FREE active exhaust delete on Dodge Challenger Scat Pack for that idle/low speed bald eagle sound!

This video shows how to keep the valves open all the time on a 2019 and up Challenger Scat Pack.

[@moparlifescatpack]

***UPDATE 9/9/22…checked on the zip ties and they are still holding strong and tight just like when I put them in there for this video. Car now has 4,400 miles on it and no issues w the zip ties!

[@Unknown-qu9hx]

Yes they won’t.

[@thatboijt5029]

Think it would work on a 2017? Without a engine light

[@moparlifescatpack]

@@thatboijt5029 I believe this only works on 2019 and newer. I’ve heard 2018 and older it causes a CEL

[@magicdirt55]

@Mopar Life I tacked mine in place with my welder on my 2018 dodge charger haven't had any check engine light

[@aint_no_hellcat]

Sorry to resurrect an old comment but to know that the flap is open, the notches on the round portion on top should be pointed to the right?

[@magicmikeidc]

Super simple and took me 20 minutes; most of that time was putting the car on the tire ramp. It’s not a mind-blowing difference but the sound is improved. Thank you for sharing!

[@moparlifescatpack]

Absolutely! Thanks for watching!

[@garyrussell1893]

Did this delete on my 23 today and wow, what a difference. No codes and sounds awesome at idle. Thanks for the vid!

[@moparlifescatpack]

Definitely! Glad it was helpful!

[@truthhurts228]

Just did this to my 2021 scat pack shaker wide body, came with the Borla Atak system and I could hear the creaky doors opening when I hit the "start" button. This worked perfectly and and it costs just 4 steel zip ties! Great video, thanks again!

[@moparlifescatpack]

Awesome! Glad it helped!

[@ReelRigged]

Is it at all possible to accidentally hold the valves closed? Just got this done to mine and im not so sure of the sound.

[@moparlifescatpack]

@@ReelRigged It is possible to wire them closed instead of open. Go to 3:21 in the video and I show how to tell if its in the open or closed position.

[@papasDzz]

Hey I had comment awhile ago ,I want tell love yr videos the way you explain everything,ya make doing stuff so much better with yr help ,so thanks for taking the time to do these helpful videos,ya seem like a straight up cool dude , thanks

[@moparlifescatpack]

I really appreciate that man, thanks. Im glad these videos can be found helpful. I enjoy putting them together!

[@silverbulletcharger4486]

Holy moly.... I was going to buy the Phil performance delete kit. Thanks for saving me 160 bucks.

[@moparlifescatpack]

Just remember this only works on 2019 and newer without throwing a code. Still works on older models but everyone with earlier year models says it throws a code.

[@silverbulletcharger4486]

I got a 2019... thx

[@moparlifescatpack]

@@silverbulletcharger4486 Awesome! Let us know how it turns out when you’re done!

[@davecampbell8882]

Super stoked I just bought a 21 scat pac. Can't wait to do this mod.

[@moparlifescatpack]

You won’t regret it!

[@tcumberland6027]

Dope Vid Man Just Did Mine Sounds Insane with Jlt CIA And BigBoz 5" Tips 😲

[@carlosbigard2853]

She sounds good bro I’m doing this myself tomorrow wish me luck Y’all!

[@hisherhemi]

Just did it to our 2022 1320! It sounds so good🔥 that video coming out Saturday!!

[@carlosbigard2853]

@@hisherhemi let’s gooood!!! I’ll be putting my video out as well I did the fix a few days ago…editing videos tonight

[@hisherhemi]

@@carlosbigard2853 ayy hy thats what's up can't wait to watch!

[@carlosbigard2853]

@@hisherhemi indeed I’ll keep y’all posted

[@chrisromero12475]

What do you do with the spring?

[@unitedtransport7142]

I recommend either doing steel zip ties you can get them from O Riley’s or Autozone or doing two normal zip ties on both valves

[@victorwilburn3498]

Mopar Life: First kudos for a meticulous garage and..beautiful car. Your tip is easy enough. For me, CAN'T tolerate the horribly sluggish throttle response in either "auto" or.."sport" mode. Had a 2020 Charger Scat Pack Widebody. Loved the car, except I had to keep it in track mode (trans/engine) ALWAYS or else it just..didn't respond (in the right gear to accelerate immediately). Sold the car to get a manual version. Love Scat Pack's and about to order a 6-speed manual version of your car (Barton shifter from day 1). We are AGREED the factory exhaust is wonderful when the valves are open (especially once I installed headers on mine) 👍.

[@moparlifescatpack]

The sluggishness is definitely annoying. I ended up putting a pedal commander in. Definitely helped that aspect alot!

[@victorwilburn3498]

@@moparlifescatpack Glad the petal commander worked out for you. For me, automatics just DON'T do it. Scat Pack's are heavy cars (4300+ lbs) so to have the immediate response I prefer, manual transmission is a must have. Yes the ZF transmission will shift quicker than I can, but it doesn't provide the joy of driving that a stick does and paddle shifting ISN'T the same. Just how I am wired. Looking forward to Barton shifter and driving around in the gear of my choice. Enjoy your car sir👍.

[@jeffhershberger]

@@victorwilburn3498 I have a 22 Scat with 6pd and the throttle still has a sluggish response and it drives me nuts. I am used to immediate throttle response from my past cars and it just isn't there with this, especially when heal toeing or driving aggressively. Even just spirited driving around town is annoying when you let off the gas and the engine takes a second to respond and wind down. Oh and don't get me started on rev matching when downshifting.... sigh. I am going to look into a pedal commander for mine.

[@victorwilburn3498]

@@jeffhershberger Jeff: Thanks for heads up on manual car. Automatic was "undrivable" except in track mode. Based on your feedback, I will add a petal commander to my list for "must have" stuff so the Scat Pack has all 500 HP on duty ALL the time. Marvelous cars, that just need a few "tweaks" to be fully unleashed in..near stock trim. OEM, Dodge did ALOT of tuning on the cars which is distinct based on drive mode. The differences in how the car responses with which level of traction/stability control for example, just makes me..laugh and envious of the engineer paid to..test how..sideways the car..can rotate on throttle at a given setting before nannies kick in OR..NOT. WHAT a job to be..PAID for..THAT👍.

[@Fugue57473]

Tried this on my ‘21 SP 6spd and it worked! I used 2 zipties each because OCD lol

[@moparlifescatpack]

Heck yeah! Non regrets! You’ll love it!

[@OmenOfficial]

Genius idea. Im going to do that method to mine today!

[@moparlifescatpack]

Heck yeah! Let me know what you think!

[@OmenOfficial]

@@moparlifescatpack Will do. I have a 2018 but hopefully it still works

[@moparlifescatpack]

@@OmenOfficial well I’m pretty sure it will turn on a CEL on anything 2018 and older but let us know.

[@OmenOfficial]

@@moparlifescatpack Will do. Haven't gotten to it yet. Got busy yesterday. But will let you know

[@liljoesanchez1958]

Welding it will keep it open 😊js awesome video thanks

[@jeffreynye3019]

Great video! I think I'm gonna do this.

[@moparlifescatpack]

Good luck. Its super easy!

[@bigdbassn4489]

This is awesome, thank you. So, when I got under my car to look at mine they were in the 10 o'clock and 4 o'clock position ( I started it to get it up on the ramps and it was slightly warm). Your video shows the open position as 2 o'clock and 8 o'clock. Just to make sure your video is not transposed or mirrored, is 2 o'clock and 8 o'clock the OPEN position? Thank you again very much!

[@moparlifescatpack]

Passenger side open is 2 and 8 o clock. Can’t remember if driver was the same but definitely 2 and 8 on passenger. I had the camera in there just to make sure.

[@hemislidn]

Just Found your channel and bro you hella funny When i get my scat soon we got to Link

[@moparlifescatpack]

Thanks for watching!

[@derektitov6667]

Here's hoping they last and don't melt! Sounds good btw.

[@moparlifescatpack]

🤞🏻 I’ll be keeping an eye (and ear) on them. If they melt I’ll try a thicker one. Time will tell. The plastic on the module doesn’t melt so I imagine they’ll be good but if they do I’ll definitely post an update.

[@hisherhemi]

Good in depth video! Nice widebody scat too 🔥 gonna try this asap cause my 1320 starts up nice but gets way too quiet 🤦🏽‍♂️

[@moparlifescatpack]

You will not regret it!

[@carlosbigard2853]

If it ain’t loud u ain’t proud lol gotta have it doing mid muffler delete next week! They say the mid muffler is what mainly causes the squeak or looseness of the valve flap but if it happen either do this method or delete them all together it’s plenty of kits but I spent $8.99 on metal zip ties and regular zip ties and it’s fixed sooo… y’all be safe out there

[@justinpeterson6839]

@@carlosbigard2853 Mine was squeaking at like 30k miles with the stock exhaust I did mid muffler delete at like 42k anyway kind of want to do this but hows it on the freeway at 75-80 mph?

[@carlosbigard2853]

@@justinpeterson6839 it’s drives just fine I did 110mph on the hwy and got back home let the car kool down and went under the car and took both Actuators off to see how the zip ties were holding and there still perfect…they have kits and all to delete the issue permanently…

[@justinpeterson6839]

@@carlosbigard2853 I was talking more about the drone while you're in the highway since part throttle would essentially have the flaps closed at like 75 or 80 instead of wide open all the time

[@TheShortShortss]

Man your car is my dream car, wish I had it 😢

[@moparlifescatpack]

Thanks! I say the same thing every time I see a Shaker. 🤤

[@dsmith584]

Great video, thanks for putting this together! Do you think the zip tie plastic will melt and break eventually? Thanks!

[@moparlifescatpack]

So far it’s holding just fine and sounds awesome!

[@surfj9009]

Update?

[@moparlifescatpack]

Still holding no issues. Probably 600 miles since doing it!

[@carlosbigard2853]

Still good bro? I’m about to do this tomorrow

[@carlosbigard2853]

What size zip ties if u remember please?

[@otvfilms]

This guy is a vibe 😂❤

[@moparlifescatpack]

😎

[@brody8857]

True American muscle

[@moparlifescatpack]

Mopar baby 🇺🇸

[@Carlos-vo2kh]

All i did was start my scat and set it on track mode since the flaps open on track mode, and find the fuse for the active exhaust and unplugg. Have a check engine light but it doesnt bother me. Sounds how its suppose to sound👍🏽

[@ImportDomestic2006]

So far with everything you've done using the zip ties. Is still working correctly without triggering the engine light? We happen to have a 2021 Challenger R/T Scat Pack Widebody Shaker. Can you share the link on those magnetic jack points.

[@moparlifescatpack]

Yeah zip ties are still holding no problem. Never had a check engine light. Should work no issues on yours too. Mine is also a 2021! Good luck!

[@DerickZ28]

Who would buy a Scat Pack and not want to hear the exhaust....

[@spockistheman]

Great video, thank you! I’m going to do this to my 23 R/T this week.

[@moparlifescatpack]

Good luck!

[@eriktrevino5374]

Thinking about doing this did you ever end up getting the check engine light?

[@moparlifescatpack]

No check engine light on 2019 and newer.

[@spockistheman]

@@eriktrevino5374no light so far, it’s been over a week

[@spockistheman]

@@moparlifescatpackI tried the metal zip ties like others had suggested, but I couldn’t pull them tight enough. Plastic ones get the job done.

[@Uchihaa_Ghostt]

beautiful

[@moparlifescatpack]

Thank you! 😊

[@liljoesanchez1958]

😊great video information thanks

[@moparlifescatpack]

Thanks!

[@robertrabe5885]

Great video. Do you regret doing the muffler delete at all? Trying to decide between the muffler delete and the Vibrant.

[@moparlifescatpack]

Muffler delete is a MUST!

[@justmat28]

You could have used a metal tie as opposed to plastic.

[@RB-zn5hf]

After removing that rotating spring, would the force of the exhaust in itself not keep those little flaps wide open? Do you really have to tie it down or would it cause metal clanking?

[@moparlifescatpack]

It would clank like crazy! You definitely need to keep them in place.

[@xta.c]

I wanted to do this on my 5.7 rt but ended up having the shop completely remove the whole valve off and weld a replacement pipe with the actuator zip tied somewhere down there. Cost me 150 bucks but worth it. Good video and pretty clean garage 👍🏼

[@brody8857]

Thanks for this video I’m def going to try this myself! I think I’ll look for metal zip ties just to better deal with heat rather than plastic. I love my cold start sound but after warming up the idle is too quiet.

[@brody8857]

I actually did some more research and found out that apparently this only works for scat packs and higher so for my 5.7 it will throw a code if I try to tie it off. I’m going to look into the Z automotive kit that plugs in.

[@moparlifescatpack]

For sure. Easy to do and still sounds great.

[@robertallen2104]

Just set your Custom Drive Mode page to either Sport or Track for the transmission and it will stay open and you don't have to get under the car.

[@moochiehbtl_]

not how it works.

[@glleboy2233]

the valves still close in track mode when ur not on the gas. which is why IMO dodges active exhaust is terrible. ford does a good job at the whole active exhaust thing

[@RRnation7]

Sounds a lot better! Is the zip tie still holding up fine?

[@moparlifescatpack]

Zip ties still as solid as the day I put them on.

[@chrisb2543]

Did you actually remove the devices or did you leave them in and tie the valve to keep from throwing a code?

[@brody8857]

Just tie off. The car needs the active exhaust to stay on or it throws codes and messes with it

[@jeffreynye3019]

After you zip tied the valves open, did you put the moduals back on minus the springs?

[@moparlifescatpack]

Exactly. I popped the springs off and put the modules back in place.

[@SinhuePavia]

Great video my dude - why you take off the scat pack badges?

[@moparlifescatpack]

I just like the sides smooth and uninterrupted. I left the badge on the back though…I like that one! Just personal preference.

[@Smurfd392]

Good evening, my apologies if l missed you speaking it but did you put the spring back on?

[@moparlifescatpack]

Leave the spring off. Store it somewhere in case you ever want to make it be an active exhaust again. This procedure is completely reversible.

[@madstrikepolice-dylan-3156]

Had a mid muffler and rear res delete on my 20 Scat and it sounded louder than my 2021 scat with the same mods. You think it’s because of something with the active exhaust?

[@Arthur-sp5ps]

Hey Mad, not sure if someone responded below. I believe it's the larger catalytic converters on the 21's. They are massive in the 21's. I had a 19 and noticed the difference. Just floor it and your sadness just goes away :).

[@marklove6385]

i have 2016 scat pack rt 6.4. i just had muffler delete..... when driving and it down shifts its so sweet to here the exaust poping like a big rig.....

[@moparlifescatpack]

Awesome! Inexpensive mod and is music to the ears!

[@TCat-ve9qi]

I don’t even own one but this is a cool mod. The zip tie doesn’t melt? I know it’s not touching the exhaust but its got to get hot right?

[@moparlifescatpack]

Hasn’t melted yet

[@mp7459]

They make a heavy "mechanics" wire that won't break. I think you can find it at the parts store.

[@moparlifescatpack]

The zip tie turned out to be way easier and way more secure. I’ll update if it ever fails though.

[@carlosbigard2853]

@@moparlifescatpack please keep us updated on the zip ties still working I’ll be trying this tomorrow

[@chrisromero12475]

What did you do about the spring?dont the other side spin?so wouldn't you have to put something in there to have it stop spinning?

[@moparlifescatpack]

Remove the springs (both sides) and zip tie to flaps in the open position. Store the springs somewhere so you can put it back if you ever decide to.

[@ggv69340]

How long have you had the zip ties exhaust getting hot not melting the zip tie ???

[@moparlifescatpack]

Still going strong. Hasn’t melted at all from posting the video until this post.

[@itheasianboi5508]

I have a Borla ATAK Cat-Back Exhaust with Replacement MDS Valves installed today but the car sounds not loud at all because I don’t have valves delete thing on…. This is the message from the borla atak exhaust when I click read more! This exhaust INCLUDES Active Valves (click for more information) Valves are built into this BORLA® exhaust, retaining the valve functionality from your O.E. exhaust for the best sound quality. The valve actuators will be transferred from your O.E. exhaust to a matching bracket on the BORLA® exhaust. That’s what it says

[@trucking4racecars]

After doing this in my 19 I had no issues for a few weeks and now I’m getting a po1128? Anyone have this issue? Wonder if it’s related to the active exhaust mod? Car has 27,000 miles on it I can’t see an o2 really going bad?

[@fastmoney__884]

Same in 2017 it’s cause the spring

[@keepyourcomposure3018]

Yessssa!!!!!!!!!!!!!!

[@Kakashi_iSan]

Great vid! Are the zip ties still holding till this day?

[@moparlifescatpack]

Still holding as good as when I put them on! I checked them not too long ago and no signs of wear at all. Some commenters say they use metal zip ties but I haven’t had any issues with the ones I used in the video.

[@Kakashi_iSan]

@@moparlifescatpack did you unplug the battery or anything before you did this?

[@moparlifescatpack]

@@Kakashi_iSan no I did not.

[@uniqueexploitz833]

I have a 2016 scat pack. This fix worked but i wasn’t able to remove the springs without it throwing a code. My issue was the terrible rattling. The zip ties will fix the rattling but you need to keep the springs on to avoid your car throwing a code.

[@moparlifescatpack]

I believe on the 2016s will throw a code w this mod no matter what you do…as far as I know. I took my springs out but left the modules on.

[@upfront9thward]

I have a 2015 and I want to do it without throwing a code so I should leave the springs in?

[@BioRedneck]

I have a 2019 challenger r/t and did this mod and removed the springs and threw a code within 20 mins of driving. Will keeping the springs in fix it? With the break the actuator of the spring doesn’t move flap?

[@redddandy7527]

so you left the springs on ???

[@johnv6806]

I have a 19 widebody scat and I've been looking at exhausts because its too quiet. After seeing this I might just do a mid muffler delete and keep the valves open with your trick and save a few grand.

[@moparlifescatpack]

Cheap and sounds amazing. You won’t miss not having an expensive exhaust.

[@blazinjaye45]

Dynomax race bullets with mfer delete

[@KevinLeeLowhorn]

I was wondering what this would sound like with the mid muffler delete also. Did you end up doing both?

[@johnv6806]

@@KevinLeeLowhorn i did a mid muffler delete and it is a bit louder but not that much difference. Still thinking about getting a new exhaust.

[@julyfishy392]

Can we get some revs ? The cold start revs sound like a hellcat on mine. I just need those valves open!!!

[@392scatbillionaire2]

Before the delete, was it, making a rattling noise? Or you did it for just the sound?

[@moparlifescatpack]

I didn’t have any rattles. Just did it for the sound.

[@courtmcclain1680]

Did you keep the springs out when you tied the valves open?

[@moparlifescatpack]

Yes. Keep the springs out.

[@samanosukeakechi4388]

Still holding well? Will this work on 2017 T/A 392? It's a bit loud already but not really...

[@iamjohnson2960]

2017 needs the actual delete kit. Worth the $150 bucks. Khaos motorsports has great ones

[@blanco3742]

How's it been since you put it on? Any melting at all?

[@moparlifescatpack]

Still going strong!

[@vic5.7]

Maybe a dumb question or i missed it in the video but did you remove the spring completely and not put it back after all?

[@moparlifescatpack]

Correct! The spring stays out!

[@vic5.7]

@@moparlifescatpack thank you brother!!

[@moparlifescatpack]

Anytime!

[@hayleyandkilo]

maybe you gotta use steel zip ties, cuz you know,.......exhaust 🔥🔥🔥🔥

[@ztidz]

I got a 2017 charger 392 I wonder if I’ll get check engine light. I know people get check engine lights when they take out the fuse when the car is cold but this should do it

[@moparlifescatpack]

I think it only works for 2019+ as far as not throwing a check engine light.

[@emiliocarrillo2640]

Why she sound like a Hellcat 😍

[@julyfishy392]

Right

[@ggv69340]

Hi great vid following I'd like to do that to my 2021 scat challenger mine is manual transmission I'd like to have it a little louder

[@moparlifescatpack]

It definitely gives it that low speed sound it needed when those valves would normally be closed.

[@humbertonavarro9409]

Any way to put the springs back in and still lock it open with the zip ties ? Just so if I ever want to change back I could just cut zip ties

[@moparlifescatpack]

No you need to leave the springs out for this to work. To reverse it you’d have to cut the zip ties and put them back in.

[@mikeyespino1162]

They have metal zip ties at any Ace Hardware. 👍

[@carlosbigard2853]

Just did this the other day video coming soon I’m editing it! Also I used both metal and plastic for more support 2 on both sides

[@UN_WID]

So if u shotdown the car. The valves will automatically open till next start and then close after like 1 minute?

[@moparlifescatpack]

From factory the valves open fully at cold start then close as it idles. After this mod they stay open forever under any condition no matter what drive mode or anything you set the car in.

[@joedirtjr6299]

Question where are you putting your jack stand in the rear? Are they flat topped? I can’t find any good place to place them worried of breaking or bending something.

[@moparlifescatpack]

I use the pinch welds and use this on the jack stand. Hope that helps! www.amazon.com/Byenins-Slotted-Universal-Magnetic-Adapter/dp/B073SQRYB3/ref=sr_1_9?gclid=CjwKCAiAp7GcBhA0EiwA9U0mtotQzPxAo32U-wh-TdW5D-NXYXC6MWNPgyP-8N5NLuxgCELydTA7choCkogQAvD_BwE&hvadid=256094135713&hvdev=c&hvlocphy=1026579&hvnetw=g&hvqmt=e&hvrand=1528115887799321094&hvtargid=kwd-388865205530&hydadcr=7515_9880907&keywords=jack%2Bstand%2Bpads%2Bpinch%2Bweld&qid=1670190355&sr=8-9&th=1

[@816_ce]

You could just put it in sport mode and it opens them up too

[@sanmiguel4501]

Do I need to out the springs back in or I can leave them out.. I have 2021 charger scat

[@moparlifescatpack]

DO NOT put them back in. They stay out of the car. 👍🏻

[@chriswalker3981]

I see it’s been 8 months as of today. How’s it handling? Same zip ties still on? Any codes?

[@moparlifescatpack]

No codes and zip ties still going strong!

[@derrickonealjr8381]

kzbin.info/www/bejne/d5Waknh8qa6NmM0

[@Flytona_392]

Great mod brother I’m bout to go Jack up the Daytona 392 🏃🏾‍♂️💨💨

[@moparlifescatpack]

Awesome! You’ll love it!

[@gerardorivera712]

So doing this actually fixed my problem on my r/t 19, that annoying rattlesnake sound finally gone 😭 now I’m nervous about a slight small ticking from the engine side is that normal for challengers? I have 31k miles car runs fine

[@moparlifescatpack]

They do have a tick but it’s always best to let a professional listen. They can tell the difference between a bad tick and a normal Hemi tick.

[@johncorral8613]

Did you have the rattlesnake noise on cold starts!?? I have the same car as you and it’s been doing it since I bought it.

[@danielturner3891]

Had a ticking noise on the left side found out it was two of my header bolts broke off common for these cars

[@816_ce]

Small ticking in mine aswell man . Did u ever figure urs out ??

[@Toast_King15]

Would this work for my 2017 scat pack or would I need get the mechanical plugs

[@moparlifescatpack]

I’m pretty sure your year it will not work without triggering a check engine light. You would probably need the bypass one.

[@silverbulletcharger4486]

The engine light came on after running my car several minutes after completing spring removal. Yes I made sure the valve was open and wire was still attached. I have a 2019 RT. Bummer!

[@moparlifescatpack]

That is a bummer. Make sure you didn’t put the spring back in. It stays off the car.

[@derronliggans6743]

Mine came on too but I left the springs in instead of taking them out. Code reads “ lost connection to valve 2)

[@ksteak27]

Active exhaust? AIN'T NOBODY GOT TIME FOR DAT!!!

[@moparlifescatpack]

Absolutely! Annoyingly silent cruise mode delete! Active full time enjoyment engaged!

[@TheFpsunited]

So are you zip-tying it open and not installing the spring back in?

[@moparlifescatpack]

Zip tie it open but DO NOT put the springs back. They stay off the car.

[@lenmurgi9533]

Great channel! Question tho, why not just run her in sport or track mode, valves are open then, or use custom.

[@ztidz]

They still close when stopped.

[@julyfishy392]

They never actually stay open so when u wanna rev the car it sounds like junk

[@BjornStyrmir]

Just found this video, what exhaust are you running?

[@moparlifescatpack]

Mid muffler delete and I have added quad tips since this video. kzbin.info/www/bejne/iqeWf5htebV-bacsi=BQq6RprCltqbq3qV

[@BjornStyrmir]

@@moparlifescatpack nice, i have a 21 charger 392 Daytona that I did a resonator delete and added supper 44’s in place of the stock mufflers. I’ll be doing this active exhaust delete on mine Sunday.

[@moparlifescatpack]

@@BjornStyrmir easy peasy! Enjoy that Mopar!

[@Asm0daus]

The valve on drivers side rotated clockwise is open? Is it counterclockwise on the passenger side?

[@moparlifescatpack]

Go to 3:20 in the video. It shows the open position for the passenger side. Hope this helps

[@Asm0daus]

Ah ok so theyre both clockwise, i thought passenger was on opposite side. My 2023 scat has almost 1900 miles. Got the mids deleted today and going to do this tomorrow. Thanks for the helpful video and quick reply!

[@moparlifescatpack]

@@Asm0daus After the mid muffler delete and valve deal get those tips from my other video. Absolutely PERFECT sound now.

[@marlostanfield8127]

​@@moparlifescatpackdoes the mid delete void warranty? And which Tips do you recommend?

[@moparlifescatpack]

@@marlostanfield8127 I wouldn’t see how it could void the exhaust warranty but its 100 percent reversible if you ever need to take it in for exhaust issues. As for tips…I recommend the raccoon performance 4” quad tips. raccoonperformance.com.co/ They look incredible and sound great. Here’s a link to my video on how to install. kzbin.info/www/bejne/mXXMZ6OGrJx3r7csi=TBtuypTBqm1cnlt3

[@Unknown-qu9hx]

Aren’t u experiencing lost of power in low gears? I’ve done this one almost a year now but still keeping it as my borla squeaks as hell.

[@moparlifescatpack]

I haven’t noticed any loss of power. She moves out quick!

[@wetluv4]

How do you like your borla exhaust? Is it the "s" ?

[@MarcusCoker1]

Damn my CEL is on for the passenger side one cuz I wanted to see if I could take it off and clean cuz it would make a rattle noise

[@gerardorivera712]

I just got a challenger 19 r/t and got a muffler delete I always hear like this rattlesnake noise around 25-40 mph sport mode off with sport mode on it’s good but what is it should I do this mod with my hemi? Cause I just want it to sound clean

[@moparlifescatpack]

That rattlesnake noise may a loose connection somewhere when they did your muffler delete. Maybe a hanger is rubbing or something.

[@tcumberland6027]

Do you have any rattle from it being open?! Cause I do using cable ties.

[@moparlifescatpack]

No rattles Make sure they are tied firmly.

[@keyan1815]

I zip tied them firmly and still have a rattle too. Did you get yours resolved ?

[@phillbrigham836]

What about running it in sport mode.

[@Bthast62]

I zip tied mine in the open position. After the first drive the exhaust was hissing loudly under throttle and chirping at idle. Sounded awful. Get back under the car and inspect and the valves were partially closed and moving freely. Not sure how they moved as the zip tie felt nice and sturdy. Might try again! This is on the hellcat but I believe components are the same.

[@user-wo1cv9sc9c]

Dude! I’m having the same problem I believe , I did the whole zip tie thing but my exhaust is hissing and it sound annoying

[@Bthast62]

@@user-wo1cv9sc9c yeah I just put the springs back in and have been enjoying it haha. I want a borla cat back!

[@treverblake877]

Do you have to worry about anything doing this like blowing your engine or something

[@moparlifescatpack]

Definitely not. The valves open and close naturally depending on drive modes so all this is doing is just keeping them open making more of an open exhaust. Totally harmless.

[@CamboCam]

Did you put the springs back on after?

[@moparlifescatpack]

No. Springs stay out.

[@spockistheman]

The whole point of the video is to take the springs out.

[@brianparker6714]

What could you do if one of those modules broke complete off of the exhaust?

[@moparlifescatpack]

You’d probably want to get another module.

[@392_frankie]

I started to get scared because I’m barely at 2k miles in my 2022 RT charger and literally sounds like a V6

[@scatsam7566]

Do you think I can get away with just tack welding it to stay open?

[@moparlifescatpack]

I don’t know anything about tack welding but the zip ties are completely reversible, if need be, and super easy to do.

[@adriant6589]

did you put the spring back on bro?

[@moparlifescatpack]

Nope. Remove the spring but put the actuators back on.

[@nathanielrodriguez8845]

Still no check engine light?

[@frankortega400]

I'd it with exhaust simulator kit and the check engine light comes out any advice out there

[@moparlifescatpack]

This only works on 2019 and newer from what Im told.

[@theflashjaxx]

safety wire, it's made for this exact use

[@gregmckendall1587]

This is what I would have used too.

[@philhull29]

hey bud I got a 21 scat myself just did a mid muffler delete and def does not sound as loud as yours. Is that all you did to yours ?

[@moparlifescatpack]

Yep. Mid muffler delete is all that’s been done for the exhaust. I do have a Hellcat airbox with Hellcat filter. Not sure if adds anything into the sound.

[@philhull29]

@@moparlifescatpack thanks for the info man I just added the hellcat air box today gonna do the active exhaust mod like you did. Love the videos man keep ‘em coming

[@moparlifescatpack]

@@philhull29 I’ve been lazy recently with my content. 😔 Been working on my grocery getter. Lol Congrats on the mods!

[@philhull29]

@@moparlifescatpack thanks man should post up the grocery getter. You got an instagram ?

[@moparlifescatpack]

@@philhull29 I don’t do anything on Instagram. Right now Im fixing up my 2008 Sequoia. But it doesn’t really fit in w the channel. Lol

[@mario217578]

Anyone know where to buy the sensor mentioned to bypass the check engine light?

[@graysonhoffman2823]

They’re called Z automotive active exhaust delete kits. It’s just a thing you plug in. $200

[@cleveland4kid20]

Is this still done to your car? You ever have any check engine light come on?

[@moparlifescatpack]

Yes still on the car with the original zip ties. No check engine light as long as you have a 2019 or newer you should be good.

[@cleveland4kid20]

@@moparlifescatpack thanks

[@Emantu]

Does it drone on the highway with valves always open?

[@moparlifescatpack]

I’ve never noticed any droning issues and have never had any passengers complain about it being too loud. It’s completely reversible though if you end up not liking it.

[@Emantu]

@@moparlifescatpack alright thanks :) in tired of putting the car in track mode just to hear it pop and purr properly 😂 hopefully this does the trick and i can cruise on auto

[@moparlifescatpack]

@@Emantu I’ve been loving it. No regrets at all.

[@gerardorivera712]

Does this mean I can drive with sport mode off and valves open? Meaning louder but easier on gas?

[@moparlifescatpack]

It’ll be same on gas probably unless you constantly floor it like I do…lol But yes the valves are open 100% of the time even in regular mode.

[@ReaperGaming97]

Does the exhaust keeps open on sports mode? Got a 19 rt

[@moparlifescatpack]

I believe it does.

[@truthhurts228]

I'm about to do the same thing on my just bought 2021 Scat pack shaker widebody with the 6 speed. I'm going to use stainless steel zip ties with the tightening gun, bought on Amazon. Easy peazy!

[@moparlifescatpack]

Congratulations on the car. Let us know how the metal zip ties work out! If mine ever fail that’s what I was going to use to replace them.

[@jameschilemi4690]

I have a 2016 scat pack and sprayed it with white lithium and was still getting a slight noise. I decided to use zip ties and lock them in while in an open position. I put them back and haven’t gotten a CEL since. Damn it feels good not to hear the f*kin noise! lol

[@moparlifescatpack]

Great job!

[@bilos.hellcat3070]

I wonder if this will work on a 2015 Hellcat

[@moparlifescatpack]

Will probably throw a code if I had to guess.

[@danharmon9237]

.041 stainless steel wire worked for me.

[@moparlifescatpack]

Good choice. Should easily hold!