Рет қаралды 4,205
Ford fiesta door panel removal - Ford Fiesta MK6 - door panel removal
Removing the front door trim on a Ford Fiesta MK6 can be relatively simple, but requires gentleness and caution to avoid damaging the trim or door components. Here are the steps you can take to remove the door trim:
Open Window: Open the front door window if possible. This will facilitate access to the upholstery fastening elements.
Check the fasteners: You will usually find several fasteners around the perimeter of the door, such as plastic clips or screws. Make sure they are all unscrewed or detached.
Remove handles and buttons: If there are handles, window controls or mirrors on doors, remove them. The handles can be screwed on or simply pressed in. Gently detach them and place them in a safe place.
Open the control panel buttons: If the window or mirror control panel has buttons, use a plastic panel opener to gently detach them from the panel. There are often screws securing the upholstery under the buttons.
Remove retaining clips: Use a plastic panel opener to gently detach the clips holding the trim from the door. Start in one corner and work your way carefully around the edge of the door, unhooking the clips.
Gently pry the trim: Once the clips are detached, gently pry the trim away from the door. Be careful not to damage the upholstery or door components. If necessary, ask someone for help to pry out different areas of the upholstery at the same time.
Remove the door trim: Once you unhook all the clips and pry gently, you can completely remove the door trim.
When reassembling, make sure that all components are properly attached and there is no play. If you notice any damage during disassembly, consider replacing the upholstery or at least repairing the damage before reinstalling it on the door.
Ford Fiesta MK6 - Removing the front door trim
Visit the channel; for more;
/ @naprawynawariackichpa...
Second channel;
/ telefonyklasyczne
Third channel;
/ spankoasmr
#poradnikizróbtosam