FlyEgg 100 Emax RS1106 6000kv

[@neato4u]

One of the best fpv pilots in Malaysia! Fastest egg i've ever seen!

[@afiqaFaT]

neato4u wooww.. im only novice pilot haha... thanks wankay!

[@neato4u]

AFIQ aFaT wow the best and humble pilot... hahaha. Keep it up bro. Geram betul tengok telur ni hahaha

[@afiqaFaT]

neato4u hahaha... geram telur kah3... beli la 1 kita fly skali hehe.. anyway, checkout video baru upload.. cruise saja hehehe

[@JuLiRmE]

my kingkong 100 burned the engines, I'm thinking of switching to emax 1106 7500 kv, answer me why you use 6000 kv? use 3s and 1940 helice do you think it would look better 7500 kv?

[@afiqaFaT]

Julierme Lopes micro motors are much more sensitive than 22xx motors.. if u want to use 3s, never use 7500kv.. as the high voltage will spin the motors too fast and can cause the motor to burn.. the highest kv for 3s + 2" props is 6000kv.. still, the motor will get hot even while hovering, but its just a little warm after hard fpv flight.. if u want to use 2s+7500kv will give power just below 3s+6000kv with no hot motor.. Also, dont forget to upgrade your esc from stock(10a) to higher like mine (28a).. i just wasted my money on buying new stock esc.. both burned with this bigger motor and 3s setup haha.. Btw, i have upgraded my frame to the aurora mini fight 120. Transferring all fly egg current setup to the new frame.. using 2.5" props = ultimate micro fpv experience.. wait for my new upload!

[@JuLiRmE]

thank you very much for the tip, could you inform me the link of the new esc of 28A?

[@afiqaFaT]

Just search "28a esc" at banggood or gearbest.. and also, of u were to use stock fc, u cannot use the plug n play pins.. u have to desolder all n solder manually the signal ports.. for me, i bought f3 nano with osd.. using ports to connect the signal wire.. and yes, this hobby require many "try n error" for me.. spent so much just to get the perfect micro quad..

[@srsr8692]

A monster. What props?

[@afiqaFaT]

Mr Santi thanks.. gemfan 1940 hulkies...

[@justhackitfpv]

What were yuu running at 8K/8K?

[@afiqaFaT]

I think i used 4/2k at that time.. the quad had been sold :-P

[@justhackitfpv]

@@afiqaFaT did it heat

[@justhackitfpv]

@@afiqaFaT mine heats up terribly at 8k/8k

[@afiqaFaT]

@@justhackitfpv 2s or 3s? Same motor?

[@justhackitfpv]

@@afiqaFaT 2s same motor I run at 8K

[@archer4922]

Holy crap that's fast on a fly egg 100. I just killed my stock motors today lol and looking for replacements. Was looking at some 1104 7500kv but the emax wow look nice and huge on that frame.

[@afiqaFaT]

Archer FPV thanks bro! It was a gamble when i purchased these motors, but it turn up sweeeett! but, dont forget, when u buy bigger motors, esc will get tired to give power.. so it will eventually cutoff (one esc) when using larger props for example 2035 quadblade.. so now i purchased f4nano with 28a escs from gearbest.. hope it stop the cutoff problems!

[@afiqaFaT]

Buy bigger motor as it will be easy to retro fit to other frame size with no problems. This size will be evergreen to upcoming time..

[@archer4922]

AFIQ aFaT nice. I do have the elf cam stack combo with the 28a esc on the way but saving it for a 3 inch build. But I'm thinking 1104 or 1105 6500kv would still be awesome on the fly egg 100 frame and still use the same stock stack.

[@afiqaFaT]

Archer FPV yupp.. thats a very good combo.. i would like my nano size 100 fly in the track with bigger minis and dont get esc cutoff.. thats frustrating

[@mikeorion5150]

Is 10A ESC enough for those 1106 Emax motors?

[@afiqaFaT]

Mike Orion nope, you must upgrade the esc to 20a atleast...mine is 28a!

[@dketchaman]

Does the motors get too hot? What cam is this

[@afiqaFaT]

dketchaman nope.. when hovering, its hot, but after hard track flight, the motor just land warmer than normal warm.. very impressive! Im using Stock camera