🔶 Flipper Zero Unleashed Marauder Wi-Fi Deauther

[@drax6108]

If you guys connect over 2.4ghz heres a little instruction on how to prevent this: Go into your router settings and search for your network settings. If supported, switch from WPA2 to WPA3 or WPA2/WPA3. Turn on the Management Frame Protection. The packages will not be accepted anymore and you will not be disturbed by skids. Also, remember that this option might slower your internet slightly (about 10% slower).

[@ianbos3581]

And you need to have a relatively new router which most people don't have.

[@digitalphoenix72]

Thanks for this comment! Just started attacking my own systems to find their weaknesses, and luckily I have a router that's only a few months old, so you may have provided at least one of my solutions I hope to find in my process.

[@drax6108]

@@digitalphoenix72 No problem, I‘m glad I could provide you with a potential solution. One question. If your router is a few months old, don‘t you use 5ghz?

[@djaketech4460]

Crazy how there has not been a 5ghz version of the esp32

[@shyrym]

when i click scanap on mine it just says "Press BACK to send stopscan"

[@lynxflop]

where you bougth it?

[@shyrym]

@@lynxflop joom. Only place I could for Canada

[@ok_140]

same

[@jakewilliams4285]

Same

[@Badcakee]

Same

[@jonaslarsen2703]

So what exactly does this do?

[@S4vvyos]

It’s a portable penetration testing device, the attack he’s simulating kicks all devices off the network.

[@KilianP-my3oe]

What he did on the screen did a wifi death attack it only works on certain wifis but it in theory kick people from the wifi

[@plus55-BR]

Failure to flash marauder firmware on flipper dev wifi board. Where did you get the code?

[@X_silent1]

Just use rogue master firmware this works

[@NovashadowEchoswift]

wow thank!!!

[@elsanto7551]

Sorry, could you help me to flash an original board like you have in the video?

[@Golf4org]

Does this help? kzbin.infooey6Gr5yF7w?feature=share

[@elsanto7551]

Gracias!

[@OneAndOnlyZekePolaris]

Can someone tell me what the lights on the board mean in each color? Also you should blur out everyone's WiFi here. You don't need to have the Flipper off first btw. Also I can't read that language. What means von? I have tested this with all firmwares and it does not have to be "unleashed". They all can do this.

[@digitalphoenix72]

Did you add anything to the dev board? My understanding is the deauth could only be successfully ran with a different chip than the esp32 (esp8266?). How were you able to see the command prompt? Maybe I'm using it wrong, but I can't seem to get the attack to run, even when selected.

[@digitalphoenix72]

I finally figured out how to use the settings properly. Rather bothersome (got it to learn pen-testing as a hobby, and to secure myself), that I very easily shut down all the wifi cameras in my house (at least the cloud function) with a button press. Ive also noticed that every IOT device I've ever seen runs on 2.4g, that can have significant consequences. I'm just glad we have multiple home security methods, some much stronger than an easily blocked radio frequency. Thanks for putting out the video! I've been messing with my flipper for days and only now after your video, can I finally attack my own network and start looking at solutions.

[@AndrewGaule]

How did you shut down all your WiFi Cameras from cloud that would be very handy for me.

[@malcolmr8348]

Are these 5ghz capable?

[@Golf4org]

No

[@malcolmr8348]

@@Golf4org good :) i only run a 5ghz network at my site.

[@nickwaah2702]

The music info, please?

[@IACCAXPHONE10]

So when attacked you can not connect to the said?

[@Golf4org]

Sometimes it connects but it can not hold the connection.

[@OneAndOnlyZekePolaris]

Did you turn on the 5V on GPIO in the settings of GPIO?

[@diegojuarez4208]

Im having problems with doing deauth attacks on my network. I don’t have problems scanning or selecting the ap. When I check the lists it says: (1)(ch6) name of network (84) When I see everyone use it they don’t have the channel number on the ap list. Do you think that Is why it’s not working?

[@Just_lift_anyone]

Can you select multiple targets to sequence one at a time?

[@borofergie]

Yes. With commas separating them

[@Pwnagotchi-0]

Hell yea

[@UfukKay]

Meine Fritzbox zeigt sich mehrmals. Habe alle 4 selected aber alles bleibt gefühlt im wlan. Auf dem TV KZbin laufen lassen geht. Blink cam feiert ein aber auch Handy bleibt im wlan. Was mache ich falsch ?

[@Zeitgeschichte1]

Hallo kay, das problem wird sehr wahrscheinlich sein dass die heutigen Fritzboxen 2.4ghz sowie 5ghz sind, die deauther Attacke kann nur 2.4ghz wlan Netze stören somit ist eine FRITZ!Box mehr oder weniger immun dagegen, ich habe es bei mir mehrmals getestet und nur die Geräte die am äußeren Ende des Empfangs waren wurden von wlan abgemeldet, die Fire Tv sticks wurden ebenfalls abgemeldet da diese auch nur 2.4ghz haben.

[@UfukKay]

@@Zeitgeschichte1 ja du hast recht, hatte den Effekt mir mit Kamaras oder meine Nanoleaf weil die mit 2,4 Funken. Warum kann man es nicht bei 5 ghz machen ?

[@konradwerner4134]

Cant flash marauder 😢...pc wont let me ...think i got a bad devboard???

[@Golf4org]

You got any error messages? Run the updater as Administrator.

[@konradwerner4134]

@@Golf4org when i run it normal ....it says something about wmic ...when run as admin it says esptool is not installed but it is . Its in the folder with the flasher bat 🤷‍♂️. Ima do a factory reset and my pc and start from scrach today . Hopefully it works 🤞

[@urbexingTss]

​@@konradwerner4134why did you factory reset💀

[@konradwerner4134]

@@urbexingTss i did ... I install a fresh windows from USB , it worked 🤷

[@PlugNoOutlet]

Should I still use 2.0.1-rc1?

[@laranja3]

Does it work with 5GHz?

[@laranja3]

Do you know one that works with 5GHz?

[@Golf4org]

No, does not work.

[@Resumen.España]

If the scan freezy and dont show anything in prompt?

[@MatteBlk300C5.7]

when i try this, everything stays hooked up still

[@CacheTheKash]

Same

[@ipwnxdemonzz4223]

How can I stop my ring door bell from working

[@Golf4org]

Deauthentication could work on 2.4 GHz WiFi.

[@KingLord-yx2du]

hi, kannst du ein video teilen in dem du zeigst wie ich die app auf dem flipper kopieren kann?

[@Golf4org]

Wie meinst du die App kopieren?

[@logymoto]

Should I connect my Flipper to my pc?

[@retr0522]

No,only the developer board

[@hofertyp]

Nice any Gerber file?

[@Ka-Os_]

it don’t seem working pls help

[@Jorge-qb9ce]

Do u have turn on 5v ?

[@KingE6075]

No

[@hebermix]

can i do this with 5G ?

[@davemorgan853]

nop

[@TechTokOffical]

What exactly are u doing here?

[@drcyb3r]

To describe it very simple: Scanning for all nearby WiFi access points, selecting one and sending "deauth" packages to every device connected to that network. It uses a function in the wifi protocol that can kick people from WiFi networks. That function is disabled on more modern networks. So for example it won't work on any network you need to use a username and password for.

[@--Grimm]

​@@drcyb3r so would it work for things like wifi cameras then?

[@drcyb3r]

@@--Grimm yes, but they often also record locally to prevent such an attack.

[@Sackguy]

Music?

[@eathan_w]

Can you do it a little slower please

[@MaxKrachim]

Du heißt Julian und hast einw FritzBox 😂 (in der nähe) Alles same bei mir lol

[@beststorytime4325]

Will Maruader it flash on Windows 7?

[@jorgethecoach]

What does this do??

[@Multiniggo]

Funktioniert bei mir irgendwie nicht 😀🤷🏻‍♂️ das einzige was funktioniert ist rickroll

[@Golf4org]

Hast du ein 5 GHz WiFi?

[@paulybequickbenimble874]

We're would be best to this upgrade product, ...

[@chriswollinger6702]

Xtreme Firmware is a way better!

[@zoltan1953]

Speed the video up a little more. I can still kinda make out some of the stuff you're doing. It needs to be faster so that everything is just a blur with generic techno music playing over it.

[@OBZRV82]

This is for show, not learning purposes. So you better not learn anything..😅

[@moviezreelzzz4624]

Useless. We cant get the password Just deauth

[@kunle4sanya]

How 😂😂😂

[@yosup89]

Hacker

[@JoseMoop]

Bro thinks grabbing handshakes= hacking a wifi password XD just get an alfa adapter learn airmon aircrack hashcat hell eben go the skid route and use wifite u will have a waaay better time actially getting the password instead of a handshake you habe to crack with hashcat 😂

[@Golf4org]

@@JoseMoop I never said I was hacking a password.