Forever Laser Transparent Application Demonstration

[@happylocksmith]

Very good video on using this paper unfortunately Forever have several videos on this paper which are all different from each other so very confusing, but you have explained everything in great detail, so I am going to give this paper another shot as I like the detail it gives from the printer. Thank you

[@veronicelectronic]

Great video, could you please advice on printing procedures of the papers using Oki8432 wt with black toner installed instead of the white

[@realdanman]

I'm getting really incosistent results with Forever Transparent, just when I think I've cracked it I do another press and either toner remains on the paper or the paper doesn't lift at all. I can't believe the paper is so finicky that literally an extra second here-or-there can mean the difference between a succesful print or a failed print - surely I must be doing something wrong? I'm using a Phaser 7800 laser printer and a HPC480 press, pressing for 20 seconds and letting it sit for about 5-10 seconds before peeling. Where do I go from here to troubleshoot?

[@funkblack]

Can you reuse the paper that had the print on?

[@Ask.ifasogo]

How long do I wait for the shirt to cool down before I peel the paper backing off? 15 sec?

[@AWSpecialtyPapers]

Thanks for the question! We recommend waiting 3-4 seconds before peeling.

[@Ask.ifasogo]

@@AWSpecialtyPapers in the two videos of yours that I watched, you let them cool down for 18-20 sec. I'm just trying to get it right because I am having to rub the design onto the garment before peeling it to ensure that the design is transferred as clean as possible. It's quite annoying. 😂

[@kenparsons1396]

Hi what temperature?

[@felipeaboul1441]

can I use any laser printer?

[@luismontalvo5813]

Hi ...May I use the transfer Rip with a normal Laser printer ?

[@jbsness5375]

Thank you for your videos. In the second step, after the 30 second high pressure, when I remove the parchment paper some ink stays on, do you know why?

[@AWSpecialtyPapers]

Hi! If toner is sticking to your parchment paper then you are using the wrong kind! I do a lot of testing of parchment sheets and know very well that many kinds DO NOT WORK! We sell a couple of brands that we have carefully tested and support! This includes the Forever brand of Anti-Stick Matte and Anti-Stick Glossy available in tabloid size. We have a new product "SPTWXL Silicone Sheet" which is a double sided silicone sheet with a nice tight weave that is available in sizes up to an 18 x 22. This new product was developed with the IC Split product in mind, where users can split designs across multiple print sheets and reassemble them on the heat press. This sheet has a very good release and the large size completely covers the heat press to ensure there are no edge marks with very large designs.

[@jbsness5375]

Thank you for your answer, well did not know that parchment sheets have an importance, and that's true I bought a cheap one (for cooking ;-) otherwise, it seems that my garment (white and 100% coton) become a little bit yellow, do I need to cover it all with the parchment paper or do/use something else ?

[@paulkeating1774]

What is this program you are using? You are going over the program without naming it.

[@fred9857]

So I can do No cut transfer technique with my general CMYK Laser Printer, can't I ? What is the name of media should I use for this technique ?

[@AWSpecialtyPapers]

Yes, Forever's Laser Transparent or Forever's Laser Dark (No-Cut) media.

[@sammilby2735]

Can transfer it to dark shirt?

[@stevenkl.8434]

You can print on dark garments Sam, but without white color, if you do not have a white toner printer cmyw. You will need the FOREVER LASER DARK No-Cut CMYK media kzbin.info/www/bejne/ZqG0f3SQht6ne7M

[@anamarisca]

Hi 👋 thanks for the video, very helpful! 🙏 what TShirts do you used for the video? They seem so nice and soft!

[@carlosalbertolinares1242]

So, what is the exactly time to remove the paper from the T-shirt?

[@AWSpecialtyPapers]

Yes good question! As a general rule it seems to be about 10 seconds, but this is not an exact value. Too soon and the toner sticks to the paper - too long and the paper sticks to the shirt!

[@carlosalbertolinares1242]

AW Specialty Papers thank you.

[@shashiabeysekara1829]

plzzz transfer paper name?

[@AWSpecialtyPapers]

Forever Laser Transparent

[@AWSpecialtyPapers]

Yes this works with most any laser printer

[@JeanLambert76]

What about oki c 831 n?

[@twebb32]

Thank you