Flash Jetpack 6 to Jetson Orin Devices: Tutorial & Demos!

[@shucheng-k6l]

I have a Jetson Orin Nano 4GB development board, but its carrier is from other manufacturers. Can I also upgrade to Jetpack 6 according to this solution?

[@ramanan4589]

in my board gpio are not working do i need to do anything on pinmux?

[@viorelgheorghe5655]

Very interesting info! I've managed to put JP6 on J4012, it had some WIFI problems, but after an update and some help from the seed forum is working. Now I struggle to make functional an capture card that has worked on J4012 with JP5.1.1, but on JP6 give me errors :(

[@youjiangyu]

Please feel free to send an email to seeed technical support team describing the issues you're currently facing. Seeed's engineers will do their best to assist you in resolving the problem.

[@viorelgheorghe5655]

@@youjiangyu Thank you! I'll do this again. Previously I've talked to them regarding a custom case for J4012, and they have gave me guidance😊

[@michaels1663]

What was the resolution to the wifi? I ordered the J4012 and I will be updating to JP6 when I get it.

[@The22v10]

Hi there, From the Seeed forum , This is the biggest problem to this hardware is doing updates. No published Device Tree make it hard to troubleshoot or fix issues like No Hdmi output. I see that a lot and also No WiFi working after the update. Is the documentation on the wiki updated? Sure looks good and has come a long way.

[@youjiangyu]

In our testing, both HDMI and Wi-Fi are functioning properly. If you encounter any issues during use, please feel free to send an email to our technical support team. Our experienced engineers will be happy to assist you in resolving the problem.

[@JorgeAlberto91MS]

Issue related, HDMI just showing mouse pointer and anything else, solved accesing boot menu selecting the same boot device, and then start normaly