Nagyon hasznos videó, már meg is csináltam! Köszönöm Roland!
@SulyokRolando6 жыл бұрын
Szuper! Nagyon szívesen! Kérlek jelezz vissza, hogy működik-e.
@human57805 жыл бұрын
Kitűnően működik, sőt 2 ismerősöm (mindkettő taxis Pesten) a videód alapján szintén megcsinálták, nekik is szuperál!
@cuibus089 ай бұрын
Hello , I wanna connect a led regeneration for my ford c-max 2015 2.0 ; I found the relay probably with this description : R3 Diesel particulate filter vaporizer; please confirm that this is the relay and of course I should connect to no 5 pin . Thx
@masmers672410 ай бұрын
Plz, I have Mondeo mk4 F/L 2011, I made all by video but relay R4 is missing, so where I can connect it?
@carlosfreitas6746 Жыл бұрын
Hello, I try to do this instalation and the led is always on. Mondeo mk4 2010 - before face-lift.
@pichacker7 жыл бұрын
Please not that this only works on vehicles that have the vapouriser unit. DW10-C variants. (FL) Also you need to be careful with your wiring and please fuse the lead near to the relay as there is a lot of current available in that circuit. If the wire grounds, especially the thickness used in the video, you'll have a fire in the wrong place.
@SulyokRolando7 жыл бұрын
You're right, thanks for the comment.
@gavintuson4757 жыл бұрын
Regen light mod os a ganyastoc idea...What fuse rating wpuld you suggest?
@gavintuson4757 жыл бұрын
What I meant to say was having a Regen mod done is a fantastic idea, but what fuse rating would you use? Stupid predictive text
@steve.edwinakenyon8247 жыл бұрын
According to the Fusebox diagram, this Relay controls power to the Glow Plugs. Can you explain your electric operation?
@SulyokRolando7 жыл бұрын
Inside the Vapouriser (dpf) is a small glow plug.
@jakubemilia91994 жыл бұрын
Hi Sulyok. Just wonder if youre able to see the finish of the regen. Signal for this 5th pin starts and stops regen with impulse - am I right? Thats why you used relay led ?
@SulyokRolando4 жыл бұрын
Do not stop the car while regeneration is in progress. Thus, the particle filter will have a long service life. Relay switches regeneration.
@tomaszroj23074 жыл бұрын
Hello. Ja there the same procedurę for the Ford grand C-Max 2.0. Can you Ask for a tutorial? And where did you lead the wire?
@FreedomMatter7 ай бұрын
How to install DPF combustion start-off button?
@hollandr715 жыл бұрын
Facelift/Mk4.5 only! Preface/mk4 doesnt use vaporisor so no relay to connect to
@kierenaubrey91563 жыл бұрын
Mines a Mk 4, worked fine
@maovi76526 жыл бұрын
So this is vaporizer relay? I would like to do this in Kuga mk2
@filtro-d-aire68436 жыл бұрын
I have the 2011 2.0 tdci 140hp, and I'm thinking to put a wireless 12v trasmisor to not have to pass a wire, with a led lights receptor inside the habitacle. Do you think could be neccesary a fuse? Not wired instsllation, only the transmisor inside de fuse box. Thanks
@SulyokRolando6 жыл бұрын
Fuses must be on both sides.
@FreedomMatter2 жыл бұрын
how to manual active the dpf regeneration?
@CitarNosis317 Жыл бұрын
You can do it with a proper ELM327 adapter (like OBDLink) and you can use FORScan on a laptop/Android phone to activate it by hand.
@FreedomMatterАй бұрын
@@CitarNosis317 I mean It's not static regeneration, it's dynamic regeneration activated on the road
@tomtom80527 жыл бұрын
Congratulations idea. Could you write, what is the function of the relay in Mondeo? I would like to install the control LED in Megane II. Thanks in advance.
@SulyokRolando7 жыл бұрын
en.wikipedia.org/wiki/Diesel_particulate_filter
@Iregboy5 жыл бұрын
Szia. Focus 2012 esben szeretnék ilyet. 1.6 tdci. Van tipped?
@SulyokRolando5 жыл бұрын
Szia, sajnos nincs, de tuti egy relé lesz ami vezérli csak azt kell megtalálni.
@gabortakacs53955 жыл бұрын
Hello, sikerült megoldást találni 1.6TDCI motornál?
@SulyokRolando5 жыл бұрын
@@gabortakacs5395 Szia. Max szerviz tudja megmondani melyik relé lehet az.
@lajosnagy622510 ай бұрын
@@SulyokRolandoszia ❗ 2012 TDCI ugyanide kell kötni ? Ellenálas kell ?
@hetman844 жыл бұрын
Szia, nagyon érdekes és hasznos a videod. Említette a szerelőmnek mert cirka 1 év alatt kétszer szívtam be hogy kiégetés közben sikerült visszalasítani. Most gondolkozom hogy ez vagy a folyamatos OBD figyelés. Canbus rendszert ez nem zavarhatja be?
@SulyokRolando4 жыл бұрын
Szia, Nekem 4 éve van bent és semmi bibát nem generált. Szerintem ez a legegyszerűbb és legjobb megoldás. Menet közben egyből látom, hogy bekapcsol ilyenkor fontos, hogy még motor féket sem szabad használni, tehát el kell térni a megszokott vezetési stílustól amikor bekapcsol. Az a lényeg ha legalább alapjárati üzemanyagot kap akkor végig tudja vinni a folyamatot. Sokan mondják, hogy felesleges, mert a fogyasztásból látni amikor bekapcsol, de kizárt az ilyet menet közben figyelni és a motor fékezés miatt is meg szokta szakítani a regenerálást. Egy szó mint száz amikor bekapcsol egy fokozatot visszakapcsolok és figyelek, hogy ne használjak motorféket (max üresbe teszem). Remélem tudtam segíteni.
@abutw05 жыл бұрын
Good Idea - am I correct in thinking, the LED lights during regen (under normal driving) and goes out once process is complete ? Nice to know when Regen is taking place, so you can continue to drive until LED goes out. Plus it is good to get a 'visual' that a) it is happening b) frequently. I have a 2010 Mondeo Titanium X and after moving house it does not get driven much at all, instead lots of very short town-trips; I find myself taking the car for a drive just to encourage the car to regen every two weeks or so - however after a few weeks of NOT doing this, I got the engine light and low power symptoms; long story short & €950 later I had the DPF washed, Injector replaced and new diff pressure sensor fitted. The car is perfect for me only for the fact it is a Diesel....so I want/need to keep for another 2-3 years. This hack is welcome for me as I could now monitor DPF regen activity. Is there a hack that will report OBD soot levels to a Red Dashboard LED ... ??
@SulyokRolando5 жыл бұрын
That's right.
@KlausTinos7 жыл бұрын
Hello how actually this works? you just connect the led with the fuse? And how it works?
@SulyokRolando7 жыл бұрын
Yes it works. LED will light when the regeneration is running. The part of the relay Led + join with 5 contact. The part of the LED - join with GND. (Do not use fuse, you need relay.)
@Johaidiiii8 жыл бұрын
Hi! Good idea. How much Watts need for Led Light bulb?
@SulyokRolando8 жыл бұрын
Hi! Watts is not important only 12V.
@ihrdlick3 жыл бұрын
Does anyone know how to do it on Fusion/Mondeo 2017?
@pelagiuszszixtusz11516 жыл бұрын
Az a relé az mit vezérel?És amikor kigyullad a led akkor mi lép működésbe?
@SulyokRolando6 жыл бұрын
A részecskeszűrő regenerációját vezérli. Amikor kigyullad a lámpa akkor nem szabad leállítani a motort és ha lehet akkor 2500as fordulat felett tartani, hogy a lerakódás ki tudjon égni. Amennyiben a rendszeres regeneráció nem tud lefutni hamarabb tönkremegy a részecskeszűrő ami elég drága költség. Mivel a lámpa hiányában csak akkor tudsz róla, hogy regenerációt végez az autó ha folyamatosan nézed a pillanatnyi fogyasztást ami ilyenkor egy picit megugrik ezért hasznosabb a lámpa jelzése szerintem.
@pelagiuszszixtusz11516 жыл бұрын
De ha jól be van kötve a led , jó lábra de ennek ellenére a regen közben nem világit ,vezeték ,led ,oké,akkor az milyen hiba lehet?
@SulyokRolando6 жыл бұрын
Első körben a ledet cserélném egy normál 12V izzóra, megnézném a relét valóban működik-e. Jól oda lett forrasztva a vezeték a reléhez? Biztos, hogy végez regenerációt az autó? Mennyit mentél vele a beszerelés óta?
@pdurkmer31574 жыл бұрын
Hi i have ford mondeo 2.0tdci 2008, and i try instal led lamp but lamp always is on
@gafcaf4 жыл бұрын
Mk4 does not have vaporiser, only 4.5 face-lift
@kierenaubrey91563 жыл бұрын
@@gafcaf Worked fine in my 2010 2.0 TDCi Mk 4
@syristemilan38086 жыл бұрын
It is normal for a moment to shine with a glass?
@SulyokRolando6 жыл бұрын
That is normal when you open the door.
@syristemilan38086 жыл бұрын
Thanks for the answer tomorrow I'm trying to be open:) I'm still interested in what the relatko is? It works reliably, only today I did this under your instructions, thank you.
@rubenc71206 жыл бұрын
IS posible install in a Transit Custom 2016?
@SulyokRolando6 жыл бұрын
I do not know.
@attilabudai37767 жыл бұрын
Próbáltam nekiveselkedni, de zsákutcának tűnik az átjutás az utastérbe. :(
@SulyokRolando7 жыл бұрын
Anyós ülés oldalán be lehet jutni csak ne add fel. Van egy köteg ami ott megy be mellette el tudod vinni a kábelt.
@titaniustitanius53737 жыл бұрын
Caw. Będzie również pracować przed FL? (Mondeo 2008) Dziekuje
@SulyokRolando7 жыл бұрын
Hi, I don't know.
@cwaniaKpoznaniak7 жыл бұрын
Titanius Titanius Nie
@slavuskin7 жыл бұрын
Takže na 2008 to treba inak urobiť, alebo sa nedá vôbec ?
@premyslhruby90957 жыл бұрын
mělo by to jít taky. Komunikuji s borcem, který to nainstaloval letos přesně dle onoho návodu (bez pojistky) na S-maxe 2007. Sám nyní instaluji do Ford Galaxy, rv 2008, 2.2 TDCi, EURO 4
@slavuskin7 жыл бұрын
ja to chcem na Mondeo 2.0 TDCi 103 kW r.v.2008, podľa toho čo píšete by to malo fungovať, akú ledku treba dať ? Ďakujem.
@BobWilliscorgi7 жыл бұрын
No point to any of this at all? I just use a bottle of Wyns DPF cleaner additive only £11.20 from eBay, and add to my fuel tank every 2000 MLS and have had no problems whatsoever! I only drive short local trips and it works great, when I first bought the car, after about a week the engine management light appeared and it was a DPF problem but using the additive regularly has cleared it permanently. 🤗 Ford would've built this light into the dashboard if it was necessary, I personally wouldn't muck about with it and bodge it like that unless you want to cause a short-out or fire under your bonnet!😬
@SulyokRolando7 жыл бұрын
Thanks for the comment.
@enquire4226 жыл бұрын
Thanks Batman!
@andyb51875 жыл бұрын
Or just buy a car suitable for your needs. These diesels are for longer journeys, not short trips to the shop. If thats what you need a car for then buy a 1.0 petrol. 3 years and 70k miles and ive never noticed my 2.2 mondeo do a regen. If i no longer need to do lomg journeys I'll buy a petrol, simple.
@gragall787 жыл бұрын
cant see the point in all this, why do you need to know when a regeneration is happening?
@SulyokRolando7 жыл бұрын
How it works and why the light may come onThe Diesel Particulate Filter (DPF) is part of your exhaust and controls the 'soot' that would otherwise be expelled from the system. You may have noticed that modern diesels no longer leave you in a cloud of smelly black smoke when they accelerate off.The filter collects a certain amount of these harmful deposits and then burns them off at an extremely high temperature (450 degrees c). In normal driving this will happen without you being aware but on continued short journeys the particals can build up and remain 'stuck' in the system. It's at this point the warning light will come on and your intervention is required. How to clean, clear and reset (regenerate) the systemYou should drive your vehicle for approximately 5-15 minutes (While the lamp is on) keeping the engine revs between 2000 - 2500 rpm. This is probably best done on an A road. Keep the car in a lower than normal gear (use 'S' on an automatic) in order to keep the revs up.
@sdgelectronics6 жыл бұрын
There isn't any requirement for keeping the engine revs in any particular range on this vehicle. DPF regeneration is all closed loop on the exhaust. So long as the engine is running the regeneration should be successful.
@videoequipped4 жыл бұрын
Absolutely pointless 😄 you don't need to know it's doing it and it works on short journeys and even in traffic.