Floor Scrubbing Detail : Hotel Room -ல இப்படியெல்லாம் பண்ணுவாங்களா | Single Disc Floor Scrubbing

#clean #housekeeping #floorscrubbing #floorcleaning #floorcleanerfillingmachines #scrubbing
Greeting From Laundry Secret
In this video we discuss about To scrub a hotel floor with a machine
you will need:
A floor scrubbing machine
A cleaning solution
Water
Wet floor signs
Caution tape
Instructions:
Prepare the area. Move all furniture and other obstructions out of the way. Put up wet floor signs and caution tape to warn people of the slippery surface.
Fill the machine with water and cleaning solution. Follow the manufacturer's instructions on how to do this.
Attach the scrubbing pad to the machine.
Start the machine and move it slowly over the floor in a zigzag pattern. Overlap each pass slightly to ensure that the entire floor is scrubbed.
Empty the dirty water from the machine and refill it with clean water.
Rinse the floor by moving the machine over it slowly in a zigzag pattern again.
Empty the dirty water from the machine and let the floor dry completely before moving the furniture back into place.
Here are some additional tips for scrubbing a hotel floor with a machine:
Use a cleaning solution that is appropriate for the type of flooring you are scrubbing.
Be careful not to over-scrub the floor, as this can damage it.
If you are scrubbing a large area, it may be helpful to divide it into smaller sections.
Be sure to rinse the floor thoroughly after scrubbing to remove all of the cleaning solution.
Allow the floor to dry completely before allowing people to walk on it.
Safety tips:
Wear appropriate safety gear, such as gloves and goggles, when operating a floor scrubbing machine.
Be careful not to trip over the electrical cord.
Be aware of your surroundings and avoid running into people or furniture.
Do not use a floor scrubbing machine on wet or slippery surfaces.To scrub a hotel floor with a machine, you will need:
A floor scrubbing machine
A cleaning solution
Water
Wet floor signs
Caution tape
Instructions:
Prepare the area. Move all furniture and other obstructions out of the way. Put up wet floor signs and caution tape to warn people of the slippery surface.
Fill the machine with water and cleaning solution. Follow the manufacturer's instructions on how to do this.
Attach the scrubbing pad to the machine.
Start the machine and move it slowly over the floor in a zigzag pattern. Overlap each pass slightly to ensure that the entire floor is scrubbed.
Empty the dirty water from the machine and refill it with clean water.
Rinse the floor by moving the machine over it slowly in a zigzag pattern again.
Empty the dirty water from the machine and let the floor dry completely before moving the furniture back into place.
Here are some additional tips for scrubbing a hotel floor with a machine:
Use a cleaning solution that is appropriate for the type of flooring you are scrubbing.
Be careful not to over-scrub the floor, as this can damage it.
If you are scrubbing a large area, it may be helpful to divide it into smaller sections.
Be sure to rinse the floor thoroughly after scrubbing to remove all of the cleaning solution.
Allow the floor to dry completely before allowing people to walk on it.
Safety tips:
Wear appropriate safety gear, such as gloves and goggles, when operating a floor scrubbing machine.
Be careful not to trip over the electrical cord.
Be aware of your surroundings and avoid running into people or furniture.
Do not use a floor scrubbing machine on wet or slippery surfaces.
------------------------------------------------------------------------------------------------------------
Follow on KZbin - / @laundrysecret
Follow on Facebook - / laundrysecret
Follow on Instagram - / m.umarali1

[@Mr-ettana-tn-65]

How to get pollution certificate for laundary business

[@LaundrySecret]

Pollution control board