard feelings but please don't be so toxic, I'm just presenting my opinion and I'm willing to hear opposed sides as long as theres respect. To me, the rubber brick is >somewhat< good, because it tries to simulate hydraulics, irl you dont "feel" the brake by pedal travel, you feel it by the ammount of pressure you apply to it. If you set the deadzones right, it can get pretty decent and you wont have to smash the thing to apply 100% brakes, plus if you drill a few holes into the brick to make it squishier it get much better. After a few months of use the rubber also gets softer by itself. In the video the dude completely removes the rubber, that would make the pedal have no increase of resistance as you brake and I cant imagine that being a upgrade at all, specially for games where precise braking is required, maybe you could replace it with a softer eraser or something similar. Obviously its up to the person, maybe he can brake 100x better without the rubber than I can with the rubber, its a matter of preference and getting used to it. Regardless, it is obviously not a good brake pedal, its a entry-level thing for beginners in sim racing and must be upgraded as soon as possible lol
@shepherdrm84864 ай бұрын
@@lucaprado544Man why even bother with the dude he's just trying to get a raise out of people That said the pedals are absolute garbage if you don't put some work into it and the things you suggest are among the better ones yet I hate the strong opinion a well fitted spring does a better job depending on the resistance it provides it makes you feel the entire range of the pedal And yes I know it has a spring but that one just doesn't cut it
@stevenlarson33167 күн бұрын
I removed mine. If I had it mounted on a rig maybe I'd have a different approach, but slamming on it feels terrible in my current setup. Setting the dead zone was my original solution. I'd either have to set it to slam on it to compress that rubber or tap on it and lock up. There was no middle ground unfortunately. Since it's not a loadcell I think having a lot of travel and just using the compression of the spring to indicate you are getting close is good enough. I contemplated buying a load cell upgrade for it, but it will probably just be better to replace it with a new set of loadcell pedals. This is the first upgrade I will do I think and probably the most needed. Though a direct drive wheel is high on my list as well. It's just very expensive.
@MrKee159 Жыл бұрын
But, wenn you press the paddle without force you don't feel anything right ? The best mod for these paddles are a stronger spring without this little black thing
@Flowermouth Жыл бұрын
Best mod is an actual load cell sensor which doesn’t set you back too much.
@oonfa Жыл бұрын
Best mod is to bin them and get a decent set
@clovermedia. Жыл бұрын
@@oonfa not everyone has the money to just "buy a better one"
@LightningBolt-sf9mt Жыл бұрын
@@oonfayeah you are right let me spend a grand on a racing sim
@nicolaspalaciosdiaz1396 Жыл бұрын
@@oonfa funny, in my country this is like luxury, you have this wheel or nothing...
@flexvolm877 Жыл бұрын
i got this 3 days.... its Not even payed.... lets Take it in parts 👍 thx 4 the Tipp buddy
@NPCLiam Жыл бұрын
Get it get it!
@tbssen36 Жыл бұрын
First day I got my G923 wheel I took it apart to remove the clamps before I even powered it on. In hind sight, I probably should have made sure it worked before voiding any chance of warranty I may of had. Lucky for me, it had no problems. 😅
@zzz_cup Жыл бұрын
saw a guy putting an extra rubber stopper because it wasn't "stiff" enough
@pedrosilvaproductions7 ай бұрын
This isnt stiff at all. If you have this in an actual rig the g29/920 feels like a toy
@Riddle99-v7q7 ай бұрын
Yeah, real race car brakes are stiff
@Grugry.5 ай бұрын
Yours car doesn't have hydraulics?
@lispyy26 Жыл бұрын
Can confirm if you don’t have your pedals mounted this makes a world of difference, also I felt it gave me more range allowing more precise braking
@lordhelmetbro Жыл бұрын
they shouldnt not be mounted lol
@_gr1nchh Жыл бұрын
@@lordhelmetbro The lords of sim racing are so annoying. You guys just all have perfect setups with thousands invested and expect everyone to have that. Some of us just get buy with what we have and what we can afford.
@labatomi10 ай бұрын
@@_gr1nchhthis shit literally happens with any hobby. Always some dumbass gatekeepers.
@BooneLuebchow8 ай бұрын
Not if you drive cars without abs then this makes it so much more difficult because your feet have no reference before locking up. The rubber indicates you’re about to hit that point and the force from there is easier to tell how hard to push vs how far to push
@Theowannamaker7 ай бұрын
@@BooneLuebchowI don’t brake hard to begin with I use just enough
@jrshgligh7833 Жыл бұрын
This is horrible, basically every race car only has a gory small amount of pedal travel plus they usually have lots of resistance to being pushed down
@gamingbillyo333 Жыл бұрын
Someone Who Understands ! Hope On Humanity Restored ..
@gomilopez17 ай бұрын
Same dude, even other "racing drivers" I know personally say it's too hard, bruh like get serious, it isn't hard at all
@Certifier2 ай бұрын
Yeah because when you're braking in a race car you have an extra 3 gs of force you can stomp on the pedal with. In sims you're sitting still.
@Zavodney Жыл бұрын
I will say that the extra resistence is very nice (when you have a stable mount/stand for the wheel) for more accurate braking and more importantly, doing heel-toe downshifting. If it was too easy to press I would not be able to do this
@Mathrss Жыл бұрын
Facts
@gmg8416 Жыл бұрын
As you said, if u have them mounted
@Zavodney Жыл бұрын
@gmg8416 I personally have my setup mounted but I can see how that could be the main issue for people who have their pedals on the ground
@gmg8416 Жыл бұрын
@@Zavodney even with this "fix" it still slides a bit now and then
@JustinCox-br2fc10 ай бұрын
😊😊😊
@Salzmann_69 Жыл бұрын
I did this day one, I couldn't get braking right for shit, just constantly smashing in to walls or locking the wheels, once I put it back it was so much better, you get used to it and as you use it it gets less strong, if its sliding around too much you may want a mount or to remove it but keep it around, you will want it later
@germanchiller177 ай бұрын
its cuz it counts 70% of foot pressing as 100% without the rubber
@Campybella Жыл бұрын
TYSM I DIDNT LNOW THERE WERE SPIKES THIS IS A GAME CHANGER FOR ME
@Vartazian360 Жыл бұрын
How do you not know there are spikes lmao. As soon as I took it out of thr box It spiked my finger 😂
@90147D2 күн бұрын
Just now finding this out 😂😂
@simulationstimulation961 Жыл бұрын
Title correction : How to ruin G920 pedals.
@southernbustransportation Жыл бұрын
I removed the rubber and it works better than when it had the rubber. Still a strong brake pedal
@f.b.i284211 ай бұрын
@@southernbustransportationi say the Same i like it being so soft
@GregoryShtevensh8 ай бұрын
@southernbustransportation yeah but you're not telling anyone about the huge dead zone at the bottom of the pedal either
@BooneLuebchow8 ай бұрын
@@southernbustransportationbut if you run cars with no abs in iracing then that rubber is super useful because it gives resistance around 60% brake which is close to wear you lock up. No rubber means your foot needs to know exactly how far to push the pedal consistently with no feedback
@jstrix_yeet7 ай бұрын
didn't know that having 100% of the brakes instead of 10% is ruining it🤡
@K_Mag Жыл бұрын
You should also change the spring, use the old brake for clutch and old clutch as accelerator, so you'll only need a new brake spring
@Aspirerx Жыл бұрын
This ^. I have em in my current setup and it is wayyy better than the original setup and feels i got more control too
@mamory3791 Жыл бұрын
You saved me from spending money on new springs for all the pedals. Than you.
@letrface_8596 Жыл бұрын
Same
@sevenstars0711 Жыл бұрын
where would one find springs for racing pedals?
@whateveryousayfam5240 Жыл бұрын
CARPET GRIP? CARPET GRIPS?!?!
@kyro09969 ай бұрын
Yea didnt you read the instructions?
@Blue6948 ай бұрын
@@kyro0996 i just have it on concrete there is no carpet small enough to fit under my desk i believe
@kyro09968 ай бұрын
@@Blue694 who has a desk on concrete? I do i have a full motion sim in a unit of mine (Too big and heavy for home)
@Blue6948 ай бұрын
@@kyro0996 marble wrong one that how you can tell im not native english speaker
@CatCantTeach6 ай бұрын
@@kyro0996wdym too big and heavy? You can’t get your sim in your house?
@Driftjp Жыл бұрын
Yeah secret tip go against all realism in the brake pedal awesome.
@himeros8826 Жыл бұрын
The problem with the G29 is that is just to stiff, 0% gradual and doesnt feels like any car that I have tested in real life. Feels more that there is 0 force until you hit 70% of the brake pedal and then its hard af. Is better to replace it with some other rubber that is actually gradual.
@user-cz6ox6zw3x Жыл бұрын
I have an C series AMG and used to own a 3 series BMW, i daily a suburban, none of them have ever felt remotely as stiff as the Logitech pedals.
@harrisonbrand8985 Жыл бұрын
the stock pedal feels nothing like a brake pedal to me, i removed the rubber and boom, much better lap times
@NoHandleSelected. Жыл бұрын
For racing you don't actually want it to move basically at all so you get use to how much pressure to push and start having muscle memory for how much to brake instead of trying to push the pedal down to the same angle all the time.
@aroe7819 Жыл бұрын
that is correct if these were load cell pedals. They are not
@matess36556 ай бұрын
@@aroe7819it is true, the rubber lets YOU focus on pressure instead of angle, doesn't matter if the pedal has a load cell or not
@yodudechase3326 Жыл бұрын
I just got used to the braking force required, real life race cars can have pedals that take up to 300lbs to fully compress, it also helps with trailbraking, but everybody has preferences, and if you have a hardwood floor a stiff brake wouldn't really work out
@henlienr22 Жыл бұрын
i find it better with the rubber, it means you can brake full force at a more consistant rate and if you really need to send it you can attack the brake more aggresively to get that little extra braking, plus that in most pro race cars the brake pedal is that short, youre not supposed to press it that far, not even road cars do that
@TheBaconator2121 Жыл бұрын
Each to their own, but I personally like the rubber stopper. I hated it at first, but after using it for a while I started liking it. I can totally understand this mod for those who don't have a proper sim rig as the pedals will slide on the floor, but with a proper sim rig I find that the stiff stopper makes heel-toeing sooooo much easier to control 👍
@zagadape109 Жыл бұрын
Same here. I got my rubber in back like a week ago. Heeltoe is satisfying as hell now. Only thing is I play on xbox, and I can't see any calibrating options for the pedal range in ac, and acc to do a little tweak down that made driving in pc2 so good for me. Beside that trail braking and ht is just much better and precise with the goddamn thing. Pozdro666
@partytime11 Жыл бұрын
If only the g923 had that problem I took my pedals apart just to find no spring or no block and it’s still stuff as hell
@saud..- Жыл бұрын
Unfortunately you have to get another spring
@ChristopherWoods Жыл бұрын
The 3drap pedal mods are game changing, and if you’re taking the pedals apart, you may as well fit them. My G27 brake pedal feels so good now by comparison and I can brake far more accurately.
@GapeGang Жыл бұрын
Is it really that much better?
@RyanBedecki5 ай бұрын
I left my rubber in, trick is to calibrate it right so that you can get that load cell feel. I have since moved onto a DD with a loadcell but I advise not removing the rubber as you then have a super dead feeling brake. The trick really is to mess with your brake saturation levels and other settings to get the feel right. That rubber when tweaked correctly will give you a decent experience, without it, it is completely dead feeling. Edit: This applies if you have it mounted on a rig or otherwise made it sturdy enough that you can press on it relatively hard, it is meant to be pretty solid feeling so you can actually modulate your brake pressure. People tend to think it is too hard but have no experience with any other pedals.
@jakedyer2230 Жыл бұрын
Anyone who wants to do this it's much easier than this... why it got taken apart that far I have no idea 🤣 pop off the silver pedal an undo the brass screws boom no further disassembly required
@SpcNATlON7 ай бұрын
The complete opposite of what you want to do... true brake makes an excellent mod to mimic a load cell pedal. If you already have the g29 pedals and don't want to shell out 100's, it's a nice middle ground.
@dennisparker505 Жыл бұрын
Feels fine to me stock 🤷♂️
@michaeldob3874 Жыл бұрын
It’s quite realistic but nonetheless I sprained my ankle with it lel
@dennisparker505 Жыл бұрын
@@michaeldob3874 how😳
@Custom2udo8 ай бұрын
@@dennisparker505spaghetti bones
@RODRIGOR300 Жыл бұрын
WARNING: G923's break is very hard BUT there is no rubber, instead, just a very hard spring. I wasted my time trying to do it
@jaderhuff818 ай бұрын
Thanks I’ll leave mine alone
@Magg3438 ай бұрын
Thank you almost wasted my time
@bingbong71697 ай бұрын
It’s not hard, you probably skipped leg day
@TheRealNolanStyles Жыл бұрын
I usually rethread the screws when I remove parts, that way I don’t lose the
@imtoohim Жыл бұрын
The what
@pepomano Жыл бұрын
@@imtoohim The bro
@imtoohim Жыл бұрын
@@pepomano huh
@misiek741110 ай бұрын
@@pepomano lmaoo
@DaBoomDude2 ай бұрын
I got a load cell kit for $150 and replaced the pot and rubber with a load cell... Then i put a new, heavier spring in the brake, moved the OG break spring to the clutch, and the clutch spring to the throttle. Now everything is nicer. The brake pedal is more realistic, the throttle and clutch are nice and weighty too. but the only problem is carpet gripper isnt powerful enough to grip the carpet anymore
@JayPk-pm1ep Жыл бұрын
Always wondered why it was like this, I’m really getting into the sim racing now and I’m trying to tweak everything so it’s perfect
@benthelender Жыл бұрын
I guess it’s like that for realism, real life brakes can be pushed really hard since there is no 100% braking force in real life
@Wiatrak0 Жыл бұрын
@@benthelender Yeah but when i "drove" a car, it wasn't THAT hard to brake. Its easier in a tractor to brake
@sethssimps2733 Жыл бұрын
so dont change it its more realistic but still not even close to the real thing.
@sethssimps2733 Жыл бұрын
@@Wiatrak0 raecars are different my guy
@Wiatrak0 Жыл бұрын
@@sethssimps2733 I know but i don't think it is that hard as it is on the logitech pedals
@pfunkle8 ай бұрын
Instead of physically modifying it, I just calibrated the brake pedal using windows USB game controller settings. When you calibrate the brake, push it in as far as you would comfortably while racing and braking at full force. That makes that level 100% braking force. The pedal still feels good but doesn't require F1 style braking to reach 100% braking. If you are racing in assetto corsa you can also just change the % activation in the settings, but I recommend calibrating using the windows USB game controller settings either way.
@therealovidox8 ай бұрын
Finally someone knows
@mintgoldheart61265 ай бұрын
Also, don't skip leg day. The Logitech pedals really aren't that stiff.
@therealovidox5 ай бұрын
@mintgoldheart6126 it's not really about stiffness even but more about TRUE brake pedal feel and fidelity. You shouldn't need a body builders leg press to achieve 100% brake force but the other 90% is like an egg shell.
@90scottyboy7 ай бұрын
Nah gives that lock up feel
@neonnerd13644 ай бұрын
It feels much better to drill a few small holes in the rubber. It makes it softer but it still retains the feeling of having to actually apply pressure for more brakes. Removing it makes braking way too unpredictable.
@rabmccudden6833 ай бұрын
It’s supposed to be a progressive peddle man. Leave it in there
@JohnMcLon-tt8il2 ай бұрын
It's not really progressive tho it gets rediculously stiff with no progression ~50% into braking
@Imspikebdn2 ай бұрын
Making those into inverted peddles the easiest thing and so worth it
@xX_Gravity_Xx6 ай бұрын
When I was on those pedals I setup the cars to be 100% maximum braking without locking up right where that rubber was. I loved it. That said, my modded T3PM's are much, much bettee.
@jameswolfe61957 ай бұрын
For people who is struggling with the brake pedal maxing out before bottoming out, swap your clutch and brake pedals inside the hole and you should have 100% input on your brake pedal without the rubber
@kennyg19533 ай бұрын
Homie's never driven a real car before lmao.
@hellofreepeopleoftheworld2 ай бұрын
have you? this thing is 4x stiffer then a casual car..
@kennyg19532 ай бұрын
@@hellofreepeopleoftheworld They feel like new brakes which if you're racing they should be.
@hellofreepeopleoftheworld2 ай бұрын
@@kennyg1953 not everyone is gonna be racing, plus a majority of people play on rolling chairs.
@kennyg19532 ай бұрын
@@hellofreepeopleoftheworld The fuck are you doing with a sim rig if you aren't racing? If you boutta say trucking simulator drum brakes are wayyyyyy stiffer than calipers could ever be.
@c0r5e4 ай бұрын
G25 users: Lets put rubber in brake pedal G29/920: Lets remove rubber from the pedals
@calimero14 Жыл бұрын
Genuinely the first thing i did when i got my g920
@ComputerGuyAndy3 ай бұрын
There's a carpet grip?? Another reason to start reading instruction manuals 😂
@CallMeTopes5 ай бұрын
flipping the pedals upside down and mouting them looks waaay more better.
@adilhamzah5096 Жыл бұрын
I think the brake sensitivity should just be adjusted as the travel of the pedal is realistic, its just that when u slam the brakes, it doesn't do the same in the game
@MaxyStorm37 ай бұрын
I normally use the clutch pedal as brake because when i needed to press the brake pedal with full force my chair would go backwards
@furioustester40567 ай бұрын
CARPET GRIP god damn i just refound this
@jaype3317 ай бұрын
I enjoy the brake pedal being hard to completly push
@YaBoiCalamity4 ай бұрын
BRO THERES A CARPET GRIP?!?! that fixes like 90% of my issues with it
@Careless_is300 Жыл бұрын
Nahhhhhh you just need a bigger spring less resistance is worse 😅
@DiabloProcentoPersonal.7 ай бұрын
TimmyTheOtter sounds so down bad in this video 😂 Good video though.
@sourhippo3 ай бұрын
Tell me you haven't driven a track car without telling me
@NPCLiam3 ай бұрын
What gave it away, the $200 plastic wheel clamped to my desk?
@sourhippo3 ай бұрын
@@NPCLiam nah the fact you're modding the brake pedal to feel like a prius
@NPCLiam3 ай бұрын
@@sourhippo ...on my $200 plastic wheel clamped to desk using an office chair that doesn't stay still, yes.
@AverageFemboyIdiot2 ай бұрын
@@NPCLiambut why would you ruin the pedals… they so weak… I’m barely satisfied with my 200kg load cell crp pedals from moza and they are at the max why would you ruin your pedals
@DarmiGames7 ай бұрын
I saw someone add even more rubber, as if it wasn't stiff enough already
@Fr1gg1n6 ай бұрын
Roll up a chunk of mouse pad and put it inside the spring, as it compresses it gets more solid, feels way better then nothing.
@danax-zo2sk Жыл бұрын
Amazing I was playing f1 22 when I tried braking and downshifting I ran straight through a wall 😊
@Blue6948 ай бұрын
so we can confirm this made your pedals better
@michaeldob3874 Жыл бұрын
I sprained my ankle because of that spring lol
@NPCLiam Жыл бұрын
Oh no haha
@davidmorales2767 Жыл бұрын
Is more useful stiff, helps to not lock the wheels specially in a open wheel or old rally car also you control it by force so you can graduate it Edit: it’s preference no mean to call anyone slower if they use it or not, but in my case it helps a lot
@harrisonbrand8985 Жыл бұрын
i personally found it made it way more difficult for me to judge how hard i was braking, once i removed the rubber my lap times improved significantly. i think the mod just helps it feel more like road car brakes that i’m used to
@ivmxthvi52967 ай бұрын
Sorta sounds like that blind surfer dude
@NiCookie258 ай бұрын
That's what I did, now the "brake" is my clutch. Got Asetek Forte for brake and throttle.
@joshy_bennett3 ай бұрын
Best thing would be to find a spring replacement that gets thicker toward the bottom of the coil. I’m not talking spring diameter. I’m talking about metal rod thickness. If the standard is 1.5 mil then have it transition from 1.5 to 2 or 2.5 toward the bottom. Should feel great. Not that difficult to find springs like that either
@sayf_mu Жыл бұрын
Yep, time to lock up the wheels
@therealnorthernchungus35517 ай бұрын
I did this but switched around the springs in each pedal so they felt better
@roger88377 ай бұрын
I replaced that rubber with a piece of rubber from 1 dollar sandals from the dollar store and it feels just right
@Eusimentus10 ай бұрын
Bruh I thought i was TRIPPIN lol so happy I found this..
@RDoLbach11 ай бұрын
WAIT WAIT WAIT, CARPET GRIP WHAT
@rollingon46738 ай бұрын
I didnt even realize the carpet grip switch on mine. Wtf. Years suffering sliding and readjusting
@MrPyro1362 ай бұрын
It's took me all of one race to tear my pedals apart and remove this thing
@callmetav43772 ай бұрын
I like the rubber in myne for more realistic F1 driving
@presidentskroob5226 ай бұрын
It now feels like a realistic brake pedal in a 1984 Lada Riva
@aShadowWizard692 ай бұрын
I would suggest keeping that plastic bit around, it may be required for RMA
@kennedy2718 ай бұрын
Umm… that bump stop represents brake pressure, I’d highly recommend leaving it in and getting comfortable with it. It has saved my ass many times from locking up in real world driving just from the muscle memory of locking up in games. It’s not 100% accurate but it teaches you a great idea on what to do with your braking foot in real life situations
@CockOfTheRock7 ай бұрын
I replaced the spring with a stiffer one when I did this. Wish I would have cut the rubber block shorter instead of removing it entirely. Removing it entirely leaves some deadzone past 100%.
@rdatomica22305 ай бұрын
I put a coin at the bottom of the spring, that helps too
@marktrolic5 ай бұрын
I got my car irl car. Yes. And when i press the pedal, i don't expect it to go all the way to the metal with ease. In fact i don't expect it to go to the metal at all. This mod would work best if it's the clutch. Because it's the same amount of force all the way until you hit the metal which is what you want to do. You NEVER want to hit the metal on the brake pedal because that would mean... you are leaking brake fluid.
@LeviVR_456310 ай бұрын
Thanks bro i did this while i tried inverting the pedals
@ChuchoTheCatLord10 ай бұрын
no issues with the break pedal here because I just adjust the saturation ingame that being said bro just taught me my G29 has a carpet grip.... thanks, gained a sub.
@NPCLiam10 ай бұрын
Aye, welcome haha
@ChuchoTheCatLord10 ай бұрын
@@NPCLiamfunny thing is I actually bumped into one of your shorts when I was dabbling into getting my G29... something about "it's addictive, you're welcome" ... I already got my G29, a shifter and deciding on which Handbrake... will prob go with the Moza HBP.. but ... bills
@louis21016 ай бұрын
Bro that thing is so usefull on race it helps when your driving without abs
@dallasdesroche15977 ай бұрын
2 things, if you take out that rubber you are losing the little bit a realism that them pedals have, and if you tighten screws to much putting the bottom plate back on it can leave your brake pedal always engaged
@formula_frog Жыл бұрын
Thank you, I have a weird rig that breaks in half whenever I brake. This should help
@thelosingwinner1 Жыл бұрын
If you’re drifting I don’t recommend doing this. While you may have the full range of the brake pedal you don’t have the ‘resistance’ that the rubber piece was designed to replicate. I tried both with and without the rubber piece and I prefer to use the pedals with it. Left foot braking is easier to control cos you’ll be able to make micro adjustments
@samualandrade35707 ай бұрын
Tried this and it's worse, it makes it too soft and any proper racer with abs turned off is just gonna constantly lock up after being used to the stiff pedal it came with
@Slix__7 ай бұрын
If I would use my usual force just like my load cell brake, that flimsy thing would shatter.
@stergiostsantzios93629 ай бұрын
After one year I've noticed that the performance drops if I play more than 2 hours. Gears change with lag and the feeling of the car isn't quite good, actual to explain it better
@v1ncecuhzin6667 күн бұрын
btw when i took the rubber out my full braking only registered as 50-60%
@omsh60002 ай бұрын
I’m sorry, but the carpet grip has a clip on it?? This whole time I just assumed that that was how it’s supposed to be. My carpet just wasn’t right so the pedals were slipping. I am so glad I saw this.
@user-st7se8ps6d4 ай бұрын
That rubber can be removed without even disassembling it and it is faster just loosen the piston screw and you are free to modify without opening it from below
@kenshinbattousai3747 ай бұрын
Would be way nicer if you could add another spring to make it heavier.
@supermiaoumix Жыл бұрын
to be honnest, i kinda like the feeling with that rubber thing
@buckrid75396 ай бұрын
I also swapped the brake and clutch pedals, my God it's so much better
@PreDawnSeeker754 ай бұрын
Thanks, I've been using a wheel for a couple months now and just found out there's a carpet grip 👍
@fergar02067 ай бұрын
I used to have the same problem with the pedal being too stiff but actually over time using it it became a lot more pliable and now I would say it's even too soft at the top.
@HUDDY6541 Жыл бұрын
Most people put more rubber in
@_lypacz10 ай бұрын
Not most. Just one lunatic
@henrylynch94377 ай бұрын
Guys, rather than make the pedal so light that you have no braking feel or control. Just put the pedals on a thick yoga mat, honestly works a charm
@ahah694204 ай бұрын
dude could have went into the software and calibrated the full brake to where the rubber stop is
@haydenmidyette89187 ай бұрын
Swap the clutch and gas pedal around mount the pedals upside down and now you have a floating pedal setup
@ashcatchemgames96097 ай бұрын
U don’t gotta take the whole bottom off just take the bolt out of the side of the pedal then wiggle it apart and pull the spring and rubber block out then stick it back together
@kannonfps7 ай бұрын
Me: complain out loud about the break being too stiff imo KZbin: don't worry I gotcha Me: wtf !?
@josealejandroalmada7 Жыл бұрын
Personally I consider it a mistake to remove that rubber from the brake pedal, but I think it also depends on the feeling and comfort of each race driver. Greetings from Argentina 🙋🏻♂️🇦🇷
@BobsUrUncleWasTaken6 ай бұрын
Get the tru brake mod, greatest thing ever. Makes it work/feel like a load cell pedal for like 60 bucks.
@BikeNerdAbel5 ай бұрын
Wow, I've had my g29 for a couple of months and didn't even know it had a carpet grip, how tf did I miss that 😭💀