From the Workbench with Doug - Multi-Needle Thread Tension Adjustments

[@sandyraqueldeleon3788]

Thank you !! Finally got my tension right!

[@barbsmith940]

Extremely helpful!! Thanks and please keep your videos coming - very helpful!!!!

[@LindaWilliams-o2u]

Thank you Doug! You are the best. Problem solved!

[@Petra-nf7ip]

Thank you, you just helped me fix my multi-needle!! God Bless You!!

[@mattieymami]

Thank you. Short, sweet, to the point. My issue has been resolved!!

[@wendymcculley7851]

Great information. Just what I was looking for.

[@kathythompson8057]

Thank you! I’m going to check my lines right now. I have one needle that always gives me grief. Hopefully this will fix the problem.

[@dorisamstutz5888]

Great info I have two machines a bmp6 and a bmp8 do they both take 2 gray lines?

[@babylocksewing]

Thanks for your question. The BMP6 and BMP8 work best when the tension is adjusted with two grey lines above the white tension base.

[@NinjaNeko93]

​@babylocksewing if we see three gray lines on the bmp 8 does that mean it is too loose or too tight?

[@dorothytyler7011]

No mention of the post tension guides through which the thread passes after it goes around the tension knobs. Do they also go as loose as possible? Thanks.

[@dougthompson2958]

Dorothy, you would start out with those as loose as possible as well. You would only adjust the pre-tension above the unit if needed.

[@judygoshy7843]

What fabric do you hoop for this tension test?

[@babylocksewing]

It’s best to test with the fabric and stabilizer you’ll be using for the project. :)

[@tieshabanks6029]

i have a Baby Lock Venture and I can't get the side to look like yours and I have tried. I have a very skinny line on both sides. Which direction should I turn to get wider sides?

[@babylocksewing]

Please connect with our consumer support hotline: [phone] or email at [e-mail] as they can trouble shoot with you.