⛏️From dented to dazzling ✨SHC has you covered✨

Learn how to pull sheet with our handy "no nonsense" tutorial!
Check out the SHC website for all kinds of gadgets and goodies - www.slaughterhousecustoms.com/
Join the REVOLUTION! Subscribe - / @slaughterhousecustoms
SHC recommends:
www.amazon.co.uk/hz/wishlist/...
Follow us everywhere and anywhere!
Instagram - slaughterho...
Facebook - / slaughterhousecustomsuk
Make sure to SUBSCRIBE to see new videos EVERY WEEK!
Edited on Lenovo equipment
Filmed in conjunction with Canon
Disclaimer:
Due to factors beyond the control of Slaughter House Customs Ltd, I cannot guarantee against improper use or unauthorized modifications of this information. Slaughter House Customs Ltd assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Slaughter House Customs Ltd recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Slaughter House Customs Ltd, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Slaughter House Customs Ltd. We always recommend getting a sign off from a qualified mechanic, auto electrician or engineer after completing any work on your own/others vehicle.
Love from SHC.

[@5774222]

Было 2 килограмма шпатлёвки, стало 1 килограмм )

[@kalashnikov_grigory]

Ремонт от мастера😅

[@ceorfceorfevich3729]

Шпакля тоже имеет свой срок , поэтому ее решили заменить

[@VANO_Minsk]

Плох тот мастер, который не отxyecocит предыдущего 😂

[@user-gr5kg3sz6o]

Ахах,точняк​@@VANO_Minsk

[@CarManagerLive]

А что за молотки у него рихтовочные?

[@belalalbolbl2262]

The professional is the one who applies the least amount of paste

[@hotrodmercury3941]

The worst is running out in the middle of a job.

[@randfee]

no paste needed, just make sure it's corrosion protected and be done with it!

[@Space.Ghost.]

​@@hotrodmercury3941my favorite is when it kicks faster on a hot day.

[@ronchabale]

So you remove the bondo/filler and put on new filler..

[@ryano8768]

It was a poor repair replaced by a good repair.

[@user-wv9uj5wp2u]

Personally if it was me I would have had that area out and properly grafted in some sheet material instead of filling it with filler, this is not a good job at all.

[@ceemch]

Ohh jeez there is a lot of keyboard know it all's here, nice repair buddy. What was the black liquid you used after you had finished panel beating?

[@Gooie69]

​@@user-wv9uj5wp2u you're going to cut out and replace sheet metal and not use any filler? Yeah right.

[@user-wv9uj5wp2u]

@@Gooie69 I'm not sure what country you're from but if you're in the UK you should understand that the salt and moisture on the roads here do not work well gobbo, the amount of classic cars, commercials and motorcycles our family have restored vehicles dating back as far as 1949 with poor repairs like this is unreal, it didn't leave the factory with this rubbish some may have left with lead but that's it so why should it have it now. Unfortunately I am unable to respond to your replies with our portfolio of classic vehicle restorations which we do for a hobby as well as for other people but I can assure you I know a thing or two about proper restoration and being around myself for 40+ years I like to think I know a thing or two, so less of the pathetic keyboard warrior dross.

[@KNIGHTSFALLN]

Bondo isn’t the problem in body as most people think. It’s filling cavities with bondo instead of pulling the dent first. This was the way to do it. And they used the bondo as a leveler with the thickness of the previous paint.

[@DylansPen]

We generally never put more than a 1/4 inch of plastic (bondo) on a pulled dent. If it were possible to quickly pick and file a dent we did that and used no plastic.

[@davidtaylor4053]

Lead

[@timnewnham6526]

Seems like a lot of work to basically just fill back up again 🤣

[@_JoeMomma]

Way better repair than before tho. Last dude say nah screw this and did the shadytree special

[@yhshah21]

@@_JoeMomma exactly a lot less filler was applied with this job making it less prone to cracking. More filler = easier to crack because of mositure

[@pmolitierno]

Most of the filler is sanded away. This is the correct way. Filler is never supposed to span that much distance in that thickness level. Here it's only filling in some of the lows and the rest is sanded away

[@monsieurtukini7051]

​@@pmolitierno A fine job indeed.

[@iceman125971]

He didn't fill it. He smoothed it every car ever will always have body filler on it AKA Bondo. Bondo will always be on every car because you cannot get a car perfectly f****** flat and smooth so to get it perfectly flat and smooth you have to add some Bondo to it to get the slight waves out of the body line because you will never be able to get all of the Waves out of the metal. Before it was filled because there was a dent and there was a lot of filler. After there was no dent and there was barely any filler it was just skimmed on top. A light skim layer. But yes please keep showing and telling us all about your obvious lack of body work or experience with cars at all while believing you are the best and a complete know-it-all.

[@RobertKelleners]

Spachtel runter spachtel drauf. Wen ausbeulen dan vernunftig mit nen spotter und metall finish.

[@missionslos8856]

Lern schreiben.

[@RobertKelleners]

@@missionslos8856 sind wir hier auf ne Grammatik schulung. Bin holländer und gib mein bestes. Was hat das hier mit die arbeit zu tun. Du besserwisser tastatürritter

[@RobertKelleners]

@@missionslos8856 lern du dich erstmal aus die fiktiver welt raus zu würgen du kleiner spatz.

[@RobertKelleners]

@@missionslos8856 ach je wieder so einer tastatur ritter. Ich bin holländer und gib mein bestes. Geh anstatt zu zocken erst erforschen ob du ein kerlchen oder weibchen wirst du 15 jähriges kleines licht. Ich restauriere schon seit 40 jahren old und youngtimer und weiss worüber ich rede. Ich bin einen metallshaper. Ja such dir das wort mal auf. Damit gesagt lern laufen bevor du jemand drauf hinweist wie man kriecht

[@JimmyEG1]

I used to do a lot of bondo, duraglass, and worked a lot with fiberglass. All the dudes that I worked with there mentioned, whenever you do body work on cars the less bondo you use the better.

[@daneiwldruiz3886]

Pues al enderezar el objetivo es dejarlo lo más parecido a como era para que cuando se Enmasille no se use tanto material y se ahorra tiempo al tener q lijar menos

[@SoundTracx]

metalwork is 50% of bodywork

[@thecommonsenseconservative5576]

Just came for the comments from all the professionals😂😂

[@jovannymartinez1428]

Professional here! This guy took too long

[@thecommonsenseconservative5576]

@@jovannymartinez1428 lol ok

[@PrestonGarvey69]

Not a professional my own self, but this Fix isn't what you'd do to a classic. With a classic; you use led, or get an artistic welder; NOT BONDO. What the guy in the video did was a joke. He just did a better bondo job; which will fall out over time. If he tries to sell it to a guy like me; he'll get angry when I go down it with a magnet and offer him 500$ for it, then inform everyone else he is selling it too. I guarantee that there is more than just one spot filled with bondo.

[@flyyyjr]

“……No matter what the subject, category or types of ingredients the talents of any ARTIST may so use, their talents are never tiring”!!! G-MOMMEE

[@Tochkazzz]

Убирать пыль от шпатлёвки лучше влажным способом (растворитель или что-то подобное), так как вся эта пылюга останется в лёгких, если работать без защиты

[@padavan5427]

имеется ввиду уборку сжатым воздухом?

[@Tochkazzz]

@@padavan5427, нет, имею ввиду взять помпу маслобензостойкую (у вюрста такая есть), залить все это дело (я бр-2 использую), промахнуть салфеткой специальной плотной. На худой конец, смочить тряпочку в обезжирке и смахнуть пыль от шпатли. Сжатым воздухом вы поднимите всю пыль в воздух и это не айс (лично мое мнение), и пыль эта может осесть в лёгких если работать без защиты. Берегите здоровье)

[@Name-lb2rx]

Растворителем убирать советуешь?😅

[@johnbull8088]

Про шлифовку с пылесосом не слышали ?

[@kowitchansungnern6283]

เอากระดาษทรายจุ่มน้ำแล้วขัดเพื่อความปลอดภัยจากฝุ่นใช่ไหม

[@user-hd7wr5ib9n]

быстрая и чаственная замена шпакли на шпаклю

[@padavan5427]

гыгы. Если б для себя, то я бы там сначала кислотный грунт потом обычный и потом уже все остальное, а еще не забыть с обратной стороны обработать и промаливить. а это на год или 3 (по погоде) и продавать.

[@SlS56OrB]

Вот вот

[@user-yp1jm6jy9z]

Где то на просторах Ютуба видел глиной замазали, краской пульнули и на продажу 😊

[@AndreyZ1000]

Проорал😅

[@guyonthecouch007]

I can't believe the dent was never even pulled out at least.

[@Nysdaddy]

I can’t believe there’s 55 people agreeing with you.

[@pablodelfin9181]

I bet my car has like 20 pounds of bondo from all the previus poors body works

[@alkonaut1533]

Современный металл присоской порвать можно. Вот же раньше делали - рихруется обычным молотком, не гнётся вся малина при работе зубилом...

[@Slayer-33]

Skanktacular my friend

[@lewf5685]

Yes!!! Awesome! Thanks for the show.

[@larrynason8716]

Those belt sanders are the bomb! Wicked versatile, I love mine. 👍

[@user-arbzerZ]

Приятнее, чем смотреть как чьи-то дети выкладывают себя здесь в чем мать родила. Мужик, ты делаешь хорошее дело - за 30 секунд показал больше полезного для молодых ребят, чем тысячи

[@bangroll1539]

А зачем вы смотрите на то как "чьи-то дети выкладывают себя здесь в чем мать родила"?

[@EtotMoy]

Только делает он не правильно

[@calgar42k]

I spent my childhood in a bodyshop full of Ferraris, Mercedes and Rolls Royce amongst a myriad of other famous brand, one day the owner's son fumbled a job, his father went ballistic on him and told him he gave him the paint gun too soon and that he would be sanding mastic for the next 10 years😂... The old man kept his words and out of spite the son went and became an employee for Ferrari bodyshop... The old man told my parents his son was an idiot, and that working for Ferrari was a good enough punishment for someone that didnt have good enough work ethic and cut corners instead of doing proper craftmanship😂😂😂and i understood years later when we were invited on their sea front property💰💰💰

[@bear1245]

Both sound like tossers

[@tomboysupremacist]

everyone messes up sometimes

[@THECONTROVERSIALCYCLIST]

I loved watching this.

[@waffleman7558]

That's a really good job, you'll never be able to get all those little creases out. The skinner on the top is beautiful work

[@TheRealAaronWitchey]

OMG, THANK YOU!!! I was wondering how I was pulling the metal out of the back of my Golf... This will work!

[@AustriackiMalarz39]

Your golf should be at scrapyard

[@tomboysupremacist]

​@@AustriackiMalarz39such hatred for the golf

[@rogermaddox9902]

The sander sounded like a screaming chip monk. 😅😂

[@outdoorslifesurvivecraft5078]

I learned how to do bodywork by restoring VW Beetles. Only straight line on those things is the rocker panels and the only thing that flat is the doors.

[@Annasupari]

Removing a good condition putty and adding again!what a genius.

[@c.bawarino1707]

Solche Handwerkskunst finde ich beeindruckend 😊

[@davidradtke5166]

Wie man Steine so bearbeiten kann, dass man mörtellos Mauern und Pyramiden bauen kann in Südamerika bei den Inka, mit primitiven Werkzeugen. Das ist wahre Handwerkskunst. Ne Delle an einer rollenden Baustelle, ist nicht schwer. Da er nur ein bischen ausgedellt hat, aber sonst Spachtelmasse mit Spachtelmasse ersetzt hat.

[@PonkyKong]

People who don't understand bondo have zero rebuilds under their belt.

[@chloeleedow7250]

Love a nice combi be interested to see this finished 😍

[@luisjuarez9265]

Man! What a beautiful way to work! Greetings from México!

[@Hassan-Alnajjar]

So after few years you will repeat the same process?!

[@user-il8gc2bk3x]

Why?

[@Hassan-Alnajjar]

@@user-il8gc2bk3x because in the video he removed the old paste & added a new one!

[@SXSPRIME]

Unlikely

[@bondovwvw]

Where he failed is putting the bondo over the dye. That's going to be a problem.

[@padavan5427]

просто потом вварит кусок металла на ржавое место шпаклевки

[@noelstripp2369]

You forgot the etch primer first

[@PluschikovAF]

Вы имели ввиду кислотный грунт?

[@SXSPRIME]

Not necessary

[@aaronnoyb]

​@@SXSPRIMEThe video was of a repair, required because of rust under the bondo and you say priming isn't necessary. Necessary comes down to how long you want the repair to last and how much you care.

[@MussoliniG59]

Dude literally welded the stud with his bare hand. TANK

[@vladimsifonov7282]

Мы в нулевые разводили шпатлю на куске стекла. Которое переодически мыли под проточной водой. Прогресс не стоит на месте, сейчас разводят на куске картонной коробки.

[@user-zh3bz4oy2l]

Ага. А потом будут на кирпиче…..

[@arielbertero472]

Artistas de la masilla😂

[@marcoslinsalatta6411]

Exceleente trabajo no importa el ( metodo) sino el resultado que es optimoo!!!!!! Congraats.!!!!!

[@VW_ADVENTURER42069]

Doooope!!! Nice job dude!

[@tevhidedavetedogru724]

Küçücük bölgeye bir sürü hasar verdi teşekkür ederiz

[@user-pl4eu5sl6e]

Загадали всю природу своей химией

[@arnoldocaceres1074]

Wow...éstas SI son obras maestras...no dejes de subir videos asi👏🏼👏🏼👏🏼

[@luisahumada6081]

Mi papá era desabollador... Un verdadero artesano de la Chapa...😊

[@chrisvasquezsr6867]

Solid work 👊🏼

[@sergiodonado3085]

El arte de la pintura y la soldadura van de la mano es muy hermoso trabajar los metales y dar formas y colores es maravilloso 😮😊❤

[@badgerpa9]

Sweet clean up job. Now they can take it out and drive slower than all other traffic on the road, lol.

[@piccininpiccinin8420]

Merci d'avoir enlevé tout ce travail de maçonnerie préalablement fait ! 😉 Ce combi va rouler plus vite maintenant , plus léger ! 😊 👍

[@relentlessshillstomper114]

I think this person was being sarcastic. I found it very funny......bravo!

[@rockyramirez1571]

Wow that’s amazing that u did that yourself

[@nathansharma87]

Awesome short

[@gpena383]

When you mixed the filler on cardboard it's was done for me. 😂

[@justicilya]

Love this work ...amazing color

[@clbwpgmb]

NEVER mix body filler on cardboard. I was a regional technical rep for NAPA Auto Parts' paint supply department, and the hardest thing I had to retrain bodymen on was this very issue. The cardboard is porous and will soak up/absorb the resin out of the bondo, making it more brittle. Please people, don't use cardboard!!!!!!!!

[@ClaudioRodrigues-eg5bt]

Parabéns irmão arrasou na restauração desse veículo aí

[@cuauhtemocmg4299]

Es un arte el trabajar la lamina y volverlo a dejar como si no paso nada.un arte marstro.

[@toomasmetsniit9649]

😂Good idea 🤣 good work ✌️

[@J4060]

Sweet van, mate.

[@nickyeary4960]

That nail trick is genius lol Stud guns are cheap but cheap isn’t always good

[@ulysseperez4606]

All that trouble for that spot 😂 come I. Dude!!

[@montepr803]

The guide coat caught me off guard.

[@123fourfive5]

From alot of bog to a little less bog

[@gilsan769]

good job bro!!!

[@dmitrikorobeinikov9400]

Nice! Great job!

[@ricardojorgesilvaalmeida6595]

ScoobyDoo in happy 😂

[@TalentedOnion]

Another episode of, is it cake. It wasn't cake. 🎉

[@pierre-victorgournet9694]

I really think it was a job for me, kust incredible

[@barrymantelli8011]

looks beautiful

[@bunabuna9287]

Cracking job 👏

[@blightstuff2629]

Very skilled

[@eliezerojunior]

First I thought it was a wall haha

[@MinisterJokes]

How long is your wait list? My old school Impala needs this treatment!

[@wolftmfg]

Vau Wee Transporter Zwei. Nice job 👍

[@summersol5]

No idea what's being done. The asmr is the best.

[@brandonmitchell4295]

@FunkFPV will love this video

[@paoloperreca7672]

Very professional

[@VillageIdiot85]

i see what was needing done,and on a budget ,its good as far as us normal bodywork peeps can see,everyone commenting are car resto experts it seems..I wouldnt post a vid like this,but whatever floats your boat and the viewers an good luck with your channel.

[@slaugh77ify]

Nice job!!!

[@NickTatorship.]

The main problem with this is the welding of the screw to the panel it's the wrong tool for the job. Use a stud welder and a slide hammer. welding on panels like that it's easy to warp the panel and burn through if your inexperienced working with it.

[@johngrefer9799]

Should have put short strand fiberglass in with that bondo

[@rushpycak2037]

Когда смешиваешь шпатлю на картоне - имей ввиду, что теряешь часть полиэфирки - она впитывается

[@JamesBond-ip6pl]

There’s nothing I hate more on the job than fixing someone else’s work.

[@Mat.McEntyre]

Use a wider spreader and a longer block

[@williamcote-dube9931]

That is the only way, a dent should be repaired, well done!

[@mattjrpickle2007]

You forgot etch prime for the metal. Bondo absorbs moisture this will rust.

[@ZOLOTOE_RUNO]

КЛАСС РАБОТА, РЕАЛЬНЫЙ МАСТЕР СВОЕГО ДЕЛА 👍🖐

[@Timothy-gm5ow]

Well done

[@mindlessthought3296]

"that will be $3000" xDD

[@sebastienseb919]

Excellent. There was too much plastic filler in the beginning.

[@user-nc5ce9iv1v]

Nice van !

[@happenstancially4132]

Simply beautiful

[@davidsprod529]

True repair man

[@thegoodlookinorange1986]

Went from Bondno to ohhh yeeaaah 😊

[@matveymishmail]

Спасибо за идею бюджетного выпрямления

[@RA-gj8ud]

Убрать от шпакли, чтоб новой шпакли положить 😅😂❤*гениально!!! 😂😂😂😂

[@eddieabernathy5998]

I have a 91 Vanagon carat. she could definitely use a little buddy work🛠

[@SuperMickey57]

That's how the first repair should have been done. Too many people think Bondo is sculpting compound.

[@BartBade]

I don't know why I watched it 5 times, Wait🤚, 6 times

[@robertbradford7892]

That's how it's done...💯

[@brunetkariy1325]

Professional 👏👏👏

[@davidnelson3411]

Great job.

[@user-md3jd3wq3z]

The second putty was U-pol Dolpfin glaze I suppose

[@Vladle2099]

That was a thick layer before.

[@murderingmendaciousness2257]

you see how it looked like bolts and screw arms etc.

[@tonymontana9240]

Like a fucking pro!! Good stuff