Ford Ignition Switch Fix - Intermittent starter signal, high resistance in a 1971 Ford Maverick

[@grady1807]

Thanks for posting this !

[@dominiccannistra]

Would a symptom at the time be that you would get just the starter spinning but not pushing the bendix all the way out. I replaced the switch and still get intermittent starting. I’m between something being wrong in the harness to the switch or my flywheel is toast….

[@BuildAMav]

Have you tried manually jumping the starter with a wire to see if you get engagement? Depending on the trans you can unbolt an inspection plate and check the flywheel teeth without removing the starter.

[@grady1807]

Thanks for posting this!

[@BuildAMav]

No problem!