Flex programmer, another functionality that makes it special ! Another reason that makes you want it

[@abreiz1]

Like other mentioned. Master of his craft, no bulshit. Honest information for users. Keep it up, mate.

[@YOYODiagnostic]

@@abreiz1 👍

[@PovilasKuznecovas]

@@YOYODiagnostic what if car exported and poor me need to work on it?

[@YOYODiagnostic]

@@PovilasKuznecovas write the original dump on boot mode and car ist unlocked again.

[@georgiosgeorgakis4202]

Hello YOYO great soloution with Flex! Very good explanation! Greets from Germany

[@bigo975]

U make good videos , straight too the point!

[@YOYODiagnostic]

@@bigo975 👍

[@balazsbanai5930]

Hello! Flex is good programmer,but too expensive for me.Can I ask you about Hexprog2? I hesitate for Flex,Hexprog2 or Autotuner

[@YOYODiagnostic]

@@balazsbanai5930 i will go for every moment for Flex. Only CMD is stronger than Flex. And also FG Tech is a good Programmer

[@markmcmichael5595]

I have hexprog. Very good for the price, but doesn’t read many older ecu’s

[@kari-mattiloukiainen6825]

Will the original ISTA and ICOM still be able to update the ECU? Can you update with Esys or any other software? For example, if the BMW EGR campaign has not been done, the ECU is locked and you have no idea who did it?

[@YOYODiagnostic]

@@kari-mattiloukiainen6825 yes the ista can make the Update

[@nelsonpacheco5779]

Hi friend I’m big fan yur videos what is the best machine to read tcu without dissembling the ecu on a meg17.9.12 Kia Rio

[@YOYODiagnostic]

@@nelsonpacheco5779 Hi, you don't have a best tool, are many good tools but depends what is you budget.

[@mynty2864]

Hello my friend. You have choose int flash and then int eeprom. Why you have not choose full backup ?

[@YOYODiagnostic]

@@mynty2864 Hi. You can take both ways 👍

[@medhamoud4492]

Thanks for the video

[@YOYODiagnostic]

@@medhamoud4492 👍

[@vladalexandrucojoc921]

Flex rocks 🤘🤘🤘 Thanks for sharing

[@YOYODiagnostic]

@@vladalexandrucojoc921 👍

[@kovac3917]

Hello!I bought a kt200, what is your opinion about it and is it similar to the flex?

[@YOYODiagnostic]

@@kovac3917 Hi is similar but only 60%. KT 200 is a clone,you cannot compare it with an original tool

[@yucelaktas3626]

Yoyo. Can a locked ECU be unlocked? For example locked with another brand and unlocked with flex? And what if you lock it how do yoy unlock it?

[@YOYODiagnostic]

@@yucelaktas3626 yes , I will make a separate video because I have many subscribers asking.

[@Arjun-vq5oy]

Where are you located bro ?

[@YOYODiagnostic]

@@Arjun-vq5oy this is not important, if this Chanel helps you this is most important.

[@Arjun-vq5oy]

In Europe ? I am in Norway, if I need to send you anything how can this happen.

[@YOYODiagnostic]

@@Arjun-vq5oy Thanks, but I don't have time for extra repairs, what I have it's to much.

[@Cristian.Motors]

Hi Yoyo. To restore in Boot mode, if we don't have the password, we will have to use the original file that is the one that was initially read? Or is it ok with a virgin file (VR) requested from support? Thank you. Good job.

[@domytis]

Boot mode read write

[@branchprediction9923]

Hello bro, Im beginner but i want to start doing some tuning myself. I dont want to pay more than 1000 euros for now and i have a opel insignia 2.0 turbo diesel (EDC17C59) that i will use for testing and training. I saw ur video about the xhorse multi prog, im thinking of buying that one to start. Bro what do u think? thx for ur videos btw, u really help us a lot.

[@YOYODiagnostic]

@@branchprediction9923 Hi, multiprog is not 100 % good for beginners, it cannot do checksum correction. I advised you to go for FC200, this can do checksum correction.

[@Korstee]

@@YOYODiagnostic But FC200 is a dead tool after one year without a subscription. Or have they reversed their policy?

[@gauravtewari233]

This is really awesome, Great feature to know. Can this ECU is unlocked again in boot, if one has the password?

[@YOYODiagnostic]

@@gauravtewari233 yes 👍

[@levanimgebrishvili4780]

what if they put new ecu, tune it, destroy the engine then put oginial back and ask for warranty?

[@YOYODiagnostic]

@@levanimgebrishvili4780 if he can't copy it, it means he can't be cloned. To buy an ECU and make it stage 1 + Immo off, I don't think that financially anyone will be happy. It is also possible what you say and I agree with what you say, but when you buy an ecu for a car after 2012 it costs around 350-550 euros and if you also calculate a stage 1 and Immo off, the amount is close to 1000 euros . how many do you think they want to give this money.

[@nofaltech]

hi how Can this ECU is unlocked again in boot, if one has the password? If possible, explain the video

[@YOYODiagnostic]

@@nofaltech I said in the video but you didn't pay attention. you read and write it in Boot Mode.

[@bobyy1983]

Man, pui alt calculator si tot poti sa ii pacalesti... daca vrei

[@simplemechanics246]

Dream only...kess3 mop the floor with your toy

[@YOYODiagnostic]

@@simplemechanics246 I've heard this before. but anyway dreaming costs nothing, instead kess v3 which costs as much as a CMD does not even have half of its performance

[@alaanaggar2892]

My friend instead of buying this flax crap. And paying a high price. I can buy a VF2 flasher for the same price as flax but it is stronger, more accurate, more durable and more reliable.

[@YOYODiagnostic]

@@alaanaggar2892 and after 2 years the company closes and the programmer is given to the children to play with. you no longer have access to the server, goodbye functionality. There are still 3 big companies that closed down and the customers were left with tears in their eyes.

[@irfankhalifa5647]

How is flex crap, it does full reads and has very good coverage... Slave is cheaper if you can't afford master. Slave lets you do full reads and writes for swapping ECU's without sending to master. They have good support and that's what matters. How is the support with vf2 flasher?

[@mahmoudhantouli5434]

Hi i have question how about the Volkswagen MED17.5 when they show OTP how you can fix it

[@YOYODiagnostic]

@@mahmoudhantouli5434 👍

[@jamesgarrard4361]

Hi YOYO another great video the tool looks great the only problem for me is a master version is a lot of money for us guys who dont get so much work in small towns ,i apreciate the fact you can offer the service to dealers but it still a large amount of money especialy if you have other genuine tools like kess3. but thanks anyway great contenet as always regards Jim.

[@YOYODiagnostic]

@@jamesgarrard4361 thanks for your support 👍