Flat Bit Driver Mod for Leatherman FREE series

[@basp-ef7jx]

If "some guy" on the internet can design and manufacture this, why couldn't Leatherman do it? What's wrong with you Leatherman?

[@adamthomas1222]

It's all about cost... Simple as that, marketing would put a budget of the maximum price the tool would be sold for and the engineers and designers would have to work around that manufacturing cost . This tool is already expensive at launch even by Leatherman standards, imagine adding 30usd on top of that price (I'm just assuming it'll be the same price as this guy selling this mod) so yeah marketing knows nobody is buying the new tool if it costs that much and not getting enough profit.

[@mr.cool-ice]

This mod is an absolute game changer! Combined with the ratchet extension and a socket adapter it goes up another level! Other Leathermans may already have bit holders but none are as accessible as this! You really are a wizard Zap!

[@knifetrain3118]

I installed mine last night and this tool and design is absolute genius! If your on the fence about this accessory don’t be Leatherman should have done it in the first place!

[@95666]

Thanks for installing it on my free p4! Top notch service.

[@jhoff80]

You should start getting a commission from Leatherman. The only minor aesthetic flaw is that you don't get that nice satisfying magnetic click when you shut it... but functionally it's great. Might end up putting one of the stock pieces back on the other side to replace the ruler / awl but haven't decided yet.

[@buckshot1955]

Recently installed your bit adapter and bought your holster with the bit and extension holder. It adds everything thing the free needed. Fantastic. Keep up the good work.

[@knifetrain3118]

Just ordered one for my P2. I'm planning on putting it on the opposite side replacing the can opener, ruler, file and the awl. Those tools are too short to be useful to me. The bit exchanger is much more versatile for my needs.

[@TikkerLoS]

just wanted to pile on, you do a ridiculously good job with these mods. super impressed, and secretly want you to apply talents to the Surge ;)

[@PurpleMomgoose]

The Surge? I misread that as surgery first haha

[@TurkishKS]

I just decked out my p4 with this, the thumb tabs, and the T-shank holder. So impressed! Thank so much! Really great work.

[@plexuswoodworks1771]

Holy moly. I just got a p4 for Christmas and was pretty disappointed with it but looks like you have the answers.

[@BrendanBrown1]

Wow, thank you SO much man. I ordered one about a week ago and just got it yesterday, and it works and fits amazingly well.

[@sedacon]

Amazing job! Haven't been on Multitool or EDC forums in a while and just discovered this. I've mildly tinkered with my Surge(s) over the years and my only claim to fame would be my Squirt PS4 Frankentool I made from various Leatherman keychain tools years ago. I will definatey be making an order. My only request after seeing this and the soon to come t-shank mod would be for a Surge-like awl and can opener. That would probably make the Free series complete for me. Thanks again for your work. This is perfect!

[@Genesis992]

Hooooly crap! You did it! I’ll be ordering one of these to add to my P4, along with the holster!

[@dudeymcduderson]

You just need to make your own tool from scratch. That’d be awesome!

[@chaselove603]

great addition to the P4

[@jimbarbwe1985]

F me youtube gave me a recommendation for a video that is amazing, I just hope that I can get this in the UK with out it costing more then the leatherman. Have you ever thought about approaching Leatherman as an independent R&D consultant focused on personalised service, I understand these might no be 100% consumer product in regards to testing and possibly accreditation but you are 99.9% there. No matter what you have a particular skill set that seems to be commercially viable and I do hope this brings you joy/happiness, options and wealth.

[@ZapWizard]

I am pretty sure they know my stuff exists. A recent AMA revealed that some of the engineers have "customized" free series, but that may just mean etching. Shapeways ships to the UK from the Netherlands.

[@macgyverbryan1377]

Awesome bit holder! The awl/driver is a better package and clam shell opener.

[@Gillysaurxx]

Kick ass. Now the only other thing i would need to change is that combo blade

[@neeko7878]

So I actually know what you mean now... Laser Sintering...not centering. I that these are very durable hard plastics, not metallic. Went to shapeways sight and did some digging. Very cool stuff. Love the dice on your site too. 👍

[@Huffmommy]

They’re metallic… 60%steel 40%bronze. They have material properties, elastic modulus, tensile strength, and yield strength that are better than ductile iron

[@Welther47]

I can't believe the Free's doesn't come with this part! I think the Free is too expensive to not have replaceable bits.

[@danc2531]

Would this mod work with the Free K4 as well? This is fantastic.

[@koujita358]

P4は製品として明らかにアドバンテージがあり魅力的だけど、拡張性が足りない。でも本ツールであれば問題解決できますね。いいことを知りました。

[@jimbarbwe1985]

You also earned a subscriber. Get the CAD files over to AvE for some town pump cnc action

[@edwardfletcher7790]

It's a very clean, simple & robust design. But, its got so much wasted plastic space and compromised tool lengths ! Also, would it have hurt to include a 5 cent plastic toothpick ?? Hopefully the next generation is more refined with a more optimised design.

[@NewZonaRides]

Just ordered one. Can't wait to try it.

[@Jake-dh9fb]

How do you like it?

[@torin3167]

I'm buying your mods before I get the free p4, because I'm a freak. I'm still working construction, and i want a lighter tool. That darn p4 looks good but it's missing two things, this and the T shank mod.

[@AkumaQiu]

You are the M Carbo of the Multitool world

[@jnj2233]

This insert added with the new ratchet leatherman came out with is going to be $!

[@JimmiCrackdKorn]

Nice video,great content and quite factual! Keep up the good 👍 work.

[@TDOLLA]

This is great and I am about to order it! Can you speak a little more on how you can change the tools around? what combinations of tools can be kept after installing this?

[@tokla853]

Did you make, or do you know some mods like this for the Free T4? The bit change doesn't fit for it, or does it?

[@tokla853]

What ist the width of the bit changer? If it is more than 5mm I think it wont fit into the T4.

[@95666]

I received the flat bit driver mod piece a week ago, between the spring pieces and tiny washers in the p4 i have not been able to get it put back together. Also no matter how i position them i cant get the scissors to spring open. I see now this must be a p2 bc i dont see the scissors.

[@ZapWizard]

If it is a P2 it only has two larger tools, the P4 has four large tools. If you totally take it apart it can be tricky to put back together, and the springs have to locking to the right spot over the magnet, and the pawl (lever arm) has to slot into the holes in the scales. If you tighten the screws too tight it may be hard to open.

[@Nichomachean5]

Um... you're a goddamn genius.

[@ToddSpringer444]

Ordered this one because my edc bottle opener count is already pretty high lol

[@titanite77]

Any chance of getting a "T shank blade" exchanger for the wave? Something to enable consolidating the saw and file spots so one could add better scissors. And while you're at it, can you make the new bigger scissors for the Wave - and an eyeglass bit that goes in the normal bit exchanger? P.S. - No pressure 😁

[@edwardwilliams6514]

I am looking at your Shapeways pages now, I cannot find the P4 holster as shown at 11:05. Am I blind?

[@ZapWizard]

Because there are so many possible combinations of features, it can be difficult to find the exact one your looking for. The one shown in the video is here: www.shapeways.com/product/X98RSQTWD/holster-with-bit-grips-for-free-p4?optionId=182573249&li=shops

[@matnakhla6392]

I have ordered the part, no play said to side, but there is a slight play up and down, is this normal ?

[@kirocha01]

Make some bit driver exchangers like these for the Leatherman’s squirt ps4 models. I will buy them in a second :) . Specially the one for smaller drivers!

[@itroom1615]

There is an adapter from 1/4 bits to 5/32 bits and it works perfectly. Wiha and aliexpress like markets have those things. It is much easier way to use little bits in standard bit holder.

[@jimpio2165]

I need one. Absolutely. How do I order one installed in my P4? I also need a diamond file installed please.

[@johnwomersley1964]

Have you ever thought of making a standard bit adapter for the wave?

[@jamesdubs8951]

Amazing job ..disregard comment when can we buy seen them on shapeways 😁✅

[@loner1512]

I have a question, Can I replace the ruler on P2 by package opener on Wingman?

[@ZapWizard]

The FREE series tool profile isn't the same as the Wingman. The parts would not be interchangeable.

[@neeko7878]

So, great products and great work. I am curious though as to how strong the material is that you are printing these parts with. I guess I’m not real sure what the process is called or what the exact material is. Assuming is a powder of sorts??? Very interesting

[@dodsonhaycattle]

Which finish would you say is the closest to the original stainless steel?

[@skylangit9259]

Where can i buy the holster like in your p2 & p4 for my leatherman wave and wingman with bit extender for my wave?

[@mozezfreek777]

Will both of your drivers fit on the P2? Instead of the knife and philips on one side, and instead of the ruler and can opener on the other side?

[@philipsmith4308]

Hi I'm from u.k I've purchased your mods really good ideas a precision screw driver bit wood be nice as I use mine p4 on a daily basis

[@rtskins905]

Hi, can this replace the Philips and the ruler? Instead of the Philips and flathead?

[@ZapWizard]

You can keep one of the thick implements by trading it for two thin ones. But no touch can’t remove one thick and one thin.

[@neknim]

Great design! Which would you say is a closer color match for the original tools, the silver or nickel? Thanks!

[@neknim]

@@ZapWizard Thank you, ordered!

[@PKDN215]

I just purchased the Free P2 and it’s great. The only thing i wish it had was a bit holder! I noticed there’s a flat bit holder that you show here as well as the 4mm bit holder. Which do you recommend? I don’t have either set of bits in my collection as I am (somewhat) new to the multi tool scene.

[@PKDN215]

@@ZapWizard Thanks so much for the reply! Appreciate your advice!

[@95666]

Can i send you my p4 and the flat bit holder? I already mess it up once, had to send it to leatherman to be put back together. Lol i really want the bit holder installed. Scared to take it apart!

[@ZapWizard]

I offer a custom install service here: zapwizard.com/products/custom-installation-service Use the code: RETURNCUSTOMER to save 10% off. (Valid for previous zapwizard.com customers, not Shapeways.com purchases)

[@ryanhammond8689]

Will the sheath extension holder hold a ratchet extension

[@ZapWizard]

That is coming soon. I am already wearing the prototype on my hip, and am waiting for a delivery of the final version.

[@adamgaweda440]

Hello sir can I ask you something: I'm planning to buy this bit holder for my p4, but would like to carry it with the longer version of the bit (the one that was made for LM MUT). Do you know if this will fit p4 when it's folded, I mean if it's not too long?

[@ZapWizard]

It won’t fit when folded, it will stick out the side by about 1/4”. I do have holster designs on my shop that have the bit extender holder on the side.

[@cubanforeda]

Hi, today I try to buy this product, but In my opinion $34 dollars to ship to Puerto Rico is to expensive for something to small, thanks

[@ZapWizard]

Sorry about that. Shapeways controls the shipping cost as these a made on demand. I don’t get a discount for bulk orders.

[@95666]

One more question, which pieces does this replace on the P4?

[@ZapWizard]

It replaces the philips and package opener (large flat head).

[@95666]

@@ZapWizard Ok, thanks for the speedy reply.

[@loner1512]

love to buy this part but I'm in Asia, may be hard to order that

[@ZapWizard]

Yes, Shapeways international shipping (outside the North America and the UK) is quite expensive: support.shapeways.com/hc/en-us/articles/360006412813-Shipping-time-costs

[@Theenemy38]

Hey Zap, have you thought about making a bit driver that just slips on the Philips head screwdriver rather that replacing it wholesale?

[@ZapWizard]

A few people have requested something like that. I just haven’t gotten around to designing it. Apparently if you have a grinder it is possible to modify the current screw driver to fit the ST300 bit extender.

[@4Thug2Life0]

That already exist look on esty

[@kentnorman5461]

I just thought of something for the leatherman free. I would change the saw for a beard comb.

[@kentnorman5461]

O wow! Sounds good. Just send my the cost

[@robertgorecki7125]

Can this be installed on the opposite side on the P4?

[@enriquecholico3189]

como se llaman esas cosas rojas que ayudan a sacar las navajas?

[@ZapWizard]

Thumb-tabs. zapwizard.com/collections/leatherman-free-p4/products/thumb-tabs-for-leatherman-mulitools

[@MrNCHSTENNIS]

will u make it for wave or surge？

[@goatsonapost]

@zapwizard is it possible to use the flat bit driver holder mod for the OHT?

[@ZapWizard]

No, the locking mechanism for the FREE series isn't share with any other Leatherman tools

[@frazer7276]

Amazing mod I’m going to order this for my p4 after Christmas, would you definitely recommend this over the 4mm driver? Kind regards

[@ZapWizard]

Yes. I recommend this over the 4mm, as it doesn't require magnets. It is usually ready to install out of the box.

[@charliejohnson1887]

Can u make one for the crunch

[@makbar59]

Could any of these bit drivers be adapted to the Squirt PS4?

[@ZapWizard]

Sorry, they won't fit any of the non FREE series models.

[@makbar59]

@@ZapWizard alright, thanks. any mods you recommend checking out for the Squirt?

[@ZapWizard]

@@makbar59 I am not sure, perhaps search Mulitool.org?

[@rogelioalvarez8068]

you buy the holster? excelent work!!

[@Theenemy38]

Really cool dood. Did you also make the holsters for your multitools as well?

[@ZapWizard]

I have designed holsters for a bunch of Leatherman tools. Each one can be configured to your personal taste. They can be found in my shop at: www.shapeways.com/shops/zapwizard

[@Theenemy38]

@@ZapWizard Thanks for the information. just saw the different things you've made for the leatherman free series and I love the thumbstuds. I'm going to try to order them for both my P4 and T2 if I get the chance to do so. Thanks again for the info and quick response.

[@MethodOverRide]

Do you sell the p2 or p4 with the mods already installed? I have repetitive stress injury and arthritis in my hands and I'm worried that I might use a hard time with the installation.

[@ZapWizard]

I am not a reseller, but I do offer a custom install service where you ship me your tools and I can install the mods. If you add it to your order I send the custom parts to myself, and a shipping label to you to send the tool. : zapwizard.com/collections/leatherman-tool-accessories/products/custom-installation-service

[@MethodOverRide]

@@ZapWizard perfect thank you!

[@nberry324]

I got this flat bit but I’m trying to order the clamp to hold my P4 like the guy is doing in video does anyone know what size that he is using I’m looking for them online and there is way to many to choose size hehe thanks

[@nberry324]

Joshua Driggs oh thank you hehe, also I ordered the flat bit and it’s awesome and can’t wait to put it in and already did the thumb tabs on 2 of my Leatherman tools

[@nberry324]

Finished installing my flat bit and it’s awesome, it’s is a perfect fit thanks again and can’t wait for more mods for the leatherman tools.

[@mguy808]

Fantastic mod. But I already have it on my Wave and my Surge. P2 an p4 are inferior tools, period.

[@TheTuneAce]

Magnets on a multi-tool are a no-go

[@naorhamagniv]

Wow!, great work! is this also compatible with the FREE K2?

[@ZapWizard]

It should be able to fit the FREE K2 by replacing the flat and Philips implements.

[@erbartlett]

can I buy a p2 with this already in it somewhere?

[@ZapWizard]

No. This mod is a user installed modification.

[@Ro-pg2lb]

Would this work on the t4?

[@ZapWizard]

It won't fit the FREE T4 as the flat and philips are in opposite sides, and the way the middle plastic is shaped. It does fit the T2 however.

[@GLopes45]

Very good work. Where can I buy the parts, please,???

[@ZapWizard]

zapwizard.com/collections/leatherman-free-p4/products/bit-holder-mod-for-leatherman-free-series

[@halfassed0047]

Any thumbstuds for the free t2 and t4?

[@felixcat2566]

Will this also work for the T4? Having a bit adaptor for that tool makes it much better in my opinion

[@michaelk487]

Cool

[@Genesislights]

Awesome!!

[@mokehoints]

Will this fit the K2?

[@ZapWizard]

The K2 has a Philips and flathead, so I believe it would fit.

[@jotero77]

WOW great fucken work! Leatherman should really be ashamed right about now.

[@adirbelleli1735]

Leatherman made an HUGE mistake for not doing it by themselves, it's the only reason any other tool with a Bit Driver is superior.

[@ms.m668]

中身取り替えられるの？パーツって売ってるのかな？

[@ms.m668]

@@ZapWizard Thank you. I want the red one on the knife.

[@95666]

Are you still making these bit holders?

[@ZapWizard]

Each one is made on demand by Shapeways and shipped to you directly.

[@95666]

@@ZapWizard Ok thanks for the quick reply.

[@jamesdubs8951]

When can we buy

[@alexsanchez58]

Where did you get it ?

[@alexsanchez58]

Forget that I’m just to see your description 👍🏼

[@rolandotorres9741]

Is he putting it on the p2 or p4

[@ZapWizard]

It fits a P2 or P4, replacing the Philips and package opener

[@TheOriginalLoca007]

Do you make them for the K4?

[@ZapWizard]

The flat bit holder is compatible with the K4.

[@TheOriginalLoca007]

@@ZapWizard do you think you could do an install video some time in the near future please?

[@ZapWizard]

@@TheOriginalLoca007 I don’t own a K4 but the steps should be similar. Remove the flat and philips bits and install the flat bit driver. You just shift the awl to one side or the other.

[@connorwesley8757]

Where can you buy these?

[@ZapWizard]

The store is here: www.shapeways.com/product/62T6D498Q/flat-bit-holder-mod-for-leatherman-free-p4-p2

[@AKChryslertech]

Will this fit the free t4 by chance?

[@AKChryslertech]

Thats what i was affraid of. I would be getting rid of the phillips on mine and also the file. I thought maybe if i could move stuff around to make it work but i also noticed the way the layout is, some stuff might not be able to be moved.

[@djangomaxfield]

Will this work on the other side too?

[@djangomaxfield]

I want an Allen key in addition to my screwdriver

[@ZapWizard]

@@djangomaxfield It will work on either side. If you wanted two on the FREE P4, it would take all the middle slots though.

[@djangomaxfield]

@@ZapWizard yeah but that’s awesome lol

[@djangomaxfield]

@@ZapWizard I work on guitars and want an Allen key in addition to my screwdrivers in my edc

[@aaronmallott8360]

Does this work with the K4 also?

[@aaronmallott8360]

@@ZapWizard I just purchased one. I'll let you know!

[@aaronmallott8360]

@@ZapWizard it fits, but i had to file one side down so it was flush with the base at the pivot. But it works!

[@s.jirayu5472]

I'm interested in this product, where can I order it?

[@ZapWizard]

www.shapeways.com/product/62T6D498Q/flat-bit-holder-mod-for-leatherman-free-p4-p2

[@gordonschiff3621]

It is cool product but get serious. I have a small Milwaukee bit driver that works a hundred times better than a stupid leatherman but holder.

[@rogaldorn605]

All i wanted was better scissors on the wave Amd leatherman published the mfking free series i really dont like them

[@skylangit9259]

Where can i buy the holster like in your p2 & p4 for my leatherman wave and wingman with bit extender for my wave?

[@FInixNOver]

Will it work with the K series?

[@felixcat2566]

Joshua Driggs will the T series get one as well? I really need one on the T4