Forging a NINJA SWORD out of Rusted Bearing

Thank you for watching.
I hope you like my work and the video.
#forging
#sword
#ninja
#turning

[@nikoalic.o.dgamer9862]

Sure is cool to forge your own sword

[@saidmateomartinezrioscooki2618]

local police: wait is that legal? Texas police: yes

[@Фах-р7и]

Меч это нечто большее чем выровненый и обточенный подшипник. Его вообще не ковали. Таким вот только и рубить бутылки да гипсокартон, потому что от такой закалки без отжига он хрупкий. Меч должен рубить железо, я так свои клинки проверяю

[@hoovyonlifesupport1129]

@@Фах-р7и no one can read that and i dont think anyone cares

[@danielbarker4127]

Hay you play Mobil if so can we play I’m Realy good

[@tjay2586]

@@hoovyonlifesupport1129 that’s why there’s a translation button are you blind?

[@letmeengineeru2770]

That sword could be so heavy to wield due to its thickness and that handle is uncomfortable when the sword hit a harder object. Nice looking blade though. Overall, it will KEAL!

[@KrispyBizcut]

I'll have to admit, that is one hell of a job brother!! I want to try to make my own bowie knife sometime in the near future. But again, amazing job bro!!!

[@giamphyer8276]

mamañema

[@錆寂]

ベアリングは刃物にも使える高炭素鋼が使われていることが多いらしいので、実用的でかっこいいこの作品は素晴らしい。

[@TheMagaiver40]

Belo trabalho, um abraço do Brasil 🇧🇷

[@LucasFerreira-of6ti]

Um país abraço o cara?

[@Devil_Domination]

Brasil... Where it will be used for its intended purpose 💀

[@gabrielbecker8031]

Mano não sei se você vai ver esse comentário mas que trabalho bonito esse seu 👏👏🇧🇷

[@Facetiously.Esoteric]

I may be wrong but didn't look hot enough to be tempered correctly. You might want to buy tempering files. They will tell you what level by scraping the metal

[@vibingflakey8730]

True it should be over 1.5k

[@FrankBallmann]

Agree with you

[@JENDELALENSAKAMI]

Good steel

[@reesemoore5703]

Your right

[@DevilsBrigade94]

The steel he used is extremely hard as is. Doesn’t need to be as hot as other steels to achieve the same harness and this thing will still probably shatter if it was actually getting used.

[@jacksin3323]

I gotta admit... as a knifemaker, i was ready to call bullshit based on the thumbnail. This surprised me. Dedicated work. Especially difficult on 52100 and esp a thick-walled race. By hand. With a 5lb sledge. With minimal, underpowered tools. Props. 👊 If youre still pursuing the craft, lmk. I may be able to gift some materials or supplies. I still make knives, but only really rare occasions that i get odd custom design requests or do a small series run.

[@messermanufaktur-knifeart]

Its ridiculous! Heattreating is bad. Surface grinding also. This piece must be heavy an useless. But i also say its sexy! He has to improve the skils an make more.

[@deezznutss6657]

@@messermanufaktur-knifeart What is he gonna use it on

[@gameplaygaminggamerofgames2959]

@@deezznutss6657it’s for the zombie apocalypse, duh

[@sasun4-ef3ew]

Can you please recommend what steel to use when you are making a bushcraft knife?

[@billyfoster3223]

Very nice sword! Great work!😁👍⚒️🛠️

[@ezpaidy502]

No sé por que YT me recomienda estos videos pero lo agradezco, esa espada quedó GENIAL!

[@ElmisaelR2]

Comentario en español 😮

[@Jacobite172]

¡Es tu señal para convertirte en un gran herrero!

[@xr2699]

looks like MGS4 Raiden's sword, great job!

[@dvatoporainocsh]

Круто. Не ожидал, что такое можно из ШХ15 сделать, обычно рессору берут она же 65Г.

[@T90m333]

Где-то тут наебалово есть в начале была обычная обойма подшипника но как она легко включилась меня очень это удивило Я до жёлтого цвета нагревал и з******* кувалдой бить отключилась она медленно плюс что интересно её хоть закаляй хоть не закаляй она всё равно твёрдая сверло её не берёт просверлить а он её легко просверлил что-то блять тут как-то нечисто дело вот я не могу поверить б**** в начале было обойма А дальше Мне кажется какая-то просто железка н****

[@斧ノ井妹紅]

最高にcoolなNINJA SWORDだ！製作者さんのpassionが感じられるよ。この剣は製作者さんの魂が込められた一振りだね。

[@عبداللهمحمد-ع1و8ر]

استغفرالله

[@camrik617]

Привет!Все писали и я напишу,если это твоя первая работа то сайдет.После её изготовления ты поймеш все свои недочеты и нехватку опыта,а если это просто для показухи для дурака то отличный мечь... Мечь сам по себе оружие специфическое и для определённых целей.Структура ,виды мечей ,есть разные мечи напримере твоего меча ниндзи .У ниндзи мечь тонкий и лехкий для одного смертельного удара по незащещонному броней телу противника,как нож повара,если противник в броне ниндзя убежит .А твой как двуручник по весу и остроте "не разрежу так пришибу" железяка в стать.Сори за стёб если будеш продолжать то удачи история мечей очень огромная,и каждый вид меча для разных целей...Удачи...

[@loganrosomaha2102]

Что это было?

[@ЮрийГеннадьевич-ъ8ц]

Ты че даипался

[@dc-comunic]

A work of art... congratulations!!

[@nickhendricks308]

Beautifully done 👍

[@kiqvalle6908]

Nice manual hydraulic press, goodjob

[@МитрийМосквин]

Хорошо вышло. Я б рукоять толще сделал и гарду. Хотя и так сечёт нормально))

[@salmanpradita4969]

Luar biasa aku salut sama bapak ini, samurainya keren

[@mahinderkumar3339]

Superb work and awesome blade bro 👍👍👍👍

[@HAWAII-uh7sc]

Magnificent effort you sure got it down Practice makes perfect Aloha brother....

[@bradleyj.fortner2203]

I'm not a sword snob. I can't tell you what makes a sword a "good" sword. But, yours looks cool and it's sharp. In my opinion, that makes it a good sword. Nice job.

[@arshiaa001]

To make a good sword, you need at least two types of steel with different amounts of carbon in them, one for the spine and one for the edge, otherwise, you have a brittle sword. You also need it to be solid and without cool-looking holes, which make the sword even more brittle. And you need it to be sharp enough that it cuts through flesh and bones, not just water bottles. A sharp katana cuts through many pieces of bamboo in one masterful swing. All in all, this is in no way a good sword, but it is a cool-looking toy.

[@ВанбродскиРеБтил]

You don't need to be sword expert to understand this is junk...

[@bradleyj.fortner2203]

@@ВанбродскиРеБтил It's only junk if it fails in battle. I highly doubt it will ever see battle. It will most likely be used for decoration.

[@lileke238]

I know nothing about making good weapons, but there is a problem with the all videos like these - after forging, people don't test the weapons for durability. And we know why - because tests targets to finding the point when the weapon breaks. It would be the best way to proove the quality, but it will make the videos strange - "today i'll make a sword to break it"

[@Wortigon2000]

Too bad about the holes on the blade being misaligned. (Not the same size/not in a straight line) other than that, it's a masterpiece.

[@dice8372]

It's not a masterpiece if it has flaws 😅

[@jaenalginanjar7517]

Rancaekek hadir 🔨🔨🔨

[@bonginkosimnisi6632]

Simply put it's beautiful 😍

[@hmooblubneej2075]

Hello thank you boa tarde ok nyob zoo os tij aw kuv cuam saib koj law os tij 🎉🎉🎉🎉❤❤❤

[@jeydomo]

I'm not a blacksmith, I do really like how this came out. Only gripe is the handle being full metal with some light wrapping. A softer wood handle would feel better.

[@blackmage665]

its mall ninja trash, not something to be taken seriously as an example of a sword.

[@TheRealMRJ01]

Looks like something deadpool would use

[@alexandreferreira9888]

Meus parabéns ficou chow que espada essa meu amigo

[@jshua9708]

Galing . Mas maangas sana kung resin ang ginamit sa may handle

[@carlmcgee1623]

Looks like someone got a little SICK. Great work !!!!!!!!!

[@TrentDan]

L4D2 Coach:Got me a ninja sword!

[@dustinnelson1295]

Idk why so many of comments are negative. Its just a decorative piece. Yall act like he's making a documentary on how true swords are made for battle or something lmao. He made this for the entertainment of youtube. The only battle this sword will ever see in its life is dealing with the mean comments from key board professionals 😂😂

[@marcospinto2290]

That is one of Best job I have see..GREAT and Professional job..congrats..note 10

[@barrywhite6060]

I've always wanted a samurai sword, but I want one that's made in Japan the traditional way. They're incredibly expensive so it's not likely it will ever happen.😂

[@judsonross6995]

There's a guy in Oregon that was trained by the masters in Japan. The only powered item in his shop is the overhead light. He does all his smithing in the traditional ways. $10,000... 6 months and you to can own a 'real' samurai sword. His name is Michael Bell. Compare that to $100,000 and 2.5 years...

[@edim108]

Shame you didn't do a differential heat treatment. Bearings are usually made out of high carbon and chromium steel, which means you can make it very hard. Hard blades hold edge better, staying sharp for much longer, but are more brittle and prone to damage than softer steel. Which is why some blades- most notably Katanas- are differentially hardened. You get blade with exceptionally hard edge and much softer spine- traditional Katanas go even a step further and are made out of multiple different kinds of steel (high carbon edge, medium carbon sides, low carbon or even straight up iron core)- which prevents potential cracks from spreading and damaging the whole blade or even breaking it in half in most extreme cases. You get the benefit of extremely hard edge without having to worry about the whole blade breaking.

[@riverwillis5774]

Dam that’s a lotta info

[@leahhailstones2457]

Wow👀I watched a video of a guy making a mosaic sword......I'm still not 100 % sure how he did it I always knew forging was a skill..but the more I look into it the more complex it seams to be Really super cool

[@raptorballs1546]

This guy Katanas ⚔️

[@razvanburada1648]

Nice 👍

[@omennoir8850]

This is an amazing work of art ❤

[@jondrak2219]

Gotta love how so many kids try to pass off machining as smithing!

[@edwinoutlaw1706]

Yep. I was told long ago " You are either a good WELDER....or a food GRINDER ".

[@overd2ive-g464]

I always watch a content like this when I wanna sleep xD Works pretty well tho

[@LittleScribblerCat]

(robbers) “ give me all your money” (These types of KZbinrs) “ITS SHOW TIIIIME”

[@sisi_pusi]

pretty cool sword 👍

[@crimson3274]

You are a newbie to smithing? It was almost painful to watch the work with the hammer. The tempering was straight up not hot enough, most of the work done with a grinder, sanding done as if you did not care for the outcome. Even the hples were off a lot... im suprised you did not drop the hit yourself when hammering. You should straighten the metal between two metal poles or something similar else you risk the iron bouncing on the anvil when you smack it from top. If you want to smack it like that put the ring through the horn and hammer it on the flat part of the horn or the anvil itself to open the ring easier. And make a better furnance this one does not keep the heat. As for the handle never use just skin. The wood reduces vibrations as noot to break your fingers when yoou hit something hard. This sword has a big chance to hurt you. And do full passes when sharpening the damn thing. Also dont swing it like that or you are going to hit own leg in future. Or worse.

[@punk_oi_oi]

Nice

[@MARKETCLUBEXPRESS]

HERMANO, UN EXCELENTE TRABAJO, TE FELICITO. tengo una duda, ¿la hoja ya no se oxida? o sea la corrosión no le afecta?

[@tynitious8631]

It would be awesome if you did a data mosh at the end where you go to pick up the bearing and I turns into a sword😁

[@Shadowband72]

Almost looks like something a mandalorian would use , just made out of a bearing instead of Beskar 👍

[@laraflatron5874]

THAT'S real asmr!

[@michakuwaek7271]

Awesome!!!!!!

[@andiajalah9147]

Nice. Lain kali harus safety firs ya

[@axelmaximiliano5207]

Loco me encanta como haces las katanas tenes un estilo muy único, cuanto vale una como esa ?

[@크림파스타먹고가]

무겁고 튼튼한데... 일대 일 싸움이라면 좋지만,전쟁터라면 너무 힘둘겠다.

[@kaidatboy]

Great work

[@Randomboii4897]

I wonder if you need a license for doing stuff like this..

[@billyfannin1154]

And its gotta be made battle ready weight 30 pounds swing amazing power amazing if any black smith can make this I bet 2000nds people would want to buy it especially if it comes out original and super bad ass and very very sharp

[@InshadAli-y6q]

Sir, we have lost this sword, can you send it to us?

[@gabrielarruda4083]

Is it just me, or does this blade look like Sundowner's blade from MGR.

[@BL3achL0ver]

I thought it looked like raidens

[@BeatsbyLegend]

Man, I gotta say, your forging process is clean! 10/10! But why no hilt design but just the wrap, or even a scabbard for such a futuristic sword?🤔 Still an amazing job, though. Blacksmiths have their reasons, I guess. Great forge!

[@Shadowband72]

You only really need a hilt on a stabby weapon , to protect your hand from sliding forward onto the blade . And maybe block a little bit of the other person's sword from hitting your hand .

[@ВилийЛузанов]

Такой коментарий может написать только профан в кузнечном деле ,на видео все плохо и все неправильно

[@aeaerr9995]

(ตัวตน.=เงา.)=ขั้วบวก.(หัว.)=ขั้วลบ.(ตัว.)=ตัวเก็บประจุ.(7.)(7.)

[@cf2scarecrow]

That looks better than the ones I have

[@ranjeetmogare2863]

Nice ninja

[@widyapratomoedp]

You have to do a bamboo cutting test to determine the strength of a sword. a bad sword will usually break.

[@austinkoontz5466]

Awesome.

[@CalvinMastermind]

masterwork

[@xanderstover8944]

You have inspired me to make something similar

[@pierreb366]

Bravo mec

[@Top_CRAFT]

Good one

[@kevkoun-viewer]

Good job 👍

[@gersonmel]

Muito bom

[@davidensinger4175]

This is not a sword but a toy, the Sword Masters in Japan will surely laugh at this flourish. But it's probably a good video for some casuals.

[@felipechalfun-design4807]

Living on a higher tier than these "casuals" I suppose, right Mr. Sword Encyclopedia? Useful or not, this sword is a work of art, a lot of effort was put into it, and you, superior to anyone else but the "masters", pulls of a dickhead comment like this, great example of lack of respect and consideration. Nobody begins as a master, sure BL will high up his skills as time goes by. @BL Restoration, you're doing a good job! Keep it up, pal.

[@tengentoppagurrenlmao5907]

Respectfully, if it's looks like an overly oversized knife with a potential to inflict a cut damage, then it's a sword. Just like me old rusty gardening machete.

[@tomask7291]

True,it is not easy to grant

[@oqut]

i wish i owned some like that

[@凶暴な猫ニャーオ-p7d]

嗚呼！美しい！素敵過ぎます！ 私の好みが良く分かってるねぇ！いくら払えば買えるんだよ？

[@BarbadosPesca23]

O mano está preparado pra algum Apocalipse zumbi 😮

[@peterderugin3818]

я, как совершенно не специалист, из недостатков увидел только отличие повторяющихся деталей (отверстий и зубцов) и небольшая неровность ребра скоса по клинку. А так шикарная работа.

[@johnconstantine2926]

Или заточка односторонняя,как на ножах для сашими. Чтобы лезвие было тонким.чем тоньше,тем острее.если так,то и неправильный баланс углерода.чуваку просто нехер делать

[@СергейМухачев-г4и]

@@johnconstantine2926 а ещё рукоять на которую положили болт как при украшений, так и просто создание одекватного овала рукояти без острых краëв с двух сторон

[@ВиталийРадзиховский-з6у]

Holes in the blade are not needed; they only weaken the blade.

[@lorransilva5673]

Sei lá. Achei que faltou uma curva. Mas msm assim ficou ótima.

[@gustavofabiani9121]

Bro just imagine the arsenal of weapons this guy have at home

[@KanazawaRei2009]

これは刀というよりはマチェットですね

[@ГеннадийИванович-р6х]

После того когда сделал повесить на стену и больше от туда не снимать ! Сталь шх 15 сама по себе рез держит но она хрупковатая то то ещё не чё а вот оте отверстия на спинке клинка превратили его в сувенир ! Приговор тока стенка ! Я вообще то кузнец и понимаю толк в клинках ! Просто игрушка ...😂

[@Deathrain-j4d]

Видео из разряда "я у мамы кузнец-нинзя"

[@zhollings]

Dude is just molly woppin those bottles 😂😂

[@royal444yt5]

You should also try it out we want to see how smooth it can cut . By the way your swords are amazing 🖤

[@SOLOMEN66]

nice one centimeter

[@charlesbaylis8650]

That's a sword I would use in a zombie apocalypse

[@behcil1243]

good job

[@marksoriano0702]

nice

[@Vitaliy.Fomenko]

Красота))))

[@colebarton3726]

I wish I had 2 of those swords.

[@папакот-в5м]

На наковальне цепь зачотная.

[@edgewatersbestguitarist1524]

Very great work!

[@lovezduxa]

Самурайский меч эту " мачету " пополам сломает , как фильме Убить Билла.

[@ЮрийМирошников-з3л]

самурайский меч поломается об этот, катана не предназначена устраивать зарубы на мечах, она хрупкая, ее основная задача рубить тело, максимум 2 удара по мясу с костями, а не по этой тяжелой хрени из подшипниковой стали

[@allansneddon5442]

impressive

[@Wahyusaputra666-d7d]

woww good job🥰

[@발업저글링]

칼자루가 에바네

[@Comentario_aleatorio.]

Só tem gringo aqui em fim deve ter dado muito trabalho parabéns

[@rockman_zeta]

"My sword is a tool of justice!"

[@marcosdegoes424]

cara que linda espada eu queria uma dessa e bem afiada

[@matthewmares3681]

What he’s actually making is something called a ninjaku, a ninjaku is just like a katana except instead of curved it’s straight (\_/) (•.•) (-👍

[@_S_V_A_T_]

Лучше конечно его сделать чуть изогнутым как катану и поставить гарду

[@kaushihatake4106]

Belo trabalhor bem legal Eu queria saber se você vende é espada