FOTILE In-Sink Dishwasher SD2F-P3 Installation Tutorial

[@BETTERTOMARROW]

I would have been lost if it wasn't for this video. Simple to follow step by step instructions. Great job, people 👏 👍

[@matthewklabnik2178]

This video is key to making install easy. My only comment is that the tail pipe shown has the extra connection for a dishwasher that serves no purpose. Just get a straight tailpipe without the extra connection. I figured that out after I started but (un)fortunately it was three trips to the hardware store for other things as per usual.

[@sclmitchell]

I saw a 1950s film that had a topside sink/dishwasher combo. I thought it was fantastic

[@chazzsnyder9484]

I've seen it out of the box. [Customer's] No Idea where the parts are. I'll let ya know how it goes. Looks simple but so rarely is plumbing straight forward..why I like it. 👍

[@letishadolor2082]

Great work!

[@Jae31st]

3:30 You did not push exhaust pipe fully on over flow pipe. Shouldn’t it be push on until it reach the ring around pipe?

[@daryls6621]

10:57 nice electrical hook up.

[@gabriellachristineT]

How are you connecting the strainer tail pipe disposal drain to the dishwasher i’m not using a garbage disposal and need to know how to connect this section

[@feelosophy1921]

Didn't see the answer to my question. Does the water from the dishwasher go through the garbage disposal so you don't have to clean the dishes first before loading the dishwasher?

[@dazelrules224]

Doesn't the dishwasher attach to the garbage disposer or tailpiece

[@danev6972]

Would like to have the dishwasher alone. In case it breaks, you don't have to replace the whole sink.

[@shawneelaw1]

What state is this? NYC/NYS has a different setup. I believe there’s 18 inches not 21

[@camillebarmore6612]

You didn't connect the tailpipe to anything - is it supposed to just be left open?

[@markstark4576]

For garbage disposal

[@markstark4576]

I'm sorry I followed plumbing at first wasted parts and time. There is two overflow vent hoses and small electric drip hose....as he plumbed these they are not trapped unless trap under floor ...then it doesn't matter. Better to just put to divided Tee in between like normal double basin....drop into trap ...this gives you a swing joint to make up for slight angle connecting DW to the sink...then into pvc glue pipe. Mine look

[@tadadamski9001]

I wouldn't add the caulk to the sink bottom but on the countertop. Put a small stick on each corner and set the sink on. This allows you to position the sink unit then drop each side the last 1/2". Also, there are some connections that a crescent wrench should be used, not channel locks. You can squeeze the nut out of round on the inside. Professionals?

[@ОксанаКоржова-р3й]

В Казахстане таких моек нет.

[@squirreltastic-k5v]

this dudes not a plumber. You don't need teflon tape to attach the 3/4" adapter. It already has a rubber washer. LAME