Fooocus Installation, walkthrough, updates

[@MonzonMedia]

Unfortunately Fooocus MRE will no longer be supported, so I decided to cover the original version. Are you using Fooocus right now?

[@AstroMartian]

We need an easy installation for MAC

[@lofiwonderhits]

Need an easy installation for AMD I just cannot get it onto my computer well working that is

[@ramppanaattori]

Thanks for this!! I learnt how to use that painting tool correctly. Would be nice for us beginners to understand how to download + set (good) lora, checkpoint etc., but also how to use those right way with Fooocus. Honestly I am really lost with that stuff and therefore it would be helpful video content.

[@MonzonMedia]

Sure my friend! I think it’s a great idea 👍🏼 I’ll add it to my content list of todo’s!

[@armondtanz]

​@@MonzonMediayes. I agree. More complete beginners guide. Love to learn this. Not 100% sure what all terminology means.

[@dethzdecals]

Looking forward to more vids on fooocus. . Thank you for this one.

[@MonzonMedia]

You're welcome! Let me know if there is anything specific you want me to cover. 👍

[@schtroumpfyoda8469]

and now with a FaceSwap just breathtaking ! une pure merveille ! ;)

[@MonzonMedia]

It’s great isn’t it! Was going to do a video just on that 😊👍🏼

[@Silvan-qq3vj]

this is the video i searched for

[@falsettones]

Welcome backkkkk! ⚡️

[@MonzonMedia]

hahaha thanks bud!

[@fbfbros]

i have some questions about Fooocus. 1/ Can i open Fooocus without redownload everything over again ? 2/ I did the -- listen to the bat file but it doesnt work. Can you explain it how to work ? 3/ Can fooocus runs without the internet ?

[@DevoutJourney]

It's been about 6 months since i've used Fooocus, and wanted to get back into it, since i've created this new channel. Do you know if there are any other open source projects for the motion side of AI imagery? Something like Leonardo AI but free

[@DevoutJourney]

Side note. Your voice is great, and very easy to listen to. And this instruction showed me some stuff I wasn't super familiar with and I really enjoyed it! thank you

[@Anton_Yegorov]

Amazing! is Fooocus available with MacOS?

[@MonzonMedia]

I believe for the M series but performance isn’t great.

[@ThumbnailGrail]

Very cool! I'm going to have to experiment with this.

[@MonzonMedia]

Super easy to install as long as you have an NVidia GPU min 4GB VRAM. Has sort of a Midjourney like feel to it.

[@go4get]

How to fix bad hands, legs, and face in fooocus mre?

[@ravenbandit]

Great video. . Hope more fooocus vids come soon.

[@MonzonMedia]

Thank you! Let me know if there is anything in particular you want me to cover. 👍

[@Kryptonic83]

Advanced image prompt canny and depth options are basically controlnet right? I’ve been enjoying fooocus lately and editing the config to point it to my A1111 model/lora folders so I don’t have to redownload them.

[@MonzonMedia]

Yes that’s correct, basically works the same way. 👍🏼

[@SergeGolikov]

Thanks for this👍 Fooocasing on the benefits over Comfy Ui with which I am more comfortable 😎 Sorry for the dumb question, till confused if Fooocus can only use SDXL models, or other non SDXL such as SD1.5 trained ones? Cheers 🍷

[@MonzonMedia]

Great question Sergei, Fooocus is meant to use only SDXL, however as shown with the anime version you can use SD1.5 as a refiner but so far I've found it works best with non-photorealistic images like comic, anime, 2.5 images.

[@schtroumpfyoda8469]

another version Fooocus-Control 2.17 by fenneishi . very very promising ! gods and godesses bless the Fooocus teams ! ;)

[@MonzonMedia]

Yes just saw it yesterday in the discussions! Going to cover it soon. It is a fork though, I wish it was installed directly in the main fooocus. I hope this version stay around.

[@CRD902]

Thanks for this useful video 👍🏻

[@alfonsodefeo4645]

Ho Windows: non riesco ad installare run_realistic: parte e quando mi dice di premere un tasto per continuare va sul file run_realistic Mi sapresti dire cosa fare.Grazie

[@strangehermitman7898]

When I click the batch file, command prompt is open and it says click any key to continue. However, that just closes it. Can somebody please help me?

[@Investordfg1]

same here

[@Darksagan]

Great tutorial.

[@MonzonMedia]

Thank you! I appreciate it!

[@Benjamin-om3ih]

Hi there. Great video. I have a question. Is Fooocus a model or is it like comfyui or a1111? i am new to SD and am trying to learn about the technology. Thank you for reading

[@MonzonMedia]

Fooocus is a stable diffusion platform like ComfyUI and A1111, just a different platform with different options, not as robust as those 2.

[@chhimsopanna1456]

I got the message "Error" while moving model to GPU .? Can you tell what is the problem?

[@dylanharo7277]

Hello, I had this installed correctly was working fine then I started seeing this message when I try to run and it will no longer open: urllib.error.URLError: any ideas?

[@rickyaclickpowr2187]

If you select developer debug mode you can see the control net options

[@MonzonMedia]

Yeah I had recorded this video prior to the release of the advance image prompting including controlnet feature and meant to cover it in a separate video. I do touch on it on a different video though 👍

[@dannybui3542]

Thank you for the in-depth tutorial. How'd you got it to do dark mode?

[@SamFox-lb9ge]

Hi, this is a great video, but I was wondering if you could add to it the proper method to install for AMD. The instructions available are a bit confusing for a beginner anyway. Thank you so much for the consideration.

[@MonzonMedia]

I'd love to but unfortunately I don't have an AMD card and wouldn't be able to demonstrate properly. I'd suggest going on the github page in the discussion tab to see if others have any experience with AMD. github.com/lllyasviel/Fooocus/discussions

[@SamFox-lb9ge]

@@MonzonMediaYes, I've done that nothing seemed to be available. But thank you for your reply.

[@VictorGonzalez-vj6jy]

I'm got lost so easily, haha. So once you go into checkpoint how do you get the the actual application?

[@MonzonMedia]

No worries bud and yeah I supposed I wasn't too clear at 1:17 those 3 bat files will launch fooocus. run.bat is the main one, run_anime and run_photorealistic can also be launched separately adopting those styles. Never really knew why they did it this way but oh well.

[@sergiykravchuk]

what do you recommend to create realistic photos of the cars and city background, settings for fooocus like (style, model, and advanced). Thank you. I have similar issues with fingers and head for people and some crazy things with a cars

[@HiProfileAI]

Does it have any controlnet? Or will they add it in future? Looks really good and makes it simple.

[@MonzonMedia]

There is a simple version of controlnet under image prompt, basically only canny and depth but hopefully they will ad more features. The image prompt is basically reference only or ip adapter control net functionality.

[@HiProfileAI]

@@MonzonMediaThanks. Ill have to check it out.

[@lilillllii246]

I'm always thankful. I run fooocus with Colab. Is there a way to install an extension? Also, when doing faceswap, how can I make it look as similar to the person as possible?

[@YungHaroldTheGreat]

When downloading is finished instead of opening the software it asks me to “press any key to continue” when I press a key it just closes the window. Any advice?

[@DanaerysMOD]

Hello, I am doing the installation walkthrough now, but when I open the checkpoints folder, it doesn't show SD, only shows juggernaut XL. Did I miss something?

[@MonzonMedia]

Nope that's all it comes with, you have to go to a site like Civitai.com and download the models that you want. Filter it for "SDXL" and I would just try the top ones that have the most downloads. Just put them in the same folder. 👍

[@stanmoran6161]

Does the bat file have to be run every time I want to use Fooocus? If not, how do I run Fooocus?

[@MonzonMedia]

That’s correct and the command window that opens up needs to be open at all times when using it. 👍🏼

[@stanmoran6161]

@@MonzonMedia Thank you for your reply 👍

[@AbdulKhamis]

how to add the already existing Automatic 11111 checkpoints to Fooocus folder? Is there any shortcut for that?

[@MonzonMedia]

In the main Fooocus folder there is "config.txt" file. Open that up and you will see "path_checkpoints". All you have to do is type in your path and save the file. For an example mine looks like this path_checkpoints": "C:\\Users\\ermin\\pinokio\\api\\A1111\\automatic1111\\models\\Stable-diffusion" Again yours will be different based on your set up.

[@AbdulKhamis]

It worked! Thank you very much! @@MonzonMedia

[@ErickMartinez-o9o]

Downloaded and followed steps. It never opened up

[@Epulsenow]

I am not sure, what is wrong with Fooocus. Once I install it, it works fine for one or two times, and then it stop working. I even increased the swap file to 40 GB. Did 2-3 times installation already. Any help will be greatly appreciated.

[@molotov0312]

Great video! Everything went good, i installed it but when i tried to generate images they were saved in my main SSD not in my second SSD where fooocus is installed. can i change the location where the filles are saved?

[@MonzonMedia]

Thanks! I cover it here for models but it can also pertain to your lora's, output folder etc. kzbin.info/www/bejne/bHPdoX2whsigqLcsi=RXXQvfYuDnhz1HP1

[@kenteastwood1]

I get an error when I run the bat file.. it says "Found no NVIDIA driver on your system" I'm on windows 11, 16gb ram, Ryzen 7 3700X processor, AMD Radeon R9 360 GPU... I know it's not Nvidia but I thought it would be good enough to run this even a little slowly?

[@lofiwonderhits]

Amazing thank you :)

[@MonzonMedia]

No problem 😊

[@freakguitargod]

Can i save my presets when i first load up fooocus so im not always changing the settings? thanks

[@v3rlon]

Is there a way at to use open pose or dw_pose to get better posing with fooocus? On a Mac, so I thought fooocus was a wonderful find.

[@MonzonMedia]

So there are a couple options, PyraCanny is kinda like pose and canny together, it works pretty well. Just have to play with the "stop at" and "weight" options. However there is also a fork of Fooocus with more controlnet functions that I've been testing out and so far it works pretty well. My only issue with "forked" versions is if the developer will keep up maintaining it. github.com/fenneishi/Fooocus-ControlNet-SDXL Focus MRE was another one that I loved using which was another fork and it had controlnet but the developed is longer making updates.

[@v3rlon]

​@@MonzonMedia thank you for the response. I don't suppose I can simply load poses like with the ones I mentioned. "how to pyracanny" going into my favorite search engine.

[@muhammedfasilc.p1799]

when i installed and giving text prompt it show error, can you help me pls

[@len8140]

I followed all the steps to a T. Run the prompt and it did it's magic but nothing happened. How do I access the Fooocus interface? Is there an icon to run it ? Thanks

[@MonzonMedia]

Yeah sorry I wasn't more clear, these .bat files will start up Fooocus when you double click on them. kzbin.info/www/bejne/rWaocmZrba6DedUsi=DMCS-VXpFwa7ECPE&t=77

[@CodeWithRains]

NO man it is not working , please what requirement more i do not have any GPU and in requiement without GPU also it will run , i am getting modules errors

[@Djonsing]

*Is it somehow updated over time? Isn't there a function like "Check for updates" like in StableDiffusion?*

[@MonzonMedia]

It should update on it's own, however I'm not using the Pinkokio installer to manage all my stable diffusion platforms. It has an update feature that keeps things up to date. kzbin.info/www/bejne/fIjVgWupmM6neKssi=HDFIxZt25bG5n7p2

[@sathien9158]

Brilliant video as always! I have a question, hope someone can help me: i need to do a prompt with a wolf and a spider fight each other, but i have problem with thise subjects! They tend to merge in a unique creature (a wolf with 8 legs or a spider with wolf head)

[@aminbenhassin561]

can I use normal sd1.5 lora with fooocus ?

[@MonzonMedia]

Unfortunately not since it's an SDXL platform but you can use SD1.5 models as "refiners" as a hack.

[@hakura88]

other models can't be used, is that correct? getting error that it's not implemented to use other models. only loras

[@MonzonMedia]

You just have to download SDXL models and put them in the checkpoints folder as shown here kzbin.info/www/bejne/rWaocmZrba6DedUsi=JQQAA0gQinVp82w0&t=145

[@kephillim]

Can you please do a Mac silicone vr tutorial please!

[@MonzonMedia]

I’d love to but I don’t have an M1 mac, mine is very old and barely works.

[@arieproductions2704]

Would love to see this too

[@crimez9191]

when I want to generate, there always appears "Error - connection errored out" Can you help with that or do you know why it is?

[@MonzonMedia]

Can't be sure without seeing it myself, usually it's a bad internet connection or the command window was closed.

[@termehbertina]

i didnt get the third file in checkpoints folder :( how can i fix the problem?

[@termehbertina]

"therefiner file" i mean

[@MonzonMedia]

You can download it from here huggingface.co/stabilityai/stable-diffusion-xl-refiner-1.0/tree/main and you want the file named "sd_xl_refiner_1.0_0.9vae.safetensor". That being said, it should've downloaded it by default? If not you can just save this in your models folder. You will likely not need the refiner model though, unless you choose to use SDXL as your base model. If it's a fine tune model, the refiner isn't needed.

[@pikachu7311]

I downloaded the zip file, extracted and then downloaded the 6gb file later it also downloaded 222mb and the window just closed. in many videos i have seen an offline window opening on the web browser immediately after the 6gb file is downloaded. is there any way out of this or does my laptop not support fooocus?

[@MonzonMedia]

Likely your gpu isn’t sufficient but how would I know if you don’t share your specs?

[@joepram21]

i find error because no nVidia. Its must?

[@noone12323]

When I run the bat file, it installs for some time but gives an error saying that Nvidia graphics drivers were not found in the device. and then stops working. I have run the program thrice before on the same device and that time, it didn't give any error. So what could be reason for this?

[@MonzonMedia]

What are your system specs?

[@noone12323]

@@MonzonMedia It is hp elite book intel i5 5th generation, with 16gb ram and built in graphics card which is AMD Radeon HD 8750M, with 1GB dedicated DDR5 video memory and Intel HD Graphics 4400

[@MonzonMedia]

Yeah it won’t work on your system. Many of the local stable diffusion apps run better on a dedicated graphics card, particularly NVidia.

[@cleberpaula3129]

Hi there, I have installed Fooocus as described in the video. I have started an initial example with the same prompt as you. I was trying to get the same wolf. The software started and stop at the very begin. Is does not advance. It shows a message as initializing and does not evolve after that. I have waited for several minutes… I am using a GPU card from Intel. It is: Intel(R) UHD Graphics 620 instead of anu NVIDIA card. Does it clog the software? Is there any solution to permit this software to work at my computer? Tks. Cleber

[@MonzonMedia]

I don’t think it’ll work with a uhd card. Is it a laptop? Gpu is critical for any stable diffusion platform

[@user-bi3bt2br6k]

Hi , Can you please share some system requirements for that to run smoothly

[@MonzonMedia]

All the details are on the github page which I've linked. github.com/lllyasviel/Fooocus Nvidia GPU's are best but AMD is supported but not as good. Minimum VRAM for Nvidia GPU's is 4GB and system RAM 32GB is recommended.

[@TheGeneticHouse]

I do not have a Nvidia GPU and I do not have a AMD GPU I have a AMD CPU with 12 GB VRAM would this work for me?​@@MonzonMedia

[@guilhermelasso]

Could you teach how to install it on a VPS?

[@seekersearcher9519]

Thanks

[@MonzonMedia]

You’re welcome!

[@cameriqueTV]

I get a permissions error and the .git folder is grayed out, that's on the install process. Any ideas?

[@MonzonMedia]

what are your system specs and GPU?

[@Mayankcr7777]

​@@MonzonMediamine also error Cpu Intel uhd graphics

[@marknicholas4308]

Excited to try and installed. I have AMD so followed the steps to add lines to Run.bat. Cannot generate an image though. Dropped down to 762 size and still get 'RuntimeError: Could not allocate tensor with 165150720 bytes. There is not enough GPU video memory available!'. I have 32GB of RAM and AMD Radeon RX 6700XT.

[@MonzonMedia]

AMD gpu is still beta, try the discussion board on the GitHub page linked in the description

[@enzobrand571]

Thank you. I installed Fooocus as it says in the tutorial but unfortunately it doesn’t work. The browser tells me: Connect error out, can you help me?

[@MonzonMedia]

Are you leaving the command window open?

[@enzobrand571]

Yeah, I did, what else could it be?@@MonzonMedia

[@GeorgeLitvine]

Hello and thanks for your cool tutos! I asked the developer to put the ratios' list in a *.json file, as it's in a *.py file that is overwrittent everytime we launch the soft, the ratios I want are always gone. He could also do what was in the mre version, which is a field to enter the ratio we want. However, he doesn't do it. If you're in touch with him, could you, please, ask him to do that, as ratios belong to the basic settings? :)

[@MonzonMedia]

From what I know the developer of the MRE version is offering to help out, let's hope they include this as well. I liked that we could do that in the MRE version. Let's hope he puts it in! 👍

[@Explains-in-a-nutshell]

Hello there, thank you for your video, I've downloaded everything but when I have to start to generate images it says error, is it becuase I don't have an Nvidia GPU?

[@MonzonMedia]

Highly likely, what GPU do you have? I believe it cam run on AMD+Linux. But yeah NVidia is preferred and best to use.

[@Explains-in-a-nutshell]

@@MonzonMedia I have an Intel HD graphics 620, with 2GB GPU

[@MonzonMedia]

@@Explains-in-a-nutshell Yeah unfortunately fooocus needs a dedicated GPU to run. This is very common for any stable diffusion platform

[@LiberationPlayer]

how do you download this on mac

[@MonzonMedia]

Check the link in the description to the github page, further down are instructions to install for M1 or M2 mac. Unfortunately I don't own one so I'm not sure how it is.

[@falsettones]

Correct me if I'm wrong, but this is AI, right? All I can think about is the #YearBookAI . XD

[@MonzonMedia]

hahaha yes that's right bud, this is just another stable diffusion platform. Same stuff you see me do on the other videos. 👍

[@nordic2818]

how tf do you open this after you opened run.bat and it finished doing everything

[@MonzonMedia]

Does it not autolaunch your browser? If not look on the command window for a numerical url something like 127.0.0.1:7860/. Paste that in your browser and save it as a favorite and keep the command window open while using it.

[@nordic2818]

@@MonzonMedia legend. That did it. Much appreciated

[@MonzonMedia]

@@nordic2818 Awesome! However it should auto launch for you. Let me look around to see if there is something you're missing in maybe a configuration file. I haven't had an issue personally but I'm sure others have.

[@sonyhcr96e]

I don't really get how to install on Mac

[@MonzonMedia]

Sorry I don't have a mac to show you either. You can try their github discussion board or reddit. github.com/lllyasviel/Fooocus/discussions

[@mikec.4811]

Where can you download loras and models?

[@MonzonMedia]

civitai is the main place that most people go civitai.com/

[@davids8859]

Is it the exact same process for Mac M2?

[@MonzonMedia]

On the github install page is directions for M2 Mac. Unfortunately I can't tell you since I'm on PC. You can always ask questions on the discussion tab on the same page. github.com/lllyasviel/Fooocus

[@davids8859]

@@MonzonMedia Very kind of you to reply! Much appreciated 👍

[@aakash185]

after submitting the prompt it gives connection time out error ,plss help

[@MonzonMedia]

Make sure you keep the command window open. It needs to stay open while you use it.

[@aakash185]

@@MonzonMedia yeah i am not closing it ,still the problem persists

[@PreciousEyeballs]

Does this work on an AMD Graphics card?

[@MonzonMedia]

Yes there are instructions for AMD cards in the link in the description. Same process as this install but there are some extra steps.

[@PreciousEyeballs]

@@MonzonMedia Wow! That's great! Thank you! 😍

[@JieTie]

I'm testing Fooocus, but it's melting my computer (32GB RAM, Ryzen 9 5900, Radeon 6800XT). Temperatures are off the charts, I can boil water on my GPU. There were a few times when the computer just shut down and I wondered if it would restart. Any ideas on how I can slow down Fooocus to render a little longer but not burn my computer to the ground? :)

[@MonzonMedia]

So it definitely takes a lot of GPU processing but it doesn't sound like it's a Fooocus issue, more like your system. I also don't think it runs too well on an AMD card, might not be optimized for it.

[@JieTie]

@@MonzonMedia thank you for response. I will definetly look more 'outside' of Fooocuse. I know they have poor AMD support (although i ran with edited .bat file they recommend from AMD GPUs). Maybe speed up the fans or undervolt GPU... Btw; great channel.

[@muafaa]

can it installed on mac?

[@MonzonMedia]

Yes on M1/M2 but be sure to read the install section on mac github.com/lllyasviel/Fooocus

[@LifeEnjoyer_]

I got a pretty good pc, but idk why the loading to generate an image is pretty freakin long… If anyone can tell me why I’ll love it For info : I’m on windows 11

[@MonzonMedia]

What are the specs of your computer? GPU, system ram, processor and where focus is installed is it an SSD, M.2 drive or mechanical HD?

[@cheicksylla8891]

hello how to remove it?

[@MonzonMedia]

Just delete the main Fooocus folder. 👍

[@cheicksylla8891]

@@MonzonMedia thank you

[@ShadabAsg]

thanks i hope my pc meet minimum requirement

[@MonzonMedia]

You can check here, just scroll further down for system requirements github.com/lllyasviel/Fooocus

[@GaryScottPhotographer]

After all that it is saying I need Nvidia drivers. Wish I had known that before I downloaded over 6 gig

[@MonzonMedia]

I do mention in the description that an Nvidia card is required for this type of installation. Also on the installation page are clear instructions on how to install for other systems and GPU's. Always read the install instructions and minimum requirements before you install anything open source.

[@GaryScottPhotographer]

@@MonzonMedia My bad. I apologise . I have just bought this PC and it will run graphics intensive games like COD. I just assumed the PC would run this as well. Looks like the graphics are built into the motherboard. Oh well. Thank you anyway

[@MonzonMedia]

No worries. Anything AI related is best with a dedicated Nvidia gpu at the moment. Theoretically you can run it on a cpu but It will be super slow and not recommended.

[@nssdesigns]

ERROR seems my GPU driver is too old

[@MonzonMedia]

What gpu do you have?

[@nssdesigns]

@@MonzonMedia NVIDIA GeForce 3050 Laptop GPU

[@nssdesigns]

@@MonzonMedia love your channel by the way, best AI reference channel so far

[@MonzonMedia]

Hhmmm try downloading the latest driver from the main Nvidia site. Should work on your gpu. Of all else fails head k we to the focus GitHub discussion board and see if they can help you. Link in the description.

[@MonzonMedia]

I appreciate that man, means a lot to me 👍🏼

[@Indiagaming101]

Please make a video on how can i mine bitcoin profitably with which setup?

[@alikokutay7946]

I'm using a amd gpu(rx6600) and i follow the downloading document it says in the doc"Windows(AMD GPUs) Same with Windows. Download the software, edit the content of run.bat as: .\python_embeded\python.exe -m pip uninstall torch torchvision torchaudio torchtext functorch xformers -y .\python_embeded\python.exe -m pip install torch-directml .\python_embeded\python.exe -s Fooocus\entry_with_update.py --directml pause Then run the run.bat." and i editted then run it. but i having a error(Device type privateuseone is not supported for torch.Generator() api.) How can i fix this???

[@MonzonMedia]

Sorry my friend, I don't have an AMD card so I wouldn't know. Perhaps you can try the discussions on the fooocus git hub or even reddit. github.com/lllyasviel/Fooocus/discussions

[@alikokutay7946]

thanks bro i'll check the link.@@MonzonMedia keep making videos plzz.

[@ImPakro]

Hi, thanks for the nice tutorial. Sadly when i try to run the .bat i get the following lines (some of it is in german, it basicly says access denied) Do you have an idea how to solve it?: C:\Program Files\Fooocus>.\python_embeded\python.exe -s Fooocus\entry_with_update.py Update failed. failed to create temporary file 'C:/Program Files/Fooocus/Fooocus/.git/objects/pack/pack_git2_c4000dd91e95f236': Zugriff verweigert Update succeeded. [System ARGV] ['Fooocus\\entry_with_update.py'] Traceback (most recent call last): File "C:\Program Files\Fooocus\Fooocus\entry_with_update.py", line 46, in from launch import * File "C:\Program Files\Fooocus\Fooocus\launch.py", line 24, in from modules.config import path_checkpoints, path_loras, path_vae_approx, path_fooocus_expansion, \ File "C:\Program Files\Fooocus\Fooocus\modules\config.py", line 128, in path_outputs = get_dir_or_set_default('path_outputs', '../outputs/') File "C:\Program Files\Fooocus\Fooocus\modules\config.py", line 114, in get_dir_or_set_default os.makedirs(dp, exist_ok=True) File "os.py", line 225, in makedirs PermissionError: [WinError 5] Zugriff verweigert: 'C:\\Program Files\\Fooocus\\Fooocus\\outputs'

[@MonzonMedia]

What graphics card do you have?

[@raphaelnickel5738]

I got the same Problem@@MonzonMedia