Foldable Wall e print on prusa

[@FilamentStories]

He is absolutely perfect!

[@fab365_official]

Thank you very much! I look forward to your print review~

[@paulseanpaulsean9550]

@@fab365_official can u make me one but the problem is im ph

[@fununtilfun58]

4th reply what do I get

[@Muzanthegenderbender696t]

‘He’?

[@taxman3749]

Those tolerances are WAYYY too good to be legal. What is your secret, printing man?

[@guscrossing]

You guys outdone yourself! This design and assembly mechanics are a great culmination of 3D modelling and printing experience. Hope you sell loads of these!

[@owlenderg]

Seeing him snap together so easily is so satisfying- I'd love to see a version of this where you can open his front and put something small inside if that would be possible!

[@Robothut]

Great design and the price is right. FREE if you have bought other designs in the past. Thank you for sharing with us.

[@fab365_official]

Thank you Robothut~ I hope you print this design~ 😁

[@jamesdyer173]

Dude you would be a awesome toy maker. Toys these days now are so...ugh. I remember as a kid how much fun I had with toys that could move better, pose better and were much more to play with. You have a gift.

[@OriginalParadigm357]

Honesty whoever designed this is a genius. Im printing the smaller parts right now and the way they positioned it so this can be made with 0 supports. Mind blowing! I love seeing walle coming to existence right in front of me ❤

[@fab365_official]

Thanks for printing and comment! Please enjoy~

[@JayEllis76]

What would be a good challenge would be to make it compress into its cube form

[@fab365_official]

😅

[@SMGSpiritRT]

It would be a bit hard actually, because the Wall-E's lenses uses the same storage distribution as the arms, so you would need to see how to compact his eyes into themselves, and about the joints of the tracks, would be required to be flexible and to go some hinges between the tracks and go into the center of the compaction. Because the Transforming Wall-E toy from 2008, kinda almost make it, but it could only be limited to have narrow and compacted tracks, and compacted arms and lenses, or the same proportion, but the cube was a bit bigger. I got the toy, so I spend days analysing the model itself.

[@JayEllis76]

@@SMGSpiritRT thus it would be an interesting design challenge

[@shelbyseelbach9568]

@@SMGSpiritRT Are you under the impression that a good challenge is an easy one?

[@Drakuba]

thats what i expected with that descripton - "Foldable Wall-e print" :/ lack of glue is impressive, but thats about it. Rest is not that hard to make, tho will take some experimentation

[@sanches2]

Thanks! The model design is brilliant!

[@fab365_official]

Thank you so much for your supports!!! I will do my best~😆

[@sanches2]

@@fab365_official Mate, if this is not your best i am intrigued ;)

[@ToaKoran]

This... Is honestly beyond stunning. This, right here, is the *_perfect_* Wall-E playable desk toy. besides needing some friction in a few spots the only thing he's missing is a movable thumb. I don't have a 3D printer, nor do I have access to any places with a public use 3D printer, so I genuinely have to ask if you would be willing to print these through commission, and if so I'd like to know what you'd charge to print the little guy's parts and ship them.

[@deeznuts23yearsago]

Same here, I would buy this no matter the price I love wall-E and I missed out on the Lego version so this I would love

[@dpiddy82]

Same. I can't print this but would purchase one, if the option was there...

[@themblue8236]

This would not be legal to see due to copyright laws

[@demogod4955]

@@themblue8236 As long as the 3d model isn't being sold it should be fine.

[@ToaKoran]

@@themblue8236 I would be paying for the service of someone printing something that is publicly available, the expense would not be for the shape of the item/character, but to cover the materials used as well as the shipping. The model being public means you aren't purchasing it. You're just paring the labor and material expenses for someone else to print it because you haven't the tools necessary to do so, yourself.

[@anael_64]

Wall E was one of my favorite movies growing up and this also turned into one of my favorite videos of the year.

[@fab365_official]

Thank you very much for watching and comment!!! Please enjoy my design and video~ 😄

[@fuzi36]

When I print out the wall-e, my daughter will be very happy! Thank you very much for making your work available for free download!

[@fab365_official]

You are welcome! Have fun~ 😁

[@SpikierBore54]

I like the way wall-e looks. It reminds me of those toys over there. It is seen that you have improved a lot in your 3d impressions since the last time I saw you, keep it up my friend

[@theglitchedgremlin7331]

Suprising amount of articulation in thos arm dispite it being a 3d print. Realy cool

[@fab365_official]

Thank you for watching and comment! Please enjoy~

[@krumrick2]

I love Wall-E...thanks for that!...one question only the recommend extrusion width used in this one?

[@fab365_official]

Thank you! I use 0.4mm nozzle and same extrusion width. Please enjoy~

[@Qvartz_Lite]

I literally dreamt of this toy the night I went to watch Wall-E in the movie theatre. Thanks for making my dreams true!

[@JohnSmith-es2fh]

it's so cool the details and mechanic parts are on top, some dry brushing will make it looks even better

[@etmax1]

Amazing, I think the most true to form Wall-E out there. My grandson wants a robot for his birthday now that he heard I have a 3D printer, so I guess I better get cracking.

[@fab365_official]

Thanks~ I hope your grandson like my Wall-e. Please enjoy~

[@etmax1]

@@fab365_official Sorry to bother you, I have printed it and mine doesn't click together as permanently as your video 'appears' to show. Are the six sides and silver front insert supposed to be glued after clicking together? Also after folding in and positioning the track wheels assembly, they drop down quite easily. should they be pushed in and then glued as well?

[@godzillaprimekingkaiju2193]

I love WALL-E, he’s my favorite character from the movie

[@fab365_official]

Yes. Me too.

[@nintenjoe9022]

This looks amazing! Thanks for sharing with the world!

[@fab365_official]

Thanks for watching and comment!!! Please enjoy~

[@noobroblox064]

Zawarudo!!

[@TechnoKnight2520]

It looks both high quality and high effort. I wish it could transform the same way like the original.

[@fuzzy19111]

This is great! Now a would love to see Adam Savage weather the little guy.

[@fab365_official]

Could you ask or vote on my request page please? fab365.net/requests Thank you~

[@scottmcmaster4927]

Very impressive design. The only improvement it needs is something to hold the eyes in position when you move them. Otherwise this design is perfect. So well done.

[@fab365_official]

Thank you for your comment! 😁

[@glenn_r_frank_author]

very cool. Love these designs. I was hoping the garbage masher door would open on him too... but the amount of movable parts on him is very cool as it is!

[@fab365_official]

It may be possible with further advancements in 3D printers. Thank you~

[@MrSlonkVR]

I’m printing this right now it’s super amazing highly recommend if you have a printer

[@fab365_official]

Could you share on my review page please? fab365.net/reviews Thank you very much!

[@MrSlonkVR]

Nevermind it broke the second I tried putting it in shape

[@3DPrinterAcademy]

incredible design!

[@fab365_official]

Thanks a lot~ Please enjoy~

[@lightningvini]

what a handsome lil' robot!

[@fab365_official]

😁😁😁

[@primejee]

It's amazing~!! I love Wall-E~!!

[@fab365_official]

Yes~ Please enjoy~

[@peterclegg2609]

Truly awesome, I'm an old dude and still a wall e fan.

[@fab365_official]

Me too. Please enjoy and thank you~

[@robotjosh2239]

Been waiting for something like this to exist

[@fab365_official]

Thank you! Please download and print.

[@bargen0w]

Looks like theres also enough room you could fit a tiny lil voice box inside wall-e where if you pick up the model it could say "wall-e" like in the movie

[@Godzillaman-qi6dq]

Outstanding I'd so buy one of these I love Wall-E so much

[@fab365_official]

Thanks~ It's time to buy 3D printer.

[@孟軻-v7i]

I find this way more attractive than most of the morden toys

[@fab365_official]

This is the future!!!

[@sergiobochatay3116]

Amazing Job, congratulations for this design!!!

[@fab365_official]

Thank you for watching and comment! 😁

[@CaptainWizard3000]

The whiteness of the portion around his lenses makes him look like a minion and I can’t unsee it now

[@marianneoehrli2758]

Hello, top ! J'ai un petit robot ordinateur comme lui que j'avais trouvé il y a des années pour les enfants ! Merci pour le STL , je le ferai pour mon petit-fils. A bientôt bye bye

[@fab365_official]

Thank you! I look forward to your print review~ Fab365.net/reviews 😆

[@oxlh]

It would be amazing if he could turn into a cube, just like in the movie

[@fab365_official]

I can't

[@K12SXXFire]

PLEASE say there's plans for EVE !!!! Well done once again !

[@fab365_official]

Depends on downloads achievement. 😁

[@corellioncrusaderproductio4679]

If you want an Eve, go vote for her here! fab365.net/requests/3512262154/EVE_Extra-Terrestrial_Vegetation_Evaluator_from_Disney_Pixar_039_s_Wall-E_Fab365_has_already_produced_a_wonderful_Wall-E_model_i

[@ezequielgilardi8233]

Yo también quiero que pongan a eve

[@neighbour01]

Very cool, it also got articulation to make some poses, furthermore the wheel could rolling! Impressive you can makes your own design wall e figure. 👍

[@fab365_official]

Thank you for watching and comment!

[@levimccallum7722]

my satisfaction is immeasurable and my day is perfect

[@codmust215as]

I'm love WALL.E.And perfect!

[@fab365_official]

Me too. Please enjoy~

[@Templar-33]

The Wall-E community is still alive after all these years

[@Sinclrdrzzydream]

Where can i get this? Or where can i print it, How can i print it? Are there blue sprints.. err 3d prints?

[@fab365_official]

You can download 3D file from Fab365.net

[@ptalbany]

printed the first half last night and will do the second part tonight and then put it all together tomorrow can't wait for it to be done will be posting photos

[@fab365_official]

Thank you very much~ Could you share on my review page please? fab365.net/reviews Thank you very much!

[@blazebroughton345]

im a big wall e fan and i love this 3D printed wall e `

[@fab365_official]

Thank you for watching and comment! Please enjoy~

[@frielplushbro6066]

I love wall-E cute design and great job

[@juvaco5]

Buenas tardes, es fabuloso la forma de ensamblar cada una de las piezas... Felicitaciones. ¿Que tipo de pegamento se emplea?

[@THEDANRMUSIC]

If I scale up all the pieces by the same percentage, will the fittings fit well?

[@fab365_official]

Sure! Please try~

[@LegitRandomContent]

as a wall e fan, i am extremely jealous

[@fab365_official]

Don't be jealous. You can print~

[@m4rvelous23]

Wall-e was the first movie I saw in theaters back in 08. Best pixar movie IMO

[@fab365_official]

I agree. One of the best pixar movie.

[@UnitedBeasters]

That looks so awesome

[@fab365_official]

Thanks for watching! Please enjoy~

[@UnitedBeasters]

Okay

[@Ajdo_Xiao-Fan]

Wall•E was an epic film

[@fab365_official]

I agree~ 😁

[@망뭉망뭉-o2j]

ㅋㅋㅋㅋ영상 볼때마다 으른이 전용 조립 장난감 같아요 애기들 하다가 막대기 부셔먹을것 같은 느낌...

[@fab365_official]

아무래도, 아이들용은 아니죠. 약간 레고 태크닉같은 것이라고나 할까요?

[@망뭉망뭉-o2j]

@@fab365_official 먼가 그 건담조립..?? 느낌도 나용

[@teabagNBG]

wow i will do this when i got the colors.. very nice!!

[@fab365_official]

Thanks! Please enjoy~

[@Cruxair]

I have never realized the arms move like that

[@fab365_official]

Thanks for watching and comment! Please enjoy~

[@mrmateusz5188]

I love it! Especialy the head and arms! Wish the foldable meant you could fold him into a cube tho :( good work tho!

[@fab365_official]

It may be possible with further advancements in 3D printers. Thanks~

[@matthewgarner7215]

This is great and all, but what i wanna know is why did you make his body one weird little thing where you have to fold it in order to make it look like a cube? Couldn’t you just make a regular cube and treads?

[@muratdogan4142]

when you print the model, there is only a circumferential yellow line on plate. when i try print the model, it prints supports at bottom of the model and my model is not easily separatable as yours. how can i set printer?

[@Notengonombre383]

Este walle es muy bonito 👍😃😘 Cómo me gustaría tener uno

[@fab365_official]

Thanks~ It's time to buy 3D printer~ Please enjoy~

[@Notengonombre383]

Ok

[@HReality]

I absolutely love the models fab365 comes up with. But I will admit Im envious. I have a few printers and none of them are dialed into be this clean

[@fab365_official]

I watch a lot of youtube videos to keep the quality of the output of my 3D printer. KZbin shares many ways to improve the output quality of your 3D printer. I would recommend you watch a lot of KZbin videos about 3D printing. Thank you~

[@Ronoaldo]

I don't think my Flashforge Finder can print this specifically because It don't have that print bed sheet so removing the print afterwards involves a spatula that will break small parts. Have failed to print other foldables too, for the same reason.

[@Rezer0554]

Tree or normal support when printing his body. I have ender 3 pro btw. Thanks

[@Murphy007]

Nicest print I’ve ever seen.

[@fab365_official]

Thank you! Please enjoy my print~

[@burntrab3936]

I love Wall, at home I have his fan to cool me down

[@fab365_official]

😃

[@MrMysterious31]

please let me know that is the star ship crew available as an assembled unit?

[@8Sigurd]

For anyone who's planning to assemble this thing: YOU CAN'T FORCE THE TRACKS, DON'T TRY IT! You'll only hurt your fingers. Rather than that, try using a nails file on the pins and align them one by one - first the lower part, than the middle one, and finally the top part.

[@fab365_official]

Thank you for sharing your experiences.

[@ThePapaVader]

You used a .25 or .20 mm nozzle right? I could never get this level of details with a .4...

[@fab365_official]

I use 0.4mm nozzle always.

[@FurryAzzre]

Oo youtube knows I like Wall-E, good to be back.

[@fab365_official]

KZbin knows what you like, and what I like. Thanks for watching!

[@FurryAzzre]

@@fab365_official Heh, See if you can do a 3D print of the Axiom.

[@HEAVY-GAMING1]

Turn it into a remote control like dang

[@pawpawstew]

Do you know if the layout will fit on a 3D resin printer? What's the bed size?

[@corellioncrusaderproductio4679]

How well would this print in PETG on an original Ender 3? I've had great issues with petgs stability, but it's all I've got at the moment. Would I need to adjust anything to make it work better? I foresee lots of issues with the connections that hold the body together, as with the neck. Phenomenal work though! That's an incredible model, especially with the extra gimmicks like the moving tracks and rear hinge. You've outdone yourself!

[@thatpablopablo8129]

Much better than Mattel's one 🤩

[@fab365_official]

Really? thank you very much~

[@kiuci271]

How can a plastic printer create some object with foldable knots?

[@cindywhite9754]

When I made this print, nothing "clicked in place". I had to glue everything together. I used a Bambu Carbon X1 Printer using PLA. I DID try the body in PETG, but same thing. Everything is loose. But at least I can glue it. So cute.

[@fab365_official]

Please watch this video for parts fitting. kzbin.info/www/bejne/r6uzonWqZ7ilmacsi=Dkjh_ktNvmdKgmt-

[@Sumivizion]

How do i get the pegs at the top of the arms that slide along the rails to print correctly? My printer refuses to do that it just falls apart or tangles into a little ball at the top of the arm. (Im using cura as a slicer and my printer is a Anycubic Kobra Neo with a 0.4mm nozzle.)

[@davidd6909]

Thanks for the Video what kind of glue do you recommend for PLA

[@fab365_official]

I use this super glue. shop.fab365.net/products/loctite-super-glue-easy-brush-on-spreadable-applicator-5g-%EB%B3%91

[@andrew-o8w]

This brings back memories of a cake I had once

[@etmax1]

There's one piece in yellow that looks like a squarish U that is not shown where it goes??

[@thelastwoltzer]

Ngl I was expecting it to be folded down to a box at the ending

[@Aufych_CCCP]

Wow, cool, I love Wall-e so it's also printed on a 3d printer!

[@fab365_official]

Thank you! I look forward to your print review on my review page. fab365.net/reviews

[@oliveryates7873]

Having a lot of trouble printing this the body just seems to fall apart and the rods connecting the panels fall out of it place what settings did you use anything would be a help thanks

[@fab365_official]

Please use raft. And check my print-tips. fab365.net/print-tips-list

[@oliveryates7873]

@@fab365_official used a raft worked with adhesion but the rods just came out like the printer couldn’t print them well enough even with different layer heights

[@dabijaadrian8081]

Wow is FREE really THANKS YOU 😀

[@cookiejarseattle]

What’s that glue you were using? Thanks.

[@fab365_official]

I use this glue/ www.shop.fab365.net/loctite

[@Pokaroquai]

Oooh it looks cool! Good job :D

[@fab365_official]

Thanks for watching! Please enjoy~

[@Destroyer-of-bones]

Can you make a link to the way you made this

[@fab365_official]

Please check my design process video.- kzbin.info/www/bejne/rqjUZI1slLaFj5o

[@DigitalXrisXros]

let the printing begin !

[@Timanator]

This is so cool! Thank you for sharing!

[@fab365_official]

You are welcome~ Please enjoy~

[@Alswo-b1s]

귀엽게 잘만들었어요 ^^d

[@fab365_official]

감사합니다~ ^^

[@EricJimenez2006]

I love that robot Wall-E

[@fab365_official]

Me too. Please enjoy~

[@kayesrahman3283]

Very nice wall E question can you 3D print a destroyer

[@fab365_official]

Could you ask or vote on my request page please? fab365.net/requests Thank you~

[@kayesrahman3283]

I did it

[@Chickennuggets107]

Hope he makes a version that will transform into cubes one day

[@ordepervarts7252]

I needed to see something like this ages ago, love it. :')

[@JACKHARRINGTON]

Gee, I would have loved doing this as a kid.

[@KeyFChicken]

I love him, I want him, I *need* him

[@fab365_official]

Thanks! It’s time to buy 3D printer!!! You can print by yourself~

[@kasirga098]

What percentage of padding was it printed with?

[@D.Revealus]

hi please could make auto pilot from wall-e like this?😄 because it looks awsome!

[@Skelephone69]

This is one of those videos that in 4 years it has 9.6 million views

[@TheInsanebrain247]

Oh, when the title said "foldable", I assumed that meant it can compact into a box like the real Wall-E. Regardless, this is so cool!

[@fab365_official]

😅😅😅 Thanks anyways~

[@vincentdecicco7393]

Awesome! How do I get one?

[@fab365_official]

You can download and print~ 😄

[@QuillVest]

Looks amazing and I would love to have one! Is there any way I could purchase one, as I don't have any method of making one myself?

[@Ryllas01]

“Alllllll the little pieces click together!”

[@fab365_official]

😁

[@kloudnine2832]

i guess wit this you can actually print out an idea for a transforming robot as well???