Floor and Wall Operation | NX Manufacturing | NX CAM

This video explains about how to use "Floor and Wall" Operation in NX Manufacturing module.
Definition : Cuts Floors and Walls
Select floor and/or Wall Geometry. The material to be removed is determined by the cut area floor and the blank thickness.
Recommended for basis face milling of planer face on prismatic parts. This operation replaces the FACE_MILLING_AREA operation.
Link for 3D model:
drive.google.c...
#NX #Manufacturing #CNCProgrammingClub #NXCAM #FLOORANDWALL

[@ajaygadariya2874]

Great in depth content with clear understanding and demonstration of variety of options. 👌

[@vivek_pateI]

Glad it helped!

[@AmanDattani]

Very useful Nicely explained sir

[@vivek_pateI]

Thanks and welcome. Keep Watching!!

[@aryachangela9439]

Crisp & clear content..

[@rahulpitroda350]

Really Helpfull..

[@vivek_pateI]

Glad it helped

[@rohitninama9007]

Thank you

[@vivek_pateI]

You're welcome

[@burhanuddinvohra3724]

👍👍👍

[@arunchourasiya1692]

Hii sir please make more videos on manufacturing

[@vivek_pateI]

We will try

[@surendranachan6644]

👌👌👏😄

[@vivek_pateI]

Glad you liked it!

[@nickgajjar2848]

Sir Please Arrange Workshop On NX

[@vivek_pateI]

We will arrange it.

[@hetavsamani8646]

Sir after I did the rough milling operation, as you have shown in the vedio some material is still remaining for removing during finish milling. But when I did the in my computer it's not happening, no extra material is left after rough milling, all parameters are same, what can be the reason?

[@vivek_pateI]

You must have selected Walls along with the floor. Just select the floor and verify it.

[@hetavsamani8646]

@@vivek_pateI yeap worked very well

[@surendranachan6644]

Goto cut parameters then click on the stock and make all value zero

[@mdasim8915]

How to make a 2d program for agnle face/profile? Can you explain? In g41, g42. Please🙏

[@vivek_pateI]

I'll prepare a video and share it.

[@mdasim8915]

@@vivek_pateI thanks 👍

[@TamrkarAnupam93]

Sir how to genrate progrmme in text formate please explain

[@vivek_pateI]

Click on Post Process > Select Mill 3 Axis (From Post Processor) > write "MPF" in File Extension>Select Unit as Metric/Inch > Click apply and Program will be generated. Delete N20; N30; N50 Lines once program is generated. Load program on Machine and verify it.

[@pokednaful]

Sir. What is the different of "ROUGH_MILL" with "FINISH_MILL"?

[@vivek_pateI]

You got three options, 1. Rough Mill - It keep 1 mm material on adjacent sides. (Finishing allowance of 1 mm) 2. Semi finish - It keep 0.3 mm material on sides. (Finishing allowance of 0.3 mm) 3. Finish Mill - It removes all material from selected faces. (No allowance for finishing.)

[@pokednaful]

@@vivek_pateI Hmmm. But when i try on NX 1926, i see no difference between rough, semifinal, and final. Or i must set the "Floor Final Stock & Wall Final Stock" manually?

[@vivek_pateI]

Please share photo graph of machined edges for rough cut and finish cut on [e-mail]

[@pokednaful]

@@vivek_pateI Okay Sir, please check your email. Thankyou

[@toshifvlogs3152]

How to measure cycle time ..any option

[@vivek_pateI]

Goto Simulate machine and play simulation. You will be displayed machining time. Just make sure that you have specified feeds and speeds. If you have multiple operation then select multiple operation and run simulation. Total machining time will be displayed.