This worked perfectly. I changed my clone to a chipped clone. That worked. Those of you asking about the Amazon clone. Do not buy the one’s under 2 hundred non chipped.
@LiomarVillalonga3 жыл бұрын
Thank you for the delivery of this software, I have been looking for this free information for a long time. Very excited to try it, I installed it and everything works excellent so far, previously it used the 86.01A version but it had many problems with vehicles from 2011 onwards. greetings from venezuela Barquisimeto Lara state !
@zokac0213 жыл бұрын
I'm glad to hear that. My motivation is comments like this
@Juanpr032 ай бұрын
Yo instale ,pero las flechas verdes que esta arriba de lado izquierdo no me sale y no conecta con el auto la interface
@jdmtake1 Жыл бұрын
Do you know if the vcm2 can change the vin on a junkyard pcm to replace the pcm that does not work and match the VINs body
@sebry25ify3 жыл бұрын
Awesome info. works perfect including programming.
@emmanuelmejia30446 ай бұрын
Hi, nice job, now a need some help please, when i conect the vcmii the driver say USB serial port, not the one you show, can you give me and advice?
@Alobster16 ай бұрын
I get a flexnet connect product is not registered error when trying to recover the vcm. Any ideas?
@user-ky7ty3ie1x9 ай бұрын
Hi mine installed but saying error connect to laptop /problem but its connected
@user-ky7ty3ie1x10 ай бұрын
I purchased one but cant seems to connect with my car code required
@angelurdaneta5961 Жыл бұрын
Hello how are you, I tried with 2 genuine vcms and the vci doesn't detect them, but I try with a clone and if it detects it, could you help me?
@2WhiteHorse8 Жыл бұрын
I've tried the comment replies to get around the Patch not working. I am still getting the "Failed, Please Try Again : 1" message. 1 time I also got "Failed, Please Try Again : 3" Any suggestions at all?
@zokacstutorials7361 Жыл бұрын
Keep trying. Once, IDS patcher, will do the job, and open IDS app.
@edups3307 Жыл бұрын
Mine starts when i click the patch but theres no vehicle section, only info. After a while it exits and says failed -3.
@edups3307 Жыл бұрын
Installed on another windows and it works. Do I start ids patch everytime?
@zokacstutorials7361 Жыл бұрын
@@edups3307 yes , you start patch everytime when you want to use Ford IDS, you can delete original icon of IDS
@smithsiptv26543 жыл бұрын
Hi just an update, i am geting a bug when receiving car information from the ECU to edit vehicle parameters. After trying to recive parameters to config ecu i click on the tick when its finish loading in just stays on the same screen want go past the receiving page. Any help on a fix
@zokacstutorials73613 жыл бұрын
Sorry to hear that, it seems like a IDS program error to me. 20 Jan a new version (120.05) of the IDS program is coming out we will see, is it a IDS software bug or patch error
@smithsiptv26543 жыл бұрын
@@zokacstutorials7361 ok thanks mate keep up the good work
@tylert69goat3 жыл бұрын
Can't express how helpful this was. Thank you for taking the time to make this video.
@jehanong96382 жыл бұрын
mine does not detect the vcm2
@zokacstutorials73612 жыл бұрын
@@jehanong9638 First start IDS with VCM2 , then connect VCM2 to the vehicle
@user-ky7ty3ie1x9 ай бұрын
Mine getting error ids to vcm cable not detected I can see green light/computer icon flashing on vcm
@Tomte4Play Жыл бұрын
Great Video Thank youu :) My VCM 2 Interface doesn’t get detected or automatically configured:(( like yours do u have a solution for this problem?
@zokacstutorials7361 Жыл бұрын
Sorry I don't have idea. Did you connect VCI2 only on computer, without vehicle? Sometimes when you first connect vehicle to VCI2 and then to USB, the computer will not recognize it. Make sure that the VCI2 is connected to only one power source (from USB)
@charlyariel28643 жыл бұрын
Hello, thanks for the tutorial, can you perform the same procedure of the tutorial using but using Ford IDS v121 and Patch v121? and does it also work for Vxdiag Nano? or for Vxdiag Nano is it installed differently? Thanks
@zokacstutorials73613 жыл бұрын
If you use VXDIAG, dont use this method for installing IDS software. This tutorial is only for VCI 2 and VCI 2 Clone devices.
@desssu2 жыл бұрын
Thanks a lot, all works fine, is it possible update abs module from Ford Server?
@edups3307 Жыл бұрын
Vci manager connects to vcm unit but ids doesnt
@MrSashkoM Жыл бұрын
HI! Thanks for the tutorial! Everything works for me except pather. It fails with error message " Failed, Please Try Again: 1 ". How to solve the issue? thanks
@2WhiteHorse8 Жыл бұрын
Me too man. I tried the different comments solutions but it's still not working for me. I couldn't find another download either.
@lemmur42032 жыл бұрын
Everything is working fine but after read car configuration ( in module programing) and click " accept", program is freezing. Do you know some solution for that? Interface : Vcm 2 probably clone. Car : Fiesta mk7 petrol 1.25 ,2016
@zokacstutorials73612 жыл бұрын
Sorry, I don;t know
@brewcracker2 жыл бұрын
what OBD2 is compatible with this? Can you please help?
@greasemonkeygaragesd2 жыл бұрын
When i try openin up th epatch file, its says Failed, please try again :1, any idea? I can pay for support. Using a VCM2 genuine
@greasemonkeygaragesd2 жыл бұрын
I figured it out! I needed to place the zip file, the extracted file and the ids shortcut into the recycle bin. Only the vci manager and ids patch stayed on the desktop. It works!
@makkial-saboodi3569 Жыл бұрын
Can't update VCI showing error (VCM2 clone full chip) . Any help? Or need old version IDS101.4 please
@zokacstutorials7361 Жыл бұрын
Did you try to put VCM2 in recovery mode and then try to update? (hold reset button and then connect USB from PC) Like on this video kzbin.info7Ud5PORxEwE
@makkial-saboodi3569 Жыл бұрын
@@zokacstutorials7361 I'll try . Thank you
@franciscoboya74893 жыл бұрын
Hola, me da error al actualizar el vci, como lo soluciono? Por favor responde. Gracias.
@zokacstutorials73613 жыл бұрын
You must put VCM 2 Clone in recovery mode, and try to update. If VCM 2 Clone update fails, restart all process. Put VCM 2 clone in recovery and try again. I was updated my VCM 2 Clone, 5 times. Check USB cable (VCM2 PC) don't use long cables (2,3 or 5 m). Use only 1m cable.
@franciscoboya74893 жыл бұрын
@@zokacstutorials7361 No sabía como poner el modo de recuperacion pero al final lo he conseguido. Y he conseguido actualizarlo y que funcione. Gracias.
@aumado3452 жыл бұрын
@@franciscoboya7489 como lo hiciste amigo
@OBDDIAGNOSTICS Жыл бұрын
Thank you !!!
@zokacstutorials7361 Жыл бұрын
You are welcome!
@jefflaney93553 жыл бұрын
At 8:23 in the video the VCM symbol disappears from the bottom right and you get an error. How do you resolve that?
@zokacstutorials73613 жыл бұрын
If you look closely, this error is because VCM2 is not connected to vehicle. "IDS is unable to communicate with the Vehicle". I don't have this error when vehicle is connected to OBD II
@jefflaney93553 жыл бұрын
@@zokacstutorials7361 Thanks a lot for the reply. Mine was doing exactly that after I went up to 121.02. Today after I updated to 121.04 I realized that my VCI Manager had to be updated. I hope that resolves it.
@oliverqueen94453 жыл бұрын
I format my windows 7 couple times and try again but still the vci wont detect my vcmii. Do i need to use different windows?
@zokacstutorials73613 жыл бұрын
Do you have device (VCM2) listed in Device Manager? If you have, then maybe is problem in your VMC2 serial number. Some people reported that some serial number are banned from IDS software.
@zokacstutorials73613 жыл бұрын
if you don't have VCM2 listed in Device Manager, please use short (about 1m) USB cable with ferrite.
@oliverqueen94453 жыл бұрын
@@zokacstutorials7361 alright noted, thank you so much for the reply. i will try after i got the laptop back. just sent it to comp shop for windows xp format
@000000042242 жыл бұрын
Greetings, I need help friend, I see that you are good at this, but I follow the steps to the letter and when I go to connect with the software to update the VCM II that I bought on amazon a week ago, it does not let me connect or recognize or any stuff. please help.
@zokacstutorials73612 жыл бұрын
Sorry. Try to put VCM II into recovery mode, then Update VCM2 tool: (6:18)
@SametNacar2 жыл бұрын
ı patch started but is failed plase try again :1 error why ?
@zokacstutorials73612 жыл бұрын
I don’t know. But keep trying. Once will do the job and open open IDS app.
@SametNacar2 жыл бұрын
@@zokacstutorials7361 ı trying again. But is error windows 10 x64 bit ..
@mohammadalkassem819822 күн бұрын
Thx you Install VMware or windows 😊❤
@chasoy3142 жыл бұрын
The IDS-120.04 software updatefailed
@worldentropy2 жыл бұрын
Silly question .. may even be a FAQ :) What's your recommendation on a really high quality full VCMM clone?
@robertoescalante20773 жыл бұрын
Hi, I also got the same error shown. Could you explain how to put it into recovery mode? Thank you
@robertoescalante20773 жыл бұрын
Never mind, I was able to find it and make it work, great tutorial!
@devonteforeman3 жыл бұрын
@@robertoescalante2077 I'm getting the same error how were you able to resolve it?
@robertoescalante20773 жыл бұрын
@@devonteforeman Yes I was, I just looked for a video on KZbin on how to put it into recovery mode
@zetaretikuli15452 жыл бұрын
how to fix testman error? its crashed on clearing dtc
@zokacstutorials73612 жыл бұрын
please explain, when "testman" error occurs ?
@zetaretikuli15452 жыл бұрын
@@zokacstutorials7361 when i read dtc errors and try to clesr it. Progress bar is very slow and after 1 or 2 minuts just say testman error. I run ids using ids patch every time and use hq clone
@zokacstutorials73612 жыл бұрын
I will test later ...
@Ibamba72 жыл бұрын
Will this work with VCM2 Chinese knock-off clone?
@zokacstutorials73612 жыл бұрын
(genuine or clone) - my VCM II - is clone version is chinese
@samueldasilva4022 жыл бұрын
can it be programmed with this software?
@zokacstutorials73612 жыл бұрын
I don’t know
@cristhianmoreira92403 жыл бұрын
Hola amigo q tal cómo está me podrías ayudar con la actualización más moderna porfa q tengo problemas con una Ford Explorer
@trojangpete82 жыл бұрын
Testman runtime error? any suggestions
@zokacstutorials73612 жыл бұрын
please explain, when "testman" error occurs ?
@trojangpete82 жыл бұрын
Everything is installed already and it worked well the first time I used it. Test man runtime error occurs when I try to start a new scan. It does not connect with the pcm, instead it the error comes up.
@zetaretikuli15452 жыл бұрын
@@trojangpete8 do yo start ids using ids patch? every time you must run using patch...
@tomski64713 жыл бұрын
Are u able to flash with this software?
@zokacstutorials73613 жыл бұрын
Sorry, I don't know. This is simple tutorial how to install Ford IDS, all options you must try yourself.
@jehielcordoba40383 жыл бұрын
great job, subscribe
@michaelholm25343 жыл бұрын
this wont work get a blue screen
@zokacstutorials73613 жыл бұрын
Can you explain ?
@gayanathwhaidyasekara15273 жыл бұрын
When after double click on patch error massage appear “failed, Please try again : 1” Then I had ok and open the IDS but its not Establish with vehicle communication properly Blue screen appear and nothing happened.
@greasemonkeygaragesd2 жыл бұрын
@@gayanathwhaidyasekara1527 Did you get a fix for this? I am having the same problem
@respawndaddy3 жыл бұрын
Hi! Great tutorial, thank you! One problem thou, when startng the patch i get a error message Failed: Please Try again:1 Any suggestions? Followed the tutorial by the second :)
@zokacstutorials73613 жыл бұрын
When you have error "Failed Please Try again: #", just try few more times to start patch. Patch will do the job.
@2WhiteHorse8 Жыл бұрын
@Shloomo Al Korbi What network do you mean? The wifi/internet network OR something else?
@user-ky7ty3ie1x10 ай бұрын
Why asking dealer code
@renzosilva26852 жыл бұрын
Se puede instalar en cualquier Windows
@trojangpete82 жыл бұрын
solamente windows 7, 10, y 11.
@manuelgomez98532 жыл бұрын
where to download VCISDK?
@zokacstutorials73612 жыл бұрын
Are you serious ? Turn on CC (subtitle) and read first few seconds of the video
@javierhenriques88762 жыл бұрын
Hi you have mazda ids 120
@zokacstutorials73612 жыл бұрын
Sorry, no
@gayanathwhaidyasekara15273 жыл бұрын
Could you please share a Mazda IDS full one Please Thanks
@zokacstutorials73613 жыл бұрын
Sorry, I don’t know how to do that.
@ahlikuncibulukumba43862 жыл бұрын
is this method still valid today?
@zokacstutorials73612 жыл бұрын
Yes
@michaelholm25343 жыл бұрын
no one uses windows 7 no more no windows update or security update no more I only use even on my old laptop windows 10 64 bit
@smithsiptv26543 жыл бұрын
Hi thanks for video but will this work on ford vcm 2 clone like original PCB as when i patch v119 i couldnt get it to connect the vcm on manger for some reason. Thanks please can you comfirm
@zokacstutorials73613 жыл бұрын
Hi, this method installing ford IDS software work with VCM 2 clone, but you can't use patch V119. You must use ids patch 120 (link in the description). And you must install VCI SDK BEFORE VCI Manager. If you don't follow tutorial step by step, you must reinstall Windwos OS, because drivers are messed up.
@smithsiptv26543 жыл бұрын
@@zokacstutorials7361 thanks i will give it a go now
@smithsiptv26543 жыл бұрын
Mate all works fine so far big shout out to a real installation video that works on on the real ford vcm2. Can i ask you mate have you the calibration files update? Or how can i do this thanks again
@zokacstutorials73613 жыл бұрын
@@smithsiptv2654 Sorry, I don't have new or any calibration files, but I'll answer in a couple of days
@smithsiptv26543 жыл бұрын
@@zokacstutorials7361 hello again, i have tryed to install on win7 64bit and getting error that java is missing when installing vci software. But i have downloaded and installed latest java for it but keeps saying need 32bit. Have you vci software for 64bit or have you a fix thanks
@renzosilva26852 жыл бұрын
Usted me puede instalar el programa
@zokacstutorials73612 жыл бұрын
Sorry, no. I dont have time.
@trojangpete82 жыл бұрын
Sorry still figuring things out. My VCM II clone says only supports Win XP sp3. My clone does not allow me to put into recovery mode. Will this still work?
@JohnDoe-hg9pj2 жыл бұрын
Im having the same problem with mine not going into recovery mode. Did you end up fixing it?
@trojangpete82 жыл бұрын
@@JohnDoe-hg9pj I wasn’t able to fix the issue. I ended up returning my VCM and getting another one. I’ll see if this other one works when it arrives. Also I got a windows 7 computer since the video is showing a win 7
@zokacstutorials73612 жыл бұрын
it works with Windwos 7, 8, 10, 11 x86 or x64
@dragoljubpetrovic20492 жыл бұрын
Hi sve islo OK u 6:18 no vci Detected, pratio sam pazljivo sve Win 7
@edilsonmarcosdacosta14943 жыл бұрын
Ola vende uma cópia desse programa
@zokacstutorials73613 жыл бұрын
I am not selling this program, see the links in the description.
@jessicaneill80513 жыл бұрын
@@zokacstutorials7361 hi please can you help the patch file does not seem to be in the diwnload
@zokacstutorials73613 жыл бұрын
@@jessicaneill8051 turn off your antivirus software.