The Best Trigger Sprayer on the Market

IK multi TR1 sprayer
tinyurl.com/t7znj3sw
IK HC TR 1 (solvents)
tinyurl.com/muyarrh5
Kwazar Mercury 360 sprayer
tinyurl.com/4r6dxamy
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2687409/1012495/12764
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
www.patreon.com/forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
***TRY DISCOUNT CODE FORENSIC FOR 10%***
Pre-Wash Snow Foam
tinyurl.com/y8xnhp2l
Shampoo
tinyurl.com/ybk8guwb
All Purpose Cleaner
tinyurl.com/ydxd2orh
Fallout remover
tinyurl.com/yatmso96
Tar and Panel Cleaner
tinyurl.com/y9ttdbqb
Clay Bars
tinyurl.com/y7ggze7z
Clay Lube
tinyurl.com/ycu4stm3
Paste Wax
tinyurl.com/ycy629nb
Drying Aid/QD Concentrate
tinyurl.com/ya5ralad
Sealant
tinyurl.com/yagvpxxe
Detail Spray
tinyurl.com/ydamwfs8
Water Spot Remover
tinyurl.com/y9wczlco
Tyre and Trim Dressing
tinyurl.com/yb6fopsj
Machine Polishers
tinyurl.com/ybpsrvjj
Polishing Pads
tinyurl.com/y8j8nhsp
Polishes
tinyurl.com/y9yd5zzx
Panel Wipe
tinyurl.com/y8vcnxj3
Microfiber Buffing cloths
tinyurl.com/yaau8m97
Twisted loop Drying Towel
tinyurl.com/ybr3nhmp
Mini Plush Drying Towels
tinyurl.com/ycykoxep
Wash Mitts
tinyurl.com/y7vqlx74
#forensicdetailing #detailing

[@chrisdnz7]

you know that youve gone as far down the detailing rabbit hole as possible when your watching a video of someone talking about trigger spray bottles on a Saturday morning

[@forensicunplugged4295]

give it another few months and the rabbit hole will come out the other side in Australia :)

[@chrisdnz7]

@@forensicunplugged4295 Iv just realised in2detailing you always talk about is beside me in Dundee :-) result - will have to go check them out

[@SuperchargedLlama]

I just watched 15 mins of someone talking about trigger heads and it was in two sittings....!meaning I came back to finish it.

[@nickaf5262]

I have spent so much money and John’s to blame for all this 🙈

[@Dustii91]

Oh agreed, I'm in deep!😂❤

[@ObsessiveCarDetailer]

Some great points made Jon & that just goes to show just how little these manufacturers actually look at the user experience. My biggest gripe and anyone who watches my channel will tell you is the crap spray heads on some brands. To the point where I will not buy a good product because the spray head is so poor. I just don't understand why a product manufacturer puts a lot of money and effort into a product and then throws a cheap rubbish spray head on the bottle. I recently condemned the spray head on a bottle from GBDetailing and as you can imagine got lots of grief for it but GBDetailing actually came back to me and agreed and said they were in the process of changing the heads. Lots of people said don't moan just put a different spray head on the bottle but I refuse to pay good money for a product and then have to pay again for a spray head. As you identified GT provide good spray heads and you can but the product with or with out to save you money. A really good video on a very worthwhile subject close to my heart but then I am a sad git anyway. stay safe

[@forensicunplugged4295]

yer theres those tiny little triggers with low output. the reason they are used is because they are very very cheap. typically a decent trigger is about 50p-100p if you buy a lot.Some are more expensive. I can understand the little hobbit triggers on the tiny bottles or samples or products which require low output, but when they are used on detail sprays or fallout removers or wheel cleaners when you want the through-put, well its hard to argue a case for excellence (which is wheat detailing is supposed to be about). the only argument is a hobbit trigger is being used for cost saving. In which case the product needs to be cheap so we get the cost saving. If its a premium product and premium price tag but has hobbit trigger, generally I agree I am less likely to buy it because I see it more a case of a brand trying to increase margin at the expensive of user experience. To be fair Ive seen brands move away from the hobbit triggers which is great and its the sort of things reviews should pick up on. lots were using them 3-4 years back.

[@Irish-caddy]

Definitely design your own. Ill buy 10

[@SuperchargedLlama]

Autosmart bottles with their grey chemical resistant triggers work well I find. The best bottle combination I've found is actually the Dettol kitchen cleaner ones, so I use them. TARDIS seems to eat every single trigger out there, even of it's chemical resistant, so I just use these for that now.

[@nuttyslack]

Triggered by the details! Cheers for the vid, John.

[@AntEloftheHouseofEl]

Personally, for high volume application, I use the Marolex ergo master 3000 pump sprayer and the Bilt Hamber bottles for controlled application. Although I will be getting one of Ammo's pivot bottles when they are out too.

[@robsx4280]

Interesting video Jon. I have selection of spray heads that I switch between bottles. Hard to beat the BH ones. Can we do gallon pump dispensers next please 😄

[@johndibiase882]

I am moblile detailer in the US. with so many detailing videos your one of the best

[@forensicunplugged4295]

thank you john really appreciate the kind words mate guys like you rock.

[@kinnonmcallister]

I wait until my Fabreze fabric refresher is empty and use those bottles or Turtle Wax Hybrid Sealant bottles or Elbow degreaser which you can buy for a quid and pour down the drain. All have excellent trigger spray patterns and triggers. It's dearer to buy empty trigger bottles from any detailing site 👍🤷🏻‍♂️🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@craigfreeland96]

I've found the spray bottles from Auto Finesse work really well especially on their 500ml bottles. Good grip and very comfortable!

[@owensteele1274]

Thank you Jon for such a funny yet very informative video about a topic that isn't covered very much. I know YumCars do those black Valor triggers but their dilution bottles are only half-litre ones. Very good quality and price, though, with a next-day delivery service as well. Also, ValetPro do Bilt Hamber Laboratories-style one litre dilution bottles, I'm not sure if the BHL Opus heads fit though or not. But the Cannon ones do fit and the bottles are great value. And Slims Detailing offer Chemical Guys dilution bottles in 3 or 5 packs with the grey Tolco heads that are worth a look. Generally, whenever I run out of a Bilt Hamber Laboratories product that comes in a one litre spray bottle (like Auto Wheels and Korrosol) then I like to remove the label, thoroughly wash out the bottle and trigger and keep hold of it for something else in future, as a spare dilution bottle.

[@willmaddox1986]

John the valet Pro bottles are brilliant, you should try one, they are squared of like bilt hamber bottles but with a very high misting adjustable nozzle.

[@jhby1956]

I have a couple Ik bottles that I use to transfer my Bilt Hamber from the jugs. Love the bottles, hate the triggers.

[@nathanstupple3848]

I reuse any shower spray bottles, meguires Bottles are great quality their hot wheels bottles are great to repurpose I have had one years use them for APCs etc mists well and free in effect . Cheers good topic

[@aaronhooper7626]

Where did you get Your liquid contains with blue taps from

[@AYZEEStudios]

jerry can with tap

[@MikeAllan89]

I bought an IK spray bottle to try out, and have seen others complaining about the fin on the back digging into their hands. I've not found it to be an issue though so going to buy some more. I must just have tough skin 😂

[@PhilPesteyMarshall]

Slims detailing do an excellent dual sprayer, bought 5 of them and love them to bits

[@A7mag3ddon]

Is that their own branded one at 5.99? Looking to try a couple myself.

[@rheijne95]

The Kwazar sprayers are great, when they work. I love the 360°, and Actually like the rattling haha. However, I bought a 5-pack of them, and only one of them sprays properly. The others just don't spray the way I would like them to. The IK sprayers are bulletproof and really consistend. I've got 10 of them, and all perform equally awesome.

[@danlc95]

Thank you for the heads up. The Kwzar I use for Optimum Power Clean, it's trigger is acting up. Time to try something else!

[@rheijne95]

@@danlc95 I don't have any experience with the new IK-sprayers, which are more ergonomic and 360°. However, all I use now are Tolco 320(CR) for my trigger sprayers, they are awesome.

[@allisatum4081]

Where can I buy those containers on your shelf with the blue taps at the bottom - they all stacked side by side - thanks

[@rickardkevaanranta7808]

Glad someone are like me a nerd on triggers and bottles. I have 10 of the Canyon jumbo models and hate the sharp fins. And they require quite lot of liquid in the bottle to suck it up. I have 2 of Canyon Arata and they have good ergonomics and are great reliable. Check those out! Then there is CANYON CHS-3ANS coated! Like the standard one with a case over it. But the detail on square bottles is just genius for storage! Haven't thought on that. This is gonna be my new mission also!

[@KiranPatel-fk1pg]

The Jumbos definitely need to have the edge sanded down

[@forensicunplugged4295]

@@KiranPatel-fk1pg I cant understand how they can get through like the "testing" phase of any design process. It literally marks up your hand with a full bottle you literally damage your skin within 10 minutes.

[@doublesdetailer7709]

Try wilco autosave. I got a dual action sprayer (round) and was ok for the money. Plus Poorboy's glass gleaner. Bilt hamber is a lovely square bottle sprayer. You need to make a nylon resin cast of your hand and the trigger. Good old days of Maplin. They used to sell nylon casting pellet to make castings. Food for thoughts

[@Codriver72]

Valet Pro has a nice and cheap sprayer bottle. Good trigger and it reminds of the Bilt Hamber bottle.

[@vlko7514]

Can you please recommend which Kwazar trigger used for koch chemie felgenblitz fb for discs cleaning ?

[@bluerineimb1148]

Got a question to ask & who better to ask then you. I bought geyon wet coat after watching you review it & was wondering if I use that is there eny point useing a detailer or bsd

[@jamesshotbolt1005]

Anyone know if the Kwazar spray bottles are suitable for using an IPA panel wipe? I know they’re chemical resistant but I’ve seen somewhere that alcohol can cause an issue in these?

[@DjNikGnashers]

I had to pause at "it has a longer shaft, so you can get your hand around it". to chuckle. Sorry, call me immature but I love a good innuendo :-)) I bought a couple of hand sprayers from my local gardening centre, for spraying chemicals on the plants, and found they were as good as anything I could get from a car product distributer, for about half the price.

[@kevincampbell8298]

Larry at Ammo has some bottles made up like the BH bottle with tilting trigger. Not sure if they are any good or not but he is pretty particular

[@a.k1311]

You should try the Sonax foam sprayer.. mate!! You would like it!!

[@thesean68]

Hi Jon - where did you buy your shelf dispenser storage containers please. They look superb. Cheers

[@bmwn5475]

Would like to know this too 👍🏼

[@AYZEEStudios]

jerry can with tap

[@jamiewhite9988]

Hello Jon, Are the black canyon triggers as good as the genuine ik triggers? Thanks Jamie

[@gsbut]

My favourite triggers are the ones from the Turtlewax Hybrid Wash & Wax (yellow waterless wash). I use the product moslty as a sort of wheel QD, for a wipe over between washes. It's so cheap, I can use liberally and not worry. Anyhow the added benefit is the bottles and triggers in particular are exceptional. I keep my empties to reuse with other products. The value for money between the product and decent bottle is hard to beat.

[@forensicunplugged4295]

opus compression I think you mean. yes these are really good. they have the tiny little plastic triangle on top of them righ.

[@gsbut]

@@forensicunplugged4295 correct, the ones with the triangle. The same trigger is on the TW Dry & Shine and also the Sealant Hydrophobic Wax.

[@pat_rickb8523]

The Chemical Guys 32oz sprayers are pretty good have you tried them? You should definitely design your own! I sometimes like to hook the trigger into my jean pocket so the bottle hangs off me to free up both hands saves me constantly picking it up off of the floor, anyway a long trigger or some sort of hook would be a good feature.

[@David.M74]

What brand is your shelf dispenser containers greetings M from Belgium

[@D992]

The Kwanzar has balance issues too. I sometimes have to hold it with two hands 🤷🏼‍♂️

[@CwDetails]

I always keep all my bilt hamber bottles best I have found.

[@robsx4280]

Me too I have half a dozen hard to beat them

[@shabbytiger5528]

The weight on the suction straw allows you to use the sprayer at any angle.

[@damien_33]

The trigger on the blue turtle wax seal and shine bottle is a great trigger...very good spray

[@forensicunplugged4295]

opus compression that is I think

[@damien_33]

@@forensicunplugged4295 yes your right John...I find them triggers excellent. Another good reason for me buying bottles of Dry and Shine - can reuse the bottles for quick detailers

[@andrewspokes435]

Hi Jon, same question, where did you get the 5ltr liquid containers on shelf they look great and very practical. Regards Andy.

[@forensicunplugged4295]

coming soon mate you cant get them in the UK right now. Im seeing if imran can source.

[@gavmain1]

The rattle did my nut in. Similarly, I slid a piece of heat shrink tubing over the metal filter. It made a huge difference.

[@pincombe]

What are those liquid storage containers with the taps called? I must have missed the video where you talked about them but i'm really interested in getting a few to save some space on my shelves.

[@AYZEEStudios]

jerry can with tap

[@JoeBuck-uc3bl]

You want the best of the best of the best SIR!!!!

[@stussyexplores3272]

You should try the Auto Finesse Pro mixing bottle, great product!

[@christianb9666]

Can't believe I've spent this much time at looking at plastic bottles, but captivating

[@andhen12]

You can get the mercury without the 360 metall hose thing inside. Also in different colors so it's easy to separate different products. I have a blue, green, yellow and dark blue(high alkaline tolerant) super happy with them.

[@forensicunplugged4295]

like the martin cox versions of them powersprayers right?

[@andhen12]

@@forensicunplugged4295 yupp. Just something to keep in mind. They're not cheap though...

[@tonyosullivan2382]

Watching this on the couch while the missus is reading next to me. She shakes her head while saying men are weird. Me "don't even start" 😁

[@scottie3083]

Almost the exact same however my wife isn't as subtle....and I just get told "you watch some shit" all while she watches reality TV 🤯

[@tonyosullivan2382]

@@scottie3083 very true 😂 they just don't understand the importance of trigger sprayers. Its a very serious subject.

[@scottie3083]

@@tonyosullivan2382 hence why I clean her car how Jon cleans his golf 🤣... They definitely don't understand

[@tonyosullivan2382]

@@scottie3083 😂😂

[@PabloConcrete]

Boom! Like this, like that! 😃

[@JWL-UK]

Interesting to see the hype when the IK Sprayer came out at first and now we're seeing some of its fundamental flaws. Wonder if the designers ever used this bottle? Phil at Auto Fanatic posted a similar review video earlier on in the week. Great video, Jon. I'm glad I didn't spend the money on these!

[@KiranPatel-fk1pg]

The problem with the IK is that they're overpriced for using a cheap canyon sprayer plus I find even though the bottle is durable it's too heavy and bulky. I'd rather go pressol or empty pressol 750ml bottles and screw on a cheap canyon sprayer

[@Deviantsoundz]

This is what happens when certain people have other motives when doing reviews instead of doing an honest review.

[@forensicunplugged4295]

dont get me wrong though. I want something like the IK sprayer and I think 8.95 is ok. I will buy it. But that trigger is poor. Ive just watched the auto fantatic and I agree. You cant use it, it simply hurts your hand too much. So much effort went into the flask design its a shame the trigger is bad. I want a trigger with a proper ergonomic tail. I think the Vela will actually be the front runner and it will look decent on it as well. I have more bottles coming in.

[@Deviantsoundz]

Some places sell them for 16 dollars here in the states which is Iike 11.50 pounds. Some others have them for 13 dollars.

[@jawad5867]

Jon have you considered printing a label or something similar of a scale & stick it the side of the Bilt Hamber bottle?

[@forensicunplugged4295]

can do this but I want higher bling level :) I know its sad but I want top draw bling factor.

[@Deviantsoundz]

You could add an o ring to the Italian trigger to make up for the gap. It might still not feel right with the bottle as it is a stubby trigger.

[@forensicunplugged4295]

you can get them in 28/400 which should fit i think

[@jaykuykendall7660]

Matt with Obsessed Garage has also been struggling with this for years! I’ve ordered about 20 or so of the Pressol bottles from him so far and have been pretty pleased with them, but they are by no means perfect.

[@forensicunplugged4295]

i dont think there will be a perfect but theres a lack of elite options so im looking forward to trying the pressol, it looks very nice.

[@jaykuykendall7660]

@@forensicunplugged4295 Looking forward to your findings as well. Never knew finding a spray bottle / trigger that was “just right” would be so difficult! Thank you for your efforts!

[@ObsessedGarbageDotCon]

My 3 pressol bottles started leaking from just using gyeon prep. Drove me nuts spending that much and then being told it is what it is no luck getting new tips or anything.

[@frzen]

The new bilt hamber 1 litre bottle is not ergonomic like that one you have there which is a shame

[@georgecleal4933]

Are the Kwazar’s fine to use with fallout removers? Didn’t know if it affected that metal weight, was planning to get a few, one for Surfex, Korrosol and then maybe a clay lube.

[@forensicunplugged4295]

i think so yes. they have a solvent version as well i think. IVe been using my kwazar with fallout for a year or so.

[@supersliicks725]

Delta clean bottles on amazon looks a good fit in the hand, only 500ml tho

[@paulphillips2941]

Have you tried the grey tolco sprayer heads? Loads of companies sell them for a few quid each and theyre pretty comfortable 👍 also the plastic bottle company sell all kinds of bottles and triggers might be worth a look

[@forensicunplugged4295]

yes decent but dribble is a problem.

[@Adam-lc3is]

I've gone through the entire range of triggers and tbh they always end up the same... broken. I usually end up on the in2detail ones as they're a decent balance of quality to price

[@r1gav]

Carpro or Koch Chemie bottles and triggers work for me 👍

[@MrTitaniumBG]

A good label system is needed also

[@kendalmyers9445]

The zep sprayers are the best in my opinion.

[@loman0071]

Cool vid John why don't you talk to bh about doing a premium sprayer?

[@jonathanmickleburgh8745]

Where do you get the Containers on your shelf

[@benhatcher3017]

Have a look at the bottles that AMMO guy has designed. Could make an interesting video if nothing else.

[@juantascon]

Have you tried Pressol? Not sure who distributes them in UK. @obsessedgarage is the exclusive distributor for the states. They are a German company I believe. 750ml bottles are my new favorite.

[@benhook1850]

I like the Tolco sprayer heads. cheap and decent quality

[@yanniobkirk5744]

This

[@TerrificFlow]

Different experience with theml. They were good on some bottle (grey one) and were trash on some product (black ones). They were actually leaking right from the beginning and missing spray half the time.

[@benhook1850]

@@TerrificFlow I must have been lucky with the ones I got

[@TerrificFlow]

@@benhook1850 yeah i agree, it seems quality differs from one batch to another. Some fail, some actually hold up for years...

[@LoveLikeaHurricane]

The problem with the Kwazar is when it is heavy with liquid the head the sprayer eventually detaches from the rest of the bottle

[@g40nut]

Look at the pivot tools from Ammo

[@reddog6256]

You should design one yourself, brand and manufacture it. No kidding. I will buy it.

[@mikethomas8782]

Now going to have a look under the sink to see what products the wife uses around the house,never heard her complain about triggers though. There must be something that's being used that isn't car related that can be transferred onto a decent bottle, maybe a trip to the supermarket is on the cards.

[@gazzasbike]

Been trying to find the empty bilt hamber style as love there bottle and trigger with no luck as yet

[@jamiejack764]

Jon you should bring your out your own product line, I for one would buy from you. You should invent a trigger

[@forensicunplugged4295]

Forensic Detailing 1900:1 shampoo :)

[@nicholaswirth1011]

Vela triggers from Italy are my favourite. So much so I brought a box of 100 incase I could never get them again. Comfy in the hand and last a real long time. As for bottles the ergo ones are ugly but stack and feel good in hand.

[@forensicunplugged4295]

low throughput on the vela mate. get tolco big blasters with the 4mm chambers think its tolco 803 big plaster is full name. thank me later :)

[@nicholaswirth1011]

@@forensicunplugged4295 you have me on the search for some! Thanks mate

[@nicholaswirth1011]

@@forensicunplugged4295 can’t find them in Australia, pretty typical, can only get the standard tolco triggers

[@bluerineimb1148]

I watched bids for 9 hours over 4 nights before I decided which foam to buy

[@TerrificFlow]

From the only one i know who is actually in business with a manufacturer about bottle and trigger (Obsessed garage and Pressol), cost are huge just to design the sprayer and you need big quantity for it to be worth it. And then you end up with a 15-20$ bottle and sprayer that are still failing and not perfect. It's a tough market that not many can get into. And from the pov of detailing brands, customer are not ready to pay the price for a good trigger/bottle combo that comes with the product. You will end up killing your margin and won't be competitive with similar product... I agree with you on the topic of style of trigger. I want some single spray for quick detailer/wax with good control. And some sprayer with big output like a double pump sprayer for wheel cleaner, apc, iron remover, clay lub... I also wanted at some point a sprayer that can foam, making it stick more to the rim for example. The ones i found are decent, but can't replicate the result i had with sonax wheel cleaner, or bh autowheel?

[@ObsessedGarbageDotCon]

Obsessed lied about there being different iterations. Contacted pressol directly and they said there were no different models or updates to their bottles. Obsessed garage said pressol made him version 1.2 or 1.3. Which is a lie

[@TerrificFlow]

@@ObsessedGarbageDotCon i would guess it's just some updated design of the initial sprayer, minor tweaking. For example the tips were breaking, they probably had to reinforce the threads.

[@AutoglymUK]

Sounds like you need a 3D printer or a rapid prototyping lab. Great insight, this stuff would be gold to the innovation department of any pump sprayer manufacturer - send it on to them, you never know you may get your own signature model like a guitar. Can't help thinking as I was listening, would a pressurised sprayer not meet many of your requirements? Mark

[@forensicunplugged4295]

canyon didnt even reply to the feedback mark. I can guess what they would think though. they already have ranges of ergonomic triggers with the casing around them. the CHS 3a and 5a are in their industrial range which have better through put. But they seem to ditch the casing and the ergonomics on the industrial range. the thing is they sell millions of these to millions of firms for different applications. the Detailing market of guys like me looking for an elite solution is tiny. Ive literally ordered about 5 other options since these videos they all have a compramise. But I believe theres a market for a square based Obelisk type version of the IK sprayer bottle with the ergonomics of the opus compression and the flask grip type bilt hamber use. The final thing is the trigger. Ive searched high and low I want the through put of the CHS5a trigger (and single action) but the ergonomics of the vela or the opus compression. Ive tried the pressol and the powerspray but the double trigger looses control. I guess its really easy for me to waffle about what should be the best but designing it and taking it to market is a different ball game. I would probably loose a lot of money I could sell 500-1000 maybe but I would need to have 10,000 made just for starters. The only companies I know which make the "cladded" HDPE are gozpier and kwazar as well and they might not want to create rival products to their own. I think this idea was a dead duck before it started. But I do have some more to come on this.

[@forensicunplugged4295]

I use a pump sprayer for APC but things like glass cleaner, detail spray, decalar, interior APC etc etc.. 90% of applications I want a trigger sprayer for control over throughput.

[@asl4756]

John, I'm surprised there's no mention of marolex? After using all of them in your video I decided to give marolex mini white sprayer a try. A month later I ended up buying a wholesale bulk from an awesome Polish supplier for what worked out just over a couple of quid each (including postage). The spray output puts the others to shame I'm afraid, it's also very comfy full and incredibly robust .. Luckily this was just before lockdown and the EU price increase. Now my whole kit are all neat in the same bottles. Although I still have a few autosmart bottles hanging about. They're also very good from my local rep

[@forensicunplugged4295]

marolex use the Vela triggers I show in this video and then the flasks are sort of Ok. these are decent but not quite sexy enough. but yer these are good for the money. Im looking for perfect. I want a higher through put. So like the through put of the canyon 2.5, with the feel of the opus compression, not dual action, in a package that looks as good as the IK sprayer, but with a squared base so its good to store. I dont think what Im looking for exists as a trigger or a flask. Its just not there. Designing and making it would be a major undertaking for something so small scale. but Im convinced if I did it, it would be good and lots would want it. easy to say this though.

[@asl4756]

@@forensicunplugged4295 before I read the said line, I was thinking that you're trying to find something that doesn't exist, just like a decent cordless vacuum!! You should start making your own that way won't have to waste money on other bottles, which to most people is bonkers but a good bottle is very important. And while you're at it make a decent affordable air freshener.

[@kauan_gabriel_films3479]

Top 👏🏻🇧🇷

[@kinnonmcallister]

What did you use as your LSP on the BMW Jon? It looks phenomenal. I follow your channel closely but didn't see what product you used.

[@forensicunplugged4295]

its running Gyeon Wax and Gyeon Ceramic Detailing.

[@kinnonmcallister]

@@forensicunplugged4295 Thanks for the swift reply Jon. I should have guessed its not something I have in my arsenal. 🤦‍♂️ It looks dripping wet with gloss 😎

[@kinnonmcallister]

@@forensicunplugged4295 Gyeon Q2 Wax? It's so new nobody seems to be selling it yet!

[@forensicunplugged4295]

@@kinnonmcallister very soon mate will be available within a week

[@aimonecastellacci1618]

John Griots sprayers makes/come with one of the best triggers on the market- at least compared to what I’ve tried so far!

[@forensicunplugged4295]

yes pretty good they are like opus compression triggers I think. and nice PET bottles.

[@yanniobkirk5744]

Love the channel. Little too much camera motion though. Perhaps would benefit from a bit wider angle lens too.

[@forensicunplugged4295]

its a go pro mate. its just great for convience but yer looks a bit potatoe cam-esque

[@jeyomcnugget9584]

Ammo has bought out his swivel bottles. Interesting design. I’d love to see a review

[@forensicunplugged4295]

Its interesting and stalling is a bit of a problem but Im not sure I want the bottle swinging around like that, the weighted draw nozzle is perhaps a more pragmatic fix to the stalling due to the liquid level changing it gives you "enough" tolerance". dont know though, you sort of can only guess untill you try them properly maybe its really good.

[@01123581321341]

Love the AMMO channel - there’s no UK distributor if i’m right ?

[@forensicunplugged4295]

@@01123581321341 correct.

[@01123581321341]

@@forensicunplugged4295 yer i’d give some of their products a try but too tight to stomach the delivery cost ! If you ever do your USA trip bring some back 👍 don’t worry FDC is still my no.1 channel 😂

[@jeyomcnugget9584]

I’ve been looking at ammos products to see if they’re up to the standard they say that they are. Could not do the import costs tho 🤢 some of the things defo look interesting

[@_Steven_S]

Grey Tolco triggers on "handi hold" bottles for me. Angelwax (and the small Nanolex bottles) probably has the worst trigger imo 😐

[@99tisard]

I’m sure as one of Bilt Hambers biggest brand ambassadors on the You Tubes, if you asked them who manufactures there bottle? they would be more than happy to point you in the right direction. Just a thought. Keep up the good work Jon.

[@teemukaapola1617]

Valetpro bottles are square shaped and the triggers good

[@forensicunplugged4295]

they look like canyon triggers bad ergonomics. flask looks good though but basic.

[@RandomlySet]

Easier and cheaper to produce round bottles. They'll be blow formed or whatever the process is called, similar to pop bottles I imagine

[@MuscleFlexPro]

I religiously follow you John

[@forensicunplugged4295]

Amen to that!

[@savgraovac6911]

Man up John 😂

[@grenphelps7455]

Get some high density foam and fill in the hole at the back end of the bigger ik sprayer and you can get any color foam to suit your needs 🤦‍♂️🤷‍♂️

[@TruckerMatty93]

Should look at ammo

[@swift2117]

Ergonomics !

[@marcjarvis3975]

Have had a look at the Pressol sprayers?

[@forensicunplugged4295]

Im looking yer these are gonna be great but I may not want the dual action trigger.

[@KiranPatel-fk1pg]

Pressol will be the best option I think. The clear bottles look great and 750ml to me is the perfect size so it's a bit lighter and nicer to use. If Jon doesn't want double pump trigger he can just screw on a canyon trigger (the one the IK uses)

[@ObsessedGarbageDotCon]

Pressol sucks

[@RandomlySet]

Form over function or function over form 😉

[@RobertSmith-di5ll]

I think Chris Dunsmore (below) has a point - but as they say "Whatever floats your boat"

[@dipeshpankhania]

Big blaster at Elite Car Care

[@forensicunplugged4295]

they use the 3.5 ml head version of the tolco big blaster theres a 4.0 ml version you can get on ebay which Ive ordered. same trigger but higherthrough put. insane throughput actually I have high hopes for this one.

[@dipeshpankhania]

@@forensicunplugged4295 where did you find those John? Got a link or search term? Mine have just come from Elite for use with Wheel cleaners and degreasers, fed up of pumping lol

[@MuscleFlexPro]

Why don’t you project and develop and sell your own ultimate spray bottle?

[@AndrewGibson22]

Basically you need John Browning to design a trigger sprayer in .45 cal

[@AYZEEStudios]

If your asking about the containers, they are called (jerry can with tap) you can thank me later

[@NipponStiqqyPaint]

The thing I took away from this video - Dad needs to start karate chopping wood blocks to strengthen his hands

[@vonniev0n]

Chs-5a trigger.......where can I find it?

[@forensicunplugged4295]

slims detailing (search for koch triggers)

[@vonniev0n]

@@forensicunplugged4295 "Martin Cox Chemical Resistant Trigger Head" what about that one?

[@HantsLeo]

Very obvious but it took Jon to point it out to me lol

[@barrydavid8331]

I just keep my old BH trigger spray and bottles,why use anything else.They don't hold loads,which helps,but yes,needs filling more often.

[@forensicunplugged4295]

they hold 1000ml which is good. Theres a good case to say these are the most comfortable on the market and the through put is decent. stream only though.

[@charlesbardforth6738]

Why not get small hand pump sprayers? Can be cheaper, better on the wrist, better control and pressure.

[@forensicunplugged4295]

they good for high volume but not control.

[@charlesbardforth6738]

@@forensicunplugged4295 the kwazar mercury is my fav. What annoys me is the sheer size. I tend to hoard the carpro triggers and use them with existing bottles.