I recommend flushing your engine with this kit from BG before changing your VCT solenoids- amzn.to/2nsfvBT
@rachelejohnson16047 жыл бұрын
I just changed my VCT solenoids...can I still flush with this kit? Will it cause additional problems
@pattywalker75976 жыл бұрын
FordTechMakuloco what's your take on cam phaser lockouts, on a 4.6, 3 valve do they decrease hp or throw codes
@pattywalker75976 жыл бұрын
FordTechMakuloco please explain cam phaser lockouts, do or not good or bad I'd really appreciate your opinion on this topic. 4.6 3 valve
@haxxorsheep6 жыл бұрын
I wish you lived by me. I'd pay you to work on my truck. Every shop I go do not fix it or they make worse and charge me way to much.
@gueroflores14675 жыл бұрын
FordTechMaculoco will bad vct selenoids cause some kind of bogg to your engine I got the 5.4 3v ..put new timing kit new phasers cams lifters too both sides and it's doing that bogging at 1600rpm or 2000rpm once I push on the gas pedal it will act normal I got no engine codes yet
@newcoyote6 жыл бұрын
This is definitely something to look into before doing a full timing and phaser job. My truck was making the same sound and symptoms. I took it to a shop and they said cam phasers. "Oh yup! 100% for sure." and quoted me an absurd $4500. I looked into it more on my own and changed the VCT solenoids myself and presto! Solved. I'm not saying everyone will get lucky and have such an easy fix but it is worth looking at first. Be vigilant and get properly diagnosed before shelling out. There are a lot of unskilled shops out there and dishonest ones.
@DavidJackson-zg5my5 жыл бұрын
newcoyote I currently have an issue and I was also thinking of changing the VCT solenoids prior to doing a full timing job. I was wondering what signs and symptoms you were having. I’ve got the classic where everything seems fine until warmup, then a miss develops, rough idle, then under load on the highway a miss is present as well. Codes I’m getting are bank 2 P0345 and sometimes P0349 which are all associated with the cam phasers as you know. Hope to hear back from you...
@SangheiliSpecOp3 жыл бұрын
Even if it was the phasers, 4,500 is a number they are pulling out of their asses lol. I could buy four 4.6L engines (I drive a mustang) for that money lmao
@josephgarza25862 жыл бұрын
Most of em are fucking scumbags str8 thief trash they make me sick
@hunterprice2872 жыл бұрын
@@DavidJackson-zg5my what did your issue ended up beingp
@kstevenson186 Жыл бұрын
Was your truck dying when you came to a stop
@juanagudelo409 Жыл бұрын
This is exactly the same sound that my 2006 F150 5.4L is making. I thought i needed a new engine! Thank you so much for the video! You are a blessing.
@MrMobileAutoService Жыл бұрын
Excellent video and information. We did an oil change to one of these engines the other day. Our customer is really good about maintenance and we always add Rislone engine oil treatment to these engines as a safeguard. Even so he had a problem with one of his valves shortly after the LOF. We dispatched a tech to his home with two valves in hand. He's been fine ever since. Only 116,000 miles on the engine. Thanks for your video.
@_kvngmilton_55223 жыл бұрын
You are one of the Most helpful souls on earth I think u just fixed my 3 days of stress I don’t know yet haven’t tried this but I also have another vehicle reply and ile give you the details
@moneymakin_ro94862 жыл бұрын
My 06 mustang gt has been doing that loud knocking noise after driving for 10-15 minunte!! And all of the mechanics kept saying my timing was good! Wow im happy as ever i seen this !
@michaelbefumo-qg7ji Жыл бұрын
Yes especially when it's hot cam phasers will make more noise hot, a lot of people don't know about these what the cam phasers and the solenoids that controlling
@barringtonsmith9147 Жыл бұрын
I'm not car savvy but with great vids like this you get to understand why you get a check engine light and a P0011 code
@mrfixit98322 жыл бұрын
Your videos are very good! I Disassembled my solenoids and wet sanded the plungers with emery cloth, stretch the spring out so it would be stronger, oiled them and reassembled and runs great now, thank you!!!!
@rodhawkins50372 жыл бұрын
Interesting, how's that holding up?
@siliconvalleyengineer58753 жыл бұрын
I just change both of my 2009 Expeditions 5.4L VCT solenoids, per your recommendation I installed Ford VCT's. Getting the valve covers off was really a hassle because of all the hoses and electrical in the way. I took the Expedition for a drive after the new installations and it had excellent engine throttle response / power and acceleration. I had to redo the passengers side valve cover gasket, it leaked but now everything is good.
@UserUser14880 Жыл бұрын
Only symptom i have is after battery reconnnect and relearn process. Coming to a stop it down shifts hard and sometimes wants to die. I purchassd vct valve bc i too have a valve cover gasket leak on pass side lol. So if i replace 1 might aswell do both. And while im in there. Change the vct.
@robertrpenny Жыл бұрын
Ford should give a free 5.0l engine to everybody that owns 3V junk. And install for free. Them Tritons are nuff to make you loco.
@35ariman2 ай бұрын
Amen!!! I have an 09 f150 and it runs great but I’ve had to do some work to it
@bobbyhempel15132 ай бұрын
I've got a 2010 F-150 with the 4.6 3v and it's got over 220,000 miles and just started having this issue. I've heard of worse problems with the 5.0 at less miles.
@Painnazzautorepair21 күн бұрын
Here a free slightly less junk motor to replace the 3v major piece of shtt
@spelunkerd6 жыл бұрын
How do you tell the difference between a vehicle that has a bad VCT solenoid compared to one that needs new phasers or timing chain? Do they present in the same way, with different trouble codes?
@grantrose36254 жыл бұрын
I have a Ford F-150 2006. I be changed the cam sensors and VCT solenoid last year it went smooth for about 2 months. The past it it’s been running rough and dragging when accelerating hard to get too speed. I removed the valve covered and timing cover. One of the guides and tensioner were broke. I changed the timing chain and guides the same way as in you videos but it runs but dies when I slow down. My truck has 202,000km on it.
@thuglivintv8242 жыл бұрын
Did you fix it?
@hoddy200111 ай бұрын
what's curious to me is that at the point where the VCT gets stuck advanced at 5:37, the sensors are sending VCTADV around 0 and VCTADVERR also around 0. Just prior to that you can see the VCTADVERR walking left and hits the O (out of limit) and then returns to zero. I would have thought the out of limit circle would have remained blue on VCTADVERR. Thanks for all your contributions my man we appreciate you
@anadavidf61632 жыл бұрын
Thank you. This video confirmed that my engine does this because it sounds just like this.
@HazardWolfCorp Жыл бұрын
Can this cause a rough idle with NO code but when driving everything seems fine?
@rockerbigjoe57112 ай бұрын
Why does mine only do It in reverse pushing a load.?
@KT-hz4oh7 жыл бұрын
First of all thank you for your videos they have helped out so much! I recently had all the timing replaced on my 5.4. I have drove it around forty miles since it was replaced and today I got a p0022 bank 2 code. Where do I go from here? Oil pump, cam position sensor or something else?
@AB676 жыл бұрын
I did the same on a 4.6 and the same codes came back, P0010 and P0020, truck seems to runs okay, just has been worse on gas mileage. I have no clue what else to do now?! I need a solution!
@Dayalalito0014 жыл бұрын
@@AB67 i junked mine
@JLH_LetsPlay Жыл бұрын
After I poured some thick engine treatment into my Edge, I guess it got into the valve and kept it from functioning properly because the engine light came on and it was shaking bad. After I drove it a while it straightened itself out and it runs great now.......no issues.
@rrmech118 жыл бұрын
Excellent explanation of the operation of the solenoid Brian. How much is the IDS scan tool?
@ozzstars_cars8 жыл бұрын
good video. I don't understand how the software is allowing you to see the data of both solenoids with them unplugged. Is the camshaft sensor data what we are actually looking at for the timing values? Thanks
@FordTechMakuloco8 жыл бұрын
+Ozzstar yes
@andrewwebb507 Жыл бұрын
Have you ever had one not run very well after it warms up? I have replaced everything plus the Mel high flow oil pump. I have a scan with HP Tuners from a cold start. When it hits 152° coolant temp, the timing goes crazy. Then stft’s go nuts also.
@reggienoble5714 ай бұрын
When bench testing my original Ford VCT's and new Amazon VCT's neither open very far. I'm applying 12v. You can hear the solenoid actuate, but it just barely moves. In the opening, how far should I see the valve move?
@hoddy200111 ай бұрын
another question: with the vct disconnected, what is generating the force to move the valve inside the solenoid against the spring? Normally it is the electromagnetic force from the solenoid that will push it down against the spring, but how is it moving down against the spring on its own? I could see if the spring was completely broken or missing that it could fall down by gravity. Is there oil flow within the vct valve body that moves it?
@clmkc53939 ай бұрын
I have a 2015 Ford Explorer Limited. I needed to replace the Variable Valve Timing Solenoid (VVT). The Solenoid was "stuck" in the housing. I was eventually able to remove the solenoid. However, in doing so, i broke off the flange ear on the VVT housing. This is where the bolt goes in that holds the solenoid in place. I need to purchase a new/used VVT housing bracket. Its a separate piece above the timing chain. Do you know what you call this VVT housing bracket or mount? I cannot find the proper name for the housing and need this to complete the job. Really appreciate any assistance here.
@johngoss5525 Жыл бұрын
Hey bud like your channel great stuff do the 2004 5.4 f150 have a pcv I'm having trouble finding mine
@MrFerrill7 жыл бұрын
You got all the intel on these 4.6 5.4 engines 👏🏼... I got 269k on my platinum and starting to have some issues and a couple "mechanics" just want to start throwing 20 different parts at it. I have a huge loss of power, mpg dropped, slight ticking (maybe tick has always been there just notice more now), No codes, smooth start and idle, any ideas? Oil replaced about 3 months ago 10w-30 synthetic I believe, any help would be much appreciated
@GlossyLake6 жыл бұрын
Alfred Ferrill did you ever get those problems taken care of? And if so what was the solution??
@michaelbefumo-qg7ji Жыл бұрын
I unplug my solenoids and you just heavy wire from the battery post to their solenoid and shocked it even sending power the wrong way the song it's just click click the solenoid immediately started running smooth mine happens to be the driver side, I couldn't believe it cost me a dollar and I was about to do a timing😅 and it still running great and that was 6 months ago these 3-valve 5.4 Triton have to change the oil nv4500 miles at most with good oil
@rileycrowley77217 жыл бұрын
Thanks for all the great videos. I went through and did the complete timing on my 04 fx4. Unfortunately I still have an issue with some sticking valves. Do you have any cheap or easy ideas for that before I tear it all apart again?
@nfsking4826 Жыл бұрын
Did you put out the rocker arms on passenger side?
@nickad555 жыл бұрын
HI, i have a 5.4 engine with the code p0012, would this code be able to let the computer turn off the spark to one cylinder. i have been told the computer could save he engine by turning off , cylinder deactivation, to save the engine. than you jim
@danielangeles49536 жыл бұрын
I did the chains two times with the same code p0022 i also replace the soleniods but i got them from the autoparts
@anadavidf61632 жыл бұрын
Do you have a video where you have to remove valve cover on passenger side? I have to disconnect AC line as well and I'm no mechanic. I only see the easy replace or removed engine vids.
@VitaminE-822 жыл бұрын
I have an 05 F-150 with 5.4 triton. I'm showing error codes P0349, P0345, & P0022. My truck has been having a rough idle so I after I researched I noticed VCT solenoid. I disconnected the solenoid it ran fine. I ordered a new VCT solenoid replaced it and now it back to the rough idle after slowing down. Is there a secondary VCT or could it be the sensor?
@cotynietling25674 ай бұрын
I put two brand new vvt solenoids in and new oil and oil filter nd now my truck runs way worse violently shakes and you try to drive it and it bogs down has a metalic rattle at 40 to 45 it bucks and surges any ideas
@ashleyroberts49044 жыл бұрын
Great video helped me solve my issue
@timbroom23282 жыл бұрын
I have a 2009 f150 with the 5.4. Had some issues leading me to believe it's bad vct. Took the one from bank two and found metal shavings. Does this mean my engine is shot?
@iron4577 Жыл бұрын
Is it possible the new oem can be faulty? Cause I change mine when in a month and just started keeping tuck open but only when it’s hot and it’s happens once a while
@laschell592 жыл бұрын
My neighbor just told me this was my problem. I bought 2 new ones and DAM IT runs again 😁
@maseton13678 жыл бұрын
are the F-150 5.4 3v vct solenoids different from a F-250 5.4l 3v super duty and if so what would happend if u do get them mistaken?
@matthewdickson2132 жыл бұрын
I have a 2007 f-150 with the 5.4 3v the truck runs good and has plenty of power when cold as soon as it hits operating temperature it gets very sluggish and it is hard to keep a consistent speed without down shifting it is throwing a code saying that the timing is over advanced on both cams any idea what could cause that?
@bobbyhempel15132 ай бұрын
My truck started doing that but the code was for the bank2 cam shaft position sensor so I replaced it and about 30 miles later it did it again but never threw up a code and hasn't done it again. 225,000 miles on a 4.6 3v.
@gordonmohamed48862 жыл бұрын
I do learn slot from your videos but I have a problem with my 2011 navigator 5.4 when hot and when I put in reverse the engine start shaking I have to put it in park or neutral and step on the gas to clear it. I took it to the mechanic and changed the crankshaft position position sensor driver side. That didn’t help I change the oil and filter and still have same problem can you advise
@jeremystewart21002 күн бұрын
Would I still have to time it if I change vvt ?
@madmodsgarage11794 жыл бұрын
hello! what is the vct solenoid frequency for a 4.6 3v from mustang gt 2005-2009? Engine runs on standalone ecu, I'm trying to run the vct system
@GlossyLake6 жыл бұрын
I just replaced all the spark plugs and the truck is running much better than when I bought it with 250,000kms (155,000 miles) on it. I don't have any codes but in Park, Neutral, and while stopped in Drive, the truck idles rough! Anything like this you've experienced? And would replacing the VCT solenoid help?
@deloevans58963 жыл бұрын
Have you ever seen the vct solenoid housing gasket go bad and leak oil should I change it out?
@russellfoote39106 жыл бұрын
'98 F150 5.4 Aluminum intake manifold. I just changed heater core. Then the piece that the coolant temp sensor screws into (behind the alternator) and it screws into front intake manifold crossover, because the 1/4 tube that a coolant hose goes on was rusted and leaking. No more leaks, but Now the engine is shaking and no response on acceleration. Starts right up and no problem at stop light. Ran like a champ before I worked on it. Any advice? Also have a p0001 code
@blackstonshingaling8 жыл бұрын
Does this mean in actuality that the unit needed to be cleaned and a new spring put in?
@randyragon8 жыл бұрын
+Blackaboe With that many miles the magnets can also become weak and not move the piston correctly. I have rebuilt one before, as a temp fix back when there was a shortage of new ones. It made it three weeks before it started acting up again. And I have used after market generic that didn't last a year. Always replace and use the quality ones Brian is recommending.
@MrFafolaktik2 жыл бұрын
Thank you for the great explanations as always. Unlike many tubers who just show how to replace parts, you actually help us understand if it needs to be replaced in the first place and how as well. Thank you for all the help. 2008 F250 3v 5.4L owner.
@riding2nowhereАй бұрын
I got a 2010 f150 I unhooked the vct on bank 1 and 2. Drove around a couple days. Hooked the vct back up, it started and then died. Unhooked them again, now trys to start but won't. What happened???😢
@giovanicoelho37728 жыл бұрын
Hi FTM. I hope you are well. First of all, I would like to congratulate you for this work. It's helps me a lot. Keep this work! Thanks to you I could change the spark plugs and vct solenoids of my 2010 Ford Edge with no issues. Thank you very much. Do you have any contact (email) that I can use for any questions/help? Take care! Cheers
@BrFishWPB3 жыл бұрын
I have a 2004 F150 with the 3V and when I follow you link to amazon, they say it will not fit my truck. i can't seem to find the OEM parts online for the 2004
@TheMarky263 жыл бұрын
Dang i think thats what's going on with my 4.6 explorer..Will just replacing the solenoids fix the problem?
@j.r.65043 жыл бұрын
Please help my truck 2006 5.4l 3v have this code P0012 it started today engine light flashing when I bought it oil was coming out of the dipstick. That was 2 weeks ago I got the Vct selenoids replaced and that fixed the problem with the oil coming out of the dipstick. But now the engine light is flashing with code p0012 no clicking sound.. it drives good it only does it from time to time it vibrates at times during the day. And it also showing code p0430 Cat I was told it might need the timing chain replace. But I don’t heard no ticking noise. Truck shows 55,000 miles. With carfax history. I’m hoping they are original miles.
@andrewedds43866 жыл бұрын
In this video you mentioned a method for testing alternators. Do you have a video on this. Vehicle in question is a 2005 f150 4.6l
@landonblaylock73245 жыл бұрын
I had a question I did my timing and everything and it runs great but when it gets warmed up it gets a hesitating a cutting out then after awhile it gets a p0011 I believe it has a new dorman Vtc solenoid could that be my problem cause my timing set and cam phasers are from ford should I go with ford solenoids
@Metalbass19794 жыл бұрын
Exact same thing happening to me! Did you get the problem solved?
@agsolis373 жыл бұрын
@@Metalbass1979 did you figure out the problem? I’m having the same issues. Already replaced phasers chains and the guide rods. Running out of options. This is my second engine. The original only lasted 135k miles. The engine it has now is a crate engine purchased from a Ford dealership. It only lasted 65k miles.
@Metalbass19793 жыл бұрын
@@agsolis37 Unfortunately, no. The thing totally siezed up on me and I haven't had a chance to mess with it. I'm going to try again this Saturday.
@robc34916 жыл бұрын
2007 ford expedition leaking oil from both solenoids do i need to remove the cover in order to replace solenoid or can i replace seal and solenoid without removing cover?
@Chrisrobba2 жыл бұрын
My truck starts and idles fine but after it warms up the worse it sounds and drives. Sounds similar to the noise here, is it a good possibility this is my issue? 200k miles 04 f150 5.4, can I clean these just to get a idea if they are sticking? I don’t have a scanner unit.
@erix73122 жыл бұрын
Does the 1998 cobra have a vct been searching around and there’s rarely any info on the sn95 cobras
@pauln21774 жыл бұрын
My 2007 f150 5.4 sometimes the engine will start shaking and hard knocking when backing up or come to a stop..us it vct or cam phaser
@Wolf-qy7ri4 жыл бұрын
Paul N I have experienced the same problem on my 2007 did you find the culprit?
@miguelgarcia31784 жыл бұрын
Hey teck mine randomly turns off if you dont put gas so on stop sigh i have to put the brake and a little gas so it wont turn off
@chiefpipelayer267 жыл бұрын
FordTechMakuloco, I have a 2004 F150 new body style 5.4 3v, the VCT solenoids you reference says its not compatible with my vehicle. These appear to be the same only the updated version (8L3Z-6M280-B), will these fit my specific year or am I missing something and need 8L3Z-6M280-A?
@jimmacris6158 жыл бұрын
great video.... a ford owner (3v 5.4) and I watch as many videos as possible. thanks for all the hard work in producing the videos. Is possible for these to go bad w/o the pcm throwing a code?
@FordTechMakuloco8 жыл бұрын
+Jim Macris the timing is constantly being watch so if it sticks for a period of time and the it is outside the tolerances then it will set a light after two consecutive key cycle failures.
@hughnelson50797 жыл бұрын
Jim Macris O
@odin04254 жыл бұрын
Old video, but new question. I bought a 08 F150 with a V8 Triton engine. When i test drove it, everything was perfect. It drove fine for a few days under normal use. 4 days or so after owning it i was parking it, backing up, pulling forward, normal parking behavior. My engine started shaking badly when stopping, but gaining power again while advancing. I am trying to figure out if it is the VCT solenoid, or the Phasers going out. At normal Idol, i don't really hear any diesel noises. I have also noticed that this only comes up when the engine is up to temp, and that when i disconnect the VCT solenoids the engine purs just fine and there is no real problem. (just a lack of power). So agian, i must ask, is it the phasers or vct solenoid? Second question, If i leave the solenoid disconnected will i end up damaging the phasers, or timing system? This is my first "real" vehicle so im getting nervous about it. I've always just drove junky cars that would last a few years before i bought a new one. This one I actually have several thousand dollars to pay off. Any help from anyone would be apriciated.
@443red4 жыл бұрын
How did you make out with your 08 f150?
@443red4 жыл бұрын
Mine is doing the same thing with a code P0012,I am going to replace the vvt solenoid
@odin04254 жыл бұрын
@@443red I replaced the drivers side solenoid as my code was related to it, and I can still hear it although much reduced and may be from passenger side, but ya the truck runs much better. I plan on doing the passengers side next week. the 07+ F150's you HAVE to remove the valve cover gaskets, so drivers took me about two hours, passengers hopefully will take less unless I have to pull the AC lines. I also went to full synthetic 10-30, and filled to the top of the dipstick line hoping that more pressure can overcome some of this engines short comings.....I was just happy that no plastic or anything like that could be seen in the used oil. Good luck with yours!.
@gingi8013 жыл бұрын
When my truck is idle, bank 2 is right at 13degrees. should it be at 0 when idle? Bank 1 is at 0 on idle
@thewobblysender70487 жыл бұрын
I'm stumped. Got in my 06 expedition 5.4 started it up and it would barely idle. Pinged, backfired and knocked under load. Scanner showed bank 1 timing way advanced at idle. Unplugged bank1 vct no change. Replaced VCT and truck now runs and timing is normal but rough idle with no power. Getting 8mpg and the only code that comes up is p0171. Bank 1 lean. Changed intake manifold, bank1 injectors, plugs, coils, still no change. Cats check out fine. The darn thing was running perfect prior. I cant figure it out. Any help would be greatly appreciated. Thanks
@Elvergalargax7 жыл бұрын
what do you think on 2007 f150 5.4 . was running good and after replacing the vct on driver side I see those codes and engine shake and make noise like a popcorn w rev , and smell Very bad , what do you think , I might forget do something? (no codes)
@hunterrieger72692 жыл бұрын
My f150 08 5.4L has a rough idle and low rpm. When I’m in reverse or going forward to parallel park it shakes and rattles and sounds like it’s going to stall. It sounds just like the issue in this video
@bobr72066 жыл бұрын
Hey man I just realized the other day that there is all kinds of info on instrumental cluster digital rpm,coolant temp,digital speedo,dtc codes etc. I have an 05 f150 can you do a video explaining what the 30 or so different things are and what everything means
@abcardenas356 жыл бұрын
Would the VCT solenoids create a multi misfire on 2 3 and 4 Bank 1 or were the cam phasers to that
@TheHarleyross8 жыл бұрын
i have a 2007 f150 5.4L approx. 170k miles and i have to do the solenoids for sure. i don't have allot of expendable income, but would also like to do the job correctly the first time. Would you recommend that i just go ahead and do the cam phasers at the same time or not mess with what (i don't think) is broke (yet)
@christophermedonca81654 жыл бұрын
I got a problem when i floor it once i get near shifting rpm it wont shift for like a few seconds should i flush the trans fluid ?
@kevinammons27994 жыл бұрын
The link for the ford vct solenoid says it's for 5.4 but will they work for the 4.6 3valve for 05 mustang gt?
@geraldwalker20672 жыл бұрын
I have a 05 f150 with a4.6 and it lost all power it has around 240,000 miles they changed coil packs and spark plugs and still cannot get more than 5 mph out of it eve at full throttle and it also has no catalytic converters due to being stolen off of it plugged it into a scanner and couldn't get no codes to come up and also tried to reset the computer but taking off the battery terminal and no change trying to find out what to do next
@amtpdb18 жыл бұрын
I have a 5.4l 2004. Could these failing cause the mileage to lowering as the cams don't advance? The best mileage I see is 11-12 on the freeway empty! 9or 10 on the street. Thanks for the videos.
@amtpdb18 жыл бұрын
+amtpdb1 Forgot to say only 125,000 miles on it.
@FordTechMakuloco8 жыл бұрын
+amtpdb1 if it is not advancing the timing you will know it as the timing is constantly monitored for emissions reasons. The most common reason for dropping mileage is a skewed input to the PCM, drag on the driveline and restricted cats.
@amtpdb18 жыл бұрын
+FordTechMakuloco Thanks for the information. Have a nice day.
@tedthornton77916 жыл бұрын
amtpdb1 on my 5.4 f150 lariat i get 13.5 anywhere. If i disconnect battery to reset computer, i get 16.8 hwy.
@wendellhendrix47254 жыл бұрын
I have a question for you I have a 2007 gt mustang and I have modded it a little and I’ve changed the timing chains and cam phasers and cams are bigger but not to big after several months it started to idle up and down when you stop at a light then it started rattling so I thought it was the cheaper cam phasers an so I put the lockouts in them and got a tune for it but it still knocks and sounds like a diseal engine , what can it be the vct solenoids? I replaced them when I did the timing chains and cams but they were aftermarket and it does need an oil change. I could use your help please! Thanks in advance
@partsbrothers77766 жыл бұрын
Do these solenoids act up when the vehicle is running at its regular temperature?
@seemeefalcon71603 ай бұрын
You the best man ❤
@Camelfacekamala3 жыл бұрын
So do the 5.0 f150’s never have problems? I don’t think I’ve ever seen you do a 5.0 video
@shawnburton504 жыл бұрын
Hi excellent videos very intuitive. Do you mine telling what diagnostic software you're using in this video. Thanks and keep on keepin on....
@technicalitems7314 жыл бұрын
I am at 280k miles on my 2004 f150 5.4 3v. I want to replace all of the timing components as well as oil pump. But I’d like to start with the VCT for the next 10k miles before I tear the front of the motor down. Mine has a shake at idle. Dies at idle sometimes and dash light shows low oil pressure. Cranks back fine. Has a low idle. Slight miss on hills intermittently(might be the eBay coil packs). I see the amazon link for VCT in description. It’s the correct one for mine? Or are they all the same? I also wants the updated rubber gasket/plug that it uses in the valve cover. Looking to purchase VCTs tonight. Both sides. Link is for 1? Thanks!
@mick57403 ай бұрын
Im back again 4 years later. Need to replace the seals as they are leaking more and more !!
@jonathanwallace99764 жыл бұрын
04 f150 only code po022. Bank 2 replaced vvt solenoid with Ford vvt the truck runs good I flushed the oil with bg epr and changed to motorcraft 5w30 but code want go away and hear rattle in tail pipe especially when accelerating can a clogged cat cause this code to not go away when cleared are is it something else truck drives fine and accelerates fine just the rattle in pipe and the code I’m lost can’t figure it out
@DibroTeam Жыл бұрын
I have one problem. After long driving in high rews when I stopped sometimes engine start working like diesel. After i turn off engine and start it again everting is okay. I don`t have engine code in few months I have P0340.
@josuepocasangre75832 жыл бұрын
Hey can you tell me what scanner are you used ????
@CTRLALTDayman177613 күн бұрын
He's using Forscan. It's a free Ford diagnostic tool on PC, iOS, and Android but you'd need a USB to obII or a Bluetooth adapter
@coyote505853 жыл бұрын
There are so many VCT solenoids on the market. Can I use aftermarket brand VCT valves like melling or gates and will it be ok? I know the Ford Parts are the best but I can get the aftermarket mentioned locally and half the price.
@mrc50982 жыл бұрын
Don’t do that
@jacobcarr30787 жыл бұрын
I'm getting both of these codes on my 2004 f150. I have done a engine flush and changed both vct solenoids and I'm still getting these codes. Not to sure but It seems to have p0012 at idle and p0011 while driving. Had the oil pressure checked and they said it had good pressure so not sure what to do next. Can you give me any advice. It has a really rough idle.
@thuglivintv8242 жыл бұрын
Did you fix it?
@jacobcarr30782 жыл бұрын
@@thuglivintv824 yes I had to change out the cam phasers
@TRYHaRDproductionz694 жыл бұрын
I replaced one and it runs good now. (Drivers side) should I replaced the passenger side vct now? or no..
@rmast54003 жыл бұрын
Hey,,great details never considered in my case.
@petemeraz34644 жыл бұрын
@fordtechmakuloco I changed out my vct solenoids. Now I don’t have any brakes also it’s is now shaking when it didn’t before. Could you give me any clues on what it could be. Thanks
@FordTechMakuloco4 жыл бұрын
Brake booster hose fell off of the intake side
@petemeraz34644 жыл бұрын
@FordTechMakuloco yeah i found it thanks for the heads up and help, now I just need to put it back on. All I’ve read is I need to pull the intake to hook it back up please tell me that it not the only way.
@petemeraz34644 жыл бұрын
@FordTechMakuloco ok got it back on and the truck runs amazing never felt her have this much power. Thanks you are awesome
@douglasvalverde33383 жыл бұрын
help me I have mazda cx7 year 2008 the engine was rectified and now the p0012 is not removed
@hgallegos9154 жыл бұрын
I have bank 2 over advanced. Replaced everything. Oem parts.. except oil pump. Updated Ford phasers. My engine has small vct sensor covers. :( Replaced just one.
@71manny894 жыл бұрын
Can someone give me some insight on this issue. I have a 2006 expo 5.4 3v. I got a code for p0012 and p0420. At first didn't feel much difference except for one time it felt shaky like it wanted to jump. I changed the both vct with ford parts. Surprising the bank 2 had a torn scene stuck in the port but never got a code for it. I changed oil and the truck drove great. Code p0420 went away but p0012 keeps coming up pending disappears then comes back. Truck makes no sounds from phasers. It sounds good idles at 750 with no problems. Although I feel like if I floor it it has a second of hesitation. Any thoughts?
@stephenvilcot92087 жыл бұрын
First, Thank you for some amazingly informative videos. They have saved my butt more than a few times. But now I have a new problem that I haven't found a specific video for, unless I'm missing it. I changed my vct solenoids a year ago with oem parts, as well as cps at the same time. Truck ran fantastic up until this week. It idles rough, runs fine (although it seems underpowered), and then starts running rough again when it shifts into overdrive and runs about 12-1700 rpm. I'm getting a p0172 and p0012 codes. Is it time for phasers or could somethin else be causing these problems? Thank you again for saving me time and money. Stephen
@FordTechMakuloco7 жыл бұрын
Check oil pressure first if it is low you can have erratic vct operation and these codes.
@justinirwin78813 жыл бұрын
I've got code p0012 on a 2010 5.4 l 3 valve do you think it's something to do with the solenoids?
@togodbetheglory97257 жыл бұрын
I have a ford f 150 2004 the engine light came on the code shows P0012 wich is the camshaft solenoid. But also Mecanics saying that it could be the camshaft
@jasonashley6046 жыл бұрын
I have a 1999 F150 with the 4.6 L Triton in it does that have the solenoids in it
@MrVovapl6 жыл бұрын
In my Navigator 06 I have Code P0012. Engine shake at all of revolutions. My mechanic check compression and oil pressure, both in norm. Ignition coil and spark plugs are new, vct solenoids too. Coul'd it be jumping timing chain? I dont have any missfire or something like that only one code on PCM. Any sugestion? Car have 114k miles. Check on carfax looks like original. I both it 3 month ago at auto auction, previos owner change all parts i sad beffore and get no results so i thing he sold it. Pleas help me with some ideas, im from Poland so hear is not so popular car and mechanic doesnt know enything about this engine.
@johncarden28235 жыл бұрын
Did a set of these today 2008 ford f150 the clip and the piece above clips are gone springs are still in both but everything else is gone ran a small camera in areas I could get to couldn't see anything anyone else had this happen
@dmoney4225 Жыл бұрын
I recently did timing job and did everything correct with all ford parts. It road well for 500 miles and threw cold for P0012, P0022. So I redid the timing just to make sure I didn’t do anything wrong. I bought VCT from Autozone. Once it was back together it continued to run rough. Me being dumb I redid the timing for the 3rd and replaced the VCT with Ford and it still throwing P0012, P0022 codes. I don’t know what else to do. All Ford parts being done correctly shouldn’t give me so many problems.
@FordTechMakuloco Жыл бұрын
You have oil pressure and volume issues, first step is a high volume oil pump Melling M340HV, make sure the oil pickup is clear and run 5w-30. If all of that fails run 5w-40.
@dmoney4225 Жыл бұрын
@@FordTechMakuloco thank you. I forgot to mentioned I replaced the oil pump with the HV pump you recommended. I will change to 5w40 and hope for the best.
@18winsagin6 ай бұрын
Mine does it low rpm and especially backing up slowly. It really raises hell til I rev it up .
@justinocamb14106 жыл бұрын
I put new solenoids in and now 4months later I’m getting this problem. I had it before where it would stall out. New vct seemed to stop that. Of course I did cam phaser. Chains and guides. Is it possible to have one go bad after 4 months. I put a less expensive one in
@BadBellyBlues6 жыл бұрын
I did the same thing on my 2004, new cam phasers, timing chains, oil pump. After about 8 months it seemed to go back to the original running problem. Several months of repeated solenoid failure engine codes after installing 2 new ones. finally switched to 10-30 oil and the problems went away. the car runs great now. 127k miles. It was always my guess that my oil pressure was lowering as the car got to run temp. Thats when the problems would always start after several minutes of running and getting to temp.