Get Plans to build your own DIY 10x12 Shed! shop.fixthisbuildthat.com/collections/outdoor-projects/products/modern-10x12-diy-shed-plans If you want to see the rest of the build you can find the videos here: 1. Building a Shed Foundation - kzbin.info/www/bejne/jqDHlICeq8uejsk 2. Framing a Shed Alone - kzbin.info/www/bejne/mXjUqWxrf7umrdU 3. Roofing a Lean-To Shed - kzbin.info/www/bejne/fqeWdoKKoLdmrtk 4. DIY Shed Doors & Windows - kzbin.info/www/bejne/qKGWo32LjK-Ygac 5. Finishing My Overbuilt Shed - kzbin.info/www/bejne/q4GyZWmeiNWDZqM
@jackgorman4453 ай бұрын
❤
@jackgorman4453 ай бұрын
❤
@rufuscaffee19753 ай бұрын
What is the estimated cost of materials for this project?
@Thats_Mr_Random_Person_to_you5 ай бұрын
Love the New Yankee Workshop safety reference. LOVE that they've uploaded all vids to youtube. Its little nods like that, that prove how inspirational that program was and how far its reach was (and still is).
@missingsemicolon11195 ай бұрын
Started watching those on YT, nice to see them preserved as I used to watch them when I was young along with This Old House.
@erinreiss95073 ай бұрын
I love your building process. It matches what a diy person actually does. Build a little, fix mistakes, build a little, fix mistakes.... I appreciate that when things don't go smoothly and that you keep that on camera. Great job!
@dbann90206 ай бұрын
Ha! Just yesterday I was thinking: “I wonder if that guy ever finished building his shed…?”
@Fixthisbuildthat6 ай бұрын
Spring has sprung so I'm back!
@kayosfrawg5 ай бұрын
If you lay your osb horizontal, that is how I was taught to install it, you can use the premarked lines for locating your studs. They usually come with lines for 16 and 24 on center. Then you don't have to snap lines for your studs.
@benji99302 ай бұрын
Thats is correct and the sheating is meant to go horizontally because it will catche more studs and add lateral strength. He should of did it like he did his floor sheathing.
@anthonyfreeman58586 ай бұрын
I’m glad to hear that someone else has some trouble building/fixing something’s. You did good, once you got started. I am using your phrase, “Mistakes were made” when I goof something. It’s just soooo true.
@MoGhotbi5 ай бұрын
I learned a lot building my own shed - one thing I did was extend the back birdsmouth cut so I could slide the siding up under it. Everyone should try their own shed build.
@shane5556 ай бұрын
Good on you for showing your (very minor) mistakes. Most KZbinrs only show the best bits, which makes the viewer think they should also achieve this perceived "perfection"
@Fixthisbuildthat6 ай бұрын
we embrace the mistakes around here
@davinlaroche30295 ай бұрын
Plus, at 200 mph, you won't see 'em driving by. 😁
@rickcimino54835 ай бұрын
the boards on the front and back ends of the rafters are called "sub fascia" and the rafters on the two ends are called "fly rafters" since they are "flying" in space and not over the building. That type of house wrap is an air infiltration barrier, not a vapor barrier. Generally, when doing a roof, we run a shingle up the roof too to establish the overhang. Finally, you did not have to put so many nails in that final drip edge at the top of the roof (end of your work). You could put it down with a generous amount of roofing cement (comes in a caulking tube like the sealant you were using) and then just nailed it a few times. This video was worth the wait from December Brad. Thanks
@McDaggart6 ай бұрын
top tip for any shed, make the over hang massive so water never hits the sides or soak the foundation and potential rot the sill plates
@Fixthisbuildthat6 ай бұрын
yup, I went with as much as a I could to fully use the lumber I bought
@darmichar736 ай бұрын
When you were using the story stick and moved from the front to the back, I knew for a fact that was the point I would have flipped it or otherwise used it incorrectly and wouldn't have caught it until I was setting the rafters. When you set the fascia board upside down, I could totally see myself doing that too, especially working alone. Thanks for leaving the oopsies in too. You can't learn if you don't make a mistake occasionally.
@Fixthisbuildthat6 ай бұрын
after the fact I realized the story stick was where I actually went wrong, not the fascia. I marked the stick upside down while looking at the drawing. so actually the fascia should have been correct 😀
@mortimersnead58215 ай бұрын
Small blocks of framing lumber are prone to splitting. You can pilot drill them, but it's generally faster to drive a nail or screw front to back and that holds the grain together as you drive a fastener the short way. Hook blades are way easier for cutting asphalt shingles. Start your cut 1/2 inch in from the edge and cut that short gap last.
@CalebCalixFernandez4 ай бұрын
I had never done any kind of construction work in my life, but regarding roof installation, it always made sense to me to begin down moving upwards so that whatever material used for roofing gets the overlay gaps on top thus preventing water going down the roof.
@Fixthisbuildthat4 ай бұрын
yep, exactly!
@SawdustmakerLori6 ай бұрын
Great to see you're back working on the shed Brad! It is really taking shape and looks so nice. Thanks for sharing all the tips and also things that didn't go as planned. That helps us all!
@danbert85 ай бұрын
I used the ForceField panels on my backyard office and was very impressed with the panels. They were left exposed for 3 months and I had only a couple of leaks from over driven nails that I was able to fix with flashing. I also did use Zip system tape with the panels because I saw a lot of negative reviews on the GP tape. It worked out great.
@RaymondPayne-o6p2 ай бұрын
The editing in between nail shots... respect
@guybowers90946 ай бұрын
The shed is coming along nicely. I do feel your pain in respect to the weather. I started my shop and the weather was great then we got some rain and it wouldn't let up. Since i attached it to my existing garage the roof on it was exposed so the rain got it out too causing some water damage
@Fixthisbuildthat6 ай бұрын
yeah, doing a project by yourself over many weeks makes dealing with weather a big unknown
@patrickkerley640222 күн бұрын
Thank you for dumbing down the rafter tail cuts...been wondering how to do that for years.
@oilcitywoodworks2 ай бұрын
Ah yes, back when I was framing houses in college we heard the phrase, "it's getting covered up anyway" fairy often. Hahaha. But for real though, those rafters were just fine, for sure. Great job on this build series. As always, I am really enjoying your videos. Keep 'em coming. Thanks!
@sapelesteve6 ай бұрын
Minor mistakes and all, you are doing a terrific job building that shed yourself Brad! Great job!! 👍👍🔨🔨
@JorgeAguilar7145 ай бұрын
A tip for anyone doing a roof soon. A laminate floor cutter (the guillotine style) works awesome on shingles . You get perfect straight cuts every time and is a huge time saver.
@Sudcalifornio3 ай бұрын
ya mero voy andar subiendo esa herramienta al techo, mejor navaja de gancho
@martendschrage5 ай бұрын
Great to see the salvaged boards. Too many KZbinrs throw away perfectly good boards after remodels.
@GardenreetLighting4 ай бұрын
Fantastic job on the roof installation! It really ties the whole shed together beautifully. 🏠
@namkebanyanklariti2 ай бұрын
Goodness gracious great balls of fire.
@alwayzdrummin5 ай бұрын
Thanks for getting back to this project!
@dadlife82896 ай бұрын
Thanks for the video. I was looking forward to this one. Makes me want to try to build a shed
@Fixthisbuildthat6 ай бұрын
it's not any easy process, but rewarding
@electricianron_New_Jersey6 ай бұрын
Brad, the best part is you are doing this all yourself.
@Fixthisbuildthat6 ай бұрын
my body would disagree
@electricianron_New_Jersey6 ай бұрын
@@Fixthisbuildthat I hear that!
@RichardPlace14 ай бұрын
The ghost deer get me every time! 🤣🤣🤣
@benji99302 ай бұрын
H- clips are design to add strength and keep your roof sheating connected between rafters. You may get some uneven sagging spots on your roof. As well wall sheathing is designed to fo horizontally to catch as many studs as possible to strengthen the whole wall. None of those things are major issues on a small shed but would be on a bigger build.
@MCsCreations6 ай бұрын
Really awesome work, Brad! It's looking fantastic! 😃 You know, we had to replace a plastic roof here, it's just a small roof over the laundry room... And they installed a sheet of composite aluminum. And... Holy sh*t, you need to take a look at that material! 😮 There was a strip left over from this and they gave it to me. It's going to be freaking useful in the shop for jigs and stuff! Anyway, stay safe there with your family! 🖖😊
@Fixthisbuildthat5 ай бұрын
that sounds cool!
@timothycreasy21616 ай бұрын
Working out doors in the winter is no joke. I dont blame you for holding off
@Thomas0910946 ай бұрын
Brilliant, can’t wait for the walls now :) soon as you do that video I’m going to follow step by step to make my shed :) love you and your family love the channel content :)
@Fixthisbuildthat6 ай бұрын
thanks, Thomas!
@Thomas0910946 ай бұрын
@@Fixthisbuildthat your very welcome. All your content is great, I love the fact you leave in your little mistakes to show we’re all human :)
@mikethomas30696 ай бұрын
Pull layouts for you top plate on ground before you stand your wall up won't need to get up on. The ladder again. Yes I know won't work every Time but it can ALOT
@Fixthisbuildthat6 ай бұрын
good tip
@RJLH7729 күн бұрын
Love the Norm Abram reference!
@markhutton68245 ай бұрын
Two years ago I had to replace the roof on the summerhouse at the end of the garden. I had to replace 60m2 (645.835ft2), I used OSB2 2440mm x 1200mm which were 18mm (0.7 inches) thick (2.44m x 1.2m or 8ft x 3.937ft). After removing the very cheap roofing felt I removed the rotten boards, glass fibre insulation and had a break. I replaced all the panels lifting the OSB boards on to the roof using temporary batons to stop the sliding off and fixed them in place, noticing quickly the "professional builders" that had built the summer house didn't know what a square was. Battery powered Circular saw and impact driver were my friend, the sodden glass fibre insulation (after killing all the bugs living in it) was replaced with recycled plastic bottle insulation (it doesn't soak up water and bugs can live in it). Once the roof was finally replaced I went about installing new roof felt, this was thicker and reinforced with glass fibre it was a lot heaver it came in 3m x 1m (118.11 x 39.3701 inch) rolls.. in total eight were used and I covered each OSB gap with bitumen and then used it along each long end of the sheet to secure it in place along with the felt nails at 100m (3.93701 inches) apart. The whole replacement of the roof took four days with breaks to get new insulation or to get more screws and lift materials in place. Yeah metric is difficult... I count to 10 and you are welcome to your fractions.
@ShopNation5 ай бұрын
God I love shed videos 😜
@Fixthisbuildthat5 ай бұрын
just trying to keep on your timeline...4 months to go
@dynamiscr6 ай бұрын
I really missed those deers man!! Great build
@LifeLessons-tk1kyАй бұрын
Outstanding next level quality build,,,,great job
@karatekid109085 ай бұрын
Good to see the shed getting done. If you do more work with shingles I would highly recommend getting some hooked blades for your utility knife. Works much better than the normal blades!
@EverydayShed5 ай бұрын
Love the Shed!!!! Looks great!
@Zenkai765 ай бұрын
I feel honored you featured my comment! Lol this is perfect timing because I'm about to redo my shed and I'm nervous about doing the roof. Love your channel, keep it up.
@voidisyinyangvoidisyinyang8852 ай бұрын
drip edge - didn't know about that part
@petesmith31863 ай бұрын
Thank you!
@arnaldocuevas685 ай бұрын
You are my favorite KZbinr woodworking person. You show that mistakes happens but we have to deal with that and accomplish what we want to do. Not the traditional channel where everything is perfect and pretty 😂.
@robertboughton116 ай бұрын
Good luck with your new shed
@Fixthisbuildthat6 ай бұрын
thanks!
@melissabates77056 ай бұрын
Excellent video! I like that most of the video you were on your own. Good hacks to help when you are on your own.
@michaelholmes48085 ай бұрын
The nod to Norm....... love it.
@jimbehrend43276 ай бұрын
Doug all of those trees are worth the effort. The first tree cut into sections that you can move with your excavator. The second leave attached to the tree and section it off until you get to the tree. Again use your excavator as possible for assistance. The next 2 your ideas are correct get the weight off the tree and cut it. When cutting off your stump use you excavator bucket and cut from it. Cut the base and pull down hill. The ones you said you would leave. Leave them. The last one is very tough. Having a crane or bucket would be the best way. All of them would be extremely expensive to hire out.
@paultomori3 ай бұрын
very helpful - thank you.
@reforzar5 ай бұрын
You’re looking for fascia board.
@keithf52365 ай бұрын
it's coming along and looking awesome! Before you know it, Susan will claim it as her she-shed :)
@Fixthisbuildthat5 ай бұрын
thanks, Keith!
@dan83266 ай бұрын
9 minutes or so... its not a ridge board its called either sub-fascia or fascia fepends on how it finishes. A ridge is where the two sides of the rafters/roof meet in the middle.
@Fixthisbuildthat6 ай бұрын
ahhhh, good to know
@dan83266 ай бұрын
In this case, it would be sub-fascia.
@robertcarullo49263 ай бұрын
I don't know about shingles on a 2/ 12 pitch, 3/12 is usually the minimum. should have used a rolled roof, just saying I have been doing this stuff since I was 20, that's 40 years. just aged me. lol.
@Sudcalifornio3 ай бұрын
+1
@trevorgreene50596 ай бұрын
Very cool build and I really like the story stick idea. It expedite the process of marking and laying out the rafters. I also appreciate you leaving in your mistakes.
@e.bertrams5 ай бұрын
Nice to see the Ghost Deer hanging around, contentedly chewing some Ghost Grass 😊
@sophwitchproject5 ай бұрын
Not the ghost deer in the background 😂🦌
@adama1635 ай бұрын
I like how you sped up the triple chopsaw cut sound to match the tempo of the music
@TheCopperVillageAngler6 ай бұрын
Great job!
@Fixthisbuildthat6 ай бұрын
Thanks!
@MikeKafes5 ай бұрын
Thank you for making me and my splitting support blocks feel normal 😅
@kevintremblay12116 ай бұрын
Longest Shed build series I have watch thus far :-)
@Fixthisbuildthat6 ай бұрын
guess you didn't watch @shopnation shed build then 😂
@Cesesq5 ай бұрын
Bonus points for the Norm Abram callout.
@mezza01885 ай бұрын
Your videos are awesome!! So clear and love how you show your mistakes 😂 I'm going to build a shed soon and pretty sure will make some too. Keep up the great work man! 😊
@stevelemieux9856 ай бұрын
love the part you realized that face plate was longer on one side than the other so funny...and yes I have made these mistakes and still make them
@Fixthisbuildthat6 ай бұрын
happens to the best of us 😂
@wallacegrommet93435 ай бұрын
Thank heaven for screws
@pileofstuff6 ай бұрын
@2:41 Thanks Norm!
@snapsetup5 ай бұрын
I love the Norm Abrams nod!
@dontask78985 ай бұрын
Always amazing to see how many more nails someone will use out of a gun instead of screws.
@rockstarfan8866 ай бұрын
Thanks norm great build
@gefflynn717119 күн бұрын
Just the tips I needed! Thx "LIKED"
@karlscaife69706 ай бұрын
Nice,thanks for the tips
@Fixthisbuildthat6 ай бұрын
You bet
@justanotherchannel60972 ай бұрын
This man took a 3 day project to 2 years
@robertcarullo49263 ай бұрын
The yellow tape for the roof, its good, but the zip is way,way better.
@stans52705 ай бұрын
Great job! Every time someone shows laying shingles they warn to avoid wind sheering to NEVER use less than a one-third sheet when ending a row. I can't wait till Christmas to see the lap siding go on.🤪😜
@tombo5520012 ай бұрын
Try starting in June when summer is coming 90 degree
@moeed7232 ай бұрын
You should use nails instead of screws for framing. And install OSB horizontal
@robertkerby25815 ай бұрын
AbAbsolutely Amazing job on your shed build project! I really appreciate your common sense approach to the building process! I really like the selection of products for your shed project build, too! Well done, Sir!
@michaelcrouse93346 ай бұрын
Dear Editor, Thank you for the Piccard facepalm. That is all. lol
@Fixthisbuildthat6 ай бұрын
yes, I thoroughly enjoyed when Chris put that in. Was a huge STNG fan back in the day
@michaelcrouse93346 ай бұрын
Same here, grew up on TNG, Voyager, DS9. I enjoy when the creator and editor have a good banter. Hopefully I can find that one day. I'm also a HUGE Star Wars fan, lol probably one of the few how loves both. @@Fixthisbuildthat
@aaronfu25 ай бұрын
If you'd just used the same paint on the fascia (or any old / leftover paint) on the backside of some standard OSB, you'd have made your own "Force Field" but better. Especially if you paint all of their edges as well. Edge first, then install, then use a roller on the entirety.
@jasonwatzka7025 ай бұрын
Nice job! I really would have encouraged you to use 5/8 sheathing on the roof though! Especially because of the rafter spacing and low pitch. Unfortunately you will get sagging. Perhaps you can add some blocking between the rafters preventatively
@geewhiz50505 ай бұрын
3:30 nice touch with the ghost
@geewhiz50505 ай бұрын
Just realised there are ghosts through outh the video 👻
@terencemerritt5 ай бұрын
Thank you for the safety tip Norm
@kyleryan49365 ай бұрын
You should have put the drip edge on the front edge of the roof when you were doing your second to last row of shingles, once the drip edge was nailed down you could’ve put the last row of shingles on top of the drip edge, you would just peel up the keystone and nail under those then reseal
@ofwoden5 ай бұрын
I enjoyed the Norm Abram quote!
@robertcarullo49263 ай бұрын
love you show how mistakes can happen, like in 👍real life.
@mestizo_asia6 ай бұрын
Normally you would use a hook blade when cutting shingles. Makes it much easier to cut.
@Fixthisbuildthat6 ай бұрын
Agreed, but cutting from the backside makes it pretty easy if you don't have a hook available
@djvoodoo014 ай бұрын
I like how the nails go to the music
@siruseusesir5 ай бұрын
wow, thanks for sharing my friend, great new share
@MH-qq3kj6 ай бұрын
Nice job! Simple sheds are not that simple.
@Fixthisbuildthat6 ай бұрын
no they are not
@davefreeman14992 ай бұрын
I would always use housewrap even on a shed.
@phl405 ай бұрын
Your property is beautiful!
@Fixthisbuildthat5 ай бұрын
thank you!
@davidbutton35005 ай бұрын
I would argue that not putting your hand under the blade when cutting is a more important safety rule, than glasses. :)
@chrisflavelle12005 ай бұрын
Remember that Norm added hearing protection when using power tools!
@fredyquiroz76545 ай бұрын
Great video, I was wondering what was going on with this build. LoL Keep them coming
@GTL775 ай бұрын
The H clip are to help support the sheet between the rafters not for spacing
@robertcarullo49263 ай бұрын
looks good, if you didn't have enough waste for the blocking, your have to use a 2x6x8 and break it down anyway. lol
@NOOBKRISH5 ай бұрын
That deer ghost is a easter egg maybe😂
@mos85415 ай бұрын
out of all the silly sally quotes and blurbs on all of utube.... MISTAKES WERE MADE... is the best, been using it for many years, LOL... smFh
@c.davidcook35655 ай бұрын
Good job "Norm" 😁
@vmoutsop5 ай бұрын
Thanks Norm.
@ohiofarmer59185 ай бұрын
A two on twelve pitch is really pushing the envelope and increases the probability of wind driven rain getting between the shingles and the membrane. Back in the day the manufacturer recommended increasing the lap of the shingles on two twelve. Not possible today as the sealing strip tech is different. I would consider four twelve the minimum with five twelve still easy to stand and work on without slipping while walking the roof.with a five twelve, the rafter length is only an inch wider for each foot the rafter covers per foot of building width. It is exactly .97 ,but you get the idea. It becomes even more important if you heat the building to work inside because of ice dams becoming more of a problem. Other than that, you did a much better job than most by laying things out on the ground instead of chasing a tape measure Found the top plate with a marking pencil as Most people do