Forging the ultimate axe head with Conrad Blacksmithing.

[@johndunbar2393]

"Why do these axes cost so much?" Well, this is why. I watched one of his videos and had no idea he was as young as he is. This young man's future is bright, very bright. Nice work Jonah, and thanks for bringing us along Gordy.

[@j.d.williams6882]

Well said sir!

[@bearwoodcraft3591]

How old is he?

[@johndunbar2393]

18 or 19.

[@Carboneye7]

Creativity like this trancends lifetimes. He is simply picking up where he left off last time. We all are..

[@conrad.blacksmithing]

Good times buddy. It was a blast having you at the shop!

[@westcoastsaw1368]

Yes it was!

[@daryn_Canada_1066]

Conrad, you are a true Craftsman. Excellent work! Very few people take the care to provide such a high quality product. I'm sure Gordy will appreciate that axe forever. Thanks for taking us along!

[@batmantiss]

Good for you Gordy, it's about time someone built something custom for YOU for a change

[@randyballew8795]

That Gentleman is a Master at his craft.

[@fern6114]

Not a master, but nearbuy … he is on the way to

[@hazelpup]

Wow! Almost to nice to use. Always a pleasure to watch a craftsman with that much talent

[@richardflagg3084]

That's a hell of a lot of work. Thanks for sharing the process. Beautiful axe that will last a lifetime or two.

[@ethicalaxe]

Oh man I had never thought about a wedge banger with a thinner poll to get to a wedge thats buried deep! This young man does great work. There's a reason why axes made like they used to be are expensive. I only make handles and lumber for them and I have a great appreciation for the entire process.

[@OkanganMadViking250]

dam, his forging skills and knowledge are amazing because the final result, aka the axe, is just diamondmite

[@kevinjones2667]

Gordy my friend. That's one hell of a wedge banger. ❤ from pnw oregon

[@timooten5333]

Awesome content! True Craftsmanship!

[@justinkipp6830]

Hand crafted anything is so interesting

[@davetylutki]

alot of work right there very nice

[@eclipsearchery9387]

You just made my day with this video :) What an absolute beauty of an wedge banger axe! That is an heirloom treasure :) Thanks for taking the effort to film.

[@oakfarmfirewood]

Great video 👌🏽

[@johnnyshell2839]

Ok. That's a sexy axe. I really wish I had taken my tree work life longer. I would have been able to hang with these guys. Great video brother. Gordy. I really love watching you. Get tube salad on board with logging and felling. He's an animal climbing. But had the ability to be a great all-around tree man

[@tlars36]

Gordy, "hairy sasquatch arms", good lord that is funny! I wish I could be the very proud owner of one of his works of art! This young man is a true artist and artists like this should be cherished and good to see him wearing proper P.P.E.! Thank you guys for sharing this with all of us.

[@marioep18]

Thank you guys for this awesome videos, here in Colombia (south America) is really hard to find an axe like that, even more hard is to find a guy with such talent. Keep doing this kind of content!!!

[@shaneclark207]

Great final touches with the makers mark and personalized stamping. One of a kind. 👊🏼👍🏼🤙🏼

[@mtbrewfalling9442]

That’s a beauty looking axe. Don’t lose that one in the bush😂

[@westcoastsaw1368]

I know that would be my worst nightmare

[@hjvilhelmsen8848]

So Nice a video Gordy. Im Big fan of you🤟🏻🛠 best regards Henrik. Denmark🇩🇰

[@michaellee9883]

Impressive.

[@Piledriver2235]

Great looking axe!

[@justinweaver8107]

Very nice axe gordy conrad builds an amazing axe!

[@michaeljheinz3336]

Wow that's outstanding Gordy, Great craftsmanship.

[@ToddAdams1234]

Gordy, may YOU have many good years of use and wedge banging from your BRAND NEW AXE that was custom made, and just like the “shake n bake” commercial, you helped. 😊

[@predator_or_prey]

Beautiful....

[@michaelwhiteoldtimer7648]

Great job Jonah and thank you Gordy for the video

[@markroper9269]

He has nice suspenders!! Cool looking axe!! Love the blacksmithing! That is an heirloom to pass down!...for sure!! I have no need for an axe.....but I want one!!! He hits more wedges on the first swing than you and Jacob combined!! 😝 Have a great week guys!!

[@markp.9707]

Great video!!! Loved it and would love to see more. Carol even loved it.

[@theguyguy3528]

Man that was cool

[@pegleg1972]

enjoyed the build process. thanks for bringing us along 👊

[@unemployedlogger]

Beautiful wedge banger! Nice work!

[@Brian-Mondeau37]

Great work Jonah! Awesome video, love seeing this kind of stuff still happening these days where everything is mass produced garbage, real craftsmen still exist out there. Beautiful piece

[@danielsmith8659]

Might be the best video I’ve watched from Yal

[@marko1025]

Bloody brilliant video men ! Beautiful work Conrad . Craftsman all the way buddy . 👍🏻🇦🇺

[@thomaslindroos1667]

Friggin awesome

[@cantwellron11]

Love it good blacksmith good job FELLAS = SOUTH AUSTRALIA

[@ColonialEricSR]

Wow that was an awesome video that ax head came out sweet dude is very talented 👍

[@geofgladman440]

Great video.

[@dannywhelchel4801]

Thats a work of art,love that axe I hope you get years and years of good use from it,he does awsome work.

[@sporranheid]

How many beards did he lose learning how to do that? 😂 That is a thing of beauty! Fascinating and entertaining vid 👍

[@tome.joyner887]

You know of course brother Jonah if Gordy wants to watch that doubles the price. If he wants to help that is triple!! You build a beautiful axe young man!

[@jasonmichaeljimenez]

That was a great video, I really enjoyed it. Sweet looking axe. Gordy and Jonah should roll into the JK Boots podcast, I would love to hear more stories.

[@johnnyshell2839]

S7 tool steel. Really great hardening and sharpening ability steel. That's top notch. As long as the heat treat is good with no cracks or deformation that's a head that will last for years. Not like a 1095 that's almost indestructible when treated. Becomes brittle in large billets

[@roguearts1382]

Incredible video, reminds me of my father shoeing horses, thanks for sharing.

[@Houseworksaws]

Incredible piece man.. should be damn proud to own that

[@simjai1000]

Wow! This is incredible to watch, thank you both for taking the time to make this video. Unbelievable workmanship & the axe looks awesome ❤️

[@westcoastsaw1368]

Glad you enjoyed it!

[@simjai1000]

Thanks Gordy! Recently watched Jeff Schroeder’s axe collection videos, please do one or a couple as well! Been trying to haft some axe, splitter and hammer handles and curious about the types of wood to use for the wedges, soft or hard wood for the different uses but in Australia so the varieties are different but any advice to listen & learn from would be great. Thank you again 🤙

[@danr308]

Sweet!Thanks for making this Gordy. Good stuff Jonah! I just forged a knife (more like a shank) from rebar using a hair dryer and a hole in the ground... I am hooked.

[@appoutfeed]

That was great!

[@iskato914six]

beautiful craftmanship Jonah! for Christmas, ask for a new ruler :)

[@sizemoretreeworks]

Awesome

[@wednesdar452]

Gorgeous!!

[@MartyGramRC]

Sup Gordy - nice hat! Love the videos. 😎

[@westcoastsaw1368]

Hey, thanks!

[@Firewoodmaninvirgina]

That is a awesome axe 🪓. Well done

[@sunbear1973]

Awesome looking axe and true craftsmanship went into this forging. 👍👍

[@AnomadAlaska]

Axe content and shop stuff is interesting content to me. How to do stuff and how stuff is made information. If you just want to watch screaming chainsaws and falling trees there are plenty of channels for that. Learning something in an enjoyable video is what I like. Since you put my initials on that axe I'll send you my shipping address. And a pre-paid shipping label for going to all that trouble you went to for me - LOL.

[@cameronb76]

Very very nice. National pattern is my fav. I'd like to see his method of sharpening and polishing.

[@papaduck2443]

Man Gordy, this video was awesome!! You produce excellent content on your channel and for that reason your channel has become one of my all-time favorites! Keep up the great work and God bless! Cant wait for your next video!

[@westcoastsaw1368]

I appreciate that! Thank you

[@woos31]

That's badass! Such a cool build with a cool dude, thanks for sharing the process Gordy

[@westcoastsaw1368]

Glad you liked it!

[@dgoodman1484]

I’ve seen a bunch of axes being made the last decade or so, but that’s pretty much the first one that is useful! You can split wood with just about anything but the last good new rafter I’ve seen for sale was the three 5lb GB STROAX’s I bought about 45 years ago. Two are lost in the Sierras somewhere but luckily I still have one left! Awesome! 👍🏼👍🏼

[@br-dj2ti]

Amazing video that Man is amazing at what he does. God bless stay safe guys. I would love to have a handmade one one day like that. I guess they all are handmade but you know what I mean God bless.

[@sebastienloyer9471]

Amazing work.

[@andyprice4696]

Hell of a talented guy. A real craftsman

[@SmithFarmTilton]

Hand crafted awesomeness !

[@ishure8849]

G'day Gordy, that looks like a nice wedge banger you've got there. I'm glad to see Jonah wearing his ear protection an old mate of mine has hammered out over nine thousand axes and he has trouble hearing me on the phone these days 👍.

[@HairlipButcher]

What talent! Freakin sweet fellers!

[@Monkeysic]

Awesome video! Does some good work and you got a 1 of a kind axe!

[@stihlfansuisse]

Magnifique vidéo, j'adore votre travail, bravo !! 👏👏👏

[@alittleofthisandalittleofthat]

Wow what a craftsman. Very nice axe. I wouldn’t use it. Hang on the wall and love on it. 👍

[@Matt-wf9vc]

Beautiful!

[@artillerest43rdva7]

just amazing your skills at creating an ax are outstanding! as great and perfect as the last one! I would like to own one, but I do not do much tree work! so it would not be properly used as intended! great job, keep up the great skills to create art and axes all on one handle!

[@jeffschroeder9089]

Deadly

[@clrd4tkoff]

WOW!! What an Absolutely amazing video!! That was so cool to watch that come together!! Beautiful Axe!! Definitely an amazing Craftsman! 👍🏻👍🏻

[@marceldiseraad9977]

Very cool to see so many craftsmanship! Wish I could have an axe like this. Greetings from the Netherlands

[@comingtofull-ageinchrist6736]

What an awesome axe! Will you do an axe for anyone requesting one? I’d like to get one similar to this one! Great work!

[@WildAcresFarms]

He does them, but they ain’t cheap. Nor should they be. Someday, I’ll spring for one.

[@comingtofull-ageinchrist6736]

@@WildAcresFarms didn’t expect for it to be!

[@shawnloftin]

Man that is super nice.

[@timcarroll6952]

I'd totally buy that axe head and your handle. When's it goin on the website? lol great work!

[@charles17508]

Wow just wow 👌🏻

[@mississippijohn1432]

Awesome axe man. Hope it swings well.

[@Regrantho]

Piękna siekiera! Kondrat, znasz się na kowalstwie, ukłony w Twoją stronę!

[@blkrdr59]

Wowwwww!!!

[@oldschoolmoto]

Glad i ran across his channel on one of your other vids realy nice work and i subbed his channel

[@charles17508]

So sick

[@br-dj2ti]

Is there a way to get a hold of this guy to make people axes like this or no god bless

[@mariushegli]

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

[@203_climber]

that was fucking awesome

[@jasonscottsgreatoutdoors429]

Glad to see someone else names contacts in there phone like I do 😂😂

[@yenerm114]

Hey Gordy on a raker gauge if using full house you put it up to the back of the tooth in front of the raker ur checking?? Or is that wrong? And what about skip tooth chain? No one ever shows skip jw if that’s rite/wrong? Or do you just set the raker in the slit, n it doesn’t matter where the raker gauge lands ??And will the bark box bolt on a 372xp?

[@westcoastsaw1368]

Yep set it right to the back of the tooth in front of the raker you are doing on full comp on skip it will set on the chain 👍

[@yenerm114]

@@westcoastsaw1368 thanks brother 🤘

[@treeassassin508]

What's the price for one just like this axe?

[@avianfish8732]

Dig the pioneer beards!

[@teamflashtv]

Nice apostrophe. You've published some killer videos this year.

[@westcoastsaw1368]

Thank you I am trying to mix it up 👍

[@ronsilva516]

That was coo to see done 👍👍👍😎

[@johnerwin3004]

Whats a ax like that cost?

[@MartyGramRC]

17:58 lol

[@westcoastsaw1368]

😆

[@chromesurf9]

Can we order these from Jonah? What does he charge out for one of these beauties?

[@forgodssakehuskers6261]

No way that's ever getting banged into a wedge. That's a mirror finish on that side. Maybe some chopping to calm the mob, but for a work axe, it's too damn nice to pound wedges.

[@westcoastsaw1368]

It’s going to work

[@pleinairbarnettoutdoors]

All that in one day?!!

[@Maniacalchopshop]

Compound turbo forge lol

[@snakeclips]

Make sure you look at the lens on the camera not the screen