How to install Shower Valve to Copper Pipe DIY. Установка крана для душа

The Shower was installed - Esnbia Shower System, Brushed Nickel Shower Faucet Set with Valve and 12" Rain Shower Head Systems Wall Mounted Shower Combo Set for Bathroom All Metal
Amazon: www.amazon.com/Esnbia-Brushed...
Как самому установить кран для душа. Медные трубы.
#Shower, #diy, #howto

[@FixitAll]

May be you looking the same valve with PEX installation ? Shower valve to PEX pipe kzbin.info/www/bejne/j5W7nZJ9qtqNh6c

[@patricksamano8409]

Yes

[@Alaska610ish]

He makes the best videos! Fast, great footage, very helpful and done right! Thank you sir!

[@FixitAll]

Thank you for watching my channel !

[@dukdgr8]

This is what I need. No long dialogues and straight to the point. Thank you!

[@FixitAll]

Thank you so much!

[@victorenriquecarrilloorteg5093]

Bien con el fondo de la musica.

[@victorenriquecarrilloorteg5093]

Y sin palabras.

[@firstnamelastname9124]

I am installing that exact faucet ! So helpful to see the copper work - thank you!

[@FixitAll]

Nice, you welcome.

[@coryparker9614]

How did you seal it. I only see the circle valve sealers

[@mmhh936]

Perfect!!! Showed exactly the steps without all the wordy “look at me” stuff.

[@FixitAll]

Thank you 😊

[@jasmynehustito5748]

Thank you, Sir! This is exactly what I needed to see! I had an idea but you made it happen for real!

[@FixitAll]

Glad I could help!

[@tinman5640]

Your a beast 💪 my plumber got jealous because I showed him your videos , admit your really good. Thanks for your videos it helped him.

[@FixitAll]

Thank you.

[@benimgarco5310]

Bravo, muy buen video ,muy bien explicado👏👏

[@fernandosantiago6379]

I'm a plumber and hice been a lot of help thanks

[@andresgonzales9164]

Awesome video mister !! straight to the point

[@FixitAll]

Thank you!

[@BillieNguyen]

Thank you for showing us.

[@FixitAll]

My pleasure

[@frankkennedy5361]

Nice job!

[@gagash32]

Excellent instructions. Better than the instruction manual and video offered by Home Depot.

[@FixitAll]

Thanks 😊

[@soucaralegal]

thanks for the help👍

[@FixitAll]

Happy to help

[@ranjitpatel496]

Cool stuff

[@twoserve2449]

Nicely done!! 👍

[@FixitAll]

Thank you! 👍

[@chesantana981]

Thank you buddy

[@amineb5478]

Good job buddy

[@MOSHILOVE2016]

That was awsome 👌👍

[@FixitAll]

Thank you 😊

[@jonnywow2585]

Spasibo I just bought this system , that;s an awesome video

[@FixitAll]

Спсибо!

[@rutexas7157]

Thank you comrade!

[@FixitAll]

Thank you too!

[@prinone]

Thanks!!

[@FixitAll]

You bet!

[@tagheuer3488]

Thanks friend!!

[@FixitAll]

Any time

[@trueforum378]

you are still the best 4 years later! this is coming to you from an engineer

[@FixitAll]

Thank you.

[@Manthatsgood]

Мастер!

[@honolulu1476]

Cool

[@CreepySTATS]

Thank you

[@FixitAll]

You're welcome!

[@jaksonmelo8667]

Perfect 😊

[@FixitAll]

Thank you!

[@CP-ok1gv]

Watching at 1/2 speed and much easier to follow

[@FixitAll]

Thank you, you got it!

[@Rojs011]

Thank you for the video. Спасибо. I have a similar shower but mine has a tub spout. After installation I have a knocking sound in the valve area once you close the water. I am assuming this is two story house on the video as your pipes go up to the ceiling. So the " hammers" are not installed?

[@FixitAll]

No Hammers.

[@girafa726]

Thanks for the video. is there a way to adjust the water temperature on the POP faucet?

[@FixitAll]

I am not sure, I didn't see inside some temperature adjustment ring, like some models has. You need to Google this question to this model.

[@pl1619]

Прикольно.класс

[@jonnywow2585]

thanks for the great video , what is the range of depth this system has? consider 1/4 cement board and 1/4 tile ? thanks

[@FixitAll]

Can't remember. Manual book has diagram of installation dimensions.

[@redburner]

Nice video! How much did you make the cartridge stick out from the framing? Should the plastic trim come flush with the finish tile or stick out more? Thanks

[@FixitAll]

Im not remember. Manual usually says it. Or better to fully assemble the walve with trim and measure it. In this way measurement you must know the future wall, thinset and tile thickness .

[@rfv8050]

Good video, I have a question how far do you put the orange box out of the wall ,,, because I dont want the box to be inside the wall to much when I put the tile on

[@FixitAll]

I read manual, it says how far. And box has some marks for depth installation.

[@chilanguiux5231]

I got a question, Did you cut the cement board around the orange box?, or did you trim the orange box and left just the round valve striking out of the wall?

[@FixitAll]

I just install it. Cement board and tile was done by other company.

[@giovannitovar8514]

Gut

[@FixitAll]

Thank you!

[@TheBrownskin01]

awesome video! does the valve need to be near the wall?

[@FixitAll]

Check the manual. The manual show diagram how it must stay from front tile finish line.

[@marcstamant4304]

Hi, few pointers....You need to remove any cartridge before you weld and let the copper cool off ...plus I personally would go for a welded connection to the mixing box if available...that's leak free.

[@FixitAll]

You right, but, remove cartridge only need if you will solder directly to the brass body inlet, in my way no necessary to remove it. Like in this my video I removed cartridge kzbin.info/www/bejne/aWG8gWqJbNCmnJI Thank you for this tip!

[@emmanuel7899]

Todos los videos que he visto los comentarios tienen problemas con el manual en las especificaciones de grosor de la pared

[@cmbrewer84]

How far is the shower valve extended out beyond the studs? I’m installing the same system and I’m not sure on the proper depth

[@FixitAll]

You need fully assembly valve and check how far you need move valve with face plate to get flash with tile.

[@maxinelim473]

Hi, this valves can get certified approval for inspection new bathroom installation in New Jersey?

[@FixitAll]

I dont know.

[@markwaugh2613]

I just installed one of these,put my shower head and wand nipple 7/8 out wall for tile,i hope it works out,there is no room for error with this rough in.

[@richardtorres1293]

I just bought a set for shower bath combo with the wand. Instructions were useless. Set the ear elbows flush with my 1/2" cement board. How did the 7/8" work for you?

[@TheMemo1776]

i put my flush to the 2x4 plus 1/2 inc of cement bord n tile i hope my shower head goes in

[@ahjuns]

Do the drop ears for the shower head and the handheld shower need to be flush with the face of the finished tile, or do does the shower arm go into the finished wall partially? Thanks!

[@FixitAll]

Hard to say without knowing model and pictures of the shower parts. Usually the manual book shown how to install and all dimensions.

[@FixitAll]

I install the 90 degree shower arm elbow mostly close to the tiles or even in to tile hole and seal around the Hardy wall/tile, in case water leak water will flow into the room rather than in/between the walls. Watch this short episodes of seal example in my remodeling video : kzbin.info/www/bejne/bWGQdJ1npt9qnbc kzbin.info/www/bejne/bWGQdJ1npt9qnbc And hire the video what can be happen if 90 elbow not in tile and not sealed to the tile edges - water leak between wall - kzbin.info/www/bejne/rYeqfmSOZ7SJhrc

[@ahjuns]

@@FixitAll thanks for the info! How much of your threads from the shower arm actually screw into the drop ear? I can only get mine to go in about half way. Is that correct?

[@FixitAll]

@@ahjunsWas never checked it, I think its ok halfway becouse there is pipe tapered thread, not regular straight, so just apply Teflon tape and screw as much as you can.

[@samutya77]

Добрый день, какого-то диаметра pex pipe рекомендуете использовать для такой работы? 1/2 дюйм имеет меньше диаметр внутри чем медная.

[@FixitAll]

Да но 1/2 PEX это стандарт для всей проводки по дому. Никогда не видел чтобы в стенах было 3/4. 3/4 или 1 дюйм используется только для подвода воды от улицы к водяному нагревателю. После бойлера все трубы только 1/2. И не важно то медь или PEX.

[@samutya77]

@@FixitAll в комментариях у специалистов видел рекомендации для душа поставить больше диаметр🤔 не охота паять хочу pex попробовать

[@FixitAll]

@Joseph Bukalov можно поставить и 3/4, но только если вы будите их тянуть начиная от бойлера воды. А иначе смысл и как это будет работать? От бойлера идет 1/2, потом в душе у вас будет 3/4 ? И что 3/4 дадут , если подача к душевой комнате все равно идет по 1/2 ? В трубе 1/2 PEX давление воды такое что выбрасывает наружу 14 галлонов в минуту !!! А душевая головка выдаст всего 2-3 галлона в минуту. И зачем тогда спрашивается 3/4" труба, которая выдает 23 галлона в минуту?

[@FixitAll]

@@samutya77 Вот на PEX тоже самое, Shower valve to PEX pipe kzbin.info/www/bejne/j5W7nZJ9qtqNh6c

[@666MyBernardo]

How long it should stick out from the finishing wall ?

[@FixitAll]

The manual book shows itt. Im not remember.

[@ADmeditate]

What was the glue/paste on the brush you put in the copper fittings and the copper pipes before soldering them?

[@FixitAll]

Check online in your country/city paste for soldering copper pipe. I was used here in US this one - www.amazon.com/Oatea-Oatey-53017-Paste-Flux/dp/B000UTSSQO/ref=asc_df_B000UTSSQO/?tag=hyprod-20&linkCode=df0&hvadid=198093934741&hvpos=&hvnetw=g&hvrand=17832351563548866503&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033288&hvtargid=pla-350674583024&psc=1 www.homedepot.com/p/OATEY-H-20-1-7-oz-Lead-Free-Water-Soluble-Solder-Flux-Paste-301302/100177185?source=shoppingads&locale=en-US&&mtc=SHOPPING-CM-CML-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-SMART-2998850-NA-NA-NA-NBR-NA-NA-NEW-PL3_Live&cm_mmc=SHOPPING-CM-CML-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-SMART-2998850-NA-NA-NA-NBR-NA-NA-NEW-PL3_Live-71700000094213694-58700007814434200-92700071019453829&gclid=Cj0KCQjwxIOXBhCrARIsAL1QFCYYLM7GpbiA2hsYPlhPQeFQumQmRIqQqaPtl5Q7NdTjfAtLHmBMNqwaAg1mEALw_wcB&gclsrc=aw.ds

[@ADmeditate]

@@FixitAll thank you!

[@Adamantiis]

I have the same valve. Is there a way to adjust the cartridge temperature?

[@FixitAll]

I dont know. Read instructions.

[@JSIBachata]

Hey, do you know how to adjust the temperature of the water to a maximum temp like 110 Farenheit with this system? Other valves are easy to adjust but I'm having trouble with this one.

[@FixitAll]

Hi. Never done it. And the ovner never complained about temperature. So i just install it from the box like it was in factory setting.

[@JSIBachata]

@@FixitAll thank you. Where I live it's code to set it at 112 or bellow. If it goes higher than that, the inspector won't pass it

[@FixitAll]

Oh, i see.

[@clementejr2001]

Have someone find out how to get warmer water from this system?

[@anthonyvigliaturo8894]

on the threads, i see you sued both Teflon tape and some sort of paste. What was the paste and why use both?

[@FixitAll]

Just for sure it will newer leaking. I dont want come back for rebuilding this shower if it leaking from bad sealing.

[@FixitAll]

Here is a paste - www.homedepot.com/p/RectorSeal-T-Plus-2-1-75-oz-Non-Stick-Thread-Sealant-23710/100116773

[@anthonyvigliaturo8894]

Thank you sir

[@patricksamano8409]

I saw you didn't pull out any plastic from inside the valve. No problem with melting when you soldered it?

[@FixitAll]

As you can see, I'm not solder thread connectors on body, it was done on side. Then only elbow was done, and it's no problem. What can I say, practice and experience and not to overheating!

[@patricksamano8409]

Thanks

[@patricksamano8409]

First timer here.

[@FixitAll]

Well, in this case, you better to remove all inner parts before soldering.

[@kuriencary]

How did you know the depth to mount the mixer valve?

[@FixitAll]

You need to know full wall thickness - Hardy Backer wall + tile thin set + tile.

[@FixitAll]

Instruction shows all preparation and installation direction.

[@philwell76]

Can I trade the euro dance music for any idea how deep to the finished wall?

[@FixitAll]

Depend on thicknesses of the finished wall. The valve came with an installation instruction book.

[@TheGentlemanPlumber]

No air chambers?

[@FixitAll]

No. Its not necessary there.

[@raphaelfoscarini]

hello, i have same product. After installing, the pressure reduced a lot. Is there a way to fix it?

[@FixitAll]

I can't say anything. I just install it. How it work later can't say. But customers not call bak, so looks like all work perfect.

[@jasonrobinson9242]

Im having problems with the same set up pressure is low and the hot water won't get hot just warm

[@coryparker9614]

How do you water proof it?? I can only find circle valve seals

[@FixitAll]

In this project owner ask me to install valve only, rest of the work was done by other people. So i don't know what they done. Usually after tile valve covered by face decorative plate (circle or square) and seal by silicone around plate to the tile.

[@FixitAll]

Hire is what the owner has with this valve. In link you can find many different finish color option. So try to find from this seller just a face plate. www.amazon.com/Esnbia-Brushed-Systems-Mounted-Bathroom/dp/B07RM348YC?th=1

[@sitikholijah2563]

Untuk jalur air panas klo pake pipa paralon rucika aman ga bang

[@FixitAll]

Semua pipa terbuat dari tembaga.

[@Moriahcs1]

can you tell me the sizes for the copper pipe pieces you used?

[@FixitAll]

Standard 1/2 inch.

[@Moriahcs1]

@@FixitAll thank you

[@johnal4560]

how is this chines made shower kit that u had installed any problem leakage or anything ??? it is way cheaper than Moen and delta thx

[@FixitAll]

Never heard about problem. Not just this one - All faucets in America market made in China.

[@FixitAll]

I would say all what you can see in American stores made in China.

[@johnal4560]

@@FixitAll I bought some other sink faucet after a while the top chrome plated part start getting dots on it but I scare of leaking since i do new washroom and scare if i install one and it leaks than i have to remove the tiles that is gonna be costly Is this your own house that you are installing this ? and since you installed it there is no leakage or so ??? Do you have the link for this item thx

[@FixitAll]

@@johnal4560 Not my, customers. But they used it and no problem.

[@FixitAll]

Here is a link - www.amazon.com/Esnbia-Brushed-Systems-Mounted-Bathroom/dp/B07CZB8KY2

[@pepehandy]

Were is the water hammer?!!!

[@FixitAll]

Not important things for the shower.

[@godwinsamuel9821]

How to adjust hot water temperature on these

[@godwinsamuel9821]

Can you help with this?

[@FixitAll]

@@godwinsamuel9821 I am not done it. But. You can see the RED ring inside the handle. Remove it and reposition to left or right more or less.

[@emmanuel7899]

all the videos I have seen in the comments they have manual issues with wall thickness measurements

[@emmanuel7899]

Especially the drop ear 90°

[@FixitAll]

First what i do - assemble all/whole parts together on the valve - face plate, handle, knob and check where is they and how deep sit. Than add wall HardieBacker board thickness and tile thickness + 1/8 tile glue/mortar. Now you know how far to step the valve box from the studs. Done.

[@emmanuel7899]

@@FixitAll yes thank you I saw your video and help me a lot. Is for a client that I have, is first time I see this kind of valve they did tile already tomorrow I'm going to cut drywall and make adjustments

[@emmanuel7899]

@@FixitAll you have my like and subscription I have some plumbing videos in Spanish thank you so much.

[@FixitAll]

@@emmanuel7899 Glad it helps you, Thanks !

[@bw5970]

I did a Sunrise Shower looks similar. I ran the pipe for the shower vertically and the threaded drop ear was too deep in the wall. In the instructions they say the ear should be recessed .2 inches which is about 3/16 but if you run it plumb from the valve with the valve in the proper position relative to the wall it is recessed like an inch. If you tilt the pipe forward to get the drop ear to the proper depth then the bar that holds the shower head is tilted down. I bent the pipe forward and then back to plumb. Now the ear is the proper depth but the pipe is proud of the studs. Arrrgh! I need a threaded thing with ears and screw holes that is straight and not an elbow but only elbows at box stores and plumbing stores don't open til Monday. Arrrgh! THere are male to female adapter things i could use to bring the pipe back into the wall and the threads for the shower head arm out but not the preferred method. Very good job with the torch. No burn marks on wall in tight spaces. I was afraid to weld so close to the valve so i did the elbows a few inches farther away and took out the cartridge. I got a smaller flame torch after watching you. Thanks for making this video.

[@FixitAll]

Thank you so much!

[@madashell2]

I had the same problem. I had to buy nipples and couplers to get the extra length. I'm still worried about getting it just right becuase I'm doing tile and if the depth is off at all it won't work right.

[@MrBeast561055]

How’s it holding up?

[@YOURBOSS]

How is that sunrize shower holding up. did you need to change the cartridge?

[@paulhong2895]

My is created a lot of noise from faucet. Does anyone know how to fix it. Thanks.

[@FixitAll]

Check water pressure in the house. Some times it may reflect. Standard water pressure should be 50-60 psi.

[@viajes80]

Tiled before mounting ?

[@FixitAll]

Tile? Where the tile?

[@viajes80]

Fix it All , I just notice that the shower kit need to be installed before tiling the wall, there is some Allen screws that it can’t be accessed after tiling...

[@FixitAll]

@@viajes80 yes in my video its installed before tile.

[@viajes80]

Fix it All thank you

[@zambrano11100]

Hola podrías comunicarte conmigo, necesito instalar una llave iguala esta del video uno tengo quien me lo haga, vivo en Miami, por favor ayúdeme.

[@FixitAll]

I live in Seattle area.

[@mikrammikrammikram321]

Hy i im palmbar i need saeting grhoe shwar box Installation

[@FixitAll]

And?

[@reyesgarcia244]

No explico cunto debe quedar afuera por si floteas las paredes

[@FixitAll]

Muy individual. Depende del espesor de paredes y azulejos.

[@ZFlyingVLover]

The installation was solid but what sux about this system is that the square housing where the cartridge installs doesn't rotate so you MUST ensure that is aligns with the tile direction once the tiles are installed over the plumbing and the estucheon plate is installed over the assembly. That seems very short sighted by this manufacturer. I had this installed in my home and it can't be fixed without ripping out the tile. That is totally unacceptable. I've designed a workaround but it requires that I get a custom estucheon plate created. ugh.

[@FixitAll]

Usually manual book says the approximate distance to the finish surface. So, you must know the wall and tile thickness before installation of the valve box.

[@apex007]

What brand valve is that?

[@FixitAll]

I post it in descriptions under video.

[@apex007]

@@FixitAll sorry. Never look at description

[@BlahBlahManYeah]

chinesium, there are tons of the on Amazon with variety of names. Feature wise seems similar to some of x7-x10 times expensive Grohe sets.

[@apex007]

@@BlahBlahManYeah the rectangular design made me think of grohe, but it looked way cheaper. I believe the grohe ones are much larger.

[@lopee161]

@@apex007 I bought one from amazon brand name is Sunrise seems well made works great and the packaging is amazing someone made an unpacking video check it out at kzbin.info/www/bejne/iorQcp96m8mVo5I

[@mikethomas7138]

why not pex? why copper over pex?

[@FixitAll]

Owners choose.

[@nichopat]

It’d been helpful if you did talk though

[@FixitAll]

I don't know what to talk about here. How to spread the paste and how to solder? It makes no sense to give any dimensions because it is very individual when building and using different wall thicknesses and tiles.

[@user-ln4xl2on4u]

Евро смеситель.

[@mokhtargourchel8869]

Sitan bricole

[@FixitAll]

Thanks for visiting my channel!

[@kodaeninc.6726]

bad design. great skill saves the whole video

[@FixitAll]

Thanks for the view

[@user-er7gx5sm6g]

Horrible

[@donnflacco]

👎

[@FixitAll]

Owner really love it.