FOXBODIES WERE MADE FOR THIS LOOK!

WANT BREW2L DECALS? www.shopbrew2l...
LINK TO SHIRTS: / @brew2lfoxbody
#DRAGRADIALS #FOXBODY #STICKY
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.t...
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.c....

[@chadkinsler9865]

Great looking Foxbody 🔥🔥🔥🔥

[@BREW2LFOXBODY]

Thanks bud!

[@jennymann3704]

Like it too looking great 👍

[@garyvanhoosier2472]

Dam that car keeps getting better and better with every new video!! Awesome man !!!🤘👍💪😎

[@BREW2LFOXBODY]

Thanks bro

[@garyvanhoosier2472]

@@BREW2LFOXBODY your welcome , I admire the hard work and dedication also. Keep up all the outstanding content man !! It's appreciated by all of us !! 💪🤘👍

[@davidmcbride6673]

Looks good!!

[@TheModAddict]

You have knocked it out of the park with all your builds..but Carbon fox speaks my language. My new favorite thats for sure.

[@BREW2LFOXBODY]

Thanks bro! It’s probably my favorite car as well. It’s so easy to drive and enjoy

[@bama_5.051]

Damn them wheels look great with that color u should have put a couple of black Mark's in Andrews drive way LMAO. 😂😂😂

[@BREW2LFOXBODY]

Andrew said he saw you today on 84. Said the car was looking good 👍

[@bama_5.051]

@@BREW2LFOXBODY cool ..was I broke down LMAO I was making my first long run.

[@BREW2LFOXBODY]

🤣✊

[@89gt5.0]

All the wheel look good but I think the black wheels look the best 👍

[@hotrodray6802]

HE likes em.👍👍😎

[@JDWorkshop-wn9tt]

Looks killer! Does sound mean too!

[@BREW2LFOXBODY]

Thanks

[@gordonthejoker]

Looks awesome

[@baconcreek609]

Those wheels on that color car look perfect. It looks serious.

[@BREW2LFOXBODY]

🙌

[@FirstCastMedia]

I've missed a few vids... The red bay is POPPIN! Do work bro! Lovin' it!

[@BREW2LFOXBODY]

Appreciate it 😎

[@j8054-z8u]

Looks Awesome 😎 👍

[@BIGDMEDIA]

Good Video Man!! The Car Looks Good!!

[@BREW2LFOXBODY]

Appreciate ya

[@STXDrIvEr98544]

Haha went tearin ass by Andrews house, man she looks money on those wheels I love it!

[@BREW2LFOXBODY]

Lol always

[@gregoryjowers3629]

You need to adjust the tv cable use a 1/8 pipe thread in the port on the right side or you can wing it and watch the cable to make sure it doesn’t slip back when you unlock the tab on the plastic with the spring make a fork about 1/4 thick I think can’t remember or buy the tool to help adjusting the tv cable pressure then the transmission will last for a while

[@hotrodray6802]

I adjust by reading the oil pressure on the trans. You can adjust by how/when it shifts.

[@gregoryjowers3629]

@@hotrodray6802 I’ve done it both ways the last time i used a gauge and 34lb @ idle hot

[@BREW2LFOXBODY]

I adjust by starting high and easing down on the pressure by feel.

[@myeighty-nine7813]

Its so nice man!

[@dangerranger3297]

car looks badass with those wheels on it mang

[@BREW2LFOXBODY]

Thanks 🙏

[@khalilshuwaikhat9944]

Its a PC of art that will sure get your attention when you see it Whatever you put

[@BREW2LFOXBODY]

😎😊

[@tadvandyke1032]

that's beautiful. exactly what I invision for mine

[@andyak4321]

I’m in south alabama too I’m starting my project fox building a 5.8 Love what you do

[@BREW2LFOXBODY]

Thanks bro! And good luck on your build

[@andyak4321]

Can you make a video of eliminating egr position sensor

[@93stang19]

Looks sick !!!!

[@20b3rotordream]

Thinking I’m going to buy those wheels for my Capri

[@BREW2LFOXBODY]

Great wheels imo 👌

[@20b3rotordream]

@@BREW2LFOXBODY they look good. Also the only 4 lug 15x10 you can find that’s not a Holshot and $600+ a wheel. I want to keep my car 4 lug. I went 5 lug a couple years ago on race stars but went back with the retro Draglites look. Can’t find them/order them in 15x10’s anymore.

[@billpace3489]

Badazz bro

[@BREW2LFOXBODY]

Thanks bro

[@stephenroberts7816]

Wow I thought I liked the other wheels but those are wicked with that color. I have never been an AOD guy but that shifts nice.

[@BREW2LFOXBODY]

Thanks 😊

[@wickedfoxbodys1044]

The whole car looks Wicked Pissah.

[@BREW2LFOXBODY]

🔥😎

[@stang3028]

That car is super nice bro

[@BREW2LFOXBODY]

Thanks brother

[@Ttop_Thomas]

Maybe its the red interior, maybe its the tribute, maybe its the color, but it is becoming my favorite car in your collection 😉

[@BREW2LFOXBODY]

Thanks, I think it’s a little of all of it for me as well. 🙏

[@paulhudgins5120]

Man Brew2l, does that engine & engine bay look so sweet. She is so stout for being n.a., are you sure your not hiding a supercharger somewhere. Yeah i like the wheel change, but i do perfer the one you took off better though, but they do look good as well. Great job bud.

[@BREW2LFOXBODY]

Thanks brother. I just wanted to run the drag radials so we could test it out.

[@georgiaboy1579]

Looks and sounds great

[@turbinatorlou]

Definitely looks good

[@colinwatson3654]

I love these wheels on this car!

[@robdaslav]

When are you going to do a rear disc conversion video? Those drums gotta go!!

[@BREW2LFOXBODY]

Normally I would disagree with you. But having an auto with a stall it really does needs better brakes.

[@BigDaddyStev-O]

it's not that I didn't think i would like this car or anything, but i really like this car. i think for me it's because of the color, I like a darker color on a foxbody.

[@BREW2LFOXBODY]

Thanks brother

[@FORDMAT77]

That stance though 😍, I may or may not copy this whole look in the future, LOL.

[@ogsuperflygarage]

Brother!! From the ground up and front to back…The Carbon Fox is a definite…SHOW STOPPER!! 💯👊🏾

[@VictorSanchez-kp9nt]

That is a great looking car keep doing what you do and thanks for sharing.

[@BREW2LFOXBODY]

Thanks for watching

[@panini8711]

i purchased a foxbody nearly the same color as this 130k miles, clean title and stick. very fun car to drive, just needs some power haha Great videos!

[@VidTubeWatch]

She's lookin mean. Nice pulls there in Mexico. LOL. Riding around on "empty" in classic Brew2L style.

[@BREW2LFOXBODY]

“That’s just the meter broke” 🤣 (Project Pat)

[@VidTubeWatch]

@@BREW2LFOXBODY I figured as much, and then right after I typed that I saw that the gauges weren't accurate.

[@BREW2LFOXBODY]

Don’t worry I quoted you in my next video. 🤣👌

[@VidTubeWatch]

@@BREW2LFOXBODY Any time. I look forward to that. LOL

[@timothyeldred7622]

Looks awesome !!!! Great job with everything

[@hotrodgeorge2352]

Man I absolutely love what you’ve done to this 🦊 nice job 👍🏻👊🏻

[@BREW2LFOXBODY]

Thanks bud ✊

[@edgetwins529]

Damn Brew! Just when I think I can't be more like impressed with the Carbon Fox. That is one clean-ass engine bay. Not gonna lie, I was apprehensive to say I liked the new wheels, but it just took a minute. Good eye, and well done, my friend. On a side note, I discovered the AOD shuffle by complete accident while driving my buddies 89 Saleen back in the day. We both looked at each other and said "Whuuuuut?"

[@hotrodray6802]

🔔😎 Preeeeetty sure we been doing it since the 50s. 😁😁😁 'Course youz youngens ain't spected ta know dat treek.😆

[@BREW2LFOXBODY]

Thanks edge!

[@edgetwins529]

@@hotrodray6802 True stuff. I had only ever driven my own, and a few friends Foxbodys, which coincidentally were all T-5. We lived in a small town with no racing community, that we were aware of...and the veteran rodders that did live here didn't care much for us. Wasn't until I moved 3 hours away that I started to learn me some good car stuff.

[@ponypwr]

Looking good, might not spin a wheel... but we wont talk about that lol! Ok Saleens are back on guys.... lol.

[@BREW2LFOXBODY]

🤣

[@VansenJenessa]

CANADIAN SUPERMAN APPROVES

[@BREW2LFOXBODY]

Thanks 🍁

[@FirstCastMedia]

P.S. Ride along videos bring folks like me back to owning one! Good stuff!

[@BREW2LFOXBODY]

I’m hearing more of that. Maybe we’ll keep it up 👍

[@danvolker13]

🔥🔥

[@jas3118325]

Giddy up!

[@floydmarseeii4007]

Wow 😮!! I just thought it looked great before. I’m loving the new wheels on it!

[@BREW2LFOXBODY]

✊

[@johnphillips2460]

Absolutely sick car, and keep the ride alongs going!! Fox bodies were my favorite cars back in the 80s!! I would love to own one now!!! GREAT content!!!

[@BREW2LFOXBODY]

Will do brother!

[@W1ck3d86]

Love that set up, great stance and the wheels are killer!

[@BREW2LFOXBODY]

Thanks bro

[@hotrodray6802]

🔔😎 👍👍👍😎

[@robertcampbell1307]

Who says that there aren’t a lot of 4-lug wheel options for the Fox Body Mustang! 🦊

[@BREW2LFOXBODY]

✊

[@hallz9117]

Just did my struts, BLASTER penetrating fluid works great. Removing the rotors will give you room ya need 👍

[@DUNEATV]

After it shifts be sure to pull it back down! AOD life.

[@BREW2LFOXBODY]

🙌😎

[@mikegay8511]

The car is overall amazing. Sell me the car? Lol! I got a feeling, that joker can do 8 in the 1/8. I'll give it that with the new engine.

[@BREW2LFOXBODY]

I was hoping for a mid to low 8 but I was disappointed yesterday. But it’s still got the stock throttle body on it so I’m hoping that’ll help some.

[@therealfoxbodyaddicts]

I wish my second gear lasted as long as yours. I can’t figure out why mine wants to short shift right through second..

[@BREW2LFOXBODY]

The AOD shuffle should hold second gear. Have you tried that?

[@therealfoxbodyaddicts]

@@BREW2LFOXBODY I have but I’d rather not lol I use the one, two shuffle while doing “spirited driving” but I wish it held that gear a bit longer while just cruising.

[@slowbra94]

I've had that bolt problem a few times. When i can't get it since I'm working on the ground sit it on stands put your breaker on it and slide a hydraulic jack up under there and give it a few pumps. Itll break loose. I've had to do that on wheel bolts on alot of early 2000s import vehicles

[@BREW2LFOXBODY]

👌😎

[@kb01663]

It's crazy how that car looked like a heap a month ago

[@BREW2LFOXBODY]

Thanks 🙏

[@Bigratman-gx7xh]

Looks good bit I think I like the Saleen's a little better

[@thefoxchamber]

Yea, you know we was looking at dem gauges, lol

[@BREW2LFOXBODY]

I know you were… 🤣👀

[@thefoxchamber]

@@BREW2LFOXBODY 😆

[@pimpovic2]

People hate the Xpipe until they get an Xpipe. They sound great to my ears!

[@hotrodray6802]

All 8 cylinders down each pipe. 👍

[@johndoe-zb8bm]

The wheels look outstanding with the color combo.The car seems to very crisp to me my man,sounds healthy!👈💯

[@BREW2LFOXBODY]

Thanks bro 😎

[@FirstnameLastname-pe5ib]

One of the healthiest 5.0's i've heard in a while.

[@BREW2LFOXBODY]

🙌

[@easycomeeasygo8901]

Cant believe that doesnt rub, wow. That car at least from my phone screen looks in super nice condition 👍

[@hotrodray6802]

Fresh paint and interior

[@billpace3489]

Heat works

[@TS-jp1lm]

Car is looking great and sounding amazing. The black wheels pop with the gray exterior. Honestly, a great combo. Are you going to roll out the fenders in the future for bigger tires?

[@BREW2LFOXBODY]

Thanks 🙏 I’m going to leave the fenders like they are.

[@TS-jp1lm]

@@BREW2LFOXBODY glad your leaving it that way. It looks awesome as it is.

[@boss302nard]

She’s looking good! I’m really thinking of picking up a set of those wheels. Are you still running a promo code with LMR?

[@jpat99]

AOD Shuffle? Is that the 1, upshift, and then pull back down in 1?

[@BREW2LFOXBODY]

Yep 👍

[@smallfry0764]

God damn that car is sexy.

[@BREW2LFOXBODY]

🤝

[@michaelyost6219]

I think the other wheels look alot better on your mustang

[@BREW2LFOXBODY]

😎 I agree. But these have their purpose as well.

[@lamarrichardson1782]

Loving that car all the way around 👍

[@jimmyjamesgarage3290]

On camera the wheels look black. I imagine the camera can't pick up the color and make it look as good as it would in person. I really like the saleen wheels on the Carbon. The drag pack tires look badass tho. Definitely great fitment/stance.

[@BREW2LFOXBODY]

They definitely aren’t my favorite wheel but I do like them more than I thought I would

[@samcombs8456]

MEATY!!! Now i really wanna know what this AOD shuffle is. I haven't driven mine recently, I got a stocking rear drum brake on the passenger side along with a new gas tank that needs to be put in.

[@williamsantiago826]

Yessir

[@VacFink]

I can appreciate why people might like this look, but I'm more of a street look guy. That dark color also gets better with more contrast. I will admit if I had several pairs of shoes I might try them all out. Looking forward to when you try the 93 cobra's out on this one.

[@BREW2LFOXBODY]

That is going to look pretty good as well I think 🤔

[@smtbigelow]

Exactly!

[@midnight347]

Its not so much a "street" or "drag" setup like it has to be one or the other. What I'm getting at is this is a "performance" setup. You can hook alot better with these kind of setups and hooking good isn't only for the drag strip (at least it shouldn't be lol). If you have a mildly modded na 302 you may not need big traction but alot of people are running 400-500 wheel and up on these cars and newer cars. Cars making power need a setup like this even on the street. I like being able to hook all the power on my bolt on 550 rwhp 07 gt500 even with 410s. Street 20s just ain't gonna get it done lol.

[@midnight347]

But other than my previous point I actually think it looks killer long as you have a matching front and rear set. What i don't like is when guys run around with drag setups on the rear and a street going larger wheel on the front that has a completely different style and/or color. That seems to be a trendy thing going on I'm not that fond of. I prefer matching front runners. They don't necessarily have to be skinnies I run 17x7 f14 on the front of my 07 gt500 with 15x10 on the rear and it looks dope imo. Get alot of compliments on the gunmetal f14 drag pack.

[@smtbigelow]

@@midnight347 That is a drag setup. You don’t run skinnies on the front at a road course or auto cross.

[@Gyaradosite]

Is that Anderson power pipe designed to compensate for hot turbulent air? Serious question.

[@hotrodray6802]

I'll say no. 😳

[@BREW2LFOXBODY]

Yea it just sucks hot air honestly

[@sz2950]

How did your lower intake runners line up to the cylinder head intake ports? Reason I ask is I have the same Canfield head less the milling .040 you say yours have. My Holley lower does not line up with raised intake runners. However, I’m considering milling them since the motor is currently apart

[@BREW2LFOXBODY]

They actually line up great. I was amazed by it actually

[@allancooper3865]

I really like that you run different wheels and tires for different applications , as in I like the other wheels for the looks and cruising around , but the wheels you just put on the carbon fox 🦊 are for the more serious spirited drags 😈 i mean spirited drives 😇

[@BREW2LFOXBODY]

Exactly 👌

[@out_foxed_gt]

Those wheels look great on the car what a difference!!

[@dzolalaw]

What brand and size tires do you have mounted to those wheels? Looks great. I’m looking for wheels n tires.

[@smtbigelow]

I like the other wheels better, Ive never liked the big and littles look.

[@BREW2LFOXBODY]

👀😎

[@smtbigelow]

@@BREW2LFOXBODY But as they say…. Opinions are like assholes… everyone has one!

[@terrencejwatkins2309]

I’m not real big on “drag packs” but black wheels like the 93 Cobra wheels on that color would be bad ass

[@shanesilago9136]

What size rear tires look awesome

[@davidd6003]

What color code is that gray bro?

[@hotrodray6802]

Aftermarket. On paint video.

[@BREW2LFOXBODY]

☝️carbonized grey

[@DonLapwig]

Temp gauge during the drive?

[@hotrodray6802]

He said all the gauges are way off. Other video says reads half way when off.

[@BREW2LFOXBODY]

Thanks Ray 👌

[@millz1012]

Damn carbon fox looks and runs good

[@carlhart9317]

what kind of shocks did you use

[@BREW2LFOXBODY]

Cheap KYB

[@paulnichols4957]

Do you need a throttle body? I have a BBK 70 m.m. with egr? If you want it just let me know I had no problems just went to 75 getting ready for forced induction. Needs to be cleaned up

[@BREW2LFOXBODY]

Thanks Paul but I have one on order it’s just not here yet.

[@GreyontheBeach]

You should truly let me show you how to set a Fox chassis up.

[@Mustanggt-jh6dl]

Don’t like the drag pack on that car. the car is bad ass👍very nice

[@Fishbowl5.0]

Beautiful work! Have you ever considered a manual valve body aod? My dad has a built 363 87' Thunderbird ( long Foxbody) with a manual valve body AOD that looks like a hand full to drive.

[@BREW2LFOXBODY]

We have a built transmission coming soon.

[@JJ-Fox]

What spacer for the rear was used ?

[@BREW2LFOXBODY]

5/16

[@jerrybaudin5482]

No man

[@BREW2LFOXBODY]

Yes man 😎

[@joe5.097]

Let see some 1/4 mile times

[@chrisdavis9920]

Is the speedo way off or is it just me

[@jerrybaudin5482]

Nah man, go back