Ford Explorer ST with Valvetronic Designs Universal Mufflers

The Ford Explorer ST is the perfect daily driver and is both fun and practical at the same time. However, from the factory, the exhaust is not satisfactory to the likes of most car enthusiasts. Luckily, with the help of Valvetronic Designs Universal Mufflers, this Explorer ST comes to life with a beautiful tone all while having the capability to instantly close the valves and return to stock-like sound levels!
Our Universal Mufflers continue to prove their versatility!
Purchase yours today:
valvetronic.co...
Check out our other products:
valvetronic.com

[@jeremynerl9604]

Honestly doesn't do the setup justice, just installed the same setup on my ST and when you roll into boost it screams with the valves open. For the money it out performs anyone else on the market. Oh and my wife can't tell that it has an x pipe and muffs with the valves closed. WinWin except the person in lane 2

[@hillre14]

SICK!!! I love this had I this available when I bought mine idve gotten this

[@stangbanger856]

If they only tucked up closer to the bumper, they hang to low for me.

[@OFREI]

Hands down the best sounding exhaust I've heard on the ST...I'm close to buying these, but would like to better understand what ​ @clucas19 asked below...won't the back pressure when the valve is closed cause long term issues with the turbos?

[@OFREI]

Also have a stupid question, what's entailed with connecting Valve to vacuum line or battery or something mentioned in this video...will this run up my install cost at my muffler shop, is it a difficult task?

[@valvetronic]

The back pressure will never be any greater than the stock mufflers, so no issues will occur. The vacuum control box install is not difficult at all, you could have your shop do it or you could even do it yourself! Here’s our official install guide: m.kzbin.info/www/bejne/n6G5paqhlp5jZpY

[@jamessimmons3921]

​@@valvetronicHello, I've had my ford explorer st for a month now and would like to get this set up, where are you guys located at because I live in Philadelphia and would love to come by.

[@prestonmichie4509]

With the muffler valves closed, can you speak to any drone/resonance sound while cruising on a highway? I use this for a family vacation hauler and wouldn't want it to be annoying. THanks!

[@prestonmichie4509]

Also, what x-pipe do you recommend?

[@spyplane8]

Except the one side where the elbows been removed will always be loud right ?

[@brandallcury4523]

I received mine about a week ago but having a difficult time find a mechanic familiar with this

[@naydogz]

And thats the only reason I haven't bought one myself 🥲

[@byeager21]

Do you have interior recordings with the valves closed? Ive had electric cutouts on other platforms over the years and love the option to have them closed. Especially in an SUV.

[@jeffshehan96]

How do you open and close the valve? I really like the open sound

[@valvetronic]

it’s a remote!

[@brandallcury4523]

For the St, what size did you get and where do you get the tips also what size? Is there a link for the resonator you put?

[@valvetronic]

2.5 valvetronic muffflers, y pipe from valvetronic, x4 black tips, 2.5 inlet X pipe is just standard off amazon

[@randalllawkin]

Will this work on the aviator too? I know it's the same platform.

[@valvetronic]

Yes!

[@spencerbello5345]

A little late to the party, but could you recommend which x pipe you used? I want to go with the same setup y’all have shown here, and I think the x pipe y’all chose goes so well with these mufflers!

[@valvetronic]

just a basic x pipe from amazon! lol

[@spencerbello5345]

@@valvetronicfollow up question, I had the mufflers installed today and I’m currently trying to wire up and plumb the control module but I’m having a tough time locating and getting to the bumper vents that you discuss, could you share an image or little video of where how to access from inside the trunk?

[@mikep0602]

How are those welds holding up going from ss to mild

[@lgt304]

What did the use to cut the crossover pipe on the end to convertit to dual outlet? Im asking because local exhaust shop said they only use a sawsoff and it wouldnt do a clean cut . 1st they told me they could do the X pipe and installi my Mufflers for like 299 then said they couldnt do it.

[@jakevandee2755]

Do you guys have any videos with these mufflers and the stock res still on? I’m debating since they’ll be going on a Lincoln…

[@valvetronic]

we don’t have clips but tons of folks just run the mufflers. you will be just fine!

[@ZachMalinowski-ru7os]

Do you know what the decibel difference is between stock and aftermarket?

[@Rob-zj7gh]

Any drone with the valves closed? Always worried about that when getting rid of the resonators.

[@valvetronic]

Extremely minimal

[@christianhepler7798]

How do you order the different mufflers? On your website, I mostly see universal mufflers that are 1 inlet with 1 outlet, and then these are 1 inlet with 2 outlets. How do you specify which set-up you want?

[@valvetronic]

All of our mufflers are single outlet. For dual outlet application, you will have to either purchase our single to dual outlet tips, or a y pipe with 2 separate tips.

[@christianhepler7798]

@@valvetronic oh, so you don't sell the mufflers in this video? Strange.

[@valvetronic]

@@christianhepler7798 we do! please rewatch the video. we removed the elbow part!

[@robertgomes7548]

Hi I'm Rob I have a 2020 ST so where do u hook up the vacuum hose to on the Explorer..

[@valvetronic]

Our Universal Valved Muffler kit comes with a vacuum control box that can be routed to the nearest cigarette lighter or can be hardwired to your vehicle

[@pabloherrera4872]

is there a location near by where you are able to install these ?

[@valvetronic]

We have a list of certified dealers on Valvetronic.com, however any good local muffler shop will be able to do the work!

[@mathoo123-gaming4]

I already have an MAPerformance exhaust on my car am I able to combine the two?

[@valvetronic]

Yes You are!

[@clucas19]

So when you closed the valve aren’t you leaving a lot of pressure on the twin turbo to release

[@clucas19]

Because with it being stocked the pressure is released with four mufflers tips as opposed to 2 muffler tips open and 2 closed leaving pressure to the twin turbo

[@valvetronic]

@@clucas19 correct, there is still a lot of flow

[@clucas19]

@@valvetronic so I don’t understand the design. Why modify a Module that is supposed to silence but while silencing it’s creating pressure to the system.. which over time if you ride around with the valve closed it will destroy the turbo charger causing them to over heat..

[@zkk1001]

I love how your disclaimer page on your website says your product is not street legal, and meant only for track use, but your videos only show cars on public streets. When was the last time you took your Ford Explorer to the track? HAHAA! Rediculous

[@Samuel-yt2tj]

pr໐๓໐Ş๓ 😭