Ford 7.3 Powerstroke Common problems Part 2: Fuel Bowl

Going over common Problems with the stock fuel bowl on 7.3 Powerstroke. OBS fuel bowls are different than Super Duty fuel bowls.
Billet Fuel Pressure Regulator: amzn.to/3mmugFV
Performance Upgrades:
KC Turbo: kcturbos.com/c...
Pusher Intake: amzn.to/2Y661zn
S&B Intake: amzn.to/2PdVb63
CNC Lines: cncfab.us/i-30...
Hydra Chip: 1023diesel.com...
AIH Delete Plug: www.riffraffdi...
4" Exhaust: amzn.to/2VItdjR
CNC Oil Crossover: cncfab.us/i-30...
Edge CTS Insight: amzn.to/2ErkHQl
Window Mount: amzn.to/2EqiLHO
EGT probe: amzn.to/2EsHF9O
Pressure Sensor: amzn.to/2wd472h
Sensor dongle: amzn.to/2WoEees
Fuel System:
CNC 4 line kit: cncfab.us/i-30...
CNC Fuel bowl delete block: cncfab.us/i-30...
Airdog 165: amzn.to/2M41RoY
Fuel Pressure Regulator: amzn.to/2Y6Lz17
Fuel Tank Sump: amzn.to/2M7JjnE
Stage 1 Injectors: www.riffraffdi...
Cosmetics:
Mishimoto tank: amzn.to/2Tl70tZ
Headlight Assemblys: amzn.to/2B9E2no
Smoked Tail Lights: amzn.to/2Es7PcS
LED Brake Lights: amzn.to/2YJv21L
LED Reverse Lights: amzn.to/2W3gVrz
Smoked Headlights: amzn.to/30GMKFh
Rigid Fog Lights: amzn.to/2M1ar7I
Projector kit: www.theretrofi...
Hostile Sprocket: amzn.to/2Z9SHMH
Goodyear Duratracs: amzn.to/2KLtcIk
Emblems: amzn.to/31eZi68
17+ Tow Mirrors: amzn.to/2xkXJcV
Waterless Wash: amzn.to/2M5GtiT
Interior Upgrades:
Kilmat Sound proofing: amzn.to/2YX4ayo
Kenwood Speakers: amzn.to/3eXAw1r
Pioneer Head Unit: amzn.to/3isowHx
Tools:
Milwaukee 3/8 Ratchet: amzn.to/3cFvyEK
Milwaukee Impact Wrench: amzn.to/3eYKGPe
TEKTON 12pt Socket Set: amzn.to/3eYfWh7
¾” Drive Impact Socket Set: amzn.to/2ALqH7P
Polisher: amzn.to/33iUP4e
Camera Gear:
Canon M50: amzn.to/2MBUGl7
Mic: amzn.to/30sazD5
Music:
Nostalgia by Tobu / 7obu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Music promoted by Audio Library • Nostalgia - Tobu (No C...

[@mike94560]

Whats great about this video is that I can see what everything looks like without tearing my truck all apart. Thank you!

[@LivingOnWheels]

That was my goal haha. Glad it helped!

[@jackadamz3]

Love my 2003 crew 7.3. I’ve had since 2008. Best money I ever spent. I got 153,000 on it now.

[@66azannor]

I'm stoked that I found your channel Joe. Thanks for all the great info. Glad to see some 7.3 peeps

[@LivingOnWheels]

I appreciate it!

[@gustavomendoza2552]

@@LivingOnWheels i have a problem in my 1999 f350 diesel there is white smoke and i dont know whats the problem

[@LivingOnWheels]

@@gustavomendoza2552 Need a better description then that. White smoke when it starts, when its idling, all the time, lots of smoke, little haze?

[@gustavomendoza2552]

@@LivingOnWheels the truck start normal runs and drives but white smoke comes out 1st mechanic tell me i was screens i change them and nothing still doing the same then other mechanic tell me the glowplugs and i change them all and nothing the white smoke is when i start and idle also

[@gustavomendoza2552]

Alot of smoke all the time

[@tomdorman2486]

Great video. I think a good subject would be to talk about the challenges of the chair and the fact that your doing difficult mechanical work. It may help us to find ways to work on our trucks with challenging physical impairments. Thanks for sharing your truck.

[@Nick_Sorenson]

I would guess the most common problem with the Fuel Pressure Regulator return fitting may have to do with (over)torque. I know I over-torqued mine and sheered it. I initially (and mistakenly) saw it as a flare fitting (metal to metal connection like in plumbing or brakes) and torqued it good... so it wouldn't leak. After breaking it I realized that it's a rubber compression fitting and really doesn't need much torque. Just pay attention to where the rubber compression gasket in there sat and put it back the same way. I'm sure there's a torque spec but I will just say in my experience... it's a half turn or so beyond finger tight.

[@richardpenning9135]

Wish I found this video before I install my engine Just starting having Starting trouble losing its prime overnight

[@fredwilley5931]

My hats off to you sir. I'm 6'2" and I have to use a step ladder and a cinder block to work under the hood. Good job buddy.

[@erickajander5494]

SIR...you are a PROFESSIONAL ON FORD DIESEL FUEL BOWLS , FUEL LINES , FUEL DRAINS , *4* FEED CYLINDER HEAD FUEL PORTS , FUEL PRESSURE SENSOR ....WISH YOU HAD SHOWN CLOSE-UP MULTI VIEWS OF C.N.C. CUSTOM PART

[@gabrielliss7877]

I have the same year and model as you. I am a somewhat new viewer but i was wondering if you have tips on the next upgrade I should do for my truck. I currently have a 4" straight pipe and an AFE big boost intake. I am 20 and I am trying to learn as much as I can. by the way this is a great video and you have great content on the channel.

[@billmalec]

#30 fuse(Excursion anyway).

[@keithnoneya]

Good info bud. Thanks for sharing. Best Wishes & Blessings. Keith Noneya

[@MRALBERT571]

Great job on the video have watched some before and subscribed while watching the first one like the way you do your videos not yelling and blasting music just straight forward information that most anyone can understand, Best of luck to you!!

[@mattfoley4128]

Great vid. Nice truck. New subscriber here

[@JoseLopez-sh4xg]

Thanks for the information. I have a f350 OBS. I like what you did with your fuel bowl delete, so I'm gonna see if I can do that to mine.

[@twobrotherstowingllc3448]

Awesome video thanks for the info

[@Geoff240ti]

Subscribed. just bought a 90k mile 2001 7.3... I see myself buying many mods on your shopping list. Had a stock 7.3 10 years ago, glad to see people are still loving them!

[@LivingOnWheels]

They are awesome trucks to drive!

[@prestensmithers2576]

Still are in 2023! 🤘🏼

[@rossfricke2010]

Great explanation thanks

[@con-air-flair118]

Easily the best series on 7.3's on YT. Thank you so much

[@bondvagabond42]

He's great, I really like bayou diesel too, if your 7.3 is really really really effed up, hah.

[@truegritbulldog]

Really cool vid. Very helpful to me being new to the 7.3... You do a great job explaining, and really showing stuff. THANKS!

[@danielmcqueen1024]

I love the colour of your F-250! My 2000 F-250 is a dark Wedgewood Blue... But your rims are different than mine; XLT vs Lariat?? I'm really interested in the fuel bowl replacement, gives way more room to work on that Beast of an engine :) BTW, I installed the HI AC injectors back in 2003 with a ton of Banks equipment, inter-cooler, turbo wheel and strait thru exhaust... Just love the rattle :)

[@1LOCKNLOAD]

I own two 7.3's with a combined 889,000 miles. I've had one fuel bowl issue and that was the drain leaking. How common are these problems? I've really only had 2 other mechanical failures and that was an injector pump and cam sensors.

[@LivingOnWheels]

It's almost an everyday thing on most facebook 7.3 pages. I would say you've gotten off pretty lucky. Knock on wood haha

[@dockey6942]

Tell I run 7 3 but it got only 96000 it started die this wk I found a couple thing it blowing. 20 Amp. Fuse can cam sensor blow fuse I'm getting ready to ck the fuel heater I'm a mechanic I hat to tell people that

[@cowboymcq6711]

Awesome video I’ve never seen this out of the truck. I was wondering what the quick disconnect wire was

[@hisherslandscaping7963]

Hi joe I'm still having fuel leak it's you definitely 100% coming from the fuel water valve on my 7.3 turbo diesel I replace the valve and the new valve leaks and all the same spots it doesn't Leak with a gaskets are it leaks at the bottom and at the top or the yellow handle is do you have any suggestions? I was thinking fuel pressure regulator or the fuel and water Port that's right next to the wastegate valve the plugin has the connection for the bowl heater and water sensor

[@meyou8756]

I already got fass so I went with dead full cnc block in valley. Wish I would of seen your video . Going an additional $700 with Dieselsite regulated return delete.

[@ALT_RIGHT]

FUSE 30

[@shortiemac001]

O-Ring set part number F81Z 9C387 BA. I found it at the Ford dealership. $30

[@shortiemac001]

O-ring set

[@hesson81]

Beautiful truck! Totally understand pride and joy in the 7.3...

[@spencerdillon8219]

How did you get the threads out of the nut on the fuel line?

[@chrisglines1743]

You're awesome

[@96jesse]

Appreciate the video. About to rebuild my fuel filter bowl, the pressure regulator on the return line is leaking.

[@goducks11111]

Good video bro

[@jamesb1988]

8:46 I pulled the fuel line that plugs into the FPR (and the fuel line below it too) when I was trying to make room to reach the HPOP outfittings with a wrench... could not replacing the Orings cause my truck to idle rough? Like choppy? No codes. All the other numbers look good.

[@LivingOnWheels]

The fuel line below is the feed line so maybe you have some air in the system but all in all, neither of those should really cause it to run rough. Depending on what you did with the HPOP that is definitely something that could make it run rough.

[@sammybarry1006]

You helped me out a bunch. Thanks buddy. Cool channel!

[@glorygarage9331]

I like the content and I sure do love my 7.3 I got a 2001

[@jamesconnelly7152]

I'm trying to get these beers boxes straightened out in my outside fuse box under the hood number one is a die of how do you test it and you tell me quick

[@Adamoutlawtrucker]

Good job bro love the new camera man

[@glenosborne3235]

Always great information. Thanks.

[@markfalcon5949]

As you can tell from my comment I am not very learned on the 7.3 ford power stroke engine. I finally came across you video, and WHAM, there was the answer I have been hunting for. So my question to you is this, if I eliminate the fuel bowl, what mods or changes do I have to do? I have been trying to find out why I am losing fuel out of this “ drain line” . The truck does not get driven very much, and I fired it up today to let it run and charge the batteries, circulate the fluids, etc. Saw something leaking profusely on the passenger side of the engine. Okay , after some checking things out I found this drain line, but could not determine where the hell it was originating from. Didn’t pull anything from the engine to further investigate without trying to determine what , why and where this line starts stops. Is this a common issue? What caused it to dump the fuel, and how do I repair it??? Your feedback is MUCH APPECIATED!

[@LivingOnWheels]

Yes this is a very common thing on the 7.3s. It’s just old o-rings that have failed cause the fuel bowl to leak out of the drain valve on the back of the fuel bowl. Unless you’re planning on doing a lot of modifications to the truck I would keep the factory bowl in place. I actually have a video series on how to completely rebuild/reseal your fuel bowl. Not a bad job at all. I’ll link that below for you to check out. kzbin.info/www/bejne/oaGyeKCZp7JmpdE

[@coltonkruse2313]

Just got a 7.3 after doing a lot of reading and selling my 2019 f250. Subscribed to your channel. Thanks for the work man.

[@thomasbarlow4223]

Damn.... You just set yourself up for lots of issue free miles. New trucks suck

[@sheadelargy2445]

PLEASE HELP. I know this is an old video but I had the FPR break off in my fuel line and I can not get it out. Since this is such a common issue is there a way you guys were able to remove the broken threads without damaging the fuel line ? I just took the truck apart and am so close to starting her up again. Thankyou

[@LivingOnWheels]

Unfortunately there’s not some great secrete way. I was able to use a pick tool to hold the threaded piece in place while I used a wrench to turn off the but like it normally would.

[@sedric6153]

Just got a 7.3 a couple weeks ago. Thank you for all the information! I subbed now

[@LivingOnWheels]

Congrats on the new rig!

[@sedric6153]

@@LivingOnWheels thanks man! I love it! It has a zf6. Im currently watching your "Truth on the CCV mod" video. My intercooler pipes have oil on them. My engine bay hasn't been cleaned. 2000 7.3 zf6. 197k miles. Extended cab long bed. Its white

[@beatbeat4378]

I did the blue spring mod now I’m getting 80-85psi. The only thing else done to my truck is fuel bowl stand pipe check valve delete and 180/00 injectors

[@LivingOnWheels]

Nice! Personally that’s probably a little higher than I’d want to run it but it’s probably okay.

[@sheeshmcgeesh7441]

My dad just bought a 95 F350 7.3. He says, the think burned an 1/8th of a tank just idling in the yard. Could this fuel bowl be a place to start?

[@LivingOnWheels]

If it’s leaking that much you’ll definitely see it dripping below the engine but I’d definitely start there

[@jeradstorlie5685]

I just changed the water/fuel separator valve, and it looks like it’s leaking out the top of the new valve. It’s literally just as bad a leak as i was trying to fix. Pouring out of it. Any suggestions?

[@toddb930]

@jeradstorlie5685 -- were you able to stop the leak you had?

[@Mrwhatarethose]

I cannot for the life of me fix this issue. I cant figure out what is going on, so basically when I accelerate in my obs on my front tank. which has completely been re done, new sending unit, new fuel bowl and new fuel pump. I just dont know what else to do.

[@LivingOnWheels]

I don’t think you actually said your issue?

[@whocares5188]

Ok I have a 2000 f250 7.3 if I hit it with starter fluid it starts for a couple seconds till it burns off the starter fluid then dies. I have flue going to the bowl so what can stop it from getting to the engine?

[@LivingOnWheels]

Could be a lot of thing. Oil pressure, injector harness, bad sensor, bad IDM, bad icp, blown fuse…. The list could definitely go on.

[@johnnycampos7131]

I’m the proud owner of a 2001 4WD extended cab 7.3 that I’ve owned for over 6 months and your channel has definitely been a goldmine of information for me, thanks for sharing your journey. I will definitely be on it with you.

[@amberself7514]

Question for you sir. On the back of oem fuel bowl on the bottom where people use port for pressure sensor. What size tork or Allen is it to take plug out. I would love to do a fuel bowl delete I’m not confident enough to do it. Thanks for great videos

[@LivingOnWheels]

I’m not sure what size it is. I’d imagine a standard size that would be in a set.

[@NoHalfAss]

Awesome video man, thank you for that info! I feel the same way about the goal of my channel. It’s mostly about my 7.3 for now but I want a lot more cool toys and stuff I can put on the channel down the line🤘🏻🔥

[@RollingThunder85]

Iv fixed factory fuel lines and replaced factory mech fuel pump and this obs ps f350 starts to shake violently when it warms up a little help me folks please

[@LivingOnWheels]

For me, where I would start is being able to monitor fuel and high pressure oil pressure.

[@Cfass1]

Thanks I’ve been wondering how the fuel system works. I’ve got an OBS so it’s a little different. I might buy a pack of the orings for the fuel lines to keep in the glove box.

[@LivingOnWheels]

yeah. The obs system is a little different but I don't think its too far off. I just checked riff raff and it does look like they also use the strange Viton O-rings. They are pretty cheap so not too bad to keep on hand. I keep a full O-ring kit for my HPOP and my fuel bowl (when I had it) on hand just in case. Got stranded in the middle of Wyoming 2 years ago because of one O-ring on my HPOP.

[@Cfass1]

That’s a good idea. These trucks are great but you have to be prepared. I take mine on trips for thousands of miles with the kids. When I bought the truck the guy gave me about $400 in spare parts. Now I understand lol.

[@LivingOnWheels]

@@Cfass1 haha yeah. They really are good trucks, with just a few Achilles heels. Just takes one of those things going out while not being prepared to start having a very bad day. I learned that the hard way hahaha

[@carterkastel7735]

@Living On Wheels Keep up the great videos man I am now subscribed. Reading through the comments and curious to know was it the o-ring on the ipr valve that left you stranded?

[@LivingOnWheels]

@@carterkastel7735 I appreciate the support. It was actually the O-ring on the rear drain plug.

[@chrisallen3741]

I have a messy valley but not as bad as many , it was clean as a whistle til i had it changed

[@mikeknutson415]

I really appreciate your video very detailed had no idea there was so many problems with the fuel bowl thanks buddy and by the way definitely subscribed

[@PeelyBanana69]

How did you get the broken off thread out of the fuel line? That is what I’m currently struggling with from replacing the fuel pressure regulator after the old thread broke off

[@LivingOnWheels]

Used a pick too to hold the piece in place and turned the nut off with a wrench.

[@itswhatitis8364]

I got a code for low fuel pressure, Do you think the fuel pressure regulator might have something to do with it if it failed. Truck would run but then when I would accelerate it would die, I changed the fuel pump about a year ago.

[@randallkutchma7219]

Hey Joe I am understanding that You Eliminated your fuel Bowl . My largest question is: Did you ADD A FUEL FILTER somewhere else ? Or do you enjoy dealing with Injector and other Fuel system Problems ? I also hope that you stay in a Warm Climate with it. No Fuel Heater will likely cause difficult Cold Starts or further issues !

[@LivingOnWheels]

Yes, I added an airdog fuel pump/filter setup. So a much higher grade of filtration and fuel delivery. As for the heater, unless you live in a very cold climate, and don't pay attention to your fuel, its not a concern. It doesn't get that cold in the PNW. Setup has been working flawlessly for many years now.

[@randallkutchma7219]

@@LivingOnWheels Very Well and congrats ! I figured that you would Not overlook Fuel Filtration.

[@ericbusch886]

Great video. Love the 7.3 content.

[@bucmeister7713]

From where did you source the billet fuel return fitting. Can't seem to find it in the list or I don't know what I am looking for.

[@LivingOnWheels]

Looks like I might’ve forgotten to add it. I think this is the one I went with. amzn.to/2CgCqZt

[@jamesstafford3652]

I found a motorcraft fuel return line on ebay

[@garysmith5815]

Yes I have the 7,3 will not start I changed the IPR the cam sensor and one other one still will not start now can you help me thanks you shoe a lot of good stuff

[@LivingOnWheels]

f01.justanswer.com/nmwagschal/2fa2e2f5-a2b7-44fe-a27c-7e88e2235b2c_7.3nostartchart.pdf

[@darrintamul8455]

Hey Joe, just changed the fuel pump on my 7.3 and now it won't start, ideas?

[@LivingOnWheels]

I assume you’ve made sure the new pump is running? Could be air in the system. How much have you cranked it or cycles the key? Is the fuel bowl filling?

[@joshuamckinney8020]

Thanks for the info it’s good to know. I have an 01 7.3 and I have to cycle my glow plugs about 3 times before I start it when it’s cold. Any ideas what could cause that?

[@LivingOnWheels]

It's either that you have bad glow plugs or your glow plug relay is out. The relay is super easy to test and the glow plugs aren't too bad to check through the valve cover harness.

[@hillsautohome346]

How cold are we talking? From my long term experience with cold weather and 7.3's it comes down to way more than functioning glow plugs. My bank 2 plugs have been shot for a few years and I still can start with one cycle 99.8% of the time. This living in MT and CO. Really good batteries, starter, upgraded HPOP and using Cetane boost with anti gel helps a lot.

[@LivingOnWheels]

@@hillsautohome346 I agree with you on all of that. Good batteries make a very big difference. If it is getting cold enough to worry about fuel gelling then additive should be considered mandatory at that point. Obviously, a brand new or upgraded HPOP helps as well as running synthetic oil. All that said, from my experience fresh plugs that work makes a huge difference on cold startups. Even old worn out trucks can start reliably with a healthy glow plug system. The question of how cold is important though.

[@1snapbean]

Joshua McKinn I was having similar issues with my 01 7.3. I had been running 15W-40 and switched to the 5W-40 Synthetic and it has helped a lot. Didn’t really see any increase in fuel mileage like some people say but it has help with the cold starts.

[@davidpruyne7340]

Good info ,,,, well put, easy to understand , thats a nice lookin truck ,my favorite color ,, mine is a 01 and bright red

[@finleyfendt3750]

Keep up the great work on these posts, AND, your truck looks great. 👍👍👍. 11-10-21

[@basecampwnc1745]

You need to get to your title not spend 10 talking about BS

[@LivingOnWheels]

I don’t need to do anything. They’re my videos and I can do whatever I want in them. If I want to talk to my subscribers for 2 WHOLE minutes before getting to the main video topic then I will.

[@jamesconnelly7152]

I'm working on the outside fuse box under the hood I'm trying to figure out how to test that bio can you tell me

[@LivingOnWheels]

I’m not quite sure what your asking. If it’s how to test the fuses you can visually inspect them or test for power on both top terminals.

[@adamquintanar4309]

Mine got stuck in the fuel return line, did yours get stuck? If so, how did you remove it?

[@LivingOnWheels]

Mine did and I used a pick tool to hold the broken piece in place and twisted the nut off with a wrench.

[@scottstearman5161]

Great job my brother

[@jamesparrish3768]

Had the same thing happened last night Friday night of course how do I get the ring that broke off out of the nut

[@LivingOnWheels]

I was able to hold the blocked piece in place with a pick tool and then turned the nut around it off

[@jtunez355]

Alredy bro u got it lookn zuperrr nice

[@matthew070177]

Hey Josh, appreciate your content! Great stuff I've purchased the same CNC fuel line kit but didn't come with any of those "o-rings". Does that 4 line kit require them? Can't really find a definitive answer anywhere. TIA for your help 💪🏼

[@LivingOnWheels]

The CNC kit does not need the special Orings. those are specifically for the stock fuel lines. If you are keeping the stock fuel bowl then you will still be using them on the feed and return line but thats it.

[@matthew070177]

Living On Wheels thanks for the quick reply! Little bummed, was planning on doing those tomorrow...no reusing the old ones, right?

[@LivingOnWheels]

@@matthew070177 I've seen it done but I would not recommend it. They get pretty torn up with removal and installation. That being said, I dont think you need to remove the fuel bowl to install the 4 line kit. So then you wouldn't have to worry about replacing them.

[@matthew070177]

Living On Wheels sweet! Thanks for your input! Appreciate your channel. Not as much out there for 7.3 guys. Keep up the good work!

[@rangemasterken]

Good job & nice truck! I have an early 99 f350,4x4 dually with a 6 speed manual trans. I would like to do the fuel bowl delete as well.

[@LivingOnWheels]

There are a number of very nice options out there with the fuel bowl delete.

[@johnsellers2999]

Rangemasterken I have build date 1/99 myself. Was wondering something you might be able to help me with. The fuel lines supply and return, to replace you have to drop alt. Power steering pump and big alum bracket and pull. Can I put fuel hose and hose clamps instead of routing the two steel lines down the way they are factory mounted? Thanks for any help

[@abl5516]

Cool channel man, what are your thoughts on propane injection for a daily driver/overland rig. I’m considering a 7.3 van to convert to a 4x4 camper. I like the idea of better burn. Saw a vid on power stroke help. The set up he recommended is no longer available though.

[@LivingOnWheels]

To be completely honest I don't know enough about it to say one way or another. I've looked into it and heard both good and bad. The pro's are very intriguing to me but I am not sure if I trust it enough to run on my daily driver, but that is also because My truck is my only rig.

[@abl5516]

Yeah, I think PSH mentioned low to mid 20’s MPG. the system he mention supposedly needed several parameters to met before it would release the juice. I would think most guys who add it are probably looking for a street demon? Bound to be problems. I wonder how they are with just a mild tune. Keep up the great vids!

[@LivingOnWheels]

@@abl5516 It is a very interesting idea. I appreciate the support!

[@whalehands]

I just purchased a 2002 f350 dulley with the 7.3. Love the truck. Hear great thing about the 7.3. I notice that under full throttle, it spits and sputters. It doesn't do it of course under nice easy throttle. Any recommendations?

[@LivingOnWheels]

My first instinct would be to to check fuel and HPOP pressure. Having a good way to monitor your truck is very useful. Its not cheap but what I have run on my last 3 trucks is the Edge CTS with added sensors for fuel pressure and EGTs. This allows you to monitor basically every sensor on your truck and be able to pull codes as well. I honestly think it will save you money in the long run because it allows you to better diagnose things. Edge CTS: amzn.to/3Vh3PRI Sensor Bundle: amzn.to/3EE5M3y

[@whalehands]

@@LivingOnWheels yes sir, I appreciate you words of advice and will look into them immediately. Will you continue 7.3 content or did you switch to a Cummins? I'm still going to follow you because it's nice to get as many people I can, that I can ask questions no problem. I will try and remember to let you know the issue when solved.

[@whalehands]

@@LivingOnWheels and most importantly, Thank you.

[@josephgullotto5061]

You cannot do that those fuel bowls have a fuel filter actually a double fuel filter so by removing fuel bowl u eleminated those filters so then u r going to clog injectors. 9000lb Superduty paper wieght

[@LivingOnWheels]

You forgot that the fuel filter housing also has the pressure regulator in it. So removing it would cause fuel pressure to be far too high. Except when you do what I did and put a high pressure airdog pump with better filtration and a built in regulator on the frame rail. This video is old enough that I don’t remember if I said it in the video or not. So I’ll give you the benefit of the doubt.

[@josephgullotto5061]

@@LivingOnWheels I watch your videos I have a f250 7.3 and trying to learn it the best I can thank you for your feedback I appreciate it

[@1112223333111]

a link to the first fucking part would be nice.

[@LivingOnWheels]

Google is a fantastic tool. www.fordiesels.com/ford-7-3l-fuel-pressure-regulator-billet-valve-cap-kit-isk641/?gclid=CjwKCAjwqqrmBRAAEiwAdpDXtPCUpDeJrsLtesZ-xkpfDanqBBmn_OwEuT9CwKTCLldpYAxjRmIy9RoCi7cQAvD_BwE

[@chillindailywithhugh]

I’m curious if you’re Deleting the bowl where are you running a filter

[@LivingOnWheels]

The filtration moved down to the frame rail integrated into the Airdog fuel pump.

[@Miguel-m4g8l]

Lo pueden traducir el español

[@randymounts9341]

Can you please tell me how the o ring is placed oñ the fuel line after replacing the spring in the regulator

[@LivingOnWheels]

For the viton rubber thing I would just slide it to the end of the line, put the nut over it and then tighten it down. There is also an O-ring that goes on the back side of the regulator that if I remember correctly had a pretty obvious cutout for it.

[@tommicrawford6822]

Does your C & C fuel bowel replacement improve fuel mileage?

[@LivingOnWheels]

Not really. Mainly just supplies a more constant supply of fuel to the injectors.

[@francisolachia212]

So there's no more return line?

[@weswynn1]

Hey bud I am new to your videos, I have a 02 7.3, I have 305,000 on it and I’ve never done any upgrades except for it metaled and 4” turbo back exhaust, what do you suggest for a freshen up for that kind of mileage. I’d like to put a Hydra on and that’s about all.

[@LivingOnWheels]

My first suggestion would be to do the hydra. You will be amazed at what a difference just a tune makes.

[@l.w.4914]

I have an 01 7.3. . . And im struggling with it... It has newer injectors.. new icp sensor... It runs great at an idle.. till u put ur foot in it.. it gets to 50mph.. then just has no power... And will throw a code p1211.. the code will go away if u just idle around it doesn't have enough power to pull it's self up a hill .. not sure where I should go with it . I changed the oil . Fuel filter.. can someone help a girl out?.

[@LivingOnWheels]

The best thing you can do right now is get an accurate reading of what your IPR and ICP reading are. The p1211 is saying that you’re above it below the normal range for your high pressure oil. Could be a bad IPR. Could be that your HPOP is going out. Getting accurate numbers will be the best step to make an accurate judgement

[@traderryan713]

My econoline is leaking and im hoping its the drain valve or some fuel bowl o ring based on what you say. Didn't leak until it got cold here today. I knew this buying it and not a big deal at all as i got it for a great price and was maintained well over its life i was told and believe based on the back story.. (442k miles). I look forward to working on it anyway.

[@LivingOnWheels]

It’s pretty common for the drain valve to start leaking when it gets cold. I think you’re on the right track

[@traderryan713]

@@LivingOnWheels Cool deal. Ima look at it soon. Gotta pull the air intakes off to see anything in the van lol.

[@toddb930]

​@@LivingOnWheels-- Thanks for putting this video together. This past winter when we had temperatures well below zero my fuel leak problem was really bad. Fuel would run off the back of the engine until the engine warmed up. I need to repair or replace the fuel bowl on my 2000 F250.

[@jeremypowell5285]

Thanks! Super helpful. Love the setup in your truck! Very interested to install in my own

[@howardwatts4238]

Good video just ran into it looking at obs, nice. I got 96 7.3 have had sence new done most work myself but 73 now dont feel good anymore a real pain for me but its my only trans. Keep up the good work

[@shanebryan8151]

Wow, I would never delete the fuel filter! As most diesel fuels are now mixed with bio diesel! AKA vegetable oil! Difference no real idea, however I can say on the secondary fuel filter on a semi truck pure diesel fuel I can go 10,000 on that fuel filter, bio diesel 3K to 5K. And the fuel level on the site boul was at the top.

[@LivingOnWheels]

The filters I put in place of the stock one is actually a much better filter/separator setup. Bio acts as much more of a cleaning element and that is usually why they clog filters faster. It’s washing all the grime out of the system.

[@wanesweb]

That was great info every time I start my truck gas is leaking my X lying thieving employee replace the fuel filter I believe the actual problem was he didn't put enough gas in it I told it home and one day decided to put another 5 gallons in it and it started right up but now there's diesel fuel coming out from under the truck so I'm trying to figure out where it's coming from getting up in the engine is very difficult for me but I think with all the things that you pointed out one of them's got to be my answer I appreciate it brother God bless you oh where's your water where is your fuel filter now

[@LivingOnWheels]

Id put money on it being your drain valve leaking on the back of the bowl. Those O-rings are known to fail. My fuel filter and water separator are down on the frame now by the filler neck. I run and Airdog pump filter setup.

[@backroadrunner7705]

I have been looking for the return line billet piece and can not find it.

[@LivingOnWheels]

This is the one I used. amzn.to/3w9mdjB

[@redcloud870]

Thanks for your videos. Headed to local Ford dealer for a fuel heater. Cheers

[@dockey6942]

Don't you need fuel hester

[@shanebryan8151]

As a new owner of a 7.3 And as a truck driver I've noticed theirs no fuel heater in the fuel tank, why is that? Is their an aftermarket fuel heater available? Years ago before trucks had fuel heating in the tanks we had to mix it with alcohol

[@LivingOnWheels]

There is no heater in the tank but there is one in the fuel bowl. If you leave in a real cold environment you can’t put some anti gelling additive in the tank.

[@ZachHarner4583]

Did you have a link for the billet fuel return piece?

[@LivingOnWheels]

amzn.to/3mmugFV

[@philliphager6107]

My 99 1/2 7.3 started missing, (no codes) I pulled the injectors had 2 jacked up o-rings, I replaced all o-rings on every injector, got it fired bk up, ran great for about 3 miles and it started it all over again and worse... I'd at a loss... any ideas?

[@LivingOnWheels]

hmmm. well injector O-rings wouldn't cause a miss. I would guess either valve cover harness problem or and actual injector problem. Did you take a good look at the harness to make sure there were no burnt, frayed, or damaged wires?

[@jacklugejr8568]

Excellent channel!

[@angelacheatham9046]

how did you get the threads out of the nut after they snapped off

[@LivingOnWheels]

Held the nut from spinning with pliers and used a pick tool to spin out the broken piece.

[@michaellevenduski7263]

I'm new to this. Just bought my 02 psd. 4 days ago and subscribed to your channel . My question is, what is feeding your fuel block off from tank. Lift pump. Or sump.

[@LivingOnWheels]

I have an airdog down on the frame rail. There are lots of good options though.

[@manchild2686]

Same thing happened literally 2 days ago it’s easy off tamperx for like $45 after shipping with a new spring.

[@Keendawg-uv9yx]

Man I appreciate the info on this brother 💪🏽

[@LivingOnWheels]

I am glad! I try to get good info out there for you guys.

[@scottstearman5161]

You are one cool cat! Very enlightening and easy to understand. You could probably make a great automotive teacher at a school. Great job my brother

[@LivingOnWheels]

I appreciate it!

[@josephcusick1111]

Hi joe , my name is also Joseph I'm getting a 2003 7.1 from my father in he bought it new I'm very excited since he's giving me the truck with only 85 k on it so it looks like all be watching your channel keep up the good work

[@LivingOnWheels]

Joseph Cusick dang man! That’s a pretty awesome gift! It’s hard to find 7.3s with that mileage nowadays!