Forscan 101 what is it how to begin where to buy how to start tutorial basics

[@brianhendricks5326]

Best quality basic forscan tutorial. Thank you. Im a retired technician. Vehicles i can fix. Computers and women are still a mystery to me 😆

[@rmiller2975]

At Last! Someone that starts from the ACTUAL beginning of the process! Well Done!

[@ricardosworkshop]

Thanks for watching Miller!

[@phillipgolden8701]

Fuck forscan I'm fuckinpossible.

[@ApolloVIIIYouAreGoForTLI]

For anyone yet to buy their scan tool its highly reconnmended you get the OBDLink EX.. Its made with the input of the FORScan Dev & has no switch (Uses a relay to switch electronically)... Certain features won't work with the manual HS/MS switch.

[@mistamastamind]

Thank you. I just ordered the EX because of your comment.

[@michaeldayton8934]

Thank you for explaining this in such step-by-step detail. I just started with Forscan and you are the first person I've found who has made a video on how to backup your system with such detail that it's like you're teaching the first day of kindergarten, because that's what we newbies are, Forscan kindergarteners, and this is the kind of detail we need to make sure we back up our data without screwing up a $60K+ truck. Thank you! (Subscribed)

[@thatguyc5899]

Thank you. Me and the electrons had a falling out years ago and we really don’t speak cordially anymore. This has bridged the gap allowing us to at least discuss the future of the truck again.

[@Relic67]

I just used Forscan for the first time successfully with much help from watching your videos. Thank you very much for making them. People like you make KZbin Awesome.

[@ricardosworkshop]

Thanks for watching Evans!

[@genewiseman5554]

Ricardo - you have produced, by far, the best Forscan how-to I've read or seen. I have 2 suggestions for improvement that I struggled with: #1. Just go ahead and buy an extended license b/c it make things much easier. Forscan will email an account key that is required in order to get the list of modules including as-built. #2. When highlighting an as-built module to run and save to your file follow these steps for ease of operation: highlight the first module, click run at the bottom of the screen, once all cells show click save-all to save to your folder, then (this is important step left out I think) click the stop button at the bottom to stop the program, go to the top and click on Configuration which will take you back to the module you just highlighted and saved, move to the next as-built module and highlight it, and repeat the run, save-all, stop, configuration process until finished. I think this may take a simple edit to this great video. Thank you

[@ricardosworkshop]

Great comment! Thanks Gene!

[@j.w.8663]

Yes, the 'Stop' part was unintuitive as hell. It seems as if it's just doing something important forever.

[@rcinfla9017]

@@ricardosworkshop As built data is available on Ford website by entering VIN number and can be downloaded. I believe Forscan is connecting to this site to access the as built files shown on screen. You must have Wifi or direct internet connection on laptop to do this.

[@tomsdreamshopworx]

I was so nervous to do this but yours by far is the best video I watched on a step-by-step procedure I was able to get it all set up and save every module thank you so much for taking the time to do this.

[@jawdinker554]

Thank You Very Much for your time taken to create and upload the best FORScan tutorial for beginners I've come across. You've created it perfectly 👍 You're a TOPMAN.....

[@ricardosworkshop]

Thanks for watching Jaw!

[@TrickShiftGarage]

Awesome! I've watched other videos but they don't go through Forscan step by step. You did an awesome job man, great video. 👍

[@londonoalex]

Thanks so much bro. I got a Mazda 3 and bought all the stuff, but I was scared to mess up my car. Now I at least have a starting point.

[@daveprzygocki1486]

Thanks for helping newbies. I’ll be back after I get my license code

[@ufo-bro532]

From Australia thanks mate because I have a 1999 AU ford Falcon and I've been searching for a scanner that would support my car and the only one is Forscan and you helped me out big time with understanding it and explaining the procedure, once again mate thank you Ricardo

[@michaelostrofsky6289]

Outstanding video. Thanks. Plenty of information for me to do a couple of tweaks I've found on a Ford forum.

[@andyjprice7492]

Great video, a must watch for us newbies, you answered a lot of my start up questions, I'm going to go request access to the forum and order my OBD reader now!

[@ricardosworkshop]

Thanks for watching Andy!

[@shadyrest429]

Ricardo thank you very much for your great videos. I just bought a 2017 Lariat and i am doing almost everything in your bags of goodies. Love your passion on your Ford and i am the same way. Another thing that i like is that you actually reply to people asking questions. Subscribed and keep it up. Harald

[@ricardosworkshop]

Thanks for watching Harald!

[@sethmarcell1131]

oh i am SO excited to try this, just got my maverick and cant wait to see what we can do.

[@jack78_]

first time user here, when i first start the forscan i should proceed to AS Builts and save each one prior to messing around with forscan?

[@rawdawgcross]

Great vids Ricardo. I have a 2017 Ford F350 Lariat Ultimate with all the bells and whistles. I removed the bed installed a flatbed as I do a lot of cowboy work with gooseneck trailers. I don’t have any back up sensors or a tailgate camera and all of the alerts are going off informing me of the missing signals. My blinker lights flash normal but in the cab makes the rapid noise as if I have a bulb out. I just got the Forscan and tried deleting the DTC codes but they never go away. Any thoughts on how to go about correcting any of these issues?

[@ricardosworkshop]

Deletingvthe codes will only temporarily remove them. You have to adjust the block settings for each issue.

[@AB-wq2vy]

These kind of tutorial videos are always useful. Thank you for making this!

[@newfie-dean5803]

Will this give you the same diagnostic capability as what the techs at the Ford dealership have or are there limitations for you?

[@jquiznos2283]

Thanks brother. This video post was enough for me to sub. You made this precarious endeavor seem less treacherous. Lets see what I can change in my XLT. If only I could enable NAV....

[@OrigDJAnimate]

Excellent info, this is exactly what I needed to know to get started

[@skynet2115]

Thank you That was very helpful would you know on a 2020 F350 using Forscan how to go about doing a manual regen. Also switching the turbo display on the dashboard to display the DEF fluid But most importantly is the regen please.

[@professionalinspectionserv9468]

So just to confirm, this can be used for diagnostics or trouble shooting, read codes?

[@ricardosworkshop]

Yes. It's a full diagnostic scanner too

[@arthurleal2674]

Thanks, Great Video. I have the connection, 327 and user activated on Forscan. I just needed a little more insite. I have to reset the bms on a 2017 f150. I recently installed a new battery. At least now I know how to dig in there a little more to find it and reset. Now I am off to finding a spreadsheet. Again, Thanks. I will connect to truck tomorrow and navigate and save those or some of the files.

[@revbikerbigd8664]

Is there anyway to use FORScan to test door locks in my 2014 f150 XL crew cab ?? Driver's door lock doesn't work but everything else works great in the truck! All buttons work , could someone have turned it off because they only had 1 key and was afraid of locking the key inside. I made 2 new keys with auto start and adding the antenna and wire.

[@bdaspny]

Excellent! The exact info I needed. About to try this tomorrow.

[@ricardosworkshop]

Awesome! Don't forget to save your original settings.

[@bdaspny]

@@ricardosworkshop thanks to your video I did my first mods using forscan and they worked first try. Thanks again!

[@humbleyourego6053]

Hello, maybe someone has asked this question already, however I cannot seem to find any info. Can I use this software to reprogram abs and srs modules on 2007 Ford f150?

[@johnjohnson1313]

My 07 Mustang is having an intermitant problem with the starter relay-pcm-ign switch system. I think it might be a wiring problem. Do you think Forscan would find that? Thanks.

[@mateocarlos2674]

Is there a way to disable Auto-stop at idle, and to startup in "eco-mode" as the default settings?

[@mw3designs]

Can you make changes such as tire size with Forscan Lite iOS?

[@Loftikaz]

So once you finish i guess you click stop, then disconnect icon right?

[@ricardosworkshop]

Yes... stop and disconnect

[@brianhendricks5326]

Any links to brake bleeding?

[@jesustrevino3452]

Can you make a video on programming an electric power steering

[@John-yr1sf]

When registering Access to forum is only available for paid members. Did something change?

[@DuyTran-j3z]

I have 2020 expedition without trailer control, how can I enable engine temperature?

[@HowToDoitright]

Best video ever!

[@theo3995]

Pls. ford focus 2019 start/stop procedure. Thx

[@motorcyclepimp]

Good job. Thanks for this. Exactly what I needed to get started. Subscribed!

[@winning564]

Oh man this was super helpful you gained a new follower today

[@calvintaylor2688]

Will this also enable you to use a new pcm installed in your car. The body control module dosnt recognise the new pcm

[@courtneyfaas1266]

Best tutorial EVER!! Thank you so much.

[@DiggidyW2]

Thank you for this very helpful and well-done video!

[@Lg1969]

Do you happen to have a LINK to the ELM327 adapter that you have there ??? I like the switch on that one

[@ricardosworkshop]

just go for the OBDLinkEX... with the discount code it's the same price

[@MarkK01]

I have tried to have someone look up the spread sheet shet for a 2016 Ford Escape and he said there is not one for my vehicle. I guess that leaves me out so I will not go through the process of buying a adapter and get forscan software. Disappointing.

[@jk4065]

Hi Ricardo, Really enjoy your tips and tricks for the F150. Any thoughts on the the OBDLink® EX auto switching OBD? Thinking about changing some settings and wanted to get a connector that will do it right.

[@ricardosworkshop]

Thanks for watching JK! I've heard good things about it. It should work fine. I haven't had a chance to test it.

[@TimHesch]

I cannot get Forscan to recognize the vehicle. I get the "Unable to Identify the vehicle" while displaying "If PCM has a custom tune installed, please enter strategy/calibraton name or part number of FACTORY PCM (ex. 5L3A-12A650-AYH)" What is the Factory PCM # for a 2023 Ford Maverick?

[@ungovernable-bc1]

OMG! You have a XOLO! I have 3 of them. Great dogs.

[@donc9751]

Great video Ricardo! Big help to me, I just ordered the obd elm327 scanner/usb connector forscan recommended. Got to looking at this because I need a new key fob for my 2014 f150, I only have 1 and that 1 quit functioning to open the locks but it will still lock it. With dealer wanting $120 just for the key fob then $60 to program it I started seeing other options online that would allow me to do this since I dont have 2 working key fobs to program it manually. Appreciate the info! I liked and subscribed! I'll be getting into more of this soon. I'll look to see if you've done any key fob programming vids.

[@joshhaney9769]

This is the video that I needed. I have a connector ordered just waiting. I was wondering though. Do you need to have your internet hooked up to your laptop/truck while doing this?

[@ricardosworkshop]

Nope. Just to download the program. No connection needed to modify any modules

[@joshhaney9769]

@@ricardosworkshop awsome. Thank you for the quick response. Just hoping the connector comes soon.

[@НикМарк-д1д]

Do you can check injectors contributions?

[@Surge_Stream]

Thanks for the video! I put in my vin, downloaded the file but when it go to. Load factory AB, it gives me a warning that says “number of blocks in file and module doesnt match, do you wish to proceed”. What should i do? Thanks

[@marceloflores2876]

Ricardo, I tried to register yesterday. I put in all my information but when I got to the "CONFIRMATION OF REGISTRATION" field, I was not able to see the "Invitation Code" that other videos show that appears in other to prove that I'm not a spambot. I tried using three different browsers, on my laptop and cellphone and the problem is the same. Have you heard of any other viewers having the same problem?

[@17hemi18]

Hi is there another way to get the Foscan docs? The links no longer work. I'm looking for the s550 docs in particular. Thank you

[@blacktalonsport1262]

Great video. How would I know what will be changed if a change is made? Is there some sort of explanation that pops up? I'd hate to change something and not know what changed

[@ricardosworkshop]

Nope. No explanation posp up. If uou follow the spreadsheet, you shiild be fine. I always recommend backing up your original settings.

[@BrucePinnock]

Thank you very much for your videos. I am a new Ford owner and I was trying to register on the FORScan site but it is asking for an invitation code. Do you know how I could get one?

[@ronald0122]

My man. Great video. Have a nice day good sir

[@arkansas-n8nate148]

Any idea why it would I would get " unable to connect to vehicle"? 2017 F250 Truck is "on". Confirms adapter connected but doesn't see the truck.

[@ricardosworkshop]

Driver installed? If its USB, it should detect it right away. Could be a bad adapter 🤷🏻‍♂️

[@samuelbrooks7854]

thank you so so much the best video that i seen you are a 100%

[@reichberger]

Great video. Where do I go to get the spreadsheet for the module descriptions? I have a 2022 Maverick. Thanks

[@matthewreisen6148]

YOOOO! Been following this forum since I picked up my new to me 2016 Black on Black Explorer Sport. Awesome vehicle and I am lookin forward to some light / stage 1 tuning and I hear FORscan is an excellent place to start! I may just have bad reasoning skills but what link should I use for a 2016 Ford Explorer Sport with the 3.5 tt engine. All I see is MY 11-15 available. Thank you kindly in advance I look forward to hearing from ya!

[@ricardosworkshop]

Thanks for watching Matthew. Checkout this one... www.icloud.com/numbers/0yl-Fqa3Gnjh8m0K-1vadEHiA#FORScan_Ford_Explorer_11-20MY

[@dhdez1654]

Hello, Why do I have to use ForScan after upgrading from a 4” sync to 8” sync 3. The system has automatically updated to my Vin#. I am trying to understand the programing process and Thanks for all your educational videos.

[@robertloera8564]

what is the module caLLED FOR THE LIGHTS

[@fccquoter19]

Ricardo, thank you so much. Great video. Do you by chance have a link for a 2013 Ford Escape Titanium?

[@DennisKenneybees]

I'm new to ForScan. It seem ForScan is only for changing accessory settings and not trouble shooting mechanical problems like charging system, ECM and PCM? Is that correct?

[@danielmccain8778]

I have 2014 f150 can I use for scan to program lights to blackout mode

[@Bronskyjustin7]

I will say, if you have iOS forscan does not work. Even with the crossover app. It’s just can’t run it. I tried connecting and it kept saying no adapter found. All the new MacBooks have no USB port forcing you to use a adapter. So you have your elm adapter connecting to another adapter instead of connecting straight to the computer causing this error. I recommend sticking to a windows computer

[@trickmytruck32]

Is forscan like fdrs witch is what ford uses

[@brandondpersonal2988]

Does the extended free license provide all of the functionality?

[@ricardosworkshop]

Yes... but its so easy to get at least 1 year.

[@cobravenom39]

I've watched 3 of your videos, and you've done literally everything but ACTUALLY MADE A CHANGE TO ONE OF THE settings. I mean the setup, switching the modes, but EVERYTHING EXCEPT ACTUALLY MAKING AND SAVING ANY CHANGES WHATSOEVER. Do you have a video of you making a change to literally any of the settings?

[@ricardosworkshop]

Thanks for watching! Keep watching... you will see the actual changes and mods!

[@SureTexan]

Is there a way to have the doors unlocked when putting the truck in park? It's one of the only features I miss from GM trucks.

[@ricardosworkshop]

I haven't seen this but ill look into it. Thanks!

[@SureTexan]

@@ricardosworkshop thank you!

[@slaphead1209]

hello Ricardos can you help me how to activate my navigation in my 2014 ford escape using ELM 327 with usb thanks

[@willbeevor4555]

Please help!! I’ve disabled TPMS, the time/clock is now reading -:- on the steering wheel dash. Any ideas on how to fix this? Thanks

[@Joe_1971]

Will forscan allow communication with the pcm to do air conditioning troubleshooting?

[@pablonunez4528]

Boss will this program my drive mode on my base model mustang I’m asking because I changed out my radio and I don’t have drive mode

[@ab672501]

have you added paek assit 2.0 2022 f-150

[@bhyche1616]

I have hyper flash dash turn signal but normal on the vehicle. Do you have a tutorial to correct the hyper flashing turn signal?

[@ricardosworkshop]

Interesting... I'll have to look in nto that. Checkout forscan.org too

[@gimmefuel7268]

Ricardo, is there a difference in getting ForScan from the forum, per your instructions vs getting it via the app? Thanks man!!

[@tonyneises5195]

Can I program my 2012 Ford Fusion, electric rack and pinion, control module with this Tool? If so, I will purchase the ELM and FORScan software licence. I also want to say, Awesome Video, thanks so much for putting this up!!!👍👍👍💯💯💯

[@jimmys5700]

Hi do you know if Forscan will program a climate control seat module on a 2003 Ford Expedition?

[@ricardosworkshop]

I'm not sure a 2003 will work. Sorry

[@nickhawes2523]

Can forscan work with a tuned truck (with an accessport connected)?

[@TIMBHMAXX22]

hi, i have a 19 edge with the transmission problem buck and jerk thing and i have been told that Forscan can reset the transmission module shift learning part but before i do anything is there anything i should know before i do this that may cause other problems or something like that? thanks

[@s75289i]

Did you apply the link for the spread sheet? I didn't see it.

[@sidr3657]

hi, thanks for the great video on where to begin. can I ask how good is Forscan with diagnostics? also could I service electronic parking brake with this kit? thank you

[@ricardosworkshop]

Hi Sid. I've heard of people using forscan for parking brake maintenance. It works great for DTC codes

[@sidr3657]

@@ricardosworkshop thanks for swift reply

[@jestruck]

Great info! Does the computer have to be connected to WiFi when plugged into the car?

[@ricardosworkshop]

Nope. Only when you update or download. Thanks for watching CRob!

[@robertwood3970]

Can you change when the radiator fans come on and go off with this software?

[@explorationsrenovations5982]

Fantastic info Ricardo. Can FORscan be used to keep the SuperDuty mirror spot lites on regardless of speed? I’ve seen a video where I guy used a bumper wire to bypass this but I wondered if FORscan had an option to do that. Thanks.

[@ricardosworkshop]

Nope... FORScan can't do it but this will work... kzbin.info/www/bejne/jKrYd6GFlNaZjcU

[@explorationsrenovations5982]

@@ricardosworkshop yep. That’s the one I saw. Thanks.

[@ahmedal2333]

You are such a big help!! God bless Bro

[@ahmedal2333]

Hi Bro, Do you have 2019 Escape spreadsheet ? I need to add climate control icon on the screen . I will be thankful if can help with that .

[@ukaszrugaa104]

Where to find descriptions for others ford cars?

[@deanzavitz1534]

Hey, wondering if Forscan will let you change your HVAC controls? (Manual climate control to Auto climate control)

[@ricardosworkshop]

With the right hardware plugged in, it should work

[@deanzavitz1534]

@@ricardosworkshop I have a linkswell Tesla screen I’m installing, however it’s an older gen for a 8” with auto heat. HVAC not working I believe due to truck module not knowing the new auto circuit board. If I can change it from manual to auto with Forscan then I should be Gucci! 👍 thanks for your input! Have been having a rough time with getting this working.

[@killer1245thug]

2015 ford Taurus will it work

[@garybruno4360]

I have a 2019 Super Duty F350, how does it compare to the F150?

[@ricardosworkshop]

Very similar.

[@j.arreola]

I have a hp chrome laptop core13 8th gen will it work on this to download and connect to forscan?

[@dalebabbitt6185]

Thank you, I just liked and subscribed to you channel. I'm more interested in diagnosing. Do you have anything posted that's more in depth using live data and merged graphing for O2 sensors, MAF, MAP etc? Thanks again!!!

[@ricardosworkshop]

Thanks for the sub Dale... I'll look into that.

[@bradvincet1848]

So only backup the AS BUILT modules, right?

[@TheOzthewiz]

Will forscan work across ALL Ford models or just the one you register with. Ex: I signed up with a '15 Escape, was successful in adding navigation to my FE. Now I want to use forscan to troubleshoot my '13 Focus. When I connect the USB pass through to the Focus, the program doesn't recognize MY Focus, instead reads off stored information for a 1999 1.8L ECO boost Focus. Is this because I didn't register with my 2.0L '13 Focus?

[@ricardosworkshop]

It should work on every newer model ford. But each might work a little different. It shouldn't say 1999... thats wierd

[@eliteservice7532]

Do you know where I can get spreadsheets for a 2010 Explorer?

[@mikes1127]

What should you do when it says No ELM found when your trying to connect to vehicle. I've double checked my connections, made sure it was switched to HS and the vehicle is on power mode. Thanks

[@ricardosworkshop]

It's probably the driver. Or bad connection.

[@tropic22]

Why do I need to register for the forum? I am trying t register but it says I need an invitation code.