Simple and Easy, how to remove a Gauge Cluster to replace a light in a Ford Explorer 1996-2001. Thanks for watching!
Пікірлер: 90
@vincentsicilia16565 ай бұрын
Thanks for the video brother. The step-by-step was spot on and made the job doable!
@cturboaddict5 ай бұрын
Anytime
@GlennCoco2 жыл бұрын
I've watched tons of these DIY Ford Explorer Videos and this was a very good straightforward no bullshit way to actually get it done.
@tta3602 жыл бұрын
Saved me upwards of a few hundred dollars by doing the swap myself! Thanks for the good instructions 👍
@randyhobbs677 жыл бұрын
Thanks man. Finally someone is starting to help us Explorer Owners out on DIY projects instead of having to go to the dealer and fix them. Props to everybody involved and let's keep this great thing going.
@cturboaddict7 жыл бұрын
Thanks for watching! Hope it helped!
@dannywebb31117 жыл бұрын
Randy Hobbs .hello my name is Danny I have a 2005 Ford explore sports trac.I can be driving and hit a hole in the road and speed g / oil g/ water g.will go off do you know what cause that.
@cturboaddict7 жыл бұрын
@Danny Webb, sounds like a loose ground connection bud.
@MsBrumak7 жыл бұрын
where to find this ground in cables to cluster?
@cturboaddict7 жыл бұрын
That's a never ending process bud. I would look under the hood, but who knows.
@rogercamp60712 жыл бұрын
This is going to come in handy when I remove the dash to fix or replace the dimmer switch in my Mountaineer some people on Explorer Forum say that these switches can be repaired and I'm going to try it,I wish I'd known how to properly remove the dashboard, tried it the other day without much luck.
@charlietame18924 жыл бұрын
Thanks, sometimes it just helps to know where the screws are and how many :)
@wak26889 жыл бұрын
Great post man!! My bulb just burned out in my 99 mountaineer so perfect. For the gentlemen with the stuck rings spray some pb blaster in your cylinders now and don't be shy. This will make your life easier down the road!! If you can set your motor so the pb blaster flows towards the crank it's a plus.
@cturboaddict9 жыл бұрын
Seymour Merc No problem bud! Hope it helps!!!!
@Nobluffbuff Жыл бұрын
So many broken links on Explorer Forums! I have a weird power draw, the more accessories you turn on the harder it draws down the altmeter...just about at a total loss, but don't want to give up on this vehicle.
@johnlarosa31375 жыл бұрын
Appreciate the video, really helped me get the bulbs replaced. Thanks.
@joeygabbert64556 жыл бұрын
Thank you sir, this video saves me a lot of time today!! Great tutorial!
@kingsnare77177 жыл бұрын
great vid, gave me motivation to do it and find all screws ..i just replaced my old cluster ,
@RobAndrewGuitar6 ай бұрын
How did you get the shift cable out
@okgo64117 жыл бұрын
Thank you I only needed to fix my cigarette lighter but this helped
@rs21434 жыл бұрын
Finally a straight forward no bull shit video done in record time. Cool thanks didn't take 30 min to know where the dam screw are Thanks
@ronwelch91806 жыл бұрын
DAAAAMN!! This was a fantastic vid...Thank you dewd...Everything was exactly like you stated..Except that someone had been in there before..Some things were easier.
@franklujan83046 жыл бұрын
hey buddy it helped a lot thank you for the video I replace the lightbulb just like yours thanks again buddy thanks
@cturboaddict6 жыл бұрын
frank Lujan sure thing bud!
@franklujan83046 жыл бұрын
I hope you have More videos on your ford eddie bauer I have a eddie bauer 1998 I replace the water pump upper hoses and thermostat. thermostat housing :0 I'm getting ready to do full service on it .but I have a yamaha r6 sports bike. hey buddy what's the best tires for my eddie bauer? keep in touch bud
@ronwelch91806 жыл бұрын
98 E.B. here also buddy!! This was great!
@MrRockydee073 жыл бұрын
This is great , But I used a battery pcm memory back up to save my computer settings than discounted my battery , NO DING DING . 👍
@josealfaroable4 жыл бұрын
What is the fuse for this explorer? I replaced all six bulbs and check every fuse and still dont work. Please help!
@mallorycainjr.19213 жыл бұрын
I'm guessing this is the same procedure for the 2002 ford explorer sport 2door?
@cturboaddict3 жыл бұрын
I would guess it to be fairly close as well.....
@mallorycainjr.19213 жыл бұрын
@@cturboaddict thanks for the quick response I appreciate it. Is it even worth it to change to led colors for the instrument lights? We all got that color maniac in us haha
@cturboaddict3 жыл бұрын
@@mallorycainjr.1921 I'm a big fan of LEDs. Be cautious as they may be really really bright. LOL (Atleast theres a dimmer)
@goldseekersadventures93802 ай бұрын
Are you sure the 194 is correct?
@blackbart194228 жыл бұрын
Thanks buddy . good video . very helpfull . thanks to chuck and jacob as well bud . good job boys !!! p.s. this was a 5 doller fix and i replaced 4 bulbs haha nice !!!
@cturboaddict8 жыл бұрын
Yup, much nicer with the lights!
@jimlindner8016 жыл бұрын
Great, I need to replace a brake indicator light. It looks like you do too. It did not come on when you turned the key or set the brake. Mine came on starting the car. It was the parking brake switch. I greased it and it now works. Yours should come on when the key is turned and you put on the parking brake. It did not so something needs fixed.
@CTJarmin5 жыл бұрын
Thank you. Very helpful.
@ervinlay69175 жыл бұрын
Thankyou!!!! Very easy
@1Cobranut Жыл бұрын
Good video, but that missing metal plate is designed to deflect your knees down under the dash in an impact. Without it your knees could go into the dash structure and really mangle your legs. I've been tempted to remove it on several of my vehicles to drop a bit of weight, but then I think about how much I like my knees, and I put it back. 😁
@joseramos-eu2cx3 жыл бұрын
I have a 2000 explorer, I'm having a problem with it, its making a beep beep sound like 5 times them it turns off front the dash do you know what can it be
@cturboaddict3 жыл бұрын
I don't bud. I'm sorry.
@65pcnelson2 жыл бұрын
Burned out air bag light most likely. It's the same type bulb as he replaced in the video. Lower LH corner of the dash, it should flash when you turn the key. If not it's probably burned out.
@publicclammer9 жыл бұрын
Nice, clear, concise Vid! Well done! AND, which motor are you referring to? Did I miss something?
@cturboaddict9 жыл бұрын
I have another short shaft 1500XS Circle C block Inline 6 Mercury. Picked it up in trade for work. Don't know if it's going on this boat for some more umph or another lighter hull for some balls to the wall skipping across the water.
@publicclammer9 жыл бұрын
OK! Let me know if you need the ring compressors or any other tools I may have that you don't have.
@cturboaddict9 жыл бұрын
Mike Horton got 120 across. Haven't fired it yet tho. Soaked cylinders and on stand in backyard
@cturboaddict9 жыл бұрын
Deep in Thought I do bud. I have a file saved with your emails. Lemme know when it's time! :)
@seananon48936 жыл бұрын
I know this video is around 4 years old, but I’m gunna be “that guy”... WHY the hell, did you do this, and not just replace all the fuckin bulbs with LED’s?
@cturboaddict6 жыл бұрын
Because LEDs under the slightest amount of amperage glow dimly. Especially in vehicles that were not outfit for LEDs. All my other newer vehicles have LEDs. I still have the explorer, and the light still works fine. Fyi- those factory lights worked fine for 14years. No need to upgrade to leds.
@seananon48936 жыл бұрын
cturboaddict -HMMMMMM I’ve replaced every light bulb in my 2004 Explorer with LEDS, all I have left to go is the headlights and instrument cluster, none of my lights are dim or ever dim, except the cargo lights, but they are made to dim and fade to off after to start the truck. Oh by the way, thanks for your video, I’m about to replace my instrument cluster lights, and and watching videos daily to kind of talk myself into the job. I’ve never liked doing any work on or under the dash of a vehicle Thanks again!
@barrya.62125 жыл бұрын
FYI PEOPLE -- AS SOON AS I ATTEMPTED TO PULL BACK MY INSTRUMENT CLUSTER MY SHIFT LEVEL INDICATOR UNCLIPPED AND NOW I CAN'T SHIFT VEHICLE.....I GUESS SINCE YOU JUST CHANGED BULBS THIS DIDN'T AFFECT YOU....I WAS ON STEP BY STEP PAGE BESIDES THIS TUTORIAL AND GUY DIDN'T ADDRESS THIS ISSUE EITHER...THERE'S HARDLY ANY SLACK ON THING AND NOW IN NIGHTMARE TRYING TO GET IT CLIPPED BACK ON....95 EDDIE BAUER EXPLORER...
@CollinTheSav6 жыл бұрын
Shouldn't you have disconnected the battery _after_ popping it into 1st? I dunno, because I'm about to do it myself soon, and get LED's, but idk which LED's work best for it, I've seen 3 options, but, idk.
@cturboaddict6 жыл бұрын
Don't have to. But you can if you choose.
@seananon48936 жыл бұрын
What LEDS did you put in? I’m about to put Blue LEDS in my dash.
@colbolt546 жыл бұрын
What's the light above and between the speedometer and the tachometer
@sounddoctorin7 жыл бұрын
no way to do mine w/out putting in first. lol. Two bolts under radio there before that will come up. Mine had a red push button that is apparently an alarm kill? Left of the column..and a nice tight wire so you have to CUT the wire tie underneath there. THe connectors on the stinking two things on the left need a screwdriver propped on the plastic piece that keeps it from disconnecting. oh well was trying to find a video that shows what the heck the single annoying thing is that comes in under the cluster..is tight and I pull it and there's some..little cable inside. Good grief. ALWAYS something nobody else has seen it seems when I do these jobs
@timbarnes35815 жыл бұрын
Would the procedure be the same for a 2001 Mercury Mountaineer? Thanks in advance for any help on this.
@cturboaddict5 жыл бұрын
Yup
@timbarnes35815 жыл бұрын
@@cturboaddict thx
@RCGshakenbake5 жыл бұрын
Good video but why not pull out that stupid f ing dinging noise maker? That is why I'm watching video to finally remove that damn noise. Had this truck for years and finally am going to stop it. Cheers.
@cturboaddict5 жыл бұрын
Sorry about that bud. Cheers
@RCGshakenbake5 жыл бұрын
@@cturboaddictNot a big deal. I just thought it was funny you mentioned how awful the chime was, because it is.
@williamshivers70358 жыл бұрын
worked precise for me but when reinstalled my oil gauge got pass the stop what did i do wrong it moves but in location pass the stop
@cturboaddict8 жыл бұрын
+WILLIAM SHIVERS Can you clarify? Your oil gauge is past the stop?
@williamshivers70358 жыл бұрын
yes there is a stop at 4pm on gauge and the hand is below the stop, when i start engine it drops another quarter inch why is it below the stop?
@cturboaddict8 жыл бұрын
+WILLIAM SHIVERS Sounds like there is a problem with the sensor itself.
@seananon48936 жыл бұрын
Yea, I’m that shithead on KZbin that likes to reply back to 3 year old comments and questions. That “oil pressure” gauge is a dummy, it’s fake, best thing to do it grab a real one at the auto parts store, or amazon, and put a real one in that accurately shows your oil pressure. I just found out about this myself last week, and will be putting one in my 04 Explorer in a few weeks.
@franklujan83046 жыл бұрын
hey bud it's Frank from California if you could help me on this one buddy I noticed when I put my charge my cell phone on the cigarette lighter I replace the fuse it blew a fuse before I replace a fuse I know it's I use the other side to use my GPS I know it's the middle of the hazard light when you push down a little small smoke comes up do I have a bad ground somewhere buddy?
@cturboaddict6 жыл бұрын
frank Lujan yes, u have a short somewhere
@sberryscake7 жыл бұрын
thank you for making this video. any idea where the dinger is? i have been unable to find it and it has decided to beep anytime the door is open now no matter what unless the key is on. i wish to kill it. i also have a 2000 explorer sport. thanks.
@cturboaddict7 жыл бұрын
The door switch is probably bad. But this video should help you. kzbin.info/www/bejne/f5OZaWdpaNVpgK8
@seananon48936 жыл бұрын
There is a way to turn that finger OFF, for the “key in ignition “ alert, and the “seatbelt” dinger, you can find a video on KZbin how to shut them off, it’s easy and involves turning your key on and off in a certain way a certain amount of times, I shit my dingers off, but I suggest leaving the one for your “lights on” alarm ON, I shit mine off and ended up draining my battery a few times, but it’s nice not hearing that fucking bell telling me to put on my seatbelt. I’m on my phone right now or I would find the link and pass it on, I bet you can find it.
@angelgjr19996 жыл бұрын
My rpm gauge isnt working, but this seems like too much work, i will just buy a heads up display instead.
@cturboaddict6 жыл бұрын
Angel Gutierrez it's really not a lot of work.
@1bowlofsoup7196 жыл бұрын
I have an 01 explorer sport trac (similar interior) and I realized the interiors age very bad. Everything squeaks and breaks so easily.
@cturboaddict6 жыл бұрын
4Destruction yeah, things do tend to come loose. Keep in mind, its 16 years old. Good truck though
@goaway997 жыл бұрын
nice vape \
@seananon48936 жыл бұрын
Dale Perkowski - vapeing is gay, just smoke cigarettes...
@j.l.daltoin22386 жыл бұрын
good job but I can do without the dirty mouth comments other than that great job
@cturboaddict6 жыл бұрын
jerry dalton it's who I am. Thanks for watching, hope it helped you.
@MsBrumak7 жыл бұрын
somebody pull of check engine light in my old explorer :D
@LS2kid9 жыл бұрын
Cheeeeeeeeeeeeeeeeeeeeee
@kenjordan28325 жыл бұрын
you do know this is a how to fix a car video & not a how to use profanity video. What the HECK are you smoking?
@cturboaddict5 жыл бұрын
You know this is my video. And if you've watched anythingbive posted, that's just how I talk. But thanks for watching, and please subscribe.