From Joinery to Woodturning: 2-Hour Showcase of Crafting Brilliance! | Compilation

[@mrturnbull9504]

If you try to cut a hole only using the jigsaw, remember to make sure the orbital setting is turned to 0 or you will jump, bend and snap blades 👍

[@CaptivatingEveryDay]

very helpful

[@MitchRuth]

Very inspirational. Thanks!

[@josemanuelcasadosapina8839]

Es maravilloso ver Faustino jugar. Desde aquí felicitarlo y desearle toda una vida de éxitos,.aunque ya lo ha conseguido. Enhorabuena Faustino por ese gran título de Maestro Internacional más joven de la historia. BRAVO, BRAVO.

[@itsROMPERS...]

I love to see the elaborate, labor-intensive processes that end up in really ordinary, dull applications, like a fruit bowl, or a cheesy pendant lamp! Hilarious!

[@alfonsoramos4041]

Espectacular ¡¡ ver como manejan las ideas y la maquinaria, he quedado alucinado, Muchas gracias por enseñarnos, seguid así, Saludos,

[@trezentositreze4963]

Vejo sempre as suas apresentações individualmente. Vê-las todas agrupadas foi muito satisfatório.

[@josefidelixalves2737]

Parabéns a vcs todos ❤❤❤

[@ttoddh1]

Some are beyond words. This is fantastic! Thaaanks for sharing.

[@grahamclark8050]

posativeaty people. it's great to see people try and helping others. thanks again. 👍

[@dieterh.2497]

Tolles Projekt, könnte mir auch vorstellen sowas zu bauen.

[@caraldru82]

Muy muy bueno tu trabajo!!!

[@tsumugi_KTBK]

For some reason I could watch it forever. 😀

[@philliparudolph9595]

WARNING to anyone thinking of cutting up CDs, the dust from these things can be DEADLY

[@trezentositreze4963]

Apreciei muito as diversas apresentações, Claras e Objetivas

[@jorgealfredomendezmartinez2735]

Excelente demostración con la sugerencia que la media caña se debió introducir y pegar al tubo que recibe el flujo.

[@alejandroconstant1652]

Perfect

[@askarayom3422]

Genius❤

[@SSDIY77168]

your video is so good idea

[@howardnd9043]

DAGAN is a true American Jewel. I love her wit.

[@aeromodellismodinamicoaere3829]

Well done, original ideas and excellent realization, keep going, don't give upv👍🏻

[@bobsmith693]

I have not seen before, and I have learned a lot from this. Probably more like me that have learned from this. You don”t have to watch them.

[@KevinWoodman97]

i love it

[@JohnKatchezoPhiri]

You're just a professional artisan

[@reedwi1963]

I love the hanging lamp 11min in😊😊😊

[@JanHendriks-vp7ig]

Hi, I thought of making a steam chamber too. But I didn't think PVC would work as it gets soft and floppy when hot. Is yours a PVC chamber?

[@dantheman9919]

To the second “life hack”, pocket hole jigs exist.

[@mnjmedia1707]

Gotta be an easier way to make a wooden spoon. That look medieval.

[@iconiaiconia3733]

👍👍👍

[@zelihaolur5368]

❤❤❤

[@-LeClown]

top👍

[@graemefrost5861]

Great craftmanship but you can tell ge doesn't think of the dusting and cleaning, for instance look at the fruit bowl and then think of cleaning it?

[@kw0s]

I see you are very skillful with wood work and have many nice machines. Is 20:30 attached to sheetrock? I would attach to wood studs and have 2 * 45 degree braces underneath. From stud to the charger table. I have the same concern with 22:20 stairs. I would make a permanent stairs, none moveable and attached to the wall studs.

[@8kplumber631]

If you want to get your hands or fingers chopped to make a wooden spoon then go ahead and use this method

[@Mariusz803]

What is the water he's spraying for before gluing?

[@austinfoster2954]

I could be wrong but I believe it's an activator for the glue. It makes it so the glue dries pretty much instantly instead of waiting for normal dry time.

[@lennierichardson1387]

Are plans available? If really like to build a couple of these.

[@cmja2012]

Well thats 28 min ill never get back

[@davey2k12]

The locking systems @ 1:42:00 I'd of used nails and electromagnet to unlock it with battery but that's good too😅

[@tronghungdao251]

❤👌👍👏🎉🎉🎉

[@tylernelson3818]

What is the tool he’s using for the making the stairs after he hammers in the anchors?

[@itsROMPERS...]

Anchoring stairs with Molly bolts. Ok.

[@sevenohm3375]

God be with you if by chance you’ve hired this guy as your general contractor. I swear it’s just part of this guys persona. Does vcg really exist outside of the world of make believe? Reinstate the obvious like you’re dj kaled and shizzle. Love you guys.

[@haidi51]

Adernendhülsen verwenden und nicht die Drahtenden verlöten Use wire end ferrules and do not solder the wire ends

[@garybrown9719]

Please stop using gloves i also lost my hand when my glove got caught while sanding on a Lathe 😢

[@martinsendker4599]

Die Stichsäge zur schleifmaschiene umzurüsten ist so keine gute Idee, da der Schleifklotz zuviel Masse hat und die Lagerung der Säge zerstört !

[@nickc7320]

Why didn't he just put the dust in the hole instead of on the side and pushing it in

[@dr.ignacioglez.9677]

What is the spray that he is using in the video?

[@mrturnbull9504]

Screw spoon making idea is terrible...just buy a carving disc for grinder...much faster, better and SAFER!!

[@TheOGG1]

Really? All that for the spoon lmao.

[@franzstadelmann]

also diese Begleitmusik ist ja eine Zumutung. Schade,aber ich schaue ihre Videos nur noch tonlos.

[@SalemTV59]

La musique est tellement chiante que je coupe le son 😂

[@pedrosavi287]

Pedro Savi

[@alaaabbas3486]

I used to love watching your videos, but all of them have become repeated videos and there is nothing new and you are laughing at us with a different title and they are the same old videos. I do not understand the reason for not uploading new videos, including them!

[@hankhill9195]

I saw him laughing in your face man.

[@Serris412]

You just gonna let that happen?

[@roninthegoat2810]

The reason? He’s still making probably even more money with little to no effort

[@barrymathison]

You know I wish you would talk and explain it what you're doing. A little more those beginners. We don't have nothing to go by so we need your explanations. I mean you're obviously not a beginner. I wouldn't call you master, but you're certainly not a beginner. You're up there somewhere. Sorry, I don't mean to insult or anything if it sounded that way, but I hope I get as good as you someday. And I asked you a question. Oh well. Got an old love seat. I don't need it anymore. It's not in good shape. It's out in my shed. I'd like to tear it apart and see what kind of wood is inside. Just so if the wood you know if you got any advice for that you can tell me what's inside of her. If he's worth my time I'd appreciate it. Thank you...

[@TheNyhm1]

Low quality all the way

[@dankaynie]

Risking sight and limb to make a spoon is ridiculous - do not try this!

[@bobbyogle]

It’s funny how you tube channels take videos from other people

[@JoseAruquipa-b3f]

Nosotros fomentamos a eso y hacer más ricos

[@acrocha1222]

Music is super annoying

[@MrSuleymantekin]

so viel verschwendung schade

[@dreletronica]

Super bad music ! Please turn off . good bye!

[@סיפוריםמפהומשם-רחלפארן]

O[

[@pro100bbcdesignfreelancers5]

The video if too long. It`s not convenient to find a separate idea in it in future. I dislike such a format. DISLIKE. Sorry!

[@contacto2379]

No cabe duda... haciendo puras cosas inútiles !!!!!!!! pobre sociedad.

[@DiegoDiaz-fn4tj]

Tonterías nada más que hacer

[@donaldphillips2648]

Have you ever seen a batch of more useless projects in your life??

[@beastmodejelly8654]

4:48 is the unsafest thing I've seen in a while

[@grahamclark8050]

that is some wonderful ideas. never let anyone tell you any different. wonderful to watch. great work. keep the videos coming. 👍👍😉😉