FREE Dead steering servo fix

in this video i show you how you might be able to put together a few old steering servos to get a single working servo for free!!
dizzy by Joakim Karud / joakimkarud
Music promoted by Audio Library • Dizzy - Joakim Karud (...
#rccars #rc #x #traxxas #rchobby #rccar #rccrawler #rclife #wd #rcracing #radiocontrol #offroad #s #rcoffroad #rctrucks #tamiya #axial #prolineracing #arrma #rcdrift #rctruck #rccommunity #trx #rchobbies #losi #scalerc #axialracing #tinytrucks #scx #bhfyp

[@monkeytrident]

A good video for us noobs to the hobby many thanks.

[@harro2395]

Did this work for you ?

[@Abszurdista-fatalista]

The motor spins freely in mine but the horn isn't moving (spline/horn is okay). Took the top part of the servo off, gears are intact, just no connection to the motor. Any ideas?

[@NONONSENSERC]

I have so much of these broken servos😣 Unfortunately, all of the gears are broken but I do not know why😂😂😂

[@harro2395]

Lol dang that sucks I’ve got tons of these servos as well so I figured id show people that it’s possible to get one working for free if you got enough 😁lol

[@harro2395]

A lot of mine have striped gears as well lol

[@NONONSENSERC]

Really helpful video. Thank you👌

[@loga_912]

Bro my 1/28 wltoys k969 has a servo problm , but its not dead but when i turn it its like lagging and stucking , how could i fix it :(

[@fiercetatsu6782]

Broken gear

[@fishyboy2447]

I have a Kyosho RC Surfer. Steering worked great for about 3 go outs. Saltwater surfing, but always rinsing with fresh water. Batteries all good. Propeller works fine. Just no steering. Would gears really be a problem?

[@harro2395]

It’s possible but occasionally the servo can die just from water

[@therealsaintlucifer777]

My gears ain't broken it just won't turn. It doesn't seem to have much power

[@fishyboy2447]

Same with my Kyosho Surfer. Propeller works fine, but steering stopped working after 3 go outs in the surf. Fresh water rinsing after. Just no steering.Any comments?

[@geolopez914]

You didn’t do that rite! That’s why the servo makes that noise. You shouldn’t make videos if you don’t really know what your doing!

[@harro2395]

Never used a servo so small before what exactly did I do wrong ?

[@tomtizumsrc963]

Mr.Lopez is clearly a hater. Because your video was successful. The servo worked after doing what you did mate. 👍🏻 Thanks for sharing and showing everyone how to make a working servo out of two broken servo’s

[@SpeccyMan]

You really shouldn't comment if you don't know what you're doing when it comes to the English language!