Woodturning a Platter with Thick Inlays

[@onurson4000]

that stop motion was insane

[@calvin4875]

No joke..thats dedication to quality content and viewer understanding right there

[@---l---]

The amount of work for a 10 second shot. Incredible.

[@rayleder3705]

Frank is the Steven Spielberg of filming woodworking!

[@andrewmullen4003]

Your animation and stop motion film making is now almost on par with your wood working skill, which is outstanding, lovely bowl Frank.

[@st.f4530]

Your perseverance and patience are incredible! Nothing seems to frustrate you so much that you throw everything in the corner and give up! My respect!

[@Docstantinople]

Man you are a wood worker, cad design specialist, cnc operator, stop motion prodigy and Moby lookalike. You are awesome Frankie! 😅

[@johnritchie3889]

Frank - I love the stop motion and animation in this video. Great job letting us see what’s going on inside the piece.

[@ThompsonsWorkshop]

It's a good start to the day when Frank posts a video. Keep them coming!

[@edwardabel3716]

Frank, I appreciate your thought process and you sharing your “mistakes” as a learning experience. You thoroughly investigate your errors and show your audience your lessons learned. I am an Engineer so I am often analyzing my actions.

[@glass1258]

Frank you’re a genius

[@linkinprk1981]

Every time I want to do an inlay i have to go back to a video i watched that very clearly laid it all out for me - it wasn't nearly as complicated or hacky as yours, but maybe I wasn't doing as deep of an inlay that it mattered? This is the tutorial i have bookmarked as a refresher each time -- The VCarve Inlay Technique by Shawn Gano

[@dirktermagant5629]

Love watching a master of their craft problem-solve their way to learning a new skill.

[@jimmyrk3]

If the software has a user group, you might find the procedure you used was the way to do it... Great tray.👍

[@reginalawson3438]

Well that wasn't a video, but a Show!! Its truly a labor of love. Beautiful Platter!!

[@wouldntyaliktono]

That stop-motion of the cross section of the test piece was amazing. Reminds me of the "WoodSwimmer" video.

[@sapelesteve]

Fantastic work as usual Frank! That bowl really turned out looking great! 👍👍

[@austinsand8163]

I loved the real life section view sweep on the first failed attempt.

[@harrisric128]

You saying, " you didn't think far enough ahead" makes me feel like I'm just winging it with every project. Great work🤙🏾

[@billysmether6237]

Gave up on clamps long ago. I just screw the work to the machine bed. Easy and quick. No obstacles. Inlays are about the bits and the depths. You should make a wood "press" to glue the inlays (like a sandwich). That will help the inlay to go down nice and straight. Nice work on a pretty sophisticated project. Thanks for video!!!

[@michaellinahan7740]

Frank, making a 2 hour job last a month is called retirement! It is those problem solving situations that makes the grey matter work and keeps the interest up. I have been adding 'features' to my drill press (motorised up/down table, automatic lock/unlock and air or lubrication blast inspired by Marius Hornburger) for the last 2 months as I wait for parts or change the arduino code to get it working as it should.

[@hitnorcal]

i have really enjoyed watching the production value of these videos increase over time. they're just fun to watch.

[@scotter_dotter]

Frank just took it to another level, Again.

[@1johnnycentral]

My god frank, you make everyone on KZbin, woodworkers film making look like amateurs. Amazing work as always. Love your videos, and cant get enough of watching them, i always end up going back to your older videos and watch them again for the 10th time

[@tomasjosefvela1]

Mr. Howarth , you are my hero! thanks for sharing.

[@justindesilets3526]

in the future, no need to have a symmetrical shape, you just need to mirror the inlay and use this mirrored shape to program the cnc. when you actually "rotate" the part to glue it in, it's kinda mirroring it again so it fits perfectly!

[@robertcotrell9810]

The production quality is always a joy to witness!

[@markhagen7777]

It’s always fun to see where your whimsy takes you

[@ludwigetc]

Always love the 3D overlays! And the bowl turned out so beautiful 💗

[@provostkhot]

I honestly don't, they are annoying and obscure Frank's great craftsmanship.

[@andrewoatman6745]

Im glad that you figured out the issue and impressed and pleased that you kept plugging away at it until you had something. Weaker willed folks might have given up. I also enjoyed the recurring theme of tossing the work piece onto a surface and letting the autoclamps do the rest. Ive been watching you for 7 years and its still fresh and new yet familiar and comforting. Keep up the good work.

[@avaDesdemona]

When pushing the plugs in place you're trying to compress air and glue (you have a pretty tight fit of your pieces, the glue is a good sealant for trapping the air) so a tiny hole somewhere in your plug or your main pieces might help with clamping, because then the air can escape.

[@samhklm]

Love the bowl. Can you do a second one on the CNC. Just to see how it would turn out.

[@theodoranorton4779]

So great that you were able to get on top of the bit-radius factor which has been such a strong snag in your design process. The result is exquisite.

[@Via-Regia]

This is a beautiful piece of art….😮

[@williamshs313]

It’s fascinating to watch how you work through the issues. Thanks for sharing all the thought process..

[@ShouldersMoondog549]

Now that is a really nice platter!! love the inlay of maple! Almost makes me want to make something like that! Alas, no CNC or lathe!! The finish is wonderful!! Your videos and woodworking are TOP notch!! Thanks for sharing!! Always look forward to your videos!!

[@davidepperson2376]

Such beautiful creations you make. As if art had married math and science…

[@vertitron]

I’d love to see your take on a crokinole board! This kinda reminded me of one

[@danmooney7192]

I think it's safe to say , that you're on another level than the rest of us!

[@rickcimino5483]

unreal how much work goes into making one of these videos......not to mention the project itself. Thank you Frank

[@MarkAlexanderBuchanan]

I absolutely love your combination of hi-tech and analogue craftsmanship, Frank. As always, the finished piece was incredible. Thank you so much for all the effort you put into sharing your thoughts and processes with us.

[@williamellis8993]

That's fantastic, Frank. The only problem for me is that since I don’t do CNC work, my head is spinning from all the explanations lol. That doesn't detract from how amazing it turned out, though. Bill

[@sallyweiner4180]

Remarkable video and remarkable bowl. You are so gifted!

[@JuergenHelmers]

Turned out (sic!) really nice! lovely project and well done!

[@danaowen9014]

I realy like this piece, great color and inlay.

[@glencrandall7051]

Great project. Alas there is no CNC in my life. Thank you for sharing. Have a great day and stay safe.🙂🙂

[@AntCBCV]

Thank you for spending the time to show us your process and mistakes!

[@loucinci3922]

A lot of trial and error. Kudos for your perseverance. Turned out real nice.

[@kenc2257]

What an interesting project. The thought processes and problem solving were pretty involved. It turned out really lovely.

[@lisahodges8299]

No words suitable. I enjoyed that. Birdy

[@peterharkness3547]

Fascinating, whilst I sit drinking my coffee. 😀

[@chadwaldrop2378]

Nice work! I kept thinking that would be a great concept for a Christmas platter. The shape even looked like a tree and the inlays ornaments.

[@MCsCreations]

Stunning piece, Frank! Really beautiful work! 😃 Sometimes all the work and headache pays off! Anyway, stay safe there with your family! 🖖😊

[@brockroberts4258]

Frank, you never cease to amaze me!

[@anthonyfreeman5858]

That is a very unique piece. Great work Frank.

[@vlajkozr]

man, you are from outer space! i literally cannot follow! kudos to you

[@kschleic9053]

If you were going to do these inlays on a much more expensive or harder-to-replace substrate, it might be worth investing in a low-cost 3D scanner. You could scan the cutouts and their corresponding inlay pieces to confirm they match geometrically before gluing them in... Thank you for innovating at the cutting edge (pun intended) of CNC woodworking:)

[@BuildswithBrian]

Your perseverance is admirable 👍 Great project and video Thank you Frank

[@ektopia]

You lost me at the start but it's a fascinating project. Well done. Looks incredible

[@terminalpsychosis8022]

So very pretty. That looks so good. And so technically complex. Seems like it'd be far stronger than normal (thinner) bow ties. The striped inlay pattern is really cool. It's so fun to watch the constant learning and technical improvement. Always impressive. A clock face like this would be amazing! It doesn't have to have numbers, just positions. Maybe symbols for the cardinal points?

[@465maltbie]

Very nice, thanks for sharing all you have learned. Charles

[@HappilyHomicidalHooligan]

20:58 For your next project that requires something held down while it dries but is too large for your clamps, go to your local Value Village or Goodwill store and see if they have an old barbell set and use one of the round disk weights as your clamp... Alternatively, your local Habitat Restore should have some pavers or patio squares you can use... Or, if you live in (or near) a Rural area, see if you can find a large rock with a flat face on it to use as a weight...

[@tasesq]

That’s beautiful. Something to mount on the wall.

[@prodeous]

Another fun project. And as always, enjoyable to watch. :)

[@Paul_Lane]

Very good explanation and beautiful project. It has a Frank Lloyd Wright feel to it.

[@MichaelNatrin]

Impressive making and filmmaking. Great work!

[@emaildavidlehman]

Beautiful, as always.

[@johnthompson6656]

True artistry.

[@TheMortenjohansen]

A pleasure to watch. Thanks for making videos 😊

[@DavidWilliams-qr5ro]

Always a pleasure to see your work come together. The ability to create, program, figure out the right material, and then make all that work out time after time is a great thing. I used to run CNC milling machines in the 90’s, so I am not sure about the software you have today. Couldn’t you do the tool path for one quadrant, then mirror that in the c axis and the y axis? That should ensure symmetry. Great work Frank, thanks for sharing.

[@user-jf9vr3qx5p]

انت مدرسة في الابداع ترفع لك القبعة

[@kenshoemaker]

Try experimenting with using your log as the plug for the inlays. I bet it would look really cool!

[@johnd.4385]

Amazing work! Thank you for sharing.

[@kaisera4996]

Looks so beautiful

[@haroldmoore2563]

Great Video! Love the technological overlays!

[@JustinDepew]

Wonderful video Frank! I've recently been learning how to do inlays on the CNC too. I'm using the same 6.2 degree bit. I've found that cutting into endgrain makes for super clean inlays, so you might try that sometime. I've been using Fusion 360 to make the tool paths. It seemed to work okay but kinda hacky at times as well. Would be interested to see you try it!

[@JakeSpurlock]

Looks like a Big12 logo, haha. Great work!

[@bbassett]

awesome work as always!

[@Lee-qp6gf]

You sure worked for this piece but then, that's what make it fun.

[@SRG-Learn-Makers]

About the press/holding jig (for glue ups of big pieces where clamps doesn't reach.). I think you could put your pieces under a bench and use rods to push the piece against the top. Those rod doesn't have to be perfect, better if they are flexible so you can bend them into position. I hope it make sense.

[@DonMohle]

Too bad you've already done the globe, I would have thought the vcarving would have been the way to go on that. Being a retired engineer, I appreciate your measured approach to developing new skills and processes, and am dying to see what you decide to do with this one on a sphere.

[@durandanne-john6621]

It's gorgeous ! Magnificent item !!! 😊

[@nickyt3269]

for that waste block on the back, some turners on yt use hot glue and it seems to work great.

[@TheCleric42]

Your gluing issue at 14:04 seems like an interesting issue in hydraulics. Might be fun to experiment with different types of glue, potentially with different solvents. Or carving in channels for the excess air/glue to escape.

[@That_Ryan_Guy]

This was a awesome video dude! You should look into a arbour press if you looking for something inexpensive. They are small but have a range of forces (1/2 to 5 tons???!) and would be perfect for the inlays. The throat of the press could potentially be the only limiting factor.

[@StanCrafted]

That's brilliant, mate.

[@abrenning2499]

Always absolutely awesome👍🏻👍🏻👍🏻👍🏻👍🏻

[@jrmintz1]

Cool! With respect to the Purpleheart: might messing with the spindle speed and feed rate have made a difference to the amount of tear out?

[@---l---]

He uploaded high quality! 1080p! 1440! 2160p !! ( may need to have YT premium) You have to click the settings 'gear' and set it manually.

[@theinvasivespecies1119]

Looks great

[@paulkolodner2445]

I have a solution to the problem of tear-out in the purpleheart. Unfortunately, it requires a miracle to work: 1. Make the cut-outs extra deep. 2. Fill them in with hard epoxy. 3. Remove material from the surface until you have removed all the damaged wood. 4. Remove the epoxy. Insert miracle here. In integrated-circuit manufacturing, this is done all the time. The "wood" is silicon, and the "epoxy" is silicon dioxide. The silicon dioxide is removed at the end by dipping the wafer into hydrofluoric acid, which does not react with silicon.

[@tpsb05]

Superbe, comme d'habitude ! Merci

[@beaunakamori9845]

If you sprinkle a bit of course salt on the glue up it will stop it from sliding:)

[@billcornett2256]

For pressing the inlays in try a steel book binders press

[@dgsurfer]

would work for the center chuck adapter as well

[@Shae_Sandybanks]

Such a cool piece!

[@OldePhart]

I saw a press made from Semi trailer air brake cylinders for just this purpose.

[@johnhunt2390]

You can use your CNC router as a clamp to hold something in the middle of a big piece.

[@JustinDepew]

Interesting idea! Never thought of that one.

[@chrissiebeneck3294]

lots of setbacks Frank, way to persevere!

[@arnhemseptember2009]

Fun piece!

[@dirklloyd3257]

You probably missed the feature have been able to make steps with the aspire program but it has been 6 months since I have used the program so can’t quite remember how

[@user-kg6di5lc2g]

4:17 Фрэнк, выпью за твоё мастерство. Приветствую мастера. Редко стал видео выкладывать, а я на тебя подписан. Столяр второго разряда из России. 23 октября 2023 года 12 часов 27 минут. Может свидимся.

[@sdspivey]

While you had it on the CNC, cutting the outer edge, why not make a circular impression to add the chuck? This would have insured that it was centered and you wouldn't need to waste the block you did use. If you are going to turn off the extreme bottom of the inlays, then you should just go ahead and go deeper with the pocket, this would allow the glue to escape and possibly allow easier insertion. The inlay "bottoming out" would be one cause of gaps.