I have this same truck, I put in a fusion se 1200kv motor, 35kg servo, 90mm desert lizard shocks, pro-line 1/8 Chevy hd 2500 body (for trailing) black steel wheels with super soft tires and dual stage foams. The front bumper was cut off, fenders/stepsides removed, and the stock rear bed/rollbar and body are getting weathered/painted/rusted (for crawling) also currently working on a servo on axle mount to eliminate that terrible panhard bullshit up front.
@gerrysoldguyreview8 ай бұрын
Sounds like you have been putting in the time JP! I will have some tips with the front once the finish video comes out!
@timjohnson94068 ай бұрын
Definitely looking forward to seeing what you do with it. I just did some mods to mine. made shock towers and put some 90s on it, And some aluminum wheels. I haven't taken it out yet but hopefully next weekend.
@gerrysoldguyreview8 ай бұрын
Update coming later this week Tim. Looks like we are on the same page with mods!
@ryand47868 ай бұрын
I have the FJ40, installed a fusion Pro , works amazing but can’t get rid of gear noise . It was noisy when I first bought it, but worse after the hobby wing . The pinion would not come off the old motor so I put on an axial 14 tooth pinion , noisy, played with gear mesh , noisy, tightened mesh , noisy, loosened mesh , noisy, greased the hell out of it, noisy. I’ve greased entire driveline before motor swap and I know the e noise is from transmission as I’ve isolated it. Unless you have any ideas , my next step is to heat up old pinion , install onto hobbywing and try again
@JP-qq2kn8 ай бұрын
Mine is really noisy also.
@gerrysoldguyreview8 ай бұрын
I was also thinking about noise, but when I compared it to my other rigs with metal gears it is actually less noisy then my vanquish rigs! Not sure though if maybe yours has an issue but I will bring it up in the finish video!
@toeshifter8 ай бұрын
I should have watching part 1 before I watched part 2. Diggin it.
@gerrysoldguyreview8 ай бұрын
Thanks bud 👍
@hellorc76788 ай бұрын
Cool looking!
@gerrysoldguyreview8 ай бұрын
Thanks buddy! 😁
@ryand47868 ай бұрын
Hey Gerry , thought I’d give you and anyone who cares an update on my FMS FJ40. I resolved the gear mesh noise by installing the original pinion gear it came with. The pitch was different , not obviously different , but if you sit and stare at it long enough, you can see that the teeth spacing is off just slightly, enough to cause a HORRIBLE noise you can’t get rid of. Anyway , if anyone changes motor , make sure you get the correct pitch pinion gear , or re use the original . I tried 3 different pinions , lots of grease , finally figured it out .
@gerrysoldguyreview8 ай бұрын
Thanks for the update Ryan 😀
@derrickhays36278 ай бұрын
That is a great looking body been wanting to get 1, interested to see how it comes out. Thanks
@gerrysoldguyreview8 ай бұрын
Thanks Derrick 😁
@TrokaRC8 ай бұрын
Few mods and your golden. Fusion 1200 or 1800 is perfect for these.
@gerrysoldguyreview8 ай бұрын
Gonna see how the mods go then I will think about the fusion, got one sitting on the shelf!😁