FL5 Cusco Power Brace and Sway Bars

This week we make the FL5 stiffer with Cusco Japan power brace and swaybars!
Cusco
Front Sway Bar 3F7 311 A30
Rear Sway Bar 3C4 311 B22
Power Brace Front Member (Subframe) 3C4 492 F
Power Brace Center (Direct OE Replacement type) 3F7 492 C
Power Brace Rear Member (Subframe) 3C4 492 RM
My Instagram
/ phothrottle
My TikTok
www.tiktok.com...
My FaceBook
www.facebook.c...
Buy Me A Coffee
Support my channel
id=603830016www.buymeacoff...
The Tint Studio
thetintstudio....
IG: www.instagram....
Invision Auto Imports
www.iaimports.com
Sub60Racing
sub60racing.com/
/ sub60racing
Peter Luu Real Wheel Deal
linktr.ee/real...

[@TexasExotic]

For the rear power brace, you don’t have to take the hangers down. Just go in left to right with the brace in a vertical position. Then when in position, lay it down horizontally and make adjustments as necessary. Regardless, super nice work, man! Torque specs are key. You and I have the same mindset.

[@phothrottle]

Thanks for the advice appreciate it. I definitely could have used it during the installation hahaha

[@TexasExotic]

@@phothrottle haha nahhhh just showing the young guys there’s more than 1 way to do a job, that’s all.

[@FreshFL5]

The Cusco blue looks awesome!

[@boolji]

Cusco also has a rear motor mount for the FL5! they call it 'pitch stopper'

[@phothrottle]

Nice can you share the part number please. Thanks

[@boolji]

@@phothrottle 3F7 911 PS

[@phothrottle]

@@boolji thanks!

[@phothrottle]

I tried looking up the part number and it comes up invalid. I also checked to my Cusco rep and he says there is no such part as of yet.

[@rgmedia2996]

3C4 911 PS That’s how I found it

[@lgjg7441]

Im having a hard time figuring out if this will fit a 2023 integra (basically 11th gen Si). Website says fitment confirmed for Type R only

[@phothrottle]

I asked Invision Auto and they did say they it is different. Give them a call. They can help you get the right ones. maps.app.goo.gl/bCkjrM8c2EvDetYq9

[@yogimaster2654]

Thinking about getting that center brace . I have the Cusco front power brace and the front strut bar for my FL5.

[@phothrottle]

Was the front power easy to install?

[@yogimaster2654]

@@phothrottle yes super easy😀

[@phothrottle]

@yogimaster2654 good to hear!

[@WishlistProject]

Hello from malaysia 🇲🇾

[@phothrottle]

👋

[@axledog7297]

Now the question is - can you actually feel these?

[@phothrottle]

To the average driver probably not. Probably doesn't know what they feeling for. You would have to push the car pretty hard to feel any difference but every second counts on the track.

[@Dat.FL5]

🔥🔥

[@OnederElite]

What chasing js bolts did you use for the under shield Phillips screws?

[@phothrottle]

www.chasingjs.com/product/chasing-js-titanium-fender-hardware-kit-6pcs

[@phothrottle]

M6 x 12mm and get the large washers

[@OnederElite]

@@phothrottle thank you!!🙏🏻

[@WTS-XX]

What wheel and tire set up are you on ?

[@phothrottle]

***Tire and Wheel Specs Advan Neova ad09 265/35/18 ADVAN RACING GT PREMIUM WHEELS - UMBER BRONZE 18x10 +40