Frigidaire Electric Range Repair - How to replace the Infinite Heat Switch

[@bjensen64]

Thanks for this video, not many out there that describe this style of front panel. Who knew those plastic rings were the key? The new switches are very different but they are labeled P, L, H, exc, just need to pay attention and move one wire at a time.

[@chrishamilton5204]

I have the exact problem on that exact range, crazy. Thx for the help.

[@barbaraphoenix600]

Perfect diy video thank you for all the tips and easy to understand directions. Just replaced the switch and appreciate your helpful video!

[@wesspence]

Thanks Mike! Very concise and useful guide.

[@Nuomee]

Thank you so much for kind, clear instructions

[@ryanfitzsimons7388]

Thank you, this really helped

[@agaur86]

Thanks for this video! Can you clarify which screws to take out for the front panel to come off? I have a Frigidaire with a very similar front panel, and a knob has come loose. I took out 4 screws which are at the front bottom of the panel, but it still won't budge. I don't wanna use too much force and end up breaking it.

[@brentollson6810]

Ya trying to find out the. Same thing?

[@agaur86]

@@brentollson6810 I figured it out. What's suggested in this video is all it takes! Just pull out the knobs, remove the washers underneath them, and the front panel will come off. No screws need to be even touched! Hope this helps.

[@brentollson6810]

@@agaur86 ya I also figured it out. Thanks for the info. 👍

[@kellylane1962]

When you say "a knob has come loose" do you mean it dropped down inside? I have that on my stove, I'm trying to understand if I need to order a part or if I just need to open the front up, push the knob back through and screw it in place.

[@Cribbzz87]

You saved me a lot of money

[@judith801]

how did you slide the range out? mine is tightly wedged into an island with quartz counters.

[@cherrytree3519]

Thank you,very helpful.l just met the same problem.

[@castle6555]

Thank you for the video!

[@rickpatel4572]

Where to buy parts from?

[@sgwardo1953]

Thanks, very useful.

[@mikesrandomdiy8002]

Thanks for watching

[@bamboolu6585]

Very good!

[@sergiogeronimo1825]

I have a question why you change all the switches. Have a problem the same brand of yours but my problem is all the burner will not work and you turn off any switche no power at all.

[@kellielaine5848]

thank you!