FOUR Cylinder 1/6th Scale RC Car Build - Engine Installation & Transmission

[@ThePower1037]

This is so beautiful, you need to put a quieting muffler on it, because something as clean as this needs to sound as smooth as it looks.

[@adamwolfy4826]

Agreed

[@rukiddin0669]

Imagine a low rumble out of a model car... that would be awesome.

[@tightbootyhole707]

Better stop licking

[@scumtastic7781]

This man needs to build and unequal length header and a nice side pipe .. and a filter for the trumpets

[@gunsmoke132]

Nahhh fuck that. Loud and proud!

[@キャスト-o9m]

I'M not good at writing English, so I can't tell him my true feelings. But i can write it that this contents is seriously cool!! I'm cheering from Japan！

[@sheerluckholmes5468]

グーグル翻訳は非常にうまく機能し、少なくともほとんどの人にとっては十分です。

[@4l3xromeo]

Your English is not bad! Have more trust in yourself! Hi from Cyprus!

[@cvspvr]

your english is very good. i'd write what you said as, "i'm not good at writing english, so i can't tell him my true feelings, but i can WRITE that this CONTENT is seriously cool. CHEERS from japan"

[@notna7197]

Bro your better then me and I’m from Australia

[@Silverdev2482]

your english is very good

[@AC-hn4zb]

So glad you decided to put a fan on the radiator. Good call, and can't hurt.

[@biplabray4881]

L

[@jamescootes4506]

@@biplabray4881 1wa}}

[@blazetaylor367]

instaBlaster

[@jasonsnagel]

I think nitro would burn quite cooler but like you said it can’t hurt

[@daniel_watkin]

A transverse mid engine rear wheel drive I4. Its a mini MR2!

[@jamespierce2415]

This motor may have more displacement than an mr2

[@MuhammadAli-ff6il]

@@jamespierce2415 lmaooo

[@DarkIzo]

aaaaaand we found our bodyshell form

[@jameshoffmann5643]

Supercharge it and then ya really got an mr2

[@landmo6481]

Or a Fiero!

[@JV-lq3tx]

First time I've ever seen a video say no view. Can't wait to see how this project turns out!

[@Nmi06]

This guy litterally changed my life, i've been watching him for a little over a year now and i just love the way he makes his videos.

[@hugacreeper69110]

He’s the reason I spent way too much on a mini 4 stoke

[@Nmi06]

@@hugacreeper69110 he got me into cars and stuff so me and a couple of friends got a little turbo from a van and we put it on my 10hp outboard boat engine and it worked for a little before it blew up xD

[@menom7]

Same with me as well!!! I NEVER miss an episode of his!!! His attention to detail is unsurpassed!!! :-)

[@RGV2300]

I thought you were about to say he changed your life in other manner, like if you've become a latte specialist or something like that.

[@5PLANËSGÖ]

When this guy pulls up at a meet with this and they ask questions he be like....... Car guy: what's under the hood? Johnny: Yeah it's stock with a engine swap, custom body, 1,000hp, Natural Aspirated of course, with all handmade internals. Car guy: it ain't stock is i....... Johnny: nope

[@propyro1156]

It would be cool to see this motor in a RC sand rail buggy, with a full tube chassis.

[@RamenPoweredShitFactory]

something Cyconxc esque.

[@PoPordon]

You should check out Timsane on YT! He also builds crazy stuff! Found him weeks ago

[@laymanengineer7502]

I really like this idea!

[@Matty.Hill_87]

Check out timsane projects channel.. He is doing just that

[@Matty.Hill_87]

@@PoPordon check out his previous build, it was incredible

[@ANKCreative]

Crazy engine 😱

[@frankierzucekjr]

That thing sounds like a monster. I can't wait to see the top speed. I have the Schumacher truck, I've had it for almost 20 years. My uncle and I used to build and drive these things all the time. He would have absolutely loved your channel. Phenomenal work as always bud. I cant wait to see it finished. Rip Uncle Steve

[@memeAlexcheramie]

That little motor SCREAMS

[@troyguererro0898]

I can see the transition into the improvement of your craftsmanship. As far as I know, the first video that I've watched on your channel was the tesla turbine; I must say, that was epic. ---- But your editing skills and craftsmanship is incomparable before. Salute to you, from an engineer.

[@discovertravellers1724]

That's awesome 😍

[@zreolmeannin]

I think the position of the engine suits a roof scoop, that would be really cool

[@G3orge3670]

This rc car is great but I have for you a different challenge If you can make an rc engine out of scratch

[@Matty.Hill_87]

That would be cool to see

[@G3orge3670]

@@Matty.Hill_87 I know

[@hamster9135]

Doing an engine from scratch would be very hard, but Johnny might be able to pull it off. I wonder what engine configuration he'd go for.

[@G3orge3670]

@@hamster9135 well eny engine can be built from scratch easily with the right equipment

[@bryantnecessary7719]

The future of RC cars. our kids kids will buy these off the shelves and have huge aftermarket list.

[@rcWizzard]

JohnnyQ90 Keep in mind, Heat does not scale down. Your engine will get to full scale temp's, you need to have as much water as possible to keep your engine safe.

[@nerk234]

..watching and earing the CNC at work...👍

[@clutchkicker-k8c]

I saw a Toyan L400 twin turbo and turbo build here in KZbin. Where have you been, you need to do something similar!

[@connor3277]

Someone needs to do quad turbo

[@jaredapplehans3692]

It was a compound supercharger build! And honestly it didnt seem to make any more power than the stock toyan, just made it run like crap lol

[@MATEKYOO]

Warped perception

[@5PLANËSGÖ]

Video name plz and thx

[@clutchkicker-k8c]

kzbin.info/www/bejne/sJnPk6CNZ9yme7c

[@zulkiflisaadon4064]

When someone have basic in engineering science shows their skills to common people...WOW

[@VintageCR]

my goodness the sound that thing makes is absolutely brutal and ear pleasing! :D

[@nothingiamjustsomekindofdu5744]

indeed

[@KarlHamilton]

What an absolute legend 🙌

[@yeysbaws]

He’s actually BUILDING an engine! What did your parents feed u when you were a baby? Why do people have this kind of knowledge and talent? When I can’t even build my own tent when camping? Life is unfair

[@colin_deans]

FYI He didn't build this engine, but I agree he's a very mechanically skillful and talented guy.

[@haznkaz]

He’s not made this engine they are readily available on the internet.

[@Kvn_450]

Go and make it fair with your own two hands and mind

[@yoanesmulyanto2527]

Don't worry, we're same

[@Itzalwys1420]

@@haznkaz also, INSTRUCTIONS 😁

[@AidenMi]

this guy could be deaf and he would still have his insane skill.

[@Itzalwys1420]

WHAT

[@GW18907]

This guy gives off really smart engineer vibes

[@PopShot76]

You actually do the things that I sit around and daydream about. Impressive stuff!

[@coreyarmastus6189]

This person is such a good machinist when they were making the shaft I forgot what they were making in general

[@buckroger6456]

This is probably the coolest rc car project I've ever seen. Also can we just pause for a moment here! This guy is machining his own parts 😲

[@JazzbLu]

What a sweet build so far! I am so excited to see the next video on this! Thank you for mid mounting the engine toward the back.

[@turbotonye-4124]

Ok this is ridiculously awesome. Being able to Machine and manufacture your own parts is a huge advantage but have this much knowledge is priceless. R/C has come a long way since the days of my Team Losi XX and XXT that’s for sure. Lol

[@medajim9092]

wow. if i had all those nice tools.... my stuff would still look like crap. Excellent Job Johnny!

[@axelcottocotto5626]

This RC car is goin to be super awesome when it's finished👀

[@altair1337]

I got recommended these videos randomly, now I'm hooked. This is fascinating, how come this isn't more popular and known!

[@jakepruitt5588]

Nothing gets me off more than a clean and precise work environment. Never been into RC cars like this but your vids are dope. Keep it up fellow machinist!

[@CMBProjects]

Another amazing video Johnny. The drivetrain looks very nice! I can't imagine how good would be my homemade RC cars with those tools!

[@funnyanimals8053]

I hope you will make a 4-rotor OS rotary engine one day 😎

[@brianbak6405]

This is Art.! I have the out most respect for people that can think out stuff like that and make it a reality..! Amazing.. Thank you

[@johnkilo3]

I would love to see one of these Toyan engines make a high speed pass. It seems every video on KZbin of them in an RC car is a 1-2 second full throttle blip and then stop. Great work as always, though.

[@clayboi6939]

Very cool! Excited to hear the full exhaust. Hopefully you can get it sound more like a car than an open header street bike!

[@NeutralGenericUser]

Amazing project! Can't wait to see how it turns out, but I wish it could've been mounted longitudinally rather than transverse :(

[@urubudopixinvestimentossa2521]

video is recent?: yes any language got it?: yes (I am Brazilian and I barely speak English) long video?: yea waste of time?: no is there enough details?: yea clickbait?: nop would recommend to friends?: yes like?: FOR SURE! ❤️❤️❤️❤️❤️❤️

[@Postbus22]

and subscribe!

[@urubudopixinvestimentossa2521]

@@Postbus22 yes it is

[@IngenTechNational]

Dude that is EPIC I need to get started on my build!!! You could make it into a FWD car if you add steering to it!!

[@buildindian8169]

I used to enjoy building RC cars and engines but all my old friends who I used to drive with .are dying off and I can hardly see shit these days but I love what you are doing..

[@maglogni2922]

This is gonna be such a cool project!

[@AlexR1298]

Basically a 1/6 scale Toyota MR2! Awesome!

[@exoticg9]

I can't get enough of this channel !!!

[@aserta]

I'm curious how it will behave, i mean, if you don't do anything to the weight ratio, it should be a very happy jumpy RC, well, also depending on wheels, but yeah. Beautiful setup btw, you've really come into your own with these.

[@yitami2000]

Oh my god imagene rc car companys do this kind of amazing work with tiny realistic engines with turbos and all of that cool stuff

[@joshuasterling2144]

This will have really nice results, I think you are pleased with the progress and as usual its always fun to watch the process.

[@bennyhanna1976]

I feel so inadequate after watching these videos. This is a true craftsman at work. Amazing.

[@LBCAndrew]

Johnny, you are truly a mad man.

[@cengpo]

Wou dasyat menyerupai asli nya bosku

[@wickednoreaster]

Watching this instead of getting ready for work

[@hex8387]

That could be a pretty kick ass F1 model

[@IllusiveChristie]

This is sweet! I'd love to see someone make a front engine rear wheel drive like this..

[@ArcturanMegadonkey]

Sounds fantastic! just need to rig a throttle/brake and steering servo. Make sure the steering servo is a high KG pull.

[@rcflo7300]

Wow it Looks Like this is going to fly Like a rocket

[@frankdesire3245]

Finally a engine that runs nice

[@TheDrivenDemon]

that little engine sounds like a beast!

[@kurniahorison5374]

Nunggu dipasang exhaust-nya... Pasti tambah sangar suaranya..👍👍

[@JoaquinDiaz-eo4no]

You should build a complete 1/5th scale car with total realism, you could totally do something kickass!!!with that toyan.

[@morgenni]

The fact that he's not verified is mineblowing

[@MrSonomazr2]

They don't get much more talented than you johnny

[@rcpatapouf]

great choice the savage 3 speed transmission! it will be very strong

[@Aaa-qw6ly]

This is art. Love from Pakistan

[@flusneez]

Perfect time for relaxing video

[@dennisdempseyradiooutofcontrol]

Nicely designed! Love to see your work

[@zesserfrmbl007]

Brooooo this is by far the coolest thing on KZbin...

[@InYourDreams-Andia]

That intake and exhaust growl is totally insane. The inlet ducts look so RAD!!

[@YaBoiSheen2779]

I really want to see this thing on a dyno once it’s finished. Prolly not gonna break 2hp, but It would be interesting to see what amount of power such a small thing could make.

[@abhishekkarmakar6148]

I can clearly tell your work is lovely just like your other builds.

[@DoRC]

You can just use something like oven cleaner to take the anodizing off the chassis and then leave it bare silver.

[@paulsedyps84]

Are the people who dislike this video joking ?? That's some amazing skill

[@bradleydenhartog7297]

Can't wait to see the finished product

[@curtisnewton895]

gorgeous...the engine is so pretty you should have it visible even with a hull

[@EL34XYZ]

That thing sounds so cool!

[@laymanengineer7502]

By far, the best build yet! I like all your builds though. That 4 cylinder would be a good one to supercharge! Just saying..

[@david06101981]

Man your channel is probably the only one I don’t mind watching ads to support it, it’s so satisfying to see you making those awesome toys, I really enjoy every minute of it!!!!

[@johnnyq90]

Thank you!

[@barlynuribe3887]

That engine sounds NICE!

[@kellyherald1390]

Running 25% nitro really woke that engine up. You should also look into coming up with a timing belt cover for that engine to keep rocks from getting into the timing belt. That could do some damage.

[@AJB2K3]

Cant wait to see this running on the road.

[@bboydrummer1]

An HPI Savage gear cluster! Nice choice!

[@keefbrown]

What a perfect day, 3Dbotmaker and Q90 on the same day...

[@xedieukhien]

*Wow video car rc very good*

[@jessewest1545]

This has to be your cleanest build yet. Keep it simple. This thing is gonna rip !

[@DilvaCh]

woow...amazing..thanks

[@jaynobles.215]

3,000 views and 420 likes in 15 minutes nice

[@JCBDozer]

Wow Amazing Technology 😮

[@AudioAndroid]

The Beast has awoken and craves pavement!

[@ononewheel7]

You my friend are a bad ass this is so satisfying to watch 😎

[@Ldpoffroad]

great! a muffler who sounds like a micro 4cyl bike could be gourgeous😍

[@shoegum7362]

Every freaking hobby out there, there's gotta be that someone who takes it all the way to triple S rank.

[@Zach-ci1lz]

I am always amazed by the projects you do good sir. Keep it up

[@guigui78340]

i hope the engine manufacturers are working on all sort of engine layout it’d be so cool to see inline 6, v8, v10 and what not even.

[@sebastienlopico9677]

un maitre tourneur vraiment tres fort

[@Serg010]

Как же это круто!

[@nickofullo2469]

it is even more perfect if the back of the radiator is given an additional fan to make it cooler😍😍😍

[@mariosraftopoulos6648]

Είσαι ωραίος μάστορας. Όμορφες δουλειές. Μπράβο.

[@drakevelazquez8728]

Can’t say I would be opposed to watching you design those components as well. Clean work man!

[@ArneChristianRosenfeldt]

About the gearbox. In a large car the automation of it needs to be cheap because otherwise you would just go hybrid. But here we can use a pair of bass voice coils or solenoids to change gears? On a race car the first gear matches torque. You start with the clutch and then pull the engine from 1200 RPM to 8000. Then we switch gears to 6000 RPM. So the electronic closes throttle, pulls out the cogs, then watches the 2000 RPM delta to the next gear ( 10 Hz ) and precisely jams in the cogs into the respective holes. A long thin shaft to the rear acts as a twist spring and eats the shock. Wheels spin a bit.

[@ArneChristianRosenfeldt]

The flywheel helps a bit, but basically an engine with 4 or less cylinders and more then 1:6 compression has negative instantaneous torque: ms periods of time where the engine has no surplus energy for the drive train. I propose a CVT where a push rod or connect rod is relocated on a large drive disk (pair). The large wheel has egg carton pattern. A robot arm presses the connection rod end into this. Then pulls out and relocates. Maybe tandem arms. Voice coils are used to inject short torque pulses into the disk and the flywheel to match a position on the fine grid exactly. So this makes an irregular clicking sound with the same repetition as the ignition.

[@macbouncer8525]

Disc brakes are almost essential, FG do a complete hudraulic drilled and ventilated disc kit, its very good on 1/6th scale :-) Chassis might need to be a bit thicker.. theres some serious forces at work in there. Ally has a modulus of about 69, carbon fibre of the same thickness between 90 and 190!! nice work.

[@brettweerasooriya3776]

I feel like the radiator and throttle bodies should be facing the front of the vehicle. That’s where the clean and cool air is.