Flow rate calculation from given line size

[@Breakingnews23]

It is helpful. Nice explanation. Thank you🙏🌹..

[@rahuljagdale19]

Thank you Professor for guiding and teaching.

[@26prathameshkatkar67]

Is the same process for steam also or another formula ?

[@atultyagi1143]

What should be velocity for effluent of CETP (Common Effluent Treatment Plant )?

[@NitinDahatonde]

There are Thumb rules for velocity, for example for water 2 to 3 m/s. For air 20m/s. For steam 22 to 30 m/s. For viscus product it may be different. If you want to calculate std velocity for typical product then you can do reverse engineering for any working plant.

[@junaidhaleemroonjho8487]

Calculating velocity is another headache. Can you plz let us know if suppose the milk is replaced with other fluids then what will be the velocity of it ? Should we calculate it, or is it a standard value of relevant fluids ? Suppose I need to calculate the discharge of water of over head water tank, is this formula is applicable for this situation ? If yes then what about velocity how should I calculate it ?

[@NitinDahatonde]

There are Thumb rules for velocity, for example for water 2 to 3 m/s. For air 20m/s. For steam 22 to 30 m/s. For viscus product it may be different. If you want to calculate std velocity for typical product then you can do reverse engineering for any working plant.

[@MayankVerma-gv4eq]

Sir. 0023×3600 =8.28 so why you 10 m3/hr consider.

[@NitinDahatonde]

10 m3/hr is our calculated answer.

[@Srk7028]

is velocity constant at 1.5 m/s ?

[@NitinDahatonde]

@@Srk7028 : 1.5 m/s will be as per guidelines. In food industry 1.5 m/s is recommended. For water it can be considered 1.5 to 2.5 m/s. For low pressure steam it can be 25m/s.

[@Srk7028]

@@NitinDahatonde is it depends on pressure of fluid stream ?

[@NitinDahatonde]

@@Srk7028 : Yes. Depends on pressure as well

[@nathanielhawthorne2206]

Sir , please make video for steam consumption required for heating particular amount of milk uppto 83 degree celcius

[@NitinDahatonde]

Sure.. I will prepare calculation for steam consumption for heating of milk or water..

[@NitinDahatonde]

I have uploaded steam calculation video , check it and if you have any question please ask me.

[@Danny-oo4df]

Velocity for effluent?

[@chandrakantpatil6286]

How to get velocity of liquid

[@NitinDahatonde]

In industry we have thumb rule and guideline for velocity. For example : For water 2 to 3 m/sec it is recommended.

[@mamooransari526]

Sir ye π/4 m 4 kaise aaya. Aisa kon sa formula hai?

[@fazilhamza1476]

Area of circular cross section is pi*(R)^2 = pi*(ID/2)^2= ((pi*(ID)^2)/4 ....here R=Inner Diameter/2

[@mohamadhasanpour4762]

😉😉😉😉👍👍👍

[@8000480507]

Video is not clear visibly

[@MD_Sharif.Hossen]

V=?

[@NitinDahatonde]

It is velocity