Floor and Insulation DIY Kei Truck Micro Camper Build #3

Рет қаралды 1,826

Күн бұрын

Пікірлер: 39

@CosyCottageCamper 3 ай бұрын

HELP - I am trying to find electric actuators instead of using hand crank jacks for the camper legs so it can slide on and off quicker. I think this would be easier to operate by myself also. Any suggestions on how I could make this idea work?

@philjohnston007 3 ай бұрын

Place one on each corner of the camper body with some frame work (legs) say, 300mm+ from the ground (to allow ground clearance whilst traveling) and attach an actuator to each of the four corners with a reach (stroke) > than the ground clearance. The actuators would need to be of appropriate spec for the weight of the camper. Once the camper is raised off the trucks tray, move the truck forward, then lower the actuators so the camper is resting on the four frame extension legs to which the actuators are mounted. This would take the pressure off the actuators whilst the camper is being stored.

@CosyCottageCamper 3 ай бұрын

@philjohnston007 Thanks Phil. That's a great way to do it. Taking the weight off the actuators is also very smart, so the load isn't putting too much pressure on them whilst it's stored.

@BootUpwithBaysharp Ай бұрын

Electric trailer tongue jacks are cheap and strong. I've always thought about wiring 4 together for unified control up and down. If they're in the way, you could put them on swivel mounts or quick releases when not in use.

@CosyCottageCamper Ай бұрын

@@BootUpwithBaysharp Thanks so much for your comment. I ended up buying 4 electric linear actuators, which I have been welding brackets for. I have yet to wire them together to make them work at once, but fingers crossed I can figure it out. I needed the legs to take the camper down to the ground, so I can slide it under my garage door for easy storing. Next video is half filmed ready to go, I just need them to work together now! Thanks for watching!

@shidolab 2 ай бұрын

素敵な家になりそうですね！完成楽しみにしてます👍

@CosyCottageCamper 2 ай бұрын

@@shidolab 私のビデオもご覧いただきありがとうございます。あなたは私にとって大きなインスピレーションでした。私の家もあなたの家と同じくらい素晴らしいものになることを願っています。

@uselessfuck 3 ай бұрын

Well done Tam! It's coming along beautifully and you're doing an amazing job! Well done too Trent 😂. Always remeber this: "If it doesn't fit, force it. If it breaks, it was meant to be replaced anyway." 😂😂😂

@CosyCottageCamper 2 ай бұрын

Thanks Chris 🙂 Such a fun project to work on!

@masamasa545 3 ай бұрын

日本から応援しています♡ 貴方のペースで無理をしないで楽しんで下さい。私も幸せ♡ ガレージの屋根とK-trackの屋根が同じで可愛😊

@CosyCottageCamper 3 ай бұрын

@@masamasa545 ありがとうございます。そうですね、何事も時間がかかりますね。特に私は初心者なので。完成したキャンピングカーを皆さんにお見せするのが楽しみです。

@ノボル-e9f 3 ай бұрын

参考になります。👍😊😊😀

@CosyCottageCamper 3 ай бұрын

@user-rq4ek4hj9y Thank you. Yes I hope it will help as we can have very hot summers.

@Sky.H265 3 ай бұрын

noooo stop! i wanna do this so bad. Cant wait to see it finished!

@CosyCottageCamper 3 ай бұрын

@Sky.H265 haha thanks for watching my video 😀 The camper is so tiny, it's ridiculous but awesome at the same time.

@Sky.H265 3 ай бұрын

@@CosyCottageCamper the size is perfect in my opinion!

@CosyCottageCamper 3 ай бұрын

@Sky.H265 I just fit lying down and will be having a sink, fridge, cooker and chemical toilet hidden away just in case for emergencies.

@Sky.H265 3 ай бұрын

@@CosyCottageCamper perfect fit! And love the sound of the setup gonna be so cozy!

@taniahartley9799 3 ай бұрын

Its coming along well it will be nice and cosy thats for sure. I love that u have insulated every bit of it

@CosyCottageCamper 3 ай бұрын

@taniahartley9799 Thanks, trying to keep it warm when in winter and that little but cooler when it's sizzling, and I'm melting inside, haha.

@taka9351 3 ай бұрын

家らしくなってきました😊 全ての工程が楽しみです。

@CosyCottageCamper 3 ай бұрын

ありがとう。キャンピングカーが完成して各地を旅するのがとても楽しみです 🙂🚚

@carlosvassel Ай бұрын

Excelente video gracias

@CosyCottageCamper Ай бұрын

@@carlosvassel Thanks for watching.

@xploradora8099 Ай бұрын

How interesting watch this. Subscribing to see how it finish’s

@CosyCottageCamper Ай бұрын

@xploradora8099 Thanks for watching. I'm happy with the build so far. Exciting seeing it all coming together.

@interested_in_things 3 ай бұрын

Coming along great. How does the aluminium frame fasten to the truck?

@CosyCottageCamper 3 ай бұрын

@interested_in_things Thank you! I used the original tray sides mounting brackets to then fasten new aluminium brackets into the same holes being held with bolts. I will show in a future video 😊

@interested_in_things 3 ай бұрын

@@CosyCottageCamper ah thanks, thought I must have missed it.

@jonathanbmBen-Menachem 3 ай бұрын

Question: How many gears does the suzuki carry 2020 have? 3,4,5? Beautiful building. It looks much more spacious than 2x1.48m. Beautiful work!

@CosyCottageCamper 3 ай бұрын

Hi Jonathan, thanks for watching and your kind comment! The Suzuki is a 3 speed Auto. The 2024 models have 4 gears so in the future I may upgrade the Suzuki to a 4WD with 4 gears. Will see how my 2020 version travels in the meantime.

@jonathanbmBen-Menachem 3 ай бұрын

@@CosyCottageCampermany thanks for the prompt reply.

@つよしみき 3 ай бұрын

標準ではリーフスプリングは3枚ですが　アクセサリーで1枚追加で4枚仕様( 荷台の重さ対策 )にできるみたいですがあなたの軽トラは4枚ですか？😮

@CosyCottageCamper 3 ай бұрын

Thanks for watching. I am not sure; I will need to check the springs. Thanks for the suggestion to add another accessory spring to counter the weight load. That will be very handy indeed! 🙂

@CosyCottageCamper 3 ай бұрын

ご覧いただきありがとうございます。よくわかりません;スプリングをチェックする必要があります。重量負荷に対抗するために別のアクセサリスプリングを追加するという提案をありがとう。それは本当に便利です！

@つよしみき 3 ай бұрын

@@CosyCottageCamper メーカーの純正アクセサリー部品です。　わたしは軽トラ購入の時に　ディラーで4枚仕様にしてもらいました

@CosyCottageCamper 3 ай бұрын

@@つよしみき Oh right. That was good thinking and would definitely help! I am trying to use lightweight materials; however I know it will soon all add up in weight. そうそう。それは良い考えであり、間違いなく役立ちます!軽量の素材を使用しようとしています。しかし、すぐにすべての重量が重くなることはわかっています。