Ford Focus Engine Air Filter Cold Intake mod for under $50 bucks

- save gas, save money doing it yourself, save weight removing old housing
Ford Focus Engine Air Filter Intake mod for 2006 ZX4
tools needed:
T20 torx driver, Dremel cutter, Phillips screw driver, small sockets to remove some other screws.
here's the parts I used:
- Spectre Performance Universal Clamp-On Air Filter: High Performance, Washable Filter: Round Tapered; 3 in/3.5 in/4 in Flange ID; 6.719 in (171mm) H; 6 in (152mm) Base; 4.75 in (121mm) Top,SPE-8136 Blue
amzn.to/37PCkv9
**FYI Amazon will say this wont fit, because you need the next coupler part and this doesn't come stock with Focus
- Spectre Performance 8751 Black 3" to 2.5" Intake Coupler
amzn.to/3FV0m4K
As an Amazon Associate I earn from qualifying purchases.

[@AlvaroHernandez-uv2eb]

Nice video, u made it look easy, I did mine and had to JB weld a piece of the pipe were the sensor goes since the tube/pipe was to long

[@Media-Cafe]

i think i was fortunate to accidentally cut in the right spots

[@efnmadaboutcivics88]

Any check engine lights pop up after awhile?

[@Media-Cafe]

i've never had any error associated with filters come up. nice to have a permanent fix and increase performance.

[@trevorsweeney4292]

What did you use for a shield on the bottom there

[@Media-Cafe]

the ford focus has a metal platform where the old filter box used to sit/attach. the new filter simply lays/hangs on top of that metal platform. you can also take/cut a piece of the old filter housing and attach to the platform for an extra side guard in one of the bolt holes.