FORGESTAR WHEELS - Installing Center Caps

[@OnlinecarshowNet1]

I apologize... very end of video screwed up in rendering. I decided to just trim using KZbins Editor but in turn it can take a couple hours. I hope this help anyone searching the internet for how to get them on.

[@schafer240]

I was struggling as well, thanks for the tip. I found foaming window cleaner to work like butter barely a tap and it slid right in

[@XDgamer-lk8nf]

Thanks it work love the zr1 I got a c6 extra wide fenders beautiful car bro 😎 went with the f14s also and these caps are tuff without damaging them

[@ronknowles5302]

Yeah just did mine on my mustang. They went in but the facing of the caps is peeling off now!!..terrible cap!!!

[@OnlinecarshowNet1]

Yeah I found a sales rep on Instagram that finally got me replacement caps mine were horrible. I'm curious if I could get really strong glue or waterweld and fix the old caps for a spare set

[@alfadriver87]

Lol with the mallet. I’ve installed them with my hands with a very light layer of Vaseline or grease on the seal and the wall of the centercap housing.

[@jsomething2]

you caps are going to go missing using any time of oil. mine did.

[@OldManPhillips]

Hilarious video, and thanks very much! Hoping to one day get some Forgestars, so maybe this video will come in handy! Subbed!

[@OnlinecarshowNet1]

Thank you. If you end up going up a tire size to fit drag radials go 265 on front. I have a very slight rub I had to adjust lowering bolts. 265 width would have zero issues

[@OnlinecarshowNet1]

And thank you 🙏

[@johncunningham7612]

Also did you need centric centres to fit your hub even stud holes are big.

[@johncunningham7612]

My problem is how do you take them out need to balance ?

[@alfadriver87]

You take the wheel off and push them out easily from the back

[@jsomething2]

forgestar wheels are nice.. the customer service is ridiculous. they will not tell you the size of the o ring. act like they don't know and it took over a month for them to send me the center caps I ordered at 25$ each. anyone seeing this I would recommend a different wheel if for nothing besides the horrible center cap design. I've lost 2 from trying to using a silicone based lube to get them in and one I replaced the o ring with one I had, because as this video said. any time you take the cap off the oring will be dead. on that one the o ring was a bit tight and on a track day the heat softened the cap and the ring deformed it. buy a less frustrating wheel. brand lol

[@morganlingsweiler9813]

Yea I'm trying to figure out a replacement with the Audi ring logo. Glad I read this before I took them off. I'll look for a vinyl sticker to cover them I guess.

[@jsomething2]

@@morganlingsweiler9813 probably for the best. just cover it on vinyl so you can change it easily. I did find the correct o ring size of you need new ones.

[@robeason9594]

Having the same problem and just received a new cap to replace one that broke during installation