Four Million Tiny Mirrors: The Insane Engineering of DLP and the Future of 3D Printing

  Рет қаралды 560,566

Zack Freedman

Zack Freedman

Күн бұрын

There's huge power in this 3D printer's tiny mirrors.
Get a Photon D2 DLP printer: bit.ly/3B7MIKx
In this episode, we bust open a rare DLP resin printer to show how microelectromechanical systems - nay, microOPTOelectromechanical systems, make impossible tasks trivial. This fusion of SRAM, electrostatic actuators, micromachined springs, and graphics circuitry enables us to build incredibly precise, powerful, and high-performance displays. There's a science fair model, tiny Warframes, a projector that's also a car headlight, half a snake, and penny-pinching regret. It's a fun time.
About the title: the Photon D2's resolution is 2560x1440, but on the DLP chip, those pixels are surrounded by a buffer zone of partially-broken micromirrors. It's a method of increasing production yield, and means that even though this 2k printer drives 3.68 micromirrors, the chip itself contains well over four million in total. Most of those could function, but the display driver leaves them in the neutral position to keep the resolution predictable.
Join our welcoming maker community: / discord
(I'm there all the time!)
Models:
🌸 Warframe Protea by Fanaatti and Digital Extremes: cults3d.com/en/3d-model/art/w...
🌺 Warframe Lotus by Sinsaberius and Digital Extremes: cults3d.com/en/3d-model/game/...
🤺 Excalibur Noggle by Willow Creative and Digital Extremes: willow-creative.nl/download/e...
🥦 bROCKoli by Plastic 3D: social.thangs.com/m/39237?utm...
🐍 cobra.stl by boonsawangpanida
social.thangs.com/m/264728?ut...
⚱ Vase thing by Anycubic, included with printer
Timetable:
00:00-01:50 DLP, Anycubic, and You
01:50-03:42 Tiny Silicon Machinery
03:42-05:58 My Model Micromirror
05:58-06:38 What DLP Can Do
06:38-08:10 LCDs Kinda Suck
08:10-10:05 Why DLP is in Every Projector
10:05-13:26 LCD Printers Kinda Suck
13:26-14:58 Why DLP is Great for Resin
14:58-18:00 Thankies
The following copyrighted material was used as permitted by fair use and/or license terms:
• Ratcheting MEMS motor: NIST (US Government) www.nist.gov/video/tiny-gears...
• Other scanning-electron microscopy courtesy Sandia National Laboratories, SUMMiT™ Technologies, www.sandia.gov/mstc
• Chip fabrication + cleanroom footage: Intel Inc
• Photon Ultra footage: Anycubic
• DLP optical microscopy: SIC66SIC66 • DLP projector chips (DMD)
• DLP Cinema intro, DLP principle-of-operation, LightCrafter 2000 EVM footage, headlight demo: Texas Instruments
• Where's Waldo chip art: Michael W Davidson and the Florida State University micro.magnet.fsu.edu/creature...
• Interference SFX: Partners in Rhyme
Opinions presented in this video are NOT paid endorsements and represent my sincere thoughts. Anycubic provided nothing but the printer and a fact sheet. They exercised no editorial control and requested no edits.

Пікірлер: 1 300
@Shiftarus
@Shiftarus Жыл бұрын
"A matrix made of millions of miniature mirrors and motors that measure mere micrometers." is possibly the best alliteration the world has ever seen.
@aceplaya84
@aceplaya84 Жыл бұрын
say that 5 times fast ! ha
@CD-vb9fi
@CD-vb9fi Жыл бұрын
Yep, I gaffed a bit when I heard that.
@battelchicken2
@battelchicken2 Жыл бұрын
Idk, that seashell one fucks me up
@kimjong-un7851
@kimjong-un7851 Жыл бұрын
Oh that's why Audi calls it matrix led light 🤓
@DonCarlione973
@DonCarlione973 9 ай бұрын
Oh, that's nothing. He's got plenty more of those!
@jonasdatlas4668
@jonasdatlas4668 Жыл бұрын
DLP is still something between black magic and insane technology to me.
@p4inmaker
@p4inmaker Жыл бұрын
This tech seems like they pulled it straight out of a flying saucer. Never stops amazing me.
@deathcube2006
@deathcube2006 Жыл бұрын
@@p4inmaker it wouldnt surprise me. It's from Texas Instruments so must likely a tech out of area 51
@whoho1
@whoho1 Жыл бұрын
@@p4inmaker you gotta take a deep dive into mems technology, some of the cutting edge stuff of the past 10 years is wild.
@reedlawrence4697
@reedlawrence4697 Жыл бұрын
“Any sufficiently advanced technology is indistinguishable from magic.” - Arthur C. Clarke It's really exciting that we are getting to the point that we are making magic instead of technology!
@eepynicky
@eepynicky Жыл бұрын
nice profile pic
@cyanocitta3728
@cyanocitta3728 Жыл бұрын
The fact theyre using anti-aliasing on 3d prints is absolutely wild to me. This tech has come so far in such a short amount of time its amazing
@rodiculous9464
@rodiculous9464 Жыл бұрын
IRL antialiasing, who'd a thunk it
@jonathandill3557
@jonathandill3557 Жыл бұрын
I worked for a Traffic Management Center that used DLPs in their video wall because they didn't burn in as much as LCD or plasma showing the same intersection for hours and could be had with almost invisible bezel. They also avoided the cooling problems of plasma at that scale.
@woosix7735
@woosix7735 Жыл бұрын
Sam Zeloof even used a DLP project to expose photoresist to make homage silicon chips, so if it’s detailed enough for that, it makes sense that it could be used to make 3D printers more detailed
@Roxor128
@Roxor128 Жыл бұрын
Aha! Someone saved me the trouble of mentioning him.
@ThisSteveGuy
@ThisSteveGuy Жыл бұрын
I, too, remember the couple years we had of rainbow vision in movie theaters. It was especially noticeable in high contrast scenes with motion, where your eyes would have to move across the screen. You'd see rainbow trails on the edges of objects and it was horrible.
@priceisalr1ght
@priceisalr1ght Жыл бұрын
I purchased a cheap portable no-name projector off of Amazon last year and I can confirm the spinny RGB wheel method is still in use and the individual colors are really easy to see in high contrast scenes if you turn your head quickly.
@thebaudcoder650
@thebaudcoder650 Жыл бұрын
is that what that was omg i just thought it was all the lsd
@chancemcclendon3906
@chancemcclendon3906 Жыл бұрын
omg i remeber asking my parents why it had rainbow edges and they looked at me like i was insain..
@StormBurnX
@StormBurnX Жыл бұрын
@@priceisalr1ght comments like this remind me that while DLP projector resin printers will exist, LCD resin printers will never become fully obsolete, as long as there is a market for lowest-cost, lowest-price products like Amazon / AliExpress / Wish / etcetera I mean, hell, we still have FDM printers despite MSLA and SLA/SLS printers existing, so....
@brandonbrown3600
@brandonbrown3600 Жыл бұрын
@@StormBurnX that last little bit lmao. FDM serves its own purpose of functional parts that resin can not produce. Resin parts while tough are brittle in comparison and can not do all that FDM can. Both Resin and FDM will continue to exists unless a do all product comes along. Not everyone prints minis and detailed items.
@biglonie
@biglonie Жыл бұрын
Zack is literally giving us us a college level lecture on break through technology for free! WHAT A TIME TO BE ALIVE! Can someone please give this man an honorary doctorate and Ensure he remains comfortable and motivated enough to continue! Wow!
@TheCopperGrasshopper
@TheCopperGrasshopper Жыл бұрын
- and like most collages nowadays, inserting current day politics into everything. What a waste.
@orbita1
@orbita1 Жыл бұрын
@@TheCopperGrasshopper shh
@jean-mauricenestler3761
@jean-mauricenestler3761 Жыл бұрын
@@TheCopperGrasshopper When did he do that? Seems like I missed it
@Laura-hl3hg
@Laura-hl3hg Жыл бұрын
And just imagine how this'll look just a few papers later!
@Billy-rz1jg
@Billy-rz1jg Жыл бұрын
@@TheCopperGrasshopper Politics has always been everywhere. Noticing it now has a lot more to do with yourself than the world surrounding you.
@UncleJessy
@UncleJessy Жыл бұрын
Good lord… this video was glorious. Will be referencing this video whenever I or someone asks me to explain DLP… knocked this one out of the park
@Gersberms
@Gersberms Жыл бұрын
That voxel closeup was amazing. Great job on the intensive purposes.
@purplelord8531
@purplelord8531 Жыл бұрын
this was a really cool demonstration and explanation of a technology that I could have never understood while reading about it! I love both of your styles of video, so in my opinion you should do more of whatever type of video you want to make
@shableep
@shableep Жыл бұрын
Yeah! One of my favorite presentations on tech.
@Wingpad
@Wingpad Жыл бұрын
This was an awesome vid, thanks for explaining DLP’s benefits and workings so thoroughly and considering us listeners. Would love to see more videos like this one!
@seanmcne
@seanmcne Жыл бұрын
The writing on your channel is on point 🔥 love it! Can’t imagine how much time is spent on it but it’s appreciated and entertaining 😀
@pseudotasuki
@pseudotasuki Жыл бұрын
Yes! DLP is such an underappreciated technology.
@pseudotasuki
@pseudotasuki Жыл бұрын
Holy crap. That SRAM observation is brilliant. I'd love to see someone actually implement it.
@pseudotasuki
@pseudotasuki Жыл бұрын
Was that a Pinecil? This might be my favorite episode and it's an ad!
@MattBeaver
@MattBeaver Жыл бұрын
@@pseudotasuki that was a TS80
@pseudotasuki
@pseudotasuki Жыл бұрын
@@MattBeaver Dang. Boo.
@bakedbeings
@bakedbeings Жыл бұрын
@@pseudotasuki Related radness: One of the earliest memory solutions (1940/) was a crt, the Williams Tube 😳
@doomgod314
@doomgod314 Жыл бұрын
Little Bobby tables had me dying. XKCD classic. Thank you for the awesome showmanship, sharing a technology most people don't even know they already love.
@johnsmith-ug1xx
@johnsmith-ug1xx Жыл бұрын
recently got into 3d printing for some projects I'm working on and came across your channel. You are one of the most entertaining youtubers I have ever come across completely underrated. Keep it up man! much appreciated!
@miniknights
@miniknights 2 ай бұрын
Your technical detail here is the reason I subbed after watching like 15 videos over the last few days. Super appreciate the depth.
@Slide100
@Slide100 Жыл бұрын
Zack, you are DEFINITELY not the only person old enough on KZbin to remember those rainbow nightmare projectors. 🤨 Thanks for the video!
@C-M-E
@C-M-E Жыл бұрын
Watching the DLP 'home version' come to market has been exciting to say the least. If you take away nothing else from this video but are into resin printing, DLP defeats having to change the LCD screen for several years; you'll likely be replacing other major components before the DLP module. Just wish the Anycubic version was a bit larger, but all good things come to those who wait. And wait, and wait...
@the_arcanum
@the_arcanum Жыл бұрын
This being their second iteration of the product, I'm really excited to see comparative tests now that they've doubled the resolution of the chip from 1280 * 720 to 2560 * 1440 while adding 62% more surface to the printing plate size. I expected Elegoo that was rumored to release one base on the same design principle in march to beat them to it. It's sure exciting times for resin printing.
@jubuttib
@jubuttib Жыл бұрын
Yeah, really wishing for a larger one. I'm currently looking at getting into resin 3D printers, and would like something in the ~20 cm range, like the Saturn 2, but a DLP would be massively preferable overall. Even if it cost like a 1000€ or slightly over, that'd be basically 5 LCD swaps vs. the Saturn 2, and the DLP supposedly lasts 10x. I think simply because of the size I'm gonna have to go with an LCD printer (it's not like they're BAD), but DLP as a technology makes immense amounts of sense.
@sethstewart1103
@sethstewart1103 Жыл бұрын
Actually, I have seen that good things come to those who build them.
@ChunkySteveo
@ChunkySteveo Жыл бұрын
One of the best explanations and demonstrations about DLP, seriously good work Zack!!
@scottwilliams895
@scottwilliams895 10 ай бұрын
Every one of your videos is so much fun to watch!
@jettthorp9444
@jettthorp9444 Жыл бұрын
I honestly just started laughing when I realised the printer was so precise, it was showing the imperfections in the *model*, that's absolutely stunning. At the levels of detail that thing can capture, painting anything would almost be a waste, as I'm not sure you could find a paint thin enough to retain the small details 😂
@KiWeWi
@KiWeWi Жыл бұрын
"it was showing the imperfections in the *model*" Or more accurately, it was showing the fact that the model is rendered into a series of images which have pixels. The fact that it can essentially render lossless information out of those images down to the pixel is ridiculous. Literally pixel-perfect.
@toketokepass
@toketokepass Жыл бұрын
You thin your paints by mixing them with a small amount of water, on a wet palette. That or airbrushing.
@wayland7150
@wayland7150 Жыл бұрын
You could probably print butterfly wings which are colourful without pigments.
@xenontesla122
@xenontesla122 Жыл бұрын
@@wayland7150 Not quite, for that you need detail at a scale too small to see, even smaller than the mirrors. You might be able focus the light to that size, but then you couldn't print anything larger than the DLP chip.
@Nobody-Nowhere
@Nobody-Nowhere Жыл бұрын
Its also a lot to do with the fact that you are using a lens to focus the projected image. In LCD printers.. the image is sharp at the level of the LCD.. but the actual printing happens further away from it so the projection has already softened a bit. But this also requires a lot from the optics... as its really hard to design lenses that has zero distortion and equal resolution across the field. Though designing the lens for single wavelength really helps.
@sajinkahnalt
@sajinkahnalt Жыл бұрын
The protea model was very nice btw. The other Warframe content was a nice surprise too. Not sure where you managed to get the models for them but they look good. Outside of that the tech you described is absolutely mind blowing and I’m very pleased with the quality and simplicity you delivered it with.
@xkabauter
@xkabauter Жыл бұрын
Interesting and poetic as ever. "Liquid crystal display display" made me chuckle.
@hazonku
@hazonku Жыл бұрын
DLP truly is magical. I recently bought my first DLP projector and laser based autofocus and automatic keystoning is SO friggin' cool. I can't wait for DLP printers to become affordable! Also yes, I recall the rainbow years. Everyone said I was crazy until I finally figured it out.
@KomradZX1989
@KomradZX1989 Жыл бұрын
This video was soooooo good. I know your a maker but I’d love to see more videos of you explaining how the world around you works. Great video!!!
@nizar429
@nizar429 Жыл бұрын
It's so pleasing. The setuping and mastering softs amazing.
@TheJacklwilliams
@TheJacklwilliams Жыл бұрын
Your sponsors alone show the magnificence of the work put forth. Truly Zack, your an incredible teacher. You should in your journeys, leave no stone unturned and explore all that their is to explore.
@GleinserMaphet
@GleinserMaphet Жыл бұрын
I know every time you upload I’m going to have a good laugh and it makes me happy. Thanks for the great videos. I really appreciate all of your hard work!
@srboromir452
@srboromir452 Жыл бұрын
I've been using a couple open DLP printers at work for a few years now, so I've been able to get any resin and make a profile for it, so so much faster printing than the old form 2 Edit: I work in dental, all of my models are fingerprint surfaced looking voxels lol,
@marc7425
@marc7425 Жыл бұрын
I've not tried DLP printers, but I've got a Mono screen resin printer at home, and it is so much faster and easier to use than the Form 3 I had the "pleasure" of working with during my internship at a company during my education. I legitimately don't think I fully understood how workflow is supposed to work with the Form printers, but it was a massive pain to do anything with it compared to my own printer at home.
@cameronmalchow7597
@cameronmalchow7597 Жыл бұрын
@@marc7425 Form 3 machines use lasers to draw the pattern into the resin, this takes considerably longer than mSLA and DLP resin printing. However, models that come out of the Form 3, when printed using their own resin, is supposed to come out cured enough that it doesn't need to be cured further. That's what I heard at least.
@justaperson1144
@justaperson1144 Жыл бұрын
Howdy fellow tooth tech!! :) I just got 2x D2. and I want to use Asiga denta model resin and Keystone soft. Which resins have you profiled so far? I never 'dialed in' a resin though. Do you like the D2? I also have an Asiga Max Uv and just bought the anycubic M3 plus but the d2 is my main focus. It is kinda noisy truth be told. Do you have any parameters to share? The printer instructions say not to use SLA resin only DLP resin
@srboromir452
@srboromir452 Жыл бұрын
@@justaperson1144 so right now we're using an envisiontec envision one, two older open printers, Miicraft 125, though other companies sell it under other names, we started using the new keystone model material,used their regular model material for 4 years, in addition to their gingiva, night guard, surgical guide and try in material, on the envision one we're locked to only their materials, do you have any issues with implant models warping around the cutout for the gingival mask?
@kairon156
@kairon156 Жыл бұрын
Awesome content as always. I love the bits of humour you throw in as you explain the complex yet fascinating tech.
@rustedfriend
@rustedfriend Жыл бұрын
This was an awesome explanation. I understood at least the basics of dlp but I didn't know how that all interacted with resin printing. Looks like I'm going to have to look at upgrading out of my lcd printer.
@leesmithsworkshop
@leesmithsworkshop Жыл бұрын
This is how you do a sponsor video, well done.
@craned
@craned Жыл бұрын
Correction: 6,999 more patrons to get that scanning electron microscope.
@danielsmeyer
@danielsmeyer Жыл бұрын
Great episode. The in depth on the tech was sick.
@stevepettenon1
@stevepettenon1 Жыл бұрын
One of my favourite videos!!! Love how well you explained everything in such an entertaining way. More please!!
@DemsW
@DemsW Жыл бұрын
Here is a comment to persuade to do more stuff like this, this video was really good. It would be nice if it was accompagnied by a project that benefits from said technology
@JohnJones-oy3md
@JohnJones-oy3md Жыл бұрын
That print quality is amazing. But I don't expect to see much more innovation in the hobby DLP resin printers anytime soon, aside from dropping prices. Like the MSLA printers, Anycubic and the others are largely locked into off-the-shelf repurposed screens/DLP projectors left over from other industries.
@glodigit
@glodigit Жыл бұрын
Understandable. I have a bit of a feeling that Teaching Tech's opinion that innovation trickles from hobbyists to manufacturers in FDM 3D printers also applies to SLA printers targetted at hobbyists, and after over a month of researching for my L^3 (liquid laminate lithography) printer, it seems that there's only a fraction of hobbyists diy-ing resin printer designs compared to FDM.
@titoepfx4272
@titoepfx4272 Жыл бұрын
why cant they just manafacture it for a acheaper price and then be able to sell it for a cheaper price making more sales
@steverushforth7009
@steverushforth7009 Жыл бұрын
Absolutely brilliant. it brought back a memory from many years ago, a school physics project making an LCD display, stannous chloride was heated and blown over the glass to make it conductive, if I remember correctly it was published in a practical electronics mag.
@Artisflowing
@Artisflowing Жыл бұрын
Thanks for a deep dive into what I refer to as MEMS (MicroElectroMechanical Systems)! Will add more after I watch :)
@Scyth3934
@Scyth3934 Жыл бұрын
NEW VIDEO LETS GO
@DragonsAndDragons777
@DragonsAndDragons777 Жыл бұрын
Microscopic gears a r e e p i c
@aidenkauffman9082
@aidenkauffman9082 Жыл бұрын
I would never understand this without this video thanks so much zach. post more shtuff like this please. nothing but love dude.
@mrsoullssnss8954
@mrsoullssnss8954 Жыл бұрын
1st video I've seen of you and about these printers. Don't have any myself but boy are they and you infinitely entertaining!
@UnaKarlsen
@UnaKarlsen Жыл бұрын
I remember the colour wheel DLP projectors. They annoyed the hell out of me since every time my eyes would move the slightest amount I would see the colour smear. Screen flicker was a big issue for me back in the CRT days so I was really happy when I managed to get a cry capable of over 100hz refresh rate so I couldn't see the flicker any more.
@RAndrewNeal
@RAndrewNeal Жыл бұрын
You could see the flicker of a CRT? The ~15kHz noise they emit is what gets me. Almost headache inducing.
@galfisk
@galfisk Жыл бұрын
I'm glad that my eyes were happy with 85 Hz in the CRT days. Never could abide 75 Hz or lower though. It felt like tiny hammers beating my eyeballs. Color wheel DLP projectors are still widely used, but they swap the colors faster nowadays. The schools I work for have loads of them. I actually have an old beast for my home theater, the venerable Infocus X10, now on its second lamp. I can see the rainbow if I really try, but it doesn't bother me in practice.
@Diesr
@Diesr Жыл бұрын
zack: has stroke meanwhile zack: this is digital light processing 'a matrix made of milions of miniature mirrors and motors that measure mere micrometers' also zack: ergebleds zack but further into the video: im gonna trample on their trademark and use dlp and dmd interchangeably insult: you know we are talking about the technology here not a specific brand and if you're dlp you can dmdeal with it zack has stroke: 2:28 to 3:15 spitting fax : 5:38 to 5:44 exercise for viewer: 5:44 to 5:58 back in my day: 7:03 to 7:10 robot ninja treasure hunting hacker fairy who gets to choose between poaching endangered species from a hoverboard and using endangered species as a hoverboard: 7:52 to 8:10 zack doesnt know what hes promoting anymore: 8:10 but suppose instead of a piddily little led panel your light source is a 5 killowatt xenon arc lamp designed to fill a 15 meter schreen with lazy super hero tropes from across the theater thats enough power to make celloid film litteraly explode if the film reel jams for half a seccond 8:11 to 8:28 and its certanly enough to incinerate any lcd you put in front of it 8:29 to 8:32 hmmm with mallicious intent 8:42 to 8:43 zack insults your mancave 8:48 to 8:54 daylight scenes can pummel your retinas night time scenes are so inky black you cant tell where the screen ends and because every pixel shifts at the same time action shots have this snappy frame to frame clarity that evokes a physical cinematic crispness 8:54 to 9:10 what is that word 9:10 to 9:11 (dammn last nuber sus) back before this was you know ''affordable'' projectors spun a color (ergobled) wheel in front of a lamp and just displayed and just displayed each frame one coulor at a time for most people persistance of vision would sort it out unless you where someone like yours truly who could see the individual flickering coulors and it was highly irritating 9:16 to 9:33 LEAVE A LIKE ON THIS VIDEO AND COMMENT if you too remember the obnoxious (ergobled) rainbow projector effect 9:33 to 9:37 (this is a pain in the ass to type but im a hardcore ergobled fan) so i know im not the only old person on youtube (famous last words) 9:33 to 9:42 the picture would just be invisible if 95% of the light was gobbled up by lcds 9:56 to 10:06 rock hard what? (rock eyebrow raise) 10:29 to 10:35 lesson one in how to ruin a joke 101 10:35 to 10:40 zack strokeman (dont sexualize) 10:45 to 10:52 sponsorship ergobleds10:30 to 12:22 holy quingledingledingle im done
@brodriguez11000
@brodriguez11000 Жыл бұрын
'a matrix made of millions of miniature mirrors and motors that measure mere micrometers' Say that three times fast.
@michaelvereker4681
@michaelvereker4681 Жыл бұрын
That was an amazing explanation! Would love more stuff like this!
@Vancha112
@Vancha112 Жыл бұрын
Great video ^^ very fun to watch and informative
@whyhellothere2008
@whyhellothere2008 Жыл бұрын
Ergebleds
@ponysmallhorse
@ponysmallhorse 10 ай бұрын
Amazing content. I forgot how long ago I enjoyed something on this platform so much.
@bout2partyhard
@bout2partyhard Жыл бұрын
Hey, this was my first visit to the channel! I have to tell you, this was truly captivating and fascinating as well as thorough enough to satisfy my curiosity. Subscribed and can't wait to explore the channel and more like these in the future!
@willholmes545
@willholmes545 Жыл бұрын
Great video and demo of how the mirrors move, I'd love to see more like this!
@yendanjin
@yendanjin Жыл бұрын
am new here, watched like 5-10 of your videos. you combine nearly every aspect of things I love, the fact that warframe is somehow one of those things is incredible to me and I would have never guessed.
@avejst
@avejst Жыл бұрын
Great video as always 👍 Thanks for sharing your expirence with all of us 👍 😀
@maxillariadendrobulum4079
@maxillariadendrobulum4079 Жыл бұрын
This was such a cool video! Thanks for explaining how DLP chips work. You made it easy to understand. ❤️
@Aldianaux
@Aldianaux Жыл бұрын
I'd absolutely love more of these types of videos!
@SpaceGringos3D
@SpaceGringos3D Жыл бұрын
Small episode, big info. Thank you again for this awesome content!
@dr.dr3dd0ng46
@dr.dr3dd0ng46 Жыл бұрын
This video was fantastic, so much information and told in a way that makes you smile in amazement. Definitely something to share to blow other minds.
@devinclose1600
@devinclose1600 Жыл бұрын
Really cool, thanks for sharing this!
@mahmga1
@mahmga1 Жыл бұрын
This was a great find man, good talk & smart dialogue
@Timberwolfee
@Timberwolfee Жыл бұрын
First video I've seen and this was amazing. I work at a company that manufactures AV equipment, I do more support rather than development but I do have a good understanding of this stuff, but this video helped me far beyond just my hobbies. You are great, please keep it up, and feel free to branch out. I'd watch you talk about anything.
@FirstName-nf4fx
@FirstName-nf4fx 8 ай бұрын
I love your channel. Thanks for everything you make !
@-------6138
@-------6138 Жыл бұрын
Thank you so much for this in depth video into a such interesting topic
@WTF.CHANNEL
@WTF.CHANNEL Жыл бұрын
Excellent video mate! Keep it up
@brainstroem1
@brainstroem1 Жыл бұрын
you are really good with the words and the explaining at the same time :D
@br6768
@br6768 Жыл бұрын
This is a great channel. Glad to come across it.
@mrartistimo1530
@mrartistimo1530 Жыл бұрын
Beautiful video explaining the difference in technologies, and introducing me to this beautiful innovation for resign printing. And like that I’ve found the point where I want to finally, finally jump into resin printing. Over 2 years of just straight printing before the sensor is expected to fail? Perfection. Plus with details being that crisp, there’s truly nothing of equivalence to me.
@pdk005
@pdk005 Жыл бұрын
Ten seconds in, Zack hits us with killer tech alliteration. *Thumbs Up*. And the rest of the video was good too.👍👍
@kfbest
@kfbest Жыл бұрын
please more like this. I loved the educational aspect as taught and alliterated by Mr. Freedman.
@shannonm3841
@shannonm3841 Жыл бұрын
Just wanted to say that I appreciate all the work you do writing these episodes , I love all the nerdy Easter eggs sprinkled throughout , they remind me of the old Dennis Miller monologues except I’m actually interested in what you are saying .
@CameronKalegi
@CameronKalegi Жыл бұрын
This was such a welcome departure! I would love for you to explore / explain more "underlying tech".
@stuffandymakes1648
@stuffandymakes1648 Жыл бұрын
Love your little comedic comments peppered in your content, man! Funny stuff! Informational, entertaining… Kinda like infotainment! Keep it up!
@Dartheomus
@Dartheomus Жыл бұрын
I don't know why I never looked deeper into DLP tech. That was fascinating. Thank you for creating this amazing video!!!! :)
@SuperMakeSomething
@SuperMakeSomething Жыл бұрын
Great video and explanation of the technology Zack! DLP is truly an amazing technology. Hopefully this will be the new standard that replaces LCD-based printers.
@barhamitzvah
@barhamitzvah Жыл бұрын
Amazingly explained video!
@jordananderson1594
@jordananderson1594 Жыл бұрын
Great video, it was very informative. Thanks Zack!
@demitrius5089
@demitrius5089 Жыл бұрын
this is a REALLY awesome video! thank you so much for such a perfect explanation.
@nilsharpy4652
@nilsharpy4652 Жыл бұрын
This was awesome. Keep up the good work!!! would love to hear about more weird and wonderful technology.
@dabruuzer
@dabruuzer Жыл бұрын
Seems like a dream printer. Out of my budget at this point, but man would I love one. Great video, really enjoyed the explanation of how DLP works.
@Curiouz_Creator
@Curiouz_Creator Жыл бұрын
Because of you Zack, I have subbed, and now own a 3d printer. LOVE YOUR CHANNEL BROSKI!
@theencore398
@theencore398 Жыл бұрын
I like this mans enthusiasm, gives me a strangely warmly and happy feeling about science and stuff.
@skoneal007
@skoneal007 Жыл бұрын
My very first HD TV had this technology way back in the day and it had an awesome picture. Had no idea they were still using this technology today.
@grinreaperoftrolls7528
@grinreaperoftrolls7528 Жыл бұрын
I will ALWAYS get excited by technology. This is AMAZING! Thank you for the great video
@chiparooo
@chiparooo Жыл бұрын
Very interesting! Thanks for sharing!
@blazedsoldier
@blazedsoldier Жыл бұрын
Absolutely love your run down of the tech brother.
@3DHP
@3DHP Жыл бұрын
Great video Zack,I have learned a lot,keep up the great work.
@Agamemnon2
@Agamemnon2 Жыл бұрын
Thanks for this condensed infocast. I've never felt satisfied with the idea of resin printers that burn through consumable LCD screens, just on an emotional level. It's fascinating that there's this potential massive advancement waiting in the wings, biding its time.
@itsmki
@itsmki Жыл бұрын
This was a truly great video. I'm not really interested in 3D printing, but your explanations were really good and I'm a lot more interested in this technology now.
@FnjordKnot
@FnjordKnot Жыл бұрын
This is the most informative entertainment and entertaining infotainment i've ever seen. GG
@rpkamins
@rpkamins Жыл бұрын
Absolutely love your style... Definite subb!
@paulhuffaker5351
@paulhuffaker5351 Жыл бұрын
Incredible!! This video was a huge help for me. Also, big thanks to Anycubic for making a DLP at this price!
@lunarz7117
@lunarz7117 Жыл бұрын
Honestly I liked this video for not only showing the technology but also explaining it and the opposing technologies too! I always wondered why LCD screens get hot, VR headsets I'm looking at you!
@nathnich
@nathnich Жыл бұрын
I had a DLP projector in the early 2000s. For the first couple of months I never saw the rainbow effect from it. Then one day I started seeing it, and I could never stop seeing it. Also, i had a MEMS class in college circa 2003. We had a guest speaker from TI come in to discuss their brand new DLP chip and pass one around. It's just as amazing now as it was then.
@SnowyYukiThe2nd
@SnowyYukiThe2nd Жыл бұрын
That video was awesome, I'd love to see more educational stuff if it's like this
@cptstbd
@cptstbd Жыл бұрын
this has been my second favorite research dive you reminded me of, right after teensy teensy teensy teensy
@timcameron9023
@timcameron9023 Жыл бұрын
My son and I very much enjoy your videos. I have been doing graphics work for years with an Australian company that makes high end DLP-based machines for dentistry and jewellery industries, and only very recently, I finally - FINALLY understood how utterly bonkers DLP technology is. Texas Instruments are incredible for realising this technology. I'll be upgrading my Anycubic mono fer sure!
@Amhiel
@Amhiel Жыл бұрын
Setting asside this amazing tech for a second: I love the amount of Warframe love in this video :D
@chrismofer
@chrismofer Жыл бұрын
9:30 absolutely, it was most apparent when darting your eyes around. in my elementary school they used overhead projectors a lot, and replaced them with color wheel multimedia projectors which every teacher had for the rest of my school career.
@djjoeray
@djjoeray Жыл бұрын
Your video on DLP and this release from Anycubic is probably going to get me to take the plunge on resin printing - awesome tech!
@youtoobe556
@youtoobe556 Жыл бұрын
I found myself clapping in pure awe and astonishment when you were explaining the mechanism of DLP. It's truly wild how far we've come as a species.
10 Insane 3D-Printed Wearables - The Best Won a $1,500 Printer
19:30
Zack Freedman
Рет қаралды 221 М.
RGB Ruined My Life: MiRage Mechanical Keyboard Mk2
19:43
Zack Freedman
Рет қаралды 221 М.
Неприятная Встреча На Мосту - Полярная звезда #shorts
00:59
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
The joker's house has been invaded by a pseudo-human#joker #shorts
00:39
Untitled Joker
Рет қаралды 13 МЛН
Каха ограбил банк
01:00
К-Media
Рет қаралды 10 МЛН
Anycubic Photon D2 DLP 3d resin printer [HONEST REVIEW]
16:01
The Worst Wearable Computer
18:45
Zack Freedman
Рет қаралды 302 М.
I made custom 3D printing filament with my Logo inside!
18:16
CNC Kitchen
Рет қаралды 560 М.
Hacking Dystopia with a Pi 400 Cyberdeck
12:38
Zack Freedman
Рет қаралды 532 М.
My 3D Printer Collection is Getting Ridiculous
17:44
Zack Freedman
Рет қаралды 293 М.
Why I Trashed a Perfectly Good Wearable Computer | Optigon 2: Part 3
20:53
Resin Manufacturers have been LYING to you
25:33
Once in a Six Side
Рет қаралды 97 М.
How To Unlock Your iphone With Your Voice
0:34
요루퐁 yorupong
Рет қаралды 28 МЛН
Собери ПК и Получи 10,000₽
1:00
build monsters
Рет қаралды 1,7 МЛН