Flowzone Cyclone 2.5 unboxing, plus custom spray tips

[@ultragreenllc]

Flowzone has a special on their 2.5 gallon Microboost 2.0, $90 includes battery, charger, and inline spray handle. I just bought two for applying insecticides.

[@dskim5848]

Flowzone best electric sprayer.... others crap out in no time. Built well great customer support. Always improving their products.

[@isaacchavezjr5556]

Thank you Paul Because of watching you I have improved my lawn care service immensely. Also because of you I have purchased several FlowZone as well. Just on Friday I picked up a new client which is paying $600 a month for service. From what I’ve learned from you and others but mostly you I was able to convince him that I knew what I was doing.😂

[@PaulsPrimeCuts]

Yep just say some big words and your golden

[@joshbaker1639]

I was looking for a good review on the cyclone, everyone seems to have the typhoon. Thank you for this!!!

[@PaulsPrimeCuts]

Well it was a review… I don’t know how good a review. The flowzone sprayers are awesome you can’t go wrong by getting one

[@shawnsturgeon1014]

Sparta! If the arrows block out the sun then we will fight in the shade!

[@geneduclos4003]

Hey Paul, I purchased the Typhoon 2 two years ago and love it. The only issue I have with it, and it doesn't look like they corrected it yet even on the Cyclone 2.5 is the shoulder straps are too wide at the top. So it has a tendency to drop off my shoulder. Now I crisscross the shoulder straps at the top, which provides much more stability when bending over to pick fallen branches. Like your video... a great product. Thanks.

[@PaulsPrimeCuts]

Maybe you should start pumping iron 😂

[@chadtaylor5930]

Thank you for this video, I have purchased those exact custom tips from a local (Reidsville) NC KZbinr and now I will make my own 👍🏻🙏🏻🙌🏻🇺🇸

[@PaulsPrimeCuts]

The parts ain’t cheap

[@lbever13]

I have the same exact sprayer and my only complaint has been that I cannot use my 10 psi Teejet diaphragm check valves with it. Whenever the tank gets low, it will suck air into the line and the diaphragm valve won't allow the pump to re-prime. Consequently, I have to either unscrew the diaphragm valve or disconnect the wand to re-prime the pump which is a bit of a pain. I've found that running an "all in one" strainer check valve that opens at a lower pressure alleviates the problem and doesn't leave me with a leaky tip. At any rate, keep up the great content! I've gained a tremendous amount of practical knowledge from watching your channel.

[@PaulsPrimeCuts]

I have some tips with pressure caps too and have the exact same issues

[@DjRamAuDie]

im new. just ordered typhoon..what strainer check valve psi did you get ? I see theres ones that open at 2 .. 5.. 10 psi . is the strainer check valve still a good set up. thanks !

[@PaulsPrimeCuts]

@@DjRamAuDie it’s probably not 100% necessary

[@alexcampbell5218]

Man I love your videos. Not many people are as good as you and still funny!

[@PaulsPrimeCuts]

Thanks for watching this crap😂 I’m glad you got something out of it!

[@michaelmerck7576]

That last tip looks like it would be good a pest control tip for a heavily mulched area because it will penetrate the mulch and and hit the soil

[@lonnielove01]

Thanks for the review help me understand how to assemble it…Thanks!👍

[@brandonhyden9454]

A lawn vest? Flowzone is no joke. Amazing sprayers fo sho.

[@PaulsPrimeCuts]

A great tool

[@Velvethamma]

Those new straps and back pad look way better than the dollar store ones the original ones came with. I might have to upgrade although my old flow zone is still going strong

[@PaulsPrimeCuts]

Yeah it’s got some nice upgrades

[@wayneessar7489]

"What we do in life, echoes in eternity!"..... at least until the weekend.

[@johnnelwhite]

Just placed my order for a cyclone from gci. I was going to get the 2.5 gallon cause my yard is 2k sq ft but the price difference is so small. I'm so tired of using my 2 gallon hand pump sprayer.

[@PaulsPrimeCuts]

Nice!

[@SuperDagbo]

Glad to see your a N.C.S.U. fan also.

[@kdog044]

I think the connector should be ST2F2-S not ST2M2-S as it's a female connector, not male.

[@Over_Taxed_USA]

GCI Turf has these and the Typhoon in stock (currently)

[@lawncaremonster1024]

I always thought you use the flood jet tip to were it sprays down and not out 🙈

[@michaelherring_]

Mine will not prime itself also. I find that I have to disconnect the quick connect wand to create a larger opening and flow the product back into the tank for it to prime. It's not ideal depending on what's in the tank.

[@PaulsPrimeCuts]

It seems fine now it was just not priming at the time I set it up

[@bobbytaylor3177]

I realize the Flowzone is overkill for a home owner but I still want one. In the video you stated you didn't need the extra power of the typhoon. do you recommend the cyclone for a homeowner?

[@PaulsPrimeCuts]

The flowzone is great for a homeowner… the cyclone is plenty capable for most lawn spraying jobs

[@bobbytaylor3177]

@@PaulsPrimeCuts Thank You

[@benh580]

Hey Paul. Just ordered the cyclone 2.5. What are the differences between the typhoon and the cyclone? Tried looking on youtube and don't see a comparison.

[@PaulsPrimeCuts]

I’m not sure on the newest stuff but it was a bigger pump and battery I’m assuming that’s still the case

[@eshskis1]

Thanks paul

[@hoganshideout]

Great review Paul!

[@PaulsPrimeCuts]

Thanks

[@SuperDagbo]

You are to cool. Loved video great info.

[@cmsense8193]

Excellent. I will order mine asap! Any good free shipping codes you know of?

[@TaylorMadePM]

Great video as always Paul! I love my cyclone ready for a 2nd one now to keep fungicide and herbicide sprayers separate. Like those custom tips. How can I get a set of those?? Happy spraying!

[@PaulsPrimeCuts]

I put a parts list in the description check it out

[@TaylorMadePM]

I was looking didn’t see on my end but ok thank you.

[@tattooed_christian_dad]

I’m confused about the parts list the nozzle body and the quick connect part numbers both bring up male fittings. Am I missing something?

[@LoneScout1]

Paul can you please articulate the part numbers for the 2 red tips thank you.

[@PaulsPrimeCuts]

AIXR110vp #4

[@roblenberg6384]

You are a trip , love it

[@vincedoell1623]

For spot spraying 2 4 D with the cone tip what setting would you recommend? Or I should say how far do you turn the dial?

[@PaulsPrimeCuts]

You can calibrate the sprayer at each setting… so have it set for the calibration setting you made your mix for …. Look up some calibration videos GCI Turf has some good ones to figure out how to calibrate your equipment… thanks for your question

[@Orangeokie7]

I'm getting a flowzone in a couple of weeks and I've been debating which one to get, the typhoon or the cyclone. My heart says the typhoon but reality says the cyclone. For now I'm only spraying my lawn with fert, iron and preemergent but I always have that feeling if I don't get the typhoon I'll end up needing the higher pressure for something. Will the typhoon do a good job with pressure washing like a wood fence or anything?

[@PaulsPrimeCuts]

It won’t spray as hard as a power washer. A power washer will spray at around 2 to 4 thousand psi where the flowzone is around 100psi . You may be able to spray cleaner or whatever your spraying a little higher with the Typhoon…. I really don’t think you will miss the added power of the typhoon over the cyclone for just spraying lawns

[@grayfox9911]

Thanks Paul!

[@lushlawns8904]

Dear lord you almost killed me. Lol.. great job

[@PaulsPrimeCuts]

We can’t have that happen… your people need you

[@williamgrimberg2510]

What’s the price for the Flowzone Cyclone 2.5 and accessories?

[@PaulsPrimeCuts]

I can’t remember exactly what I paid… around $300ish the parts for each spray tip are probably around $15

[@louisclarkeii]

Your a clown! I was laughing my arse off. You would make a great Viking….. “Of to Valhalla”

[@PaulsPrimeCuts]

😂

[@naegleriafowleri2230]

how do you continue spraying without your finger on the trigger? is it possible, I have the same backpack I cant do it

[@42swissmocha]

See, us lawn jockies can quote Shakespeare. We aren't bunch a knuckle draggers.

[@PaulsPrimeCuts]

I had to memorize that whole speech in 8th grade…. I can remember that still but can’t tell you what I had for dinner last night…. Odd how that works

[@42swissmocha]

@@PaulsPrimeCuts Lol, I'm sure you made a great Marc Antony, you gave Brando a run for his money.

[@PaulsPrimeCuts]

@@42swissmocha I’m like the old fat apocalypse now Brando currently

[@fragglerock122]

Paul, is it ok to spot spray without the wand?

[@PaulsPrimeCuts]

It’s alright with me🤷‍♂️

[@fragglerock122]

@@PaulsPrimeCuts i was just concerned about the drift, I would spraying with the green tip from the strom. Thnks, have a great day

[@PaulsPrimeCuts]

@@fragglerock122 I spray with it right from the gun sometimes it’s almost like using a mini skid sprayer. But yes drift could be a concern using it in that configuration

[@ultragreenllc]

Can you recommend a replacement gun? I have a monsoon 9gal version with less than three hours of use and the spray gun is leaking product everywhere after use. I contacted flowzone about it and did not receive a reply to my ticket as of yet.

[@PaulsPrimeCuts]

I have 2 of the monsoon units the gun has been fine but the plastic rings that hold the handle in place broke day one on both units…. I’d stay on the guys at flowzone until they send you a new gun

[@hotchilidogcarl452]

My fill lid cover leaks when tipped to the side. Brand new. Anyone else have this happen.

[@tnhawkeye6155]

You heathen! Opening a package from the bottom?

[@PaulsPrimeCuts]

That way it fell out ready for action

[@MatthewWebb62024]

Would you happen to have the part number, or name of the plastic part at the 10:29 mark? Having trouble finding it.

[@PaulsPrimeCuts]

I put all the part numbers in the description

[@MatthewWebb62024]

@@PaulsPrimeCuts Thanks, Paul

[@ninazeng6036]

Nice video!

[@GardenerEarthGuy]

Epic

[@ninazeng6036]

【from Hipa】Do you like to test accessories for your equipment?thanks

[@stevewilley5185]

Hello? Anybody there ? Just checking.....

[@PaulsPrimeCuts]

No

[@joshwhitaker3163]

What is the part number for the teejet cone nozzle?

[@PaulsPrimeCuts]

I think I put all the part numbers in the description

[@joshwhitaker3163]

Unless I’m doing something wrong and not seeing the whole description I don’t see any numbers for the tips you mentioned. The Teejet cone nozzle I think should start with a TG. I’m not the sharpest bill I’ve in the drawer so I may not be seeing the whole description. Thanks

[@PaulsPrimeCuts]

@@joshwhitaker3163 yeah I just looked it’s not there. I’ll have to try to remember to look and get back with you

[@joshwhitaker3163]

I know you have more important things to be doing. Checking to see if you have that number for the teejet nozzle? Thanks

[@LoneScout1]

@@joshwhitaker3163 Paul refers to the cone as a TG-3….definitely gunna get the Cyclone, then add the T-Jet 110 degree and the TG-3 Cone tips. Great video Paul thank you.

[@JsCrazyCutzLLC]

2:40🤣😅😂😆👍

[@slowb4lls1]

Your hilarious man. I need to get up with you tho, I stay in wake forest/ Rolesville area and need to scoop some stuff I know you got? Can I get an email to hit you up?

[@PaulsPrimeCuts]

[e-mail]