Ford F250/F350 2011-20 Super Duty Headers and Exhaust

[@Grifter371]

My friend owns the silver F250 in the video, unbelievable craftsmanship and sound. The video is excellent and it doesn't even do the exhaust justice.

[@genesmith918]

Marc Mancino hey I see he’s got jersey plates. Where about? I would love to hear it. Thinking about buying this exhaust

[@toomuchbeer07]

Did your friend install the entire kit onto a new truck or was it off the factory warranty? Also was a custom tune required after installation to keep the check engine light off? I ask because i am looking at the whole kit as well and am hearing that a tune is and is not required. I know people do the tune on these trucks with the entire system because they want to maximize the power out of it. But what about if the truck is still on warranty, will it void if a tune is done?

[@Grifter371]

@@toomuchbeer07 The truck was brand new at the time, had maybe 2,000 miles on it. Stainless Works was nice enough to bring the truck to a shop and put it on the dyno. The shop also put a tune on it to take off the CEL. You will need some kind of tune to not have a CEL, no way around it. Voiding the warranty is completely based on your dealer. I've worked on cars at my dealer with aftermarket parts and we still covered repairs, others we didn't. From my personal experience an exhaust is not going to void anything unless you have issues with a CEL that may be related. For example if you go in for a noise in the suspension I wouldn't void your warranty for an exhaust. Obviously each dealer is different. My advice is that if you are that worried about voiding the warranty, then don't get anything that could compromise it.

[@toomuchbeer07]

@@Grifter371 Thanks for getting back to me

[@toomuchbeer07]

@@Grifter371 My F250 is new as well. Bought it last June. Just over 10,000K on it. I already confirmed with the dealer that the warranty would not void with the exhaust system. The only thing they seem particular about was a Ford dealership installing it which i can see. The important question is whether the dealership had a issue with your friend doing the tune on it because of the long tubes setting off the CEL? Was the tune allowed or did your friends dealership have a issue with the tune and did or wanted to void the warranty? Also, what tune did he do? Was is a custom tune program or was it one of those had helds? I went to Ford performance website Canada and they sell 5 different manufacturers of hand held tuners so i would think that if they sell it on their website that obviously it is permit able. Am going to go to my local dealership today to get the low down on this. Would love to ask your friend some more questions about it if that's ok. My email is: [e-mail]

[@_willalexander.88]

Hopefully ready to release an exhaust system for Ole Godzilla 2020!

[@STAINLESSWORKSNET]

kzbin.info/www/bejne/nYSbmHWFdticmcU

[@35geovanni]

any mpg savings? any drone noise? but besides that, it sounds brutal .please let me know because im about to click the buy button . thanks

[@dwayneroy476]

Does this system need any tuning if one went with the long tube headers ?

[@rdp2370]

Love the sound and performance gains with the addition of the SW Headers and exhaust on my 2014 F350. I had to cut some of the pipe down to fit my regular cab dually, but it is worth it!

[@danielrobinson4227]

I had the full exhaust put on my 2011 crew cab 4x4 and it sounds awesome. Did you run into any fitment issues around the transmission pan? Mine vibrates and rubs against the pan at idle once the truck is warmed up. The buzzing sound is annoying.

[@rdp2370]

@@danielrobinson4227 , no fitment issues like you're speaking of. I had to cut several of the pipes to make mine fit on my regular cab long bed which its not intended to be used on. The cat. Pipes could be loosened and you should have enough adjustment room to move it around. One thing I want to note is the spare tire shield vibrated and it caused an irritating metallic humming noise so I removed it and no other issues. Be sure all the pipes have clearance between them , especially the two over the axle so it doesn't come in contact with one another. Let me know.

[@manowar5516]

Wow. That's nice guys. Excellent engineering And craftsmanship. Any power increase numbers?

[@infamouskingj]

Best exhaust comparison video on the whole internet!!! Nice video!! Sounds good too!! I am curious how much power it picked up with complete, header to tailpipe, kit?

[@jacobsmith8121]

Sound is nice to listen to but what about dyno numbers??

[@superdutyzack]

Jacob Smith roughly 50hp gain.

[@superdutyzack]

John E 50hp gain with headers maybe less with the cat version or maybe more catless. A tune is required by a custom shop. No they aren’t CA legal.

[@EngineeredAdapters]

@@superdutyzack I call BS. If headers and a cat-back system increased 50hp, those numbers would be plastered all over the website. I cannot find dyno numbers anywhere which makes me believe it's not a very big power upgrade. I would invest the kind of money they are asking if I knew what the torque and HP gains were. These are trucks, and I tow a lot, I'm way more interested in the torque data. The badass sound is just icing on the cake but I'm not investing over $3k just to sound cool, lol.

[@rjjrrailsgscalesolenske5231]

Extremely interested do you guys make anything for a 2020 f250 ?? Thks ray

[@chadwallo8026]

Do you make a setup like this for a 2010 f250 5.4 3v 4x4?

[@unorthodoxridez]

Chris and stainless works are top notch.

[@OSUCharger]

Jesus christ it sounds like the General Lee now. That's awesome. Too bad no option for dual split rear exit.

[@STAINLESSWORKSNET]

Ha, thank you! Yeah, as far as exit locations, the lightning-side exit and stock location are our most popular so that's what we are offering.

[@vpolarbear]

Wow Guys! Having and showing the Stock system/SW Exhaust stock Manifolds and SW Full System !! WoW Exactly what People want to See and Hear! GREAT JOB! Its so hard to guess what it will sound like unless you just so happen to have it on hand . which is never.lol

[@Fzr600pike]

Is it possible to only install the catted headers using the stock exhaust

[@STAINLESSWORKSNET]

Yes, our Factory Connect headers are designed to fit to the stock exhaust.

[@brussell639]

But why would anyone want to?

[@kylesnavely6165]

This is finally a proper system and an awesome video.

[@benniewalker52]

With the lightning style, is it prone to rust? I do off-roading and winter driveing.

[@rodneytatman449]

Is there a gas mileage gain with either the full system or the cat back? What kind of power gains are you seeing? Is a tune required or a benefit to have with this system?

[@evergreenshogun9634]

Gas mileage gains??? Not when your truck sounds like this lol

[@superdutyzack]

Rodney Tatman No tune required but greatly helps and improves power and mpg. Long tube headers are good for 50hp gain. The local exhuast shop guy I go to has a 6.2L F250 he did custom headers with and tuner and when dynoed he said he gain like 68hp to the wheel or to the crank.

[@superdutyzack]

Been waiting years for a ready to buy header kit!!!

[@asphaltwarrior1]

What about for the 2010 5.4 Super Duty

[@danielkatairoak4015]

Any kits for the older 08-10 5.4l super duty’s

[@jaybarnhart8920]

With just the headers...15hp? 24tq?

[@jaybarnhart8920]

What would this sound like with just the headers?

[@redetroitwing]

Are they ceramic coated? Why so expensive?

[@garyanderson6988]

Whew! Awesome sound along with great craftsmanship and performance! America!!

[@91prostreetstang]

LOL need these in my life..... however wife found out I spent this kind of $$ my next video would be my funeral video....LOL damn I need these in my life......LOL

[@STAINLESSWORKSNET]

We can send it to your buddies garage, she'll never know lol.

[@91prostreetstang]

@@STAINLESSWORKSNET sadly my particular set is 2500😳😳😳😳😳 That's a Tad more the this medically retired cop a can hide...... LOL. But holyshit if I had cash.....

[@91prostreetstang]

And by no means am I saying they are not worth the $$$ just out of my budget at this time..

[@shanelawrence3972]

Still need a 7.3 for mock-ups...?

[@brussell639]

Sounds awesome, especially with the x pipe.

[@JagerZed]

Does your target demographic not care about dyno results?

[@brussell639]

Stock manifolds and shorty headers are usually not too far apart where power is concerned. But long tubes usually improve over the entire power curve, especially mid to high rpms.

[@LightningRich00]

@@brussell639 Right, which is not ideal in a tow vehicle. Odds are that this probably lost low end torque #'s.

[@LightningRich00]

@BJames3351 I'd like to see the video, share the link please. Because opened up exhaust does effect low end torque. That's a fact on most gas engines.

[@danadams1661]

LightningRich00 bjames3351 is right. It legit makes power everywhere in the curves . Horsepower is a function of torque and rpm season 1 episode 15

[@LightningRich00]

@@danadams1661 I'm assuming the test was on a n/a motor? Maybe I'm correlating this to boosted engines. Open exhaust reduces back pressure, lowers boost, sometimes lowers power.

[@Scrambler85]

I wonder how that would sound on the new 7.3 Godzilla motor?

[@rswany16]

Finally!! :D it sounds amazing!

[@STAINLESSWORKSNET]

Hey! Thank you very much. ;)

[@rswany16]

Stainless Works If you wanted to send a whole system out for free, I'd definitely make a video about it! ;) lol but if not thats cool too, i hope to buy one some day in the future!

[@35geovanni]

I paid for the system about two months ago and I’m still waiting for it. Sorry stainless but that’s a bad bad way to do business.

[@jro6497]

Anyone ever dyno one of these trucks. About to start doing some dynoing on a 5 star tune, 87 stock, 87 performance, 93 stock, 93 performance, and 93 tune on e85, maybe also an e85 tune

[@triplenickle6995]

So whats the dyno numbers for the complete header and exhaust system behind the rear tire? Also what MPH gain did you get?

[@runeshark22]

minimal. on its own, virtually no benefit short of maybe a half a mile per gallon. But when you pair this with a throttle body, tuning, and intake, it can put about 30 more to the ground on high octane.

[@rdp2370]

@@runeshark22 what throttle body, a BBK or one off a Mustang I hear people use?

[@runeshark22]

@@rdp2370 the bbk works fine, these super duty 6.2 aint ever gonna be much of a powerhouse at all, they're adequate in stock form, and decent at best without a supercharger

[@johnkenley4687]

Definitely gotta look into one of these!

[@stevenbrooks1243]

Looks great

[@gunube]

Thanks for looking after the 6.2 gassers. The headers are in my future for sure.

[@gunube]

But, like other's have asked, does the either system have the dreaded drone at 2000-2200 rpms?

[@Krossf1re]

Now do the 2V and 3V V10s, with larger dia runners.

[@mediocrefloridaman]

$1400 cat-back exhaust $1600 headers. Big dog status, I guess.

[@runeshark22]

all that for snappier throttle response and a bump in horsepower.

[@redetroitwing]

Small bump, probably barely noticed increased in power

[@jro6497]

That’s not that expensive for legit exhaust and headers. Mercedes headers are 3k plus

[@jro6497]

@@redetroitwingyou don’t know anything about long tubes, probably makes 40whp plus

[@mediocrefloridaman]

@jro6497 it's now $2700 for the headers and $2k for the exhaust. That inflation is unreal.

[@kriscrews1339]

$4500 for full exhaust is insane

[@mikebishop4346]

Do you have any installers in the NH area

[@STAINLESSWORKSNET]

stainlessworks.net/dealer-search Check our dealer locator or feel free to give our crew a shout at 800.878.3635

[@mannytorres3301]

What headers were used for the video .? The off road headers or the catted headers .?

[@STAINLESSWORKSNET]

We used catted for the video. Off-road will get you a little more flow and a little more volume.

[@EricD-og1mt]

Sad I have abandoned the header idea bc of the cel, no help from 5 star tuning bc of emissions. Who wants headers if the check engine light gets set off? Cat back and stock manifold replacement for me.

[@lionelcroom7364]

I just talked to them. I have the 5 star on my 2012. Put 4.33 gears in her with tune. Everything else is stock. On the Perf 91 oct it litterally gets a little sideways between 1 and 2nd shift. They are selling me this exact system along with the tune for my setup. Why would that cause a CEL? The tune should delete that code if you tell them what exhaust your using.

[@EricD-og1mt]

Contact 5 Star like I did they will tell you we do not remove any CEL on tunes for emissions, that’s illegal.

[@jro6497]

A fordscan might work for that

[@chrisvroom8242]

Omg I love it

[@littleBoy213]

Can you do my truck ?

[@STAINLESSWORKSNET]

Do what?

[@littleBoy213]

@@STAINLESSWORKSNETI need a full exhaust system for my 2012 f350 super duty

[@littleBoy213]

How do I get a SW exhaust system, I’m from Canada.

[@STAINLESSWORKSNET]

@@littleBoy213 You can either order on our website or call our sales team. 18008783635 to place the order over the phone 👌

[@jameychurch5933]

Holy crap 4,300$ for the full kit though 😢

[@KM-fe7dh]

Dam sounds good

[@STAINLESSWORKSNET]

Appreciate that, thanks!

[@WaterandWoodsmen]

304 is not high grade stainless

[@benlzicar7628]

This is tits... my 13 XL needs this now.

[@EngineBacon]

Hnot true dual though

[@superdutyzack]

Why do you say that?

[@rambonie3339]

Great vid!! Will be buying from you soon:)

[@MOTOVATOR101]

too loud inside of the cab...

[@superdutyzack]

dont buy it then

[@kageford444]

Is this coming from experience with the product or just by watching the video?

[@dwaynevuolo9179]

Awesome I need that for my truck 👍👌👏👀

[@gearjammer4779]

From what I’ve read it does no good to have headers with cats. If you remove the cats and resonators then it throws codes and you lose some low end torque. Talk to your service writer at the Ford dealer and he will explain it all. No performance gains to be had with the cats left on no matter what you do to the exhaust.