FIXING THE NERF REGULATOR! Easy, drop-in mod kit tutorial! | Walcom S7

BUY IT: www.nfstrike.c...
This kit is absolute joy. It requires no shell cutting, no soldering (unless you want to use a lipo you gotta solder a connector for your battery), gives you a bunch of new features like ammo counting and speed control, and basically anyone can install this thing. This gives a whole new wealth of options to a blaster many people ignored, and I'm excited to see what people do with it.
MUSIC: GunZ
LIKE & SUBSCRIBE HERE: bit.ly/Sub2Walc...
WATCH MY TOP VIDEOS HERE!: bit.ly/WalcomS7...
FOLLOW ME!
FACEBOOK! - / walcoms7
TWITTER! - / walcoms7
FUZZY WALRUS INDUSTRIES DISCORD! - tinyurl.com/FWI...
Fan Mail Address:
WALCOMS7
1673 S. Market Blvd #10022
Chehalis, WA 98532
About Walcom S7:
Building things that shoot foam darts incredible distances, extremely quickly, in insane quantities.
When it comes to blaster reviews, mods, and discussions; look no further than Fuzzy Walrus Industries.
Walcom S7
/ s4league

[@Kuli24000]

It's uncanny how relevant your content is to my modding/thrifting journey. I love it. Keep up the good work.

[@WalcomS7]

I'm excited to see what comes from the Regulator now that it's way more accessible to mod.

[@evanr1996]

That's super cool but couldn't you just get an fdl

[@WalcomS7]

@@evanr1996 ...yeah for a few hundred dollars.

[@evanr1996]

@@WalcomS7 I know but isn't the regulator like $75 already

[@WalcomS7]

@@evanr1996 ..they're 44$ on Amazon and the kit is 35, as opposed to the minimum of around 380$ you'd need to pay for an FDL-3 with the auto kit. My FDL-3 cost me closer to 600$.

[@noahmiller4839]

@@evanr1996 FDLs are possibly the best flywheel blasters in the world, but goddamn are they expensive. I'll spend the 50$ extra bucks to get my regulator how I want it, but Im someone who can't spend $500 on a nerf blaster, and the same goes for most people. Even if they have the money, very few can justify the cost. It's great for those who can, but there's definitely a market for much more affordable stuff

[@liamboulton2187]

There's way too few regulator mods out there. That shell has a lot of un-tapped potential

[@obamareloadsyt629]

Liam Boulton I agree...I am making mine a bolt action

[@darkwhite1259]

@@obamareloadsyt629 dafuq

[@homelee665]

Well. I have one Regulator that I intended to keep stock. I guess it it time for me to pick up a second.

[@Mackadotious51]

Yeah I’m one of the few who actually likes Regulator. Granted, the magazine-well placement is a bit off but this forces you to use a forgrip with this blaster which makes perfect. With that said, I got this kit on order now.

[@badimaaa4a548]

We need to get a bullpup mod out here for the Regulator. I can only see the mag release being a small problem.

[@WalcomS7]

Almost certain it's been done multiple times, but it's on my list.

[@OCNerf]

Whomever is on the electronics team for this and the v6 kit deserves a cookie.

[@willpsanford]

This seems like a great entry level kit for someone newish to modding

[@hyperjohn6627]

This is my favorite blaster!! I modified the stock board myself to run a duel battery setup so I could 2s lipo mod the flywheels and keep the select fire at a 1s lipo. It's just been super awesome for me, I think I will have to get this board anyway though. It looks really cool! Edit: I have no Idea how the stock board works, it was all trial and error untill it worked!

[@juusstis3664]

The regulator is one of the most underrated nerf blasters ever, and you can’t change my mind

[@Matt-md5yt]

seen that kit before. glad you gotten one and done a video on it

[@Mutt_Buncher4]

Me: Sees title Me: whats wrong with it

[@zsu-23-4kirov6]

@Monkeyman0490 Slow fire rate is my guess

[@aboringuy]

Based on the Regulator I have: - Sub-par performance (I can't get my regulator to reach 70 fps or above) - Inconsistent firing (The darts get caught on the side of my magazines only in my Regulator) - Slow fire rate (Slam-fire is faster than that) Or maybe I have a bad regulator. I don't have any friends with a Regulator, so I can't tell if mine is defective or not.

[@thogamestht]

ZSU-23-4 Kirov me2

[@halo1989100]

Actually it's the trigger response......it's a bit slow.

[@icompass]

ABorinGuy all of your problems are all the problems I have with the regulator, yours isn’t broken or faulty

[@nicbrown1409]

I love how comfortable its feels in the hands too

[@notmuch_23]

I need to film a regulator mod guide that uses a buck converter and MOSFETs to use Krakens with the stock select-fire board.

[@arct09]

The link to the mod redirects me and I cant find it on the website but it's good to know theres a mod so easy and effective out there

[@GeneralFlagg]

I use 2 Regulators in my standard war loadout, 1 (secondary) in a "minimized" configuration with no attachments and on full auto , and my primary which I'm running a afterburner using bits from a stockade, and hits 110fps and is set to burst fire.

[@shadowsa2b]

how does an afterburner set up work? i know its just a second set of flywheels, but is that like a second circuit on a stronger battery, or....?

[@VernardMartin]

I like that the flywheels are near the front of the blaster despite its length meaning you don't have tons of faux barrel to slow down your darts Great video.

[@darrenjacobson7456]

This is exactly what I wanted to get for my regulator ages ago. I'd given up hope of anyone making this. I'll probably buy one of these.

[@Smashimal]

I wish you could of saw any of our regulators at the Florida table. It didnt get placed until later in the day. We have 3 modded Regulators in the NCFNC. All 3 still have select fire although my personal regulator's burst fire is a bit wonky.

[@df6695]

Thank you for uploading this! I've been waiting for something like this to come for a while now. I always wanted to like the Regulator a lot more, but it's stock range and difficulty to modify was kind of a let down for me. Now I have high hopes I can make it what I always wanted it to be!

[@dr.jex___]

Mosfets?, 3s?, Brushless? Future!

[@Daniel_B79]

You're not wrong. That's dope!

[@manchild-zm6rs]

1 guy at the ncfnc loves using his reglautor that he has modded and kept the select fire option

[@aetherwise2159]

So 3 years later, I have come upon a regulator that could use some sprucing. Any follow up information on how this mod held up over time? Did it ever explode?😝

[@noahmiller4839]

Welp this was gonna be my stock flywheeler but you know I guess ill just set aside a stryfe for that

[@FflawedMetalhead]

That was a pretty badass intro, haha.

[@WalcomS7]

Amazing what little bit more effort does to a video. I want to always do more in videos but it's been difficult to find the effort lol.

[@JTNerfMods]

This Looks Awesome, I have to get on of these kits

[@sturmtruppen6666]

I just found out about this mod kit more recently and it blows my mind you can get a good boost out of a simple mod. It's especially going to be useful for me since, like you said, it's friendly to beginning moders. Also, I truly agree, it does not get a lot of recognition because of its shell layout and internal functionality. Ever since I first heard it was coming out, I saw it and was like, "that is a PERFECT lmg for cosmetic ww1 & 2 mods!" I love the regulator, no doubt.

[@Windle_Poons]

Love the Drop in nature of this. Soldering can go wrong and wreck a blaster..

[@narenthebeesechurgerman422]

WindlePoons yeah me too, I suck at soldering

[@owenreynolds9599]

Dang, time to pimp up my regulator to make it non-regular ator

[@froogy9218]

True

[@nerdtvch5]

I'm lowkey hoping to find one of these in a thrift store XD

[@clone734]

Could you put better motors, flywheels, and cage and still use this kit to keep select fire? Like could i upgrade this with a hyperfire kit and use this drop in kit to *keep select fire*

[@Videos4uByme]

Real nice. Definitely one of the most over looked blasters in my humble opinion!

[@WalcomS7]

It just fired too slowly to be useful unfortunately...

[@sonnyzhang963]

I WANT ONE !!! my regulator shall be REVIVED lol

[@The_Bionicle_Nerd]

Thank you For this I paid 175$ Canadian for mine A few years ago And now it will see Some action

[@machgt]

I'll be gutting 2 of them and installing my own select fire board along with some krakens, OLED screen, and lipo

[@patrickrowe773]

Thanks for the great video and the awesome content sir. I like seeing flywheelers other than the strife get some screen time.

[@alexbrett9867]

I have a regular and it’s my favourite blaster

[@drflux]

Just got one at goodwill for 9.99

[@OCTEXRC]

This is helpful! Might get one of these and mod it. Thanks mate!

[@firypig6292]

I LOVE REGULATOR I LOVE ITTTTT

[@TheSybermedic]

So much for upgrading my Stryfe, time to look for a Regulator and toss this board into it, more options, less grief. I got a regulator today at K-Mart for $32.

[@alexbrett9867]

The upgraded battery provides more power to the flywheels so that is why you are getting 100feet per second. Stock model will give you around 73 feet per second.

[@ryat66]

I use a stock Regulator. It's a pretty decent blaster. I liken it to the Judge Dredd Lawgiver Gun.

[@shadowsa2b]

in all honesty, the multi-fire modes are lacking in power. firing several sets of burst shots from a single standing position shows you that there are three dart groupings. the flywheels loose too much speed from dart to dart in stock form. it is not a terrible blaster by any means, it just benefits greatly from being fixed up like this

[@tatsuhirosatou5513]

I love the shell on this blaster I might need one.

[@1Scimetar]

I managed to spot about a dozen of these blasters at Fred Myers, a Kroger subsidiary here in the pacific northwest.

[@Simatech2007]

I found that you get a nice little boost from using the Lithium-ion 18650 batteries. I might have to order a board and see.

[@wolfbane3626]

I thinking put kit into my infinus to make a griffon blaster

[@Kai_Arrid]

Now I can make my regular a secondary

[@shadowsa2b]

a secondary to what? how is a mag fed blaster with reliable single fire AND full auto, with a bonus reliable 3 rd burst mode, secondary to anything?

[@froogy9218]

@@shadowsa2b idk maybe his primary is just THAT GOOD lmao

[@leeyuan6552]

It's really cool

[@jarcuadanantus28]

The most modding I ever did was a longshot solid stage 1 and 2 from Orange Mod Works, and it didn’t even turn out well. Darts get stuck in the tight barrel. So while you say anyone can do this, I’m looking at it like there’s no way in hell I could pull that off.

[@akagainesy]

Well that changes everything.. Myy girlfriends youngest has been asking me to mod his regulator since he got it a year ago and I've been stalling for obvious reasons. But now...... I think I need a regulator as well and tinker with cages wheels and motors 🙂

[@chrissoto7840]

I don't believe that anybody check if a conveyor belt blaster would work with small darts?can you check, just a question that I didn't know

[@WalcomS7]

I don't see a way of it pushing the short darts into the flywheel cage. The gap is longer than the dart.

[@chrissoto7840]

ok thank you

[@somethingsomething9081]

It is symmetrical as well unlike the Stryfe!. I need to see someone put the only aftermarket Flycage available into this and see how to get it wired up. I might just drop the stryfe to use this....

[@valeriagomez6563]

Dude it’s awesome I have to try it on mine

[@Primal2229]

I still say Hasbro missed a fantastic opportunity by integrating the select fire from the Regulator with the Halo MA40. Does it have select fire in game? Nope. But it would have had a much larger appeal and it'd have been more than a reshelled Rayven.

[@alex.thedeadite]

I got my regulator(my first electric) from a church sale for 3$. It didn't fire but all that was wrong was the conveyor motor has a gear box and it got misaligned just had push the gears back together and it started feeding. Was missing the barrel attachment and sight tho and came with slightly curved 10 dart mag.

[@Todd5747]

i hope they do another regulator run... maybe tweak it to make trb and full auto punch at higher fps than a semi-auto shot, fire faster, whatever would make it that much more popular. Better paint scheme?

[@badimaaa4a548]

*Awaken, my Regulators* *aaaayayayaaaya*

[@fish8256]

What lipo did you use

[@JP-JustSayin]

Could this kit be used to add select fire to a hyperfire?

[@WalcomS7]

I don't see why not.

[@TectalBeanNerf]

Great video as always, hope you fix your printer.

[@shadowsa2b]

in theory...if you have a half dart mag adapter that seats the mag in the front of the mag well, half darts may sit close enough to the flywheels that the belt pusher could still get the half darts there. in theory, at least

[@TheChrisCartaya]

I Have one Bnib, never opened, i should maybe do this!! Dude I'll keep an eye on mods you do with it.

[@Osysseus5277]

Can’t find the kit on the website

[@takeda8134]

same :/

[@jdsetter]

need this for infinus.... bricked mine when i tried my 3s lipo in it and haven't got around to trying to rewire it.

[@jaysonsmith9971]

I have a 41.5 crush OFP cage and worker wheels hitting 180fps, with all the original features. Here in Australia it's a Target regular. I used Outta darts MOSFET board on the rev switch, running on a 3s, and coz the battery tray was so huge, I used a 2s to run all the original internals. Yes that's right a 2 battery build, that runs all day! The stock pusher, loves the 2s and hits 7 shots per second. When I used this at wars it destroys peeps! I don't know why it's not a popular blaster?

[@WalcomS7]

Because think of all the hoops you had to do right there as opposed to just wiring up a Stryfe. Something like that fixes that completely and opens up the blaster a lot more. Now you can run the entire thing off a 3S and change the flywheel speed/ROF to your liking (at least I assume you can? I don't know exactly how these things work yet, but it has options for it).

[@jedileader0174]

The Regulator takes Cs not AAs, and I don't believe there are C size IMRs. Please correct me if I'm wrong because it seems that there is something new everyday now a days.

[@lukahtheunforgiving4751]

Awesome mod 👍🏻

[@gotloveforall01]

Where can I buy this kit in 2022?

[@nugrohowow4074]

you know this modul is so helpfull..i've been waiting this thing for 3 years since i bought this blaster.. now i am trying figure it out,, what if the select fire modul can be use for my rival perses.

[@builderbb8767]

Woah this could probably upgrade a Hyperfire no big deal just get the selector added and IR/Rec LEDs mounted

[@WalcomS7]

Could theoretically be used to give select fire and ammo counting to ANY blaster that uses an electronic pushing mechanism.

[@BenAgain452]

Is this board worth getting if I'm only going to use regular C batteries?

[@WalcomS7]

You might get a little boost but mostly not.

[@BenAgain452]

@@WalcomS7 So it's main purpose is that it can handle higher voltages, plus that ammo counter.

[@WalcomS7]

@@BenAgain452 Like I said it has a lot of features that I don't understand, and it's cheap. If you thirft/buy a second-hand regulator (or helpfully buy a broken one that burnt out), and throw the 35$ board in it you can get a blaster with all these features you typically see on much more expensive blasters. Then you upgrade the pusher motor and flywheel cage for another 20-30$ depending on if you buy the cage or print it yourself, and you have a blaster with great performance and a ton of features that cost you potentially well under 100$.

[@calebryszkowski4227]

Would this overvolt the stock motors? I don't know but I'm thinking of trying this but I don't know much about electronics. Also could you put in krackens and run it on a 3s without any other mods?

[@Todjlet]

Modding nerf gun with 6volt boards requires a buck converter tungstenexe has a good video on a good one on taobao that has both voltage and amp control.

[@crashman_tm]

This was my first nerf

[@matthewkonig5273]

I want a regulator now.

[@nzarthal]

It's my dream blaster. Unfortunatly I don't have the money for it.

[@chrispugh1031]

Just saw this and added the kit. What are the specs for the 2s Lipo?

[@polishscumbag3269]

Nerf shoots Subtitles applause and music

[@ianbui5356]

Are any advantages to using just the kit (without the battery upgrade)? I'd like to upgrade my Regulator, but I'm not ready to embrace LiPo batteries, especially when most of my battles involve little kids.

[@funkygreen80]

I know this is an old comment now but did you ever find out?

[@ianbui5356]

@@funkygreen80 Unfortunately not; it seems the only people who have it only use LiPos with it. I've been meaning to get one just to try with other batteries on one of my Regulators, but more urgent purchases keep getting in the way.

[@nebbynoo1127]

I love the regulator ngl

[@lukericszi2425]

Those darts you were firing were only 0.2 grams?

[@razorrb1234]

Would it be possible to use 2 IMRS in AA to C adaptors to power this instead of going to lipo

[@alexanderlumberjack]

Ok im getting one!

[@nicoharlan5703]

I bought this two seconds ago from a friend with the intention of modding it out into a beast, and of course it isn't really moldable *and* the link in description doesn't work. 😑

[@Agent1o1.]

Is it being sold anywhere now?

[@burninroses1755]

Curious, if I do this to my Regulator without any other mods other than IMR batteries instead of AA's, will parts of the blaster start falling apart or breaking after a few months? I dont wanna buy a $40 gun and destroy it.

[@DesertFox0420]

I went through three of these things. If you stick more than three imr’s in it, it would not work afterwords.

[@Spiritualwarlord]

Will it work with out the lipo battery just stock c batteries

[@driverbass1554]

Awesome stuff! I see you could use the Adventure Force darts in yours! I tried in my stock Regulator and the belt would chew them up and not push it in to the flywheels. Anyone else have this problem? Maybe because yours already had lipo it improved this? Maybe my Regulator is a freak lol

[@WalcomS7]

The original shots you can see it skip slightly but I thought that was from the banana mag. As far as I can tell they work fine?

[@joncomstock7542]

I had that problem as well, I realized it was the little cloth thing sometimes not letting darts though. I ripped it out and it works fine now.

[@Hotcat-lj8zx]

@@joncomstock7542 This is an old comment but can you explain please because my ekind waffle darts get anhilated in this blaster almost everytime I want to shoot.

[@rileyjamison1385]

the regulator is the first flywheel blaster I ever got

[@loudcanary5785]

I have this but the pusher keeps on ripping my darts how do you fix that?

[@Funkaxe]

Current link for a similar kit here: www.amazon.com/Goshfun-Motherboard-Repairing-Upgrading-Regulator/dp/B07TWC8FBM

[@jacobb6525]

I always liked the idea of the regulator and didn’t buy it because of lack of modification potential but now-

[@elginlaw8368]

I still need to get a regulator.

[@Jade-cs9no]

I still need to find a place to thrift

[@Super8Dover]

Ok so i can only do spring guns I have no idea how to do electronics can y'all give me advice on how to put everything in or what battery I have to use and how to connect that battery to the kit

[@wallywetterberg9500]

how did it hold up?

[@kiefervandenberg]

How does it count ammo?

[@B_Skizzle]

Well I guess I’ve got to get a Regulator now.